Recent developments in cleanup technologies

Traditional environmental investigations are expensive and time-consuming, involving heavy drilling equipment, several intermediate processes, and analyses at off-site commercial laboratories. New, relatively inexpensive in situ sampling surveys can now quickly generate preliminary data in the field, helping to analyze soil gas and soil and groundwater forvolatile organic compounds (VOCs). Many of the companies that do them now also provide their own mobile laboratories for delineating contaminant plumes more quickly and at less cost than the traditional methods and guiding the placement of groundwater monitoring wells and soil borings. This column describes the main in situ sampling surveys available today, calculates their costs per sample, explores their advantages and disadvantages for remedial investigations, and offers advice on how to carry them out.     

Passive to active tie‐in for soil gas surveys: Improved technique for source‐area,spatial variability,remediation‐monitoring,and vapor‐intrusion assessment

The mass‐to‐concentration tie‐in (MtoC Tie‐In) correlates passive soil gas (PSG) data in mass to active soil gas data in concentration determined by the US EPA Method TO‐17 or TO‐15. Passive soil gas surveys consist of rapid deployment of hydrophobic sorbents (dozens to several hundred locations typically installed in one day) to a depth of six inches to three feet in a grid pattern with exposure in the field from three days to two weeks to target a wide variety of organic compounds. A power function is used on a compound‐to‐compound basis to correlate spatially varying mass (nanograms) from selected locations within a passive soil gas survey to concentration (µg/m³) at those same locations. The correlation from selected PSG locations is applied to the remainder of the PSG grid. The MtoC Tie‐In correlations provide added value to a PSG survey, with the PSG data then used to estimate risk throughout the limits of the investigation for quantitative assessment. The results from a site in northern California show the MtoC Tie‐In correlations for both benzene and total petroleum hydrocarbons (TPH). The correlations are applied on a compound‐to‐compound basis to the remaining locations in the PSG grid to provide an estimate of concentration that can be used for comparison to risk/screening levels or fate‐and‐transport diagnostic tools (partitioning equations, solubility laws, etc.). An example of how the correlations are applied is presented in tabular form. The results from a chlorinated solvent survey show the MtoC Tie‐In correlation from a site in Maryland for tetrachloroethene (PCE). In this instance, there was a near‐perfect relationship between the PSG mass and the active soil gas concentration (R² value of 1). The concentration estimated throughout a PSG grid enables a vast new realm of interpretive power at sites. Several other sites are discussed, including an example application for groundwater. © 2009 Wiley Periodicals, Inc.     

Tracking of release and remediation progress from large pipeline break east of Dallas,Texas: Protection of Lake Tawakoni water supply

A gasoline pipeline owned by Explorer Pipeline Company ruptured leaking methyl tertiary butyl ether (MTBE), a gasoline additive, into a creek and lake that the city of Dallas used as a water source. Because of the contamination, the city had to build a pipeline (nine feet in diameter, over two and three‐quarters of a mile in length, and built in three months) to another lake, at a cost of about $9 million. The volume of the release was estimated at 1.7 million gallons of gasoline containing MTBE at 9 percent per volume. Thousands of soil, water, and groundwater samples were taken to track the MTBE plume as it migrated from the spill site, through almost 30 miles of creek and throughout a lake containing 700,000 acre‐feet (228 billion gallons) of water. Four years after the spill, MTBE remains throughout the groundwater system, primarily in the drainage basin along the almost 30 miles of creek. This article focuses on the detailed tracking of all sampling data and the impact that the ongoing threat of MTBE contamination had on the water supplier. © 2006 Wiley Periodicals, Inc.     

Chlorinated Hydrocarbon–Contaminated Site Investigation With Optimized 3D‐CSIA Approach

An optimized “Three‐Dimensional Compound Specific Isotope Analysis (3D‐CSIA)'' investigation was conducted at a chlorinated hydrocarbon–contaminated site in order to (1) determine if multiple onsite sources of groundwater contamination existed and (2) demonstrate the cost‐effectiveness of applying isotope fingerprinting at such a complex contaminated site. Previous groundwater investigations identified chlorinated hydrocarbons at levels that significantly exceed drinking‐water standards but failed to determine the source(s) of contamination due to the lack of vadose‐zone contamination and the absence of groundwater contaminants in shallow portions of the surficial aquifer. To better understand the contaminant source(s), groundwater samples were taken and tested for both the presence of chlorinated hydrocarbons and their isotopic signatures of ¹³C/¹²C, ³⁷Cl/³⁵Cl, and ²H/¹H. A site investigation with an optimized 3D‐CSIA approach revealed multiple chlorinated hydrocarbon releases from different sources, which was also cost‐effective considering the new lines of evidence of target contaminants obtained with the 3D‐CSIA approach instead of any traditional fingerprinting approaches. In addition, the 3D‐CSIA results inferred in situ bioremediation of chlorinated hydrocarbons would be feasible at the site. © 2013 Wiley Periodicals, Inc.     

Cost-effective contaminant plume delineation using multilevel drive point samplers

Over the past several years, environmental professionals have sought new and innovative field techniques to allow on-site plume delineation and in-field location of monitoring wells. One technique adopted for site characterization is the multilevel drive point sampler (MLDPS). This technology allows sampling of soil gas and groundwater and measurement of aquifer permeability. MLDPSs offer a cost-effective solution to the high cost of plume delineation by providing in-field data for decisions on monitoring well location and depth. MLDPS technologies can increase the effectiveness of monitoring well installation programs, decrease the cost of site characterization, and accelerate the time between initial site assessment and implementation of a remediation program. MLDPS technologies offer distinct advantages over other field techniques, and a cost comparison is offered. A case study describing application of the MLDPS to the delineation of a TCE-contaminated plume is described.     

Successful unsaturated zone treatment of PCE with sodium permanganate

In situ chemical oxidation (ISCO) with permanganate has been widely used for soil and groundwater treatment in the saturated zone. Due to the challenges associated with achieving effective distribution and retention in the unsaturated zone, there is a great interest in developing alternative injection technologies that increase the success of vadose‐zone treatment. The subject site is an active dry cleaner located in Topeka, Kansas. A relatively small area of residual contamination adjacent to the active facility building has been identified as the source of a large sitewide groundwater contamination plume with off‐site receptors. The Kansas Department of Health and Environment (KDHE) currently manages site remedial efforts and chose to pilot‐test ISCO with permanganate for the reduction of perchloroethene (PCE) soil concentrations within the source area. KDHE subsequently contracted Burns & McDonnell to design and implement an ISCO pilot test. A treatability study was performed by Carus Corporation to determine permanganate‐soil‐oxidant‐demand (PSOD) and the required oxidant dosing for the site. The pilot‐test design included an ISCO injection approach that consisted of injecting aqueous sodium permanganate using direct‐push technology with a sealed borehole. During the pilot test, approximately 12,500 pounds of sodium permanganate were injected at a concentration of approximately 3 percent (by weight) using the methods described above. Confirmation soil sampling conducted after the injection event indicated PCE reductions ranging from approximately 79 to more than 99 percent. A follow‐up treatment, consisting of the injection of an additional 6,200 pounds of sodium permanganate, was implemented to address residual soil impacts remaining in the soil source zone. Confirmation soil sampling conducted after the treatment indicated a PCE reduction of greater than 90 percent at the most heavily impacted sample location and additional reductions in four of the six samples collected. © 2009 Wiley Periodicals, Inc.     

Chloroethene dechlorination in acidic groundwater: Implications for combining fenton's treatment with natural attenuation

A sulfuric acid leak in 1988 at a chloroethene‐contaminated groundwater site at the Naval Air Station Pensacola has resulted in a long‐term record of the behavior of chloroethene contaminants at low pH and a unique opportunity to assess the potential impact of source area treatment technologies, which involve acidification of the groundwater environment (e.g., Fenton's‐based in situ chemical oxidation), on downgradient natural attenuation processes. The greater than 75 percent decrease in trichloroethene (TCE) concentrations and the shift in contaminant composition toward predominantly reduced daughter products (dichloroethene [DCE] and vinyl chloride [VC]) that were observed along a 30‐m groundwater flow path characterized by highly acidic conditions (pH = 3.5 ± 0.4) demonstrated that chloroethene reductive dechlorination can continue to be efficient under persistent acidic conditions. The detection of Dehalococcoides‐type bacteria within the sulfuric acid/chloroethene co‐contaminant plume was consistent with biotic chloroethene reductive dechlorination. Microcosm studies conducted with ¹⁴C‐TCE and ¹⁴C‐VC confirmed biotic reductive dechlorination in sediment collected from within the sulfuric acid/chloroethene co‐contaminant plume. Microcosms prepared with sediment from two other locations within the acid plume, however, demonstrated only a limited mineralization to ¹⁴CO₂ and ¹⁴CO, which was attributed to abiotic degradation because no significant differences were observed between experimental and autoclaved control treatments. These results indicated that biotic and abiotic mechanisms contributed to chloroethene attenuation in the acid plume at NAS Pensacola and that remediation techniques involving acidification of the groundwater environment (e.g., Fenton's‐based source area treatment) do not necessarily preclude efficient chloroethene degradation. © 2007 Wiley Periodicals, Inc.     

Expediting sustainable brownfields redevelopment by applying Triad using the membrane interface probe

Redevelopment and reuse plans are often based upon an expedited delineation and remediation life cycle, since delayed reuse usually has economic consequences. It has also become increasingly important to utilize sustainable practices to achieve investigation and remediation goals. In this article, the Triad approach is used to expedite the delineation of a source area within a municipal landfill to complete the remedial effort prior to construction of an urban civic center. The Triad approach uses the three elements of systematic project planning, dynamic work strategy, and real‐time measurement to expedite site characterization (Interstate Technology and Regulatory Council, 2003). In this article, the Triad sampling strategy consisted of two phases. The first phase included in situ screening of soil and groundwater using the membrane interface probe (MIP), and the second phase included confirmatory sampling via vertical profiles in the soil and groundwater. This study found that, using the MIP in a dynamic sampling strategy, a critical element of the Triad approach, combined with the proper placement of confirmatory samples, significantly reduced overall project cost and will expedite the site redevelopment. The use of the Triad approach also contributed to the integration of green and sustainable practices into the project. © 2010 Wiley Periodicals, Inc.     

Pure oxygen-enhanced biodegradation for contaminated groundwater

On-site oxygen generation was chosen as the most effective and efficient source of pure oxygen for enhancing biodegradation at a hydrocarbon-contaminated oil and gas well site in northern Michigan. Contaminants include benzene, toluene, ethylbenzene, and xylenes released through natural gas dehydration practices that were halted in 1985. Free product and contaminated soil were completely removed from the source area in spring 1989, leaving only the groundwater plume for further remediation. This article discusses the project's two phases—a purge and treat system and the pure-oxygen bioremediation system—each costing $75,000. It also details the combined system's technical elements (including purge and monitoring wells, oxygen generator, and drainfield), and cleanup results (including how pure oxygen has helped destroy contaminants, not merely move them to other media).     

Full‐scale in‐situ biobarrier demonstration for containment and treatment of MTBE

The Naval Facilities Engineering Service Center (NFESC), Arizona State University, and Equilon Enterprises LLC are partners in an innovative Environmental Security Technology Certification Program cleanup technology demonstration designed to contain dissolved MTBE groundwater plumes. This full‐scale demonstration is being performed to test the use of an oxygenated biobarrier at Naval Base Ventura County, in Port Hueneme, California. Surprisingly, few cost‐effective in‐situ remedies are known for the cleanup of MTBE‐impacted aquifers, and remediation by engineered in‐situ biodegradation was thought to be an unlikely candidate just a few years ago. This project demonstrates that MTBE‐impacted groundwater can be remediated in‐situ through engineered aerobic biodegradation under natural‐flow conditions. With respect to economics, the installation and operation costs associated with this innovative biobarrier system are at least 50 percent lower than those of a conventional pump and treat system. Furthermore, although it has been suggested that aerobic MTBE biodegradation will not occur in mixed MTBE‐BTEX dissolved plumes, this project demonstrates otherwise. The biobarrier system discussed in this article is the largest of its kind ever implemented, spanning a dissolved MTBE plume that is over 500 feet wide. This biobarrier system has achieved an in‐situ treatment efficiency of greater than 99.9 percent for dissolved MTBE and BTEX concentrations. Perhaps of greater importance is the fact that extensive performance data has been collected, which is being used to generate best‐practice design and cost information for this biobarrier technology. © 2001 John Wiley & Sons, Inc.     

Evaluation of a vertical frozen soil barrier at oak ridge national laboratory

Arctic Foundations, Inc. (AFI), of Anchorage, Alaska, has developed a freeze barrier system designed to hydraulically isolate a contaminant source area. The system can be used for long‐term or temporary containment of groundwater until appropriate remediation techniques can be applied. The technology was evaluated under the United States Environmental Protection Agency's (EPA's) Superfund Innovative Technology Evaluation (SITE) program at the United States Department of Energy's (DOE's) Oak Ridge National Laboratory (ORNL) facility in Oak Ridge, Tennessee. For the demonstration, an array of freeze pipes called “thermoprobes” was installed to a depth of 30 feet below ground surface around a former waste collection pond and keyed into bedrock. The system was used to establish an impermeable frozen soil barrier to hydraulically isolate the pond. Demonstration personnel collected independent data to evaluate the technology's performance. A variety of evaluation tools were used—including a groundwater dye tracing investigation, groundwater elevation measurements, and subsurface soil temperature data—to determine the effectiveness of the freeze barrier system in preventing horizontal groundwater flow beyond the limits of the frozen soil barrier. Data collected during the demonstration provided evidence that the frozen soil barrier was effective in hydraulically isolating the pond.     

Smart Characterization—An Integrated Approach for Evaluating a Complex 1,4‐Dioxane Site

Smart characterization approaches apply the latest high‐resolution site characterization methods to find the contaminant mass flux, by integrating relative permeability mapping, classical hydrostratigraphy interpretation, and high‐density groundwater and saturated soil sampling. The key factor that makes Smart characterization different is the application of quantitative saturated soil sampling in less permeable slow advection and storage zones to diagnose plume maturity and understand its implications for remedy selection and performance. Because direct sensing tools like the membrane interface probe are capable of providing screening‐level assessments for hydrocarbons and chlorinated solvents in storage zones, but not 1,4‐dioxane, the recommended Smart approach involves application of specialized high‐capacity mobile laboratories or rapid turn‐around using fixed commercial labs. In addition to the benefit of rapidly characterizing sites, Smart characterization facilitates a flux‐based conceptual site model, which allows stakeholders to focus remedies on the mobile portion of the contaminant mass or, in effect, the mass that matters. Through systematic planning and implementation, predesign characterization can be completed to optimize source and plume remedy strategies, balancing investment in Smart characterization with reductions in total life‐cycle costs to ensure that an appropriate return on investigation is obtained.  © 2016 Wiley Periodicals, Inc.     

Successful combination of remediation techniques at a former silver factory

A residential area that was formerly part of a silver factory site severely contaminated with chlorinated solvents was remediated using an in situ electro‐bioreclamation technique. Electro‐bioreclamation is a method for heating soil and groundwater combined with soil vapor and low‐yield groundwater extraction and enhanced reductive dechlorination (ERD). During the first two years of remediation in the source area (the intensive phase), a total of 80 kg of volatile organic compounds (VOCs) was removed by heating combined with ERD. After another two years of ERD in the source and plume areas (the attenuation phase), the VOC concentrations were reduced to a level below 100 μg/L in groundwater. Given these satisfying results, electro‐reclamation in combination with ERD turned out to be a successful in situ remediation technique for removing VOCs. © 2006Wiley Periodicals, Inc.     

Facilitating brownfields transactions using Triad and environmental insurance

A significant hindrance to reuse of brownfields properties is the risk associated with redevelopment,specifically the uncertainty associated with environmental cleanup. This article explores an approach tomanaging environmental risk through a combination of risk quantification, environmental insurance, and theTriad Approach to site sampling and data interpretation. The expected costs of environmental liabilities areestimated using the Marsh Peer ReviewSM risk quantification process that employs statistical techniques andhighly experienced technical staff. The outputs of the process indicate premiums and attachment points forinsurance products, but they also point to “critical uncertainties” that drive the insurancepremiums. Insurance premiums are often linked to site delineation deficiencies, such as the magnitude ofimpacted soil or the size of a groundwater plume. The Triad Approach is an integrated site characterizationprocess developed by the Environmental Protection Agency that combines systematic planning, dynamic or adaptivefield decision making and field analytical methods (FAMs). The real‐time data produced by FAMsallow for in‐field resolution of uncertainty about sample location, which in turn provides morerepresentative delineation of contaminant distribution. The trade‐off of using slightly less accuratebut substantially lower cost FAMs is an increase in sampling frequency or density, thereby reducing the risk ofincomplete detection or delineation while yielding a “data set” that is more powerful than fewerindividual data points analyzed through traditional methods. Employing the Triad Approach to analyze the“critical uncertainties” identified in the Peer Review Process can impact insurance premiums andallow for better terms of coverage. The combination of using the Triad Approach and environmental insuranceproducts can lead to more predictable and profitable Brownfield transactions. © 2003 Wiley Peridicals,Inc.     

Screening method for locating groundwater monitoring wells

The traditional approach to characterizing the extent of groundwater contamination is often phased over a period of several years. A screening method has been developed that allows the investigation process to be reduced to a single phase. Existing data are used to develop a preliminary estimate of the extent of contamination, which is refined by the screening method using groundwater data collected and analyzed in the field. The screening method is applicable at sites with volatile organic compound contamination. Groundwater samples are collected using direct push or drill rig assisted methods, and the groundwater headspace gas is analyzed for the contaminant of interest. The refined estimate is used to locate all of the groundwater monitoring wells necessary to finalize the estimate of the extent of contamination. Therefore, only one investigation phase is required, and time and cost savings are realized with respect to the traditional multiphase approach. The screening method was successfully applied at a CERCLA site in Nebraska with two distinct plumes of TCE-contaminated groundwater. The Nebraska remedial investigation was completed approximately 18 months earlier than the estimated completion of a comparable phased investigation, with a corresponding cost reduction estimated at approximately 10 percent. If data from the screening method were used instead of data from monitoring wells, the estimated cost savings would be over 50 percent. Additional applications and evaluations may lead to industry and regulatory acceptance of the method as a primary characterization tool.     

Seven‐year performance evaluation of a permeable reactive barrier

In June and July 2001, the Massachusetts Department of Environmental Protection (MassDEP) installed a permeable reactive barrier (PRB) to treat a groundwater plume of chlorinated solvents migrating from an electronics manufacturer in Needham, Massachusetts, toward the Town of Wellesley's Rosemary Valley wellfield. The primary contaminant of concern at the site is trichloroethene (TCE), which at the time had a maximum average concentration of approximately 300 micrograms per liter directly upgradient of the PRB. The PRB is composed of a mix of granular zero‐valent iron (ZVI) filings and sand with a pure‐iron thickness design along its length between 0.5 and 1.7 feet. The PRB was designed to intercept the entire overburden plume; a previous study had indicated that the contaminant flux in the bedrock was negligible. Groundwater samples have been collected from monitoring wells upgradient and downgradient of the PRB on a quarterly basis since installation of the PRB. Inorganic parameters, such as oxidation/reduction potential, dissolved oxygen, and pH, are also measured to determine stabilization during the sampling process. Review of the analytical data indicates that the PRB is significantly reducing TCE concentrations along its length. However, in two discrete locations, TCE concentrations show little decrease in the downgradient monitoring wells, particularly in the deep overburden. Data available for review include the organic and inorganic analytical data, slug test results from nearby bedrock and overburden wells, and upgradient and downgradient groundwater‐level information. These data aid in refining the conceptual site model for the PRB, evaluating its performance, and provide clues as to the reasons for the PRB's underperformance in certain locations. © 2008 Wiley Periodicals, Inc.     

Assessment of in situ thermal treatment for chlorinated organic source zones

The East Gate Disposal Yard (EGDY) at Fort Lewis is the source of a large trichloroethene (TCE) plume at this military installation. Source reduction using thermal treatment was applied using electrical resistance heating. A total of about 5,800 kg of TCE‐equivalent volatile organic compounds (VOCs; TCE and dichloroethene) was extracted during thermal treatment of the three zones selected for source reduction. Pretreatment groundwater TCE concentrations were measured up to 100 ppm. Posttreatment groundwater TCE concentrations within the treatment zones averaged less than 100 ppb. Posttreatment soil TCE concentrations decreased by over 96 percent compared to pretreatment soil concentrations. The overall contaminant flux from EGDY was reduced by an estimated 60 to 90 percent by the source reduction effort. The traditional and new techniques for site characterization and remediation performance monitoring applied at EGDY provide insight for installing, operating, monitoring, and assessing thermal treatment. © 2009 Wiley Periodicals, Inc.     

Dynamic workplans and field analytics: Metals assessment by inductively coupled plasma/optical emission spectroscopy

Hazardous waste site investigations were carried out at the Marine Corps Air Station (MCAS) in Yuma, Arizona and at Hanscom Air Force Base (HAFB) in Bedford, Massachusetts. The purpose of the first was to determine the location and extent of metals contamination throughout the base. The objective of the second was to evaluate the risk of metals contamination to groundwater from soil at three locations within the airfield. Dynamic workplans were developed and an adaptive sampling and analysis plan carried out with the data produced in the field used to support the goals of each project. An inductively coupled plasma/optical emission spectrometer (ICP/OES) was modified for field operation. A more efficient microwave digestion method and pressurized Teflon filtration system were developed for the HAFB project. Results were comparable to standard Environmental Protection Agency (EPA) methods, which must rely on two digestion procedures to recover EPA-targeted metals within the prescribed recovery range. The MCAS investigation, conducted over a five-month period, advanced the Navy's efforts from 30 months behind schedule to 18 months ahead of schedule, while the data generated at HAFB showed no risk to groundwater from metals.     

Matrix Diffusion Modeling Applied to Long‐Term Pump‐and‐Treat Data: 1. Method Development

Despite the installation in the 1980s and 1990s of hydraulic containment systems around known source zones (four slurry walls and ten pump‐and‐treat systems), trichloroethene (TCE) plumes persist in the three uppermost groundwater‐bearing units at the Middlefield‐Ellis‐Whisman (MEW) Superfund Study Area in Mountain View, California. In analyzing TCE data from 15 recovery wells, the observed TCE mass discharge decreased less than an order of magnitude over a 10‐year period despite the removal of an average of 11 pore volumes of affected groundwater. Two groundwater models were applied to long‐term groundwater pump‐and‐treat data from 15 recovery wells to determine if matrix diffusion could explain the long‐term persistence of a TCE plume. The first model assumed that TCE concentrations in the plume are controlled only by advection, dispersion, and retardation (ADR model). The second model used a one‐dimensional diffusion equation in contact with two low‐permeability zones (i.e., upper and lower aquitard) to estimate the potential effects of matrix diffusion of TCE into and out of low‐permeability media in the plume. In all 15 wells, the matrix diffusion model fit the data much better than the ADR model (normalized root mean square error of 0.17 vs. 0.29; r² of 0.99 vs. 0.19), indicating that matrix diffusion is a likely contributing factor to the persistence of the TCE plume in the non‐source‐capture zones of the MEW Study Area's groundwater‐extraction wells. © 2013 Wiley Periodicals, Inc.     

Integrated bioremediation of soil and groundwater at a superfund site

The soil and two aquifers under an active lumber mill in Libby, Montana, had been contaminated from 1946 to 1969 by uncontrolled releases of creosote and pentachlorophenol (PCP). In 1983, because the contaminated surface soil and the shallower aquifer posed immediate risks to human health and the natural environment, the U.S. Environmental Protection Agency placed the site on its National Priorities List. Feasibility studies in 1987 and 1988 determined that in situ bioremediation would help clean up this aquifer and that biological treatment would help clean up the contaminated soils. This article outlines the studies that led to a 1988 EPA record of decision and details the EPA-approved remedial plan implemented starting in 1989; EPA estimates a total cost of about $15 million (in 1988 dollars). The plan involves extensive excavation and biological treatment of shallow contaminated soils in two lined and bermed land treatment units, extraction of heavily contaminated groundwater, an aboveground bioreactor treatment system, and injection of oxygenated water to the contaminant source area, as well as to other on-site areas affected by the shallower aquifer's contaminant plume.