日本变电设备的环境保护技术

介绍了日本变电设备的环境保护技术,包括噪声控制技术、SF6气体控制技术、防止油泄漏技术、回收利用技术等,希望对我国变电设备的运行维护提供借鉴.     

聚丙烯酰-6-氨基吡啶的制备及其对重金属离子的吸附

以2，6-二氨基吡啶为原料，合成了功能单体2-丙烯酰-6-氨基吡啶，并将其与乙二醇二甲基丙烯酸酯共聚合成了聚合物吸附剂聚丙烯酰-6-氨基吡啶。考察了聚合物吸附剂对重金属离子的吸附分离性能。实验结果表明：在混合液中Cu²⁺，Zn²⁺，Cd²⁺，Ni²⁺的初始质量浓度均为10 mg/L、聚合物吸附剂加入量为5 g/L、溶液pH=7、吸附时间为10 min的条件下，聚合物吸附剂对各离子的吸附率均大于90%；采用浓度为0.5 mol/L的HCl溶液对吸附后的聚合物吸附剂进行洗脱，4种重金属离子的洗脱率均可达97%以上；该吸附剂具有很好的稳定性，重复使用11次后其对4种重金属离子的饱和吸附量均未有明显的下降。     

稳定态纳米零价铁-厌氧菌联合处理法降解2,4,6-三氯苯酚

利用SEM、XRD、FTIR等手段对稳定态纳米零价铁（NH₂-SiO₂@NZVI）进行表征，并考察NH₂-SiO₂@NZVI-厌氧菌体系对2，4，6-三氯苯酚（2，4，6-TCP）的降解效果。实验结果表明：NH₂-SiO₂@NZVI具有较强的抗氧化能力及较好的分散性；当2，4，6-TCP质量浓度 50 mg/L、NH₂-SiO₂@NZVI加入量1 g/L、初始 pH 7.00、反应120 h时，2，4，6-TCP的去除率为34.76%，一级降解速率常数为0.022 1，均远大于普通纳米零价铁颗粒；在NH₂-SiO₂@NZVI-厌氧菌体系中，2，4，6-TCP的去除率可达82.70%，NH₂-SiO₂@NZVI与厌氧微生物之间表现出明显的协同效应，能有效缓解2，4，6-TCP对厌氧微生物的抑制作用，稳定体系pH，提高微生物的降解活性和产甲烷活性。     

6,6″-二甲基-4′-苯基-2,2′∶6′,2″-三联吡啶分光光度法测定水中的铁

以 6 ,6″-二甲基 - 4′-苯基 - 2 ,2′∶ 6′,2″-三联吡啶 (TPY )为络合剂 ,用分光光度法测定水中铁的含量。进行了波长、TPY乙醇溶液用量及显色时间等条件的选择。该分析方法表观摩尔吸光系数为 2 .17× 10 5 dm3· mol- 1 · cm- 1 ,变异系数为 3.9% ,加标回收率为 96 .4%～ 10 5 .6 %。[关键词 ]6 ,6″-二甲基 - 4′-苯基 - 2 ,2′∶ 6′,2″-三联吡啶 ;分光光度法 ;铁 ;水质分析以 6 ,6″-二甲基 - 4′-苯基 - 2 ,2′∶ 6′,2″-三联吡啶 (TPY )为络合剂 ,用分光光度法测定水中铁的含量。进行了波长、TPY乙醇溶液用量及显色时间等条件的选择。该分析方法表观摩尔吸光系数为 2 .17× 10 5 dm3· mol- 1 · cm- 1 ,变异系数为 3.9% ,加标回收率为 96 .4%～ 10 5 .6 %。     

PANI/Bi_2MoO_6复合光催化剂的制备、表征及其可见光催化性能

采用原位氧化聚合法制备了PANI/Bi_2MoO_6复合光催化剂,采用XRD、SEM、PL和UV-Vis DRS等技术对其进行了表征,并将其用于罗丹明B(Rh B)的可见光催化降解。表征结果显示:聚苯胺(PANI)包覆于Bi_2MoO_6微球表面,促进了光生载流子的迁移,抑制了光生电子-空穴对的复合,拓宽了催化剂的可见光响应范围。实验结果表明:PANI/Bi_2MoO_6复合光催化剂具有较高的可见光催化活性和良好的稳定性,当w(PANI)为36%、光照90 min时Rh B去除率达90.4%,明显优于纯Bi_2MoO_6;该体系中,空穴和·O2-在污染物的降解过程中起主要作用;PANI和Bi_2MoO_6之间形成了异质结结构,使光生电子-空穴对有效分离。     

污泥处理的新途径—燃料化

本文介绍了污泥燃料化方法的CG流程、HERS流程及SF流程,并对流程的异同点进行了分析。     

g-C_3N_4/C@Bi_2MoO_6复合光催化剂的制备及其光催化活性

通过水热合成法和液相沉积法制备g-C_3N_4/C@Bi_2MoO_6复合光催化剂,并采用X射线衍射、扫描电子显微镜、氮气吸脱附、紫外-可见漫反射等技术对其进行表征。研究了可见光下g-C_3N_4/C@Bi_2MoO_6催化降解罗丹明B(Rh B)的影响因素,并对其光催化反应机理进行初步探讨。实验结果表明:g-C_3N_4掺杂量为60%(w)时g-C_3N_4/C@Bi_2MoO_6的光催化活性最高;在60%g-C_3N_4/C@Bi_2MoO_6的投加量为1.00 g/L、初始Rh B质量浓度为2.50 mg/L、可见光照射150 min的条件下,Rh B的降解率达到97.90%;在g-C_3N_4/C@Bi_2MoO_6光催化降解体系中,h~+和·O_2~-是主要活性物种。     

废铬渣无害化处理工艺方法

该发明公开了一种废铬渣无害化处理工艺。将废铬渣40％～45％、粉煤灰10％～15％、锌窑渣10％～15％、赤泥28％～30％（均为质量分数）混合均匀，破碎至50～80目后送入烧结炉内，于1000～1100℃高温下进行还原烧结物化处理，烧结后的混合料冷却2～3h后用水浸泡20～26h，用滤布滤出渣料，滤液用FeSO4作还原剂，其加入量为废铬渣中Cr^6＋含量的14～16倍，在滤液pH为8～8．5的条件下进行还原反应；将烧结过程产生的废气送至洗涤塔洗涤，产生的水蒸气排空。     

城市绿化垃圾的资源化利用

利用食用菌处理城市绿化草、木的修剪枝叶,实现其资源化利用.主要试验了枝、草配比对出第一潮菇的时间和生物转化率的影响.     

从6-APA和7-ADCA生产废液中回收苯乙酸

采用溶剂萃取、水法提取等方法从6-氨基青霉烷酸和7-氨基-3-去乙酰氧基头孢烷酸生产废液（简称废液）中回收苯乙酸（PAA）,考察了各种因素对回收效果的影响。实验结果表明：以甲苯为萃取剂,在萃取温度30℃、萃取时间15m in、500mL废液中萃取剂加入量130mL的最佳条件下,萃取率为96.5%;在提取温度为65℃左右、结晶温度低于10℃的条件下,PAA收率大于89%,纯度大于99%;所得PAA产品质量好,可用于青霉素G等医药产品的生产。     

Process,Characterization and Biodegradability of Aliphatic Aromatic Polyester/Sisal Fiber Composites

The biodegradability, morphology, and mechanical properties of composite materials made of Poly(butylene adipate-co-terephthalate) (PBAT) and sisal fiber (SF) were evaluated. Composites containing acrylic acid-grafted PBAT (PBAT-g-AA/SF) exhibited noticeably superior mechanical properties due to greater compatibility between the two components. The dispersion of SF in the PBAT-g-AA matrix was highly homogeneous as a result of ester formation between the carboxyl groups of PBAT-g-AA and hydroxyl groups in SF and the consequent creation of branched and cross-linked macromolecules. Each composite was subjected to biodegradation tests in Rhizopus oryzae compost. Morphological observations indicated severe disruption of film structure after 60 days of incubation, and both the PBAT and the PBAT-g-AA/SF composite films were eventually completely degraded. Water resistance of PBAT-g-AA/SF was higher than that of PBAT/SF, although weight loss of composites buried in Rhizopus oryzae compost indicated that both were biodegradable, even at high levels of SF substitution. The PBAT-g-AA/SF films were more biodegradable than those made of PBAT, implying a strong connection between these characteristics and biodegradability.     

Simple technologies for on-farm composting of cattle slurry solid fraction

Composting technologies and control systems have reached an advanced stage of development, but these are too complex and expensive for most agricultural practitioners for treating livestock slurries. The development of simple, but robust and cost-effective techniques for composting animal slurries is therefore required to realise the potential benefits of waste sanitation and soil improvement associated with composted livestock manures. Cattle slurry solid fraction (SF) was collected at the rates of 4m(3)h(-1) and 1m(3)h(-1) and composted in tall (1.7 m) and short (1.2m) static piles, to evaluate the physicochemical characteristics and nutrient dynamics of SF during composting without addition of bulking agent materials, and without turning or water addition. Highest maximum temperatures (62-64 °C) were measured in tall piles compared to short piles (52 °C). However, maximum rates of organic matter (OM) destruction were observed at mesophilic temperature ranges in short piles, compared to tall piles, whereas thermophilic temperatures in tall piles maximised sanitation and enhanced moisture reduction. Final OM losses were within the range of 520-660 g kg(-1) dry solids and the net loss of OM significantly (P<0.001) increased nutrient concentrations during the composting period. An advanced degree of stabilization of the SF was indicated by low final pile temperatures and C/N ratio, low concentrations of NH(4)(+) and increased concentrations of NO(3)(-) in SF composts. The results indicated that minimum intervention composting of SF in static piles over 168 days can produce agronomically effective organic soil amendments containing significant amounts of OM (772-856 g kg(-1)) and plant nutrients. The implications of a minimal intervention management approach to composting SF on compost pathogen reduction are discussed and possible measures to improve sanitation are suggested.     

Evaluation of material recycling for plastics: environmental aspects

“Zero emissions” is a concept envisaging the creation of a sustainable society with minimal disposal of resources. In order to realize zero emissions for plastics, it is important to establish a method for quantitatively evaluating candidate recycling processes. In this study, the principle of the substitution factor (SF) is introduced. A quantitative evaluation of the recycling process for plastics was then carried out. The production process for monofilament plastics was examined. The recycling of plastics discarded during the production process could be substituted in small amounts for virgin materials, giving reduced CO₂ emissions. Furthermore, production using recycled material mixed with virgin material was more effective in reducing CO₂ emissions than when recycled materials only were used. Received: November 19, 1999 / Accepted: November 28, 2000     

钼尾矿制备硅微粉

以钼尾矿为原料,采用酸溶—碳酸钾沉淀法制备硅微粉。考察了反应温度、反应时间、K₂CO₃质量分数对产品中SiO₂质量分数和SiO₂产率的影响。得到的优化工艺条件为：钼尾矿粒径小于74 μm,反应温度50 ℃,反应时间60 min,K₂CO₃质量分数50%。在此工艺条件下,SiO₂产率可达98.92%,产品硅微粉的SiO₂质量分数达98.44%,粒径为100~200 nm,超过中华人民共和国黑色冶金行业标准《不定型耐火材料用二氧化硅微粉》（YB/T 115—2004）中SF96指标（SiO₂质量分数≥96.0%）的要求。     

Changes in the chemical and physicochemical properties of the solid fraction of cattle slurry during composting using different aeration strategies

Replacement of peat as a growing medium by a renewable material, such as an organic waste, is an issue of concern since harvesting of peat has a considerable environmental impact and, actually, it is a non-renewable resource. Cattle manure is a readily available organic waste, which means that once it goes through the composting process, it can be used as an alternative to peat, specifically, the solid fraction obtained from mechanical liquid-solid separation of cattle slurry (SF). Studies have shown it to be suitable for such uses. The purpose of this study was to detect possible changes in the physicochemical and chemical properties of SF when it is composted using different aeration strategies, with an emphasis on the changes that would make it feasible for use as a substrate. With this aim in mind, an experiment was designed with three aeration strategies that would be used during composting. The first consisted of applying air through a static method (forced ventilation). The second involved improving aeration by adding a bulking agent and a dynamic turning method. In the third strategy, aeration was carried out by turning (control). The results show that the different aeration strategies had a clear effect on the evolution of pH, electrical conductivity (EC), nitrate-N, ammonia-N and bicarbonate content. Nitrification was favored under good aeration conditions using the static composting method, probably due to the greater availability of ammonia-N that was transformed into nitrate-N. In general, the low buffering capacity allowed for a reduction of the pH during the curing stage of composting (in conjunction with low temperatures during this period), a characteristic that favors the use of this compost as a growing medium. We also conclude that measuring bicarbonate levels during composting could be used as an indicator of the possible acidification of the material and as a way of evaluating the level of material aeration.     

A pilot plant two-phase anaerobic digestion system for bioenergy recovery from swine wastes and garbage

A pilot plant bioenergy recovery system from swine waste and garbage was constructed. A series of experiments was performed using swine feces (SF); a mixture of swine feces and urine (MSFU); a mixture of swine feces, urine and garbage (MSFUG); garbage and a mixture of urine and garbage (AUG). The system performed well for treating the source materials at a high organic loading rate (OLR) and short hydraulic retention time (HRT). In particular, the biogas production for the MSFUG was the highest, accounting for approximately 865-930Lkg(-1)-VS added at the OLR of 5.0-5.3kg-VSm(-3)day(-1) and the HRT of 9 days. The removal of VS was 67-75%, and that of COD was 73-74%. Therefore, co-digestion is a promising method for the recovery of bioenergy from swine waste and garbage. Furthermore, the results obtained from this study provide fundamental information for scaling up a high-performance anaerobic system in the future.     

Blends of Zein and Nylon-6

Blends of zein and nylon-6 (55?k) in formic acid were used to produce solution cast films and electrospun fibers. When the amount of nylon-6 was 8?% or less blends were formed that had improved tensile strength and reduced solubility. The blends were analyzed using physical property measurements, DSC and IR spectra. Using between 2 and 8?% nylon-6 provided a 33?% increase in tensile strength. Young??s modulus increased by over 50?% in this range. In general elongation was lower for all formulations. Surprisingly the cast films having 0.5?C8?% nylon-6 had improved solvent resistance to 90?% ethanol/water. Electrospun fibers were produced from formic acid solutions of zein and nylon-6 where the amount of nylon was 0, 2 and 6. Fibers produced from 27?% spinning solids had average diameters on the order of 0.5???m. Reducing the spinning solids to 21?% provide slightly smaller fibers however, the fibers had more defects.     

石墨烯量子点/Bi2WO6的制备及其对抗生素的降解性能

采用一步水热法与两步水热法制备了GQDs/Bi₂WO₆（GQDs为石墨烯量子点）复合材料,利用氙灯为光源,考察了暗反应与光反应条件下GQDs/Bi₂WO₆对目标污染物环丙沙星的吸附性能与光催化性能,并对所制备的部分材料进行了表征。实验结果表明,相比于纯Bi₂WO₆,一步法制备的0.20GQDs/Bi₂WO₆（柠檬酸CA与 Bi₂WO₆物质的量比为0.2）和两步法制备的2%GQDs/Bi₂WO₆（GQDs与Bi₂WO₆的质量比为2%）有着相对更好的吸附性能与光催化性能。其中,0.20GQDs/Bi₂WO₆光催化效果最好。暗反应30 min后,环丙沙星吸附去除率为50.4%。光反应60 min后,环丙沙星的光催化去除率为42.6个百分点,总去除率达93.0%。表征结果显示,0.20GQDs/Bi₂WO₆的比表面积最大,且光生空穴和电子复合概率也相对较低。