Inventory of twenty-six combustible wastes as sources of potentially toxic elements: B,Cr, Cu,Zn, As,Sb, Ba,and Pb

Journal of Material Cycles and Waste Management - Municipal solid waste (MSW) is converted to various materials through treatment processes, which in turn distributes potentially toxic elements...     

Behavior of As,Cd, Co,Cr, Cu,Pb, Ni,and Zn at the soil/plant interface around an uncontrolled landfill (Casablanca,Morocco)

The present work undertaken in the environmental context aims to study the distribution of heavy metals in plants that grow naturally around uncontrolled landfills. The study's goal was to identify plants that can be used to remediate contaminated soils. For this purpose, 14 plants species and their rhizospheric soil samples were collected and analyzed for arsenic, cadmium, cobalt, chromium, copper, lead, nickel, and zinc by inductively coupled plasma‐atomic emission spectrometry. The results showed the presence of elevated metal concentrations in soil, many exceeding the regulatory values, and that many species exhibited an ability to accumulate multiple metals in their shoots and roots without sustaining toxicity. This was confirmed by bioconcentration and translocation factors generally higher than 1.     

Behaviour of Cd,Cr, Mn,Ni, Pb,and Zn in sewage sludge incineration by fluidised bed furnace

Cd, Cr, Mn, Ni, Pb, and Zn behaviour during sewage sludge incineration was investigated in seven pilot tests using a circulating fluidised bed furnace. Dewatered sludge at a solids concentration of 15-18% was fed to the furnace either alone (two tests) or spiked with chlorinated organic compounds (five tests). The behaviour of metals in the fluidised bed furnace was studied by comparing metal concentrations in the two main ash streams: ash separated from the cyclone immediately following the fluidised bed furnace, and fly ash recovered in the final bag filter. A metal enrichment factor was defined as the ratio of metal concentration between filter ash and cyclone ash. Only Cd and Pb showed any significant enrichment. Their enrichment factors were mainly affected by chlorine concentration in the feed sludge. To check whether simple equilibrium models may explain and predict metal behaviour, experimental data were compared with percentage of the metal vaporisation in the combustion chamber predicted using a thermodynamic model. Discrepancies between model predictions and experimental results are accounted for by considering that kinetics may be a limiting factor in the formation of metal chloride gaseous species. Due to the very short sludge residence time in the fluidised bed furnace, the gaseous compounds have little chance to evolve completely.     

Estimation of nitrogen flow change in Beijing,China, for the years 1995, 2000, and 2004

Rapid economic growth in China has led to environmental pollution. Recycling nutrients is essential for sustainable agriculture, and it is necessary to estimate the amount of available organic resources in order to achieve this. Using nitrogen as a tracer, we estimated the organic resource flows in 1995, 2000, and 2004 in Beijing. The agricultural nitrogen flow was calculated from the fertilizer, agricultural product, and byproduct flows. The livestock nitrogen flow was calculated from the feed, excretion, and stock flows. The human nitrogen flow was calculated from the food intake, excretion, and food waste flows. The amounts of recyclable organic resources were estimated from these nitrogen flows. The Daxing, Fangshan, Miyun, Shunyi, and Tongzho areas had high nitrogen loads in 2004, as did the outer suburbs, but Beijing proper had an extremely low nitrogen flow and the inner suburbs had low nitrogen flows. The estimated amount of compost that could be produced from domestic organic waste across Beijing was equivalent to 88,100 t of nitrogen. The Beijing area contains 394,100 ha of farmland, so, if the compost was applied at an equivalent of 100 kg of nitrogen per hectare, the equivalent of 48,000 t of nitrogen would be surplus.     

Integrated Environmental and Hydraulic Design of Xerias River,Corinthos, Greece,Training Works

The modern design of flood protection and training works in cases of major natural streams and creeks, requires a fine balance between a sound engineering approach in all engineering aspects on one hand, and an environmentally acceptable solution on the other. Progress in integrating environmental and hydraulic design has been achieved over the years due to different factors, like proper collaboration of engineering disciplines, hydraulic modeling enhancement, development and use of suitable materials, amelioration of the construction methods, and proper restoration and use of the affected areas. In this paper, a synopsis of the experience that has been gained by our firm over the years in designing flood protection and river training works for urban and rural areas is presented, including the general design principles to be used as guidelines, and illustrated with the case study of river Xerias, Greece. The river Xerias is located in Peloponnese, Greece. It flows from south to north and has a catchment area of 170 km². For the last 1500 m before discharging into the Corinthian gulf, the river flows through the city of Corinthos. This is the reach, which overflowed and flooded the city during the January 1997 flood, causing a lot of damage and human life casualties.     

Clay, Phosphate Adsorption, Dispersion, and Rheology

Soluble phosphate is a common ingredient of fertilizer used in agriculture production all over the world. This chemical mixed with soil is transported into the water and marine environment via rainfall causing a range of environmental problems such as toxic algae bloom. Kaolin clay is a common material found in soil and is used as a model system to understand the effects of phosphate adsorption on the flocculation/dispersion of the clay slurries. In the topics, torrential downpours are common. The large water flow will easily disperse the unflocculated or weakly flocculated sediments over a wide area including river and marine environments. Phosphate adsorption was found to weaken the interparticle forces between clay platelets in the slurries. At high enough concentration, it will completely deflocculate the clay slurries, i.e. the net interparticle force is repulsive. A deflocculated slurry is characterised by a low viscosity and no yield stress. As a result, it is much easier to disperse this slurry over a wide area possible even in a small downpour. This study will present the flow and yield stress behaviour of kaolin clay slurries under the influence of adsorbed phosphate.     

Stabilization of As, Cr, Cu, Pb and Zn in soil using amendments--a review

The spread of contaminants in soil can be hindered by the soil stabilization technique. Contaminant immobilizing amendments decrease trace element leaching and their bioavailability by inducing various sorption processes: adsorption to mineral surfaces, formation of stable complexes with organic ligands, surface precipitation and ion exchange. Precipitation as salts and co-precipitation can also contribute to reducing contaminant mobility. The technique can be used in in situ and ex situ applications to reclaim and re-vegetate industrially devastated areas and mine-spoils, improve soil quality and reduce contaminant mobility by stabilizing agents and a beneficial use of industrial by-products. This study is an overview of data published during the last five years on the immobilization of one metalloid, As, and four heavy metals, Cr, Cu, Pb and Zn, in soils. The most extensively studied amendments for As immobilization are Fe containing materials. The immobilization of As occurs through adsorption on Fe oxides by replacing the surface hydroxyl groups with the As ions, as well as by the formation of amorphous Fe(III) arsenates and/or insoluble secondary oxidation minerals. Cr stabilization mainly deals with Cr reduction from its toxic and mobile hexavalent form Cr(VI) to stable in natural environments Cr(III). The reduction is accelerated in soil by the presence of organic matter and divalent iron. Clays, carbonates, phosphates and Fe oxides were the common amendments tested for Cu immobilization. The suggested mechanisms of Cu retention were precipitation of Cu carbonates and oxy-hydroxides, ion exchange and formation of ternary cation-anion complexes on the surface of Fe and Al oxy-hydroxides. Most of the studies on Pb stabilization were performed using various phosphorus-containing amendments, which reduce the Pb mobility by ionic exchange and precipitation of pyromorphite-type minerals. Zn can be successfully immobilized in soil by phosphorus amendments and clays.     

Outdoor Weathering Evaluation of Carbon-Black-Filled, Biodegradable Copolyester as Substitute for Traditionally Used, Carbon-Black-Filled, Nonbiodegradable, High-Density Polyethylene Mulch Films

Carbon-black-filled, biodegradable, copolyester mulch film (Eastar®, or EA, Tennessee Eastman, Kingsport, TN) and commercial carbon-black-filled, high-density polyethylene (HDPE) mulch film were exposed for 12 weeks to commercial vegetable crop growing conditions by being placed directly on irrigated soil in the field of the University of Tennessee Alcoa Highway State Agriculture Experiment Station (Knoxville, TN) and by being placed on a plywood exposure rack as described by the American Society of Testing and Materials (ASTM) Standard Test Method 1435: Outdoor Weathering of Plastics. Mechanical properties and weather information were collected in order to evaluate the feasibility of using the newly developed biodegradable EA mulch film to replace the nonbiodegradable HDPE mulch film. Results indicate that the EA mulch film exhibited favorable tensile strength and elongation-at-break during outdoor exposure rack testing and outdoor, in-field, placed directly on the soil, exposure testing, suggesting biodegradable EA could be a substitute for the HDPE nonbiodegradable material.     

煤矸石中铅、铬、镉的溶出性能

以滕南煤田某煤矿风化煤矸石为研究对象,应用主成分分析法分析了煤矸石粒径对Pb,Cr,Cd溶出浓度的影响,应用回归分析法分析了浸溶时间与Pb,Cr,Cd溶出浓度的关系特征。实验结果表明：模拟湿地浸溶条件下,煤矸石中Pb,Cd,Cr溶出浓度均超出或接近Ⅲ类水体水质标准,对水环境存在污染风险;煤矸石粒径对Pb,Cd,Cr溶出浓度存在影响,粒径越小则Pb、Cr、Cd溶出浓度越大,粒径小于8.0 cm的煤矸石浸溶贡献较大。建立了表征Pb,Cr,Cd溶出浓度与浸溶时间对数（以10为底）关系的一元三次多项式回归方程,经检验均具有显著性。     

Health risk assessment of heavy metals (Cr, Ni, Cu, Zn, Cd, Pb) in circumjacent soil of a factory for recycling waste electrical and electronic equipment

The aim of the study was to determine the potential environmental contamination in a typical factory for recycling waste electrical and electronic equipment in Shanghai. Heavy metals (Cr, Ni, Cu, Zn, Cd, Pb) in the soil around the factory have been evaluated in this paper. Compared with the background value, the concentrations of six metals detected in all the samples were higher, which showed that toxic metals were released into soil around the factory. Compared with the Environmental Quality Standards for Soils, China grade III, all the six metals are under soil guidelines. The non-cancer risk in different directions from the factory was in the order of: the north > the west > the south > the east. For inhalation and ingestion, the non-cancer risk in the soil west of the factory was biggest. Nevertheless, the non-cancer risk in the soil north of the factory was the biggest for dermal contact. The trend of cancer risk was the west > the south > the north > the east. The non-cancer risk and the carcinogenic risk for Cr, Ni, and Cd were all below the limiting value. This study might provide a reference for the risk assessment involved in electronic waste management and recycling activities.     

Past, present, and future of MSW landfills in Japan

This article focuses on the historical development of landfill technology since the beginning of the nineteenth century in Japan. The regulations and guidelines that form a framework for the technology are reviewed, and the historical background and the current state of Japanese municipal solid waste (MSW) management are described. Through the analysis of data collected from facility leaflets, changes in the leachate treatment system are surveyed. Finally, the concept of the “sustainable bioreactor landfill with low organics” is proposed.     

Bioventing of No. 2 Fuel Oil: Effects of Air Flowrate,Temperature, Nutrient Amendment,and Acclimation

A 14‐month pilot‐scale bioventing study, sponsored by the New Hampshire Department of Environmental Services, was conducted by the University of New Hampshire to determine the effects of the time between the contamination event and the onset of bioventing, as well as air flowrate, temperature, and nutrient amendments. Freshly contaminated soil was not readily amenable to bioventing. Bioventing was effective (82–92.5 percent removal) for acclimated soil amended with nutrients at 10 °C and 20 °C for the 275 cm³/min and 140 cm³/min air flowrates, respectively. First order degradation rates after nutrient addition were ?6.11 ± 0.83 (×10^?3)/day and ?6.57 ± 1.71 (×10^?3)/day, respectively. The results indicate that bioventing will be best applied when the contamination has occurred at least two years before the onset of treatment. © 2014 Wiley Periodicals, Inc.     

Generation, storage, collection and transportation of municipal solid waste--a case study in the city of Kathmandu, capital of Nepal

Solid waste management (SWM) services have consistently failed to keep up with the vast amount of solid waste produced in urban areas. There is not currently an efficient system in place for the management, storage, collection, and transportation of solid waste. Kathmandu City, an important urban center of South Asia, is no exception. In Kathmandu Metropolitan City, solid waste generation is predicted to be 1091 m(3)/d (245 tons/day) and 1155 m(3)/d (260 tons/day) for the years 2005 and 2006, respectively. The majority (89%) of households in Kathmandu Metropolitan City are willing to segregate the organic and non-organic portions of their waste. Overall collection efficiency was 94% in 2003. An increase in waste collection occurred due to private sector involvement, the shutdown of the second transfer station near the airport due to local protest, a lack of funding to maintain trucks/equipment, a huge increase in plastic waste, and the willingness of people to separate their waste into separate bins. Despite a substantial increase in total expenditure, no additional investments were made to the existing development plan to introduce a modern disposal system due to insufficient funding. Due to the lack of a proper lining, raw solid waste from the existing dumping site comes in contact with river water directly, causing severe river contamination and deteriorating the quality of the water.     

Tensile Strength, Elongation, Hardness, and Tensile and Flexural Moduli of PLA Filled with Glycerol-Plasticized DDGS

Rapid growth of the biofuel industry is generating large amounts of coproducts such as distillers dried grains with solubles (DDGS) from ethanol production and glycerol from biodiesel. Currently these coproducts are undervalued, but they have application in the plastics industry as property modifiers. The objective of this research effort is to quantify the effects on mechanical properties of adding DDGS and glycerol to polylactic acid (PLA). The methodology was to physically mix DDGS, as filler, with PLA pellets and injection mold the blends into test bars using glycerol as a plasticizer. The bars were subject to mechanical testing procedures to obtain tensile strength, tensile and flexural moduli, elongation to break, and surface hardness of blends from 0 to 90?%, by weight, of plasticized filler. Blends were typically relatively brittle with little or no yielding prior to fracture, and the addition of glycerol enabled molding of blends with high levels of DDGS but did not increase strength. Any presence of filler decreased the tensile strength of the PLA, and 20?C30?% filler reduced strength by 60?%. The 35?C50?% filled PLA had about one-fifth the value for pure PLA; at 60?C65?% filler level, about 10?% tensile strength remained; and over 80?% filler, 95?% of the strength was lost. Over 20?% filler, the tensile modulus decreased. The 35?% plasticized, filled blend yielded about one-half the stiffness as the pure PLA case; flexural modulus trended in the same manner but demonstrated a greater loss of stiffness. Most blends had less than 3?% elongation to break while surface hardness measurements indicated that up to 60?% filler reduced Shore D hardness by less than 20?%. The tensile strength and modulus data are consistent with the findings of other researchers and indicate that the type of filler and amount and sequence of plasticization are secondary effects, and the total PLA displaced is the dominant factor in determining the mechanical strength of the PLA and DDGS blends. Up to 65?% plasticized DDGS filler can be injection molded, and sufficient mechanical strength exists to create a variety of products. Such a novel material provides higher-value utilization of the biofuel coproducts of glycerol and DDGS and maintains the biodegradable and biocompatible nature of PLA.     

Preparation,sintering behavior,and expansion performance of ceramsite filter media from dewatered sewage sludge,coal fly ash,and river sediment

The main aim of this study is to assess the preparation, sintering behavior, and expansion performance of ceramsite filter media (CFM) from dewatered sewage sludge, coal fly ash, and river sediment without using any natural resources. The results showed that the investigated physical properties of lab made CFM met with the China’s industrial standard of CJ/T 299-2008 and the concentration of heavy metals in the lixivium was lower than the threshold of GB 5085.3-2007. During the sintering process, the relationships between ignition loss rate, expansion rate, and sintering temperature could be well described simultaneously by the 3-order polynomial fitting curve, with high correlation coefficient values (R ² > 0.999). The fitting curves of the ignition loss rate and expansion rate had one peak and one valley, respectively, and their cut-off point that is the sintering temperatures were the same (700 °C). The whole sintering process could be divided into two stages. The ignition loss rate was gradually increased in both the stages. At the same time, the expansion rate was decreased in the first stage and then increased in the second stage. The significance of this work is to pursue the concept of sustainable development.     

Trends in Fish Community Structure,Biomass, and Production in Three Algoma,Ontario, Lakes

Long-term (i.e. >10 years) whole community fish dataincluding catch-per-unit-effort, abundance, biomass, andproduction from three lakes were used: 1) to examine variabilityin fish population and community measures among years using wholelake assessments of fish populations derived from mark recaptureexperiments, 2) to assess implications arising from monitoringindividual species vs. the whole fish community, and 3) toascertain whether, in fisheries assessments (science) a commonlyused surrogate measure, [catch-per-unit-effort (CPUE)] reflectedannual changes in the fish assemblage, and thus may be a goodestimator of abundance. High, long-term variability was evident in the abundance andbiomass of a fish species in our lakes, yet the communityremained relatively stable in terms of its biomass andproduction. Changes in total fish community biomass appear drivenby large species, which, relative to small fish species, remainstable among years. Among years, species richness remainedstable; however, fish species changed in the community. AnnualCPUE was found to be a suitable surrogate for abundance (N) ofsmall fishes; CPUE x mean weight of the catch (bCPUE) was asuitable surrogate for biomass (B) of large fishes. Prior toconcluding that a change in a fish population has occurred as aresult of a stressor, care must be taken to critically examinethe level of population assessment in order to avoid acceptingpotentially invalid conclusions.     

Physical,Mechanical, and Morphological Characteristics of Extruded Starch Acetate Foams

Starch acetates with degrees of substitution (DS) of 0.57, 1.11, 1.68, and 2.23 were prepared and extruded with either water or ethanol. The microstructure, physical properties (radial expansion ratio [RER] and unit density), mechanical properties (spring index [SI] and compressibility), and crystalline structure of the foams were investigated. The functional properties were a function of DS and blowing agent type. When water was used as the blowing agent and DS increased, the foams were pale yellow, with rough and uneven surfaces. The cells were dense, with thick cell walls. Lower RER and SI, with higher DS, were associated with high unit density and compressibility. When ethanol was used as the blowing agent, contrary results were observed. The snow-white foams had smooth surfaces, uniform cells, and smooth cell walls. High RER and SI, and low unit density and compressibility were observed. The changes in SI and compressibility with RER also were examined and found to depend on the type of solvent. A crystalline pattern was observed because of the formation of well-ordered structures during extrusion.     

Recovery of Acidified Lakes: Lessons From Sudbury, Ontario, Canada

Over 7,000 lakes around Sudbury, Ontario, Canada were acidified by S deposition associated with emissions from the Sudbury metal smelters and more distant S sources. Air pollution controls have led to widespread changes in damaged Sudbury lakes, including increased pH and decreased concentrations of SO₄, metals and base cations. While chemical improvements have often been substantial, many lakes are still acidified, although water quality recovery is continuing. Biological recovery has been observed in some lakes among various groups of organisms including fish, zooplankton, phytoplankton and zoobenthos. Generally, however, biological recovery is still at an early stage. Lakes around Sudbury are also showing that the recovery of acid-damaged lakes is closely linked to the effects of other major environmental stressors such as climate change, base cation depletion and UV-B irradiance. Future studies of the recovery of acid-damaged lakes around Sudbury, and in other regions, will need to consider the interactions of these and other stressors.     

Applied geologic,microbiological, and engineering constraints of in-situ BTEX bioremediation

An in-situ bioremediation project has been designed and constructed for a site in south-central Kansas just north of Wichita. A pipeline leaked an unknown quantity of refinedfuels in the 1970s. The spill was undetected until hydrocarbons were found in a nearby municipal water supply well. Of concern, from a regulatory perspective, are the alkylbenzene components found in the groundwater, including benzene, toluene, ethylbenzene, and xylene (BTEX). Initial abatement procedures, including free product removal and pumping, had become ineffective. In-situ bioremediation was selected to complete the restoration process. The project emphasizes the need for a strong understanding of the geologic and hydrogeologic conditions prevalent under the site. Site studies were conducted to determine the distribution and mass of the contaminant and the hydraulic regime. Laboratory microbial studies were used to determine the efficacy of nitrate as a primary electron acceptor. Information from site studies was used to design a treatment system tailored to the requirements of the site. The treatment system is designed to deliver the maximum amount of nutrient-enriched water to the contaminated zone while maintaining hydraulic control of the site.     

Rehabilitation of the chernoistochinskii drinking water system,Nizhnii Tagil,Russia

The U.S. Environmental Protection Agency (EPA) performed a reservoir diagnosis and developed low-cost recommendations to improve drinking water quality for the city of Nizhnii Tagil, Russia. Despite widespread regional pollution, water quality within the drinking water supply source can be summarized as generally good. Sampling and analysis efforts did not reveal appreciable amounts of hazardous chemicals or metals. The major water quality problem stems from an abundance of blue-green algae during the summer months, causing drinking water taste and odor problems and filter clogging at the water treatment plant. City water treatment officials also frequently experience difficulties with maintaining an effective disinfection residual in the distribution system because it spans more than 30 kilometers in length. Regrowth of microorganisms in the distribution system often causes coliform bacteria counts to exceed standards. The implementation of a watershed protection and management program, and the installation of a new disinfection system, to purify drinking water and to reduce bacterial growth in the distribution system should improve drinking water quality for the city residents.