Study on a novel pneumatic stratified vibration sorting method of waste plastic films

Journal of Material Cycles and Waste Management - Waste plastic films introduce serious pollution and need to be separated and collected for recycling. Aiming at highly efficient sorting of waste...     

Deep learning of grasping detection for a robot used in sorting construction and demolition waste

Journal of Material Cycles and Waste Management - The traditional construction and demolition waste (CDW) treatment process adopts the method of crushing and screening after mixing and combines the...     

Sensor-based sorting of waste digital devices by CNN-based image recognition using composite images created from mass and 2D/3D appearances

Journal of Material Cycles and Waste Management - To improve the recycling process of waste from electrical products, we developed a sensor-based sorting system using convolutional neural network...     

The choice of system boundaries for effective long-term management of phosphorus

Journal of Material Cycles and Waste Management - Material flow analysis (MFA) is a well-established tool for supporting decisions on nutrient management. This paper shows the importance of the...     

Evaluation of methods for sorting CCA-treated wood

Construction and demolition (C&D) wood frequently contains treated wood including wood treated with chromated copper arsenate (CCA). Many recycling options for such wood require that the product be essentially free of preservative chemicals. The objectives of this study were to document the characteristics of the wood waste stream and to evaluate the effectiveness of sorting methods for identifying treated wood. Sorting methods evaluated included visual sorting and visual sorting augmented with the use of PAN indicator stain and/or hand-held X-ray fluorescence (XRF) units. Experiments were conducted on two types of construction and demolition (C&D) wood: source separated loads containing only C&D wood and wood hand-picked from commingled loads of general C&D waste. Results showed that 77% of the treated wood was CCA-treated. For uncontaminated piles (<1% treated wood) of source separated C&D wood, visual sorting was found to effectively remove the small amounts of treated wood present. For piles of source separated wood that were contaminated (approximately 50% treated wood), visual sorts were not accurate and benefited from augmented sorting using PAN indicator stain. The handheld XRF devices were found to be effective for sorting commingled C&D wood, as PAN indicator stain was not as effective due to the excessive amount of surface dirt associated with commingled wood waste. Visual sorting of source separated wood was estimated to cost between US$21 to US$96 per metric ton. These costs depended upon the amount of treated wood and whether or not augmentation with PAN indicator was necessary. Visual sorting augmented with hand-held XRF units was estimated at US$113 per metric ton. The bulk of these costs were associated with labor. Future efforts should focus on reducing labor costs by mounting automated XRF units on conveyor systems.     

Occupational health problems due to garbage sorting

Medical examinations and dust analysis showed that illness of workers, predominently asthma, in an enclosed waste sorting plant in Denmark, was probably related to high particulate levels containing bacteria and endotoxins derived from decaying waste. Modification of the plant to enclose conveyors and install vacuum cleaning systems to reduce dust levels led to significant reductions in airborne bacteria and the nearly complete elimination of endotoxins. However, fungi concentrations were not reduced.     

Plastic waste management: is circular economy really the best solution?

Journal of Material Cycles and Waste Management -     

Announcement

Journal of Material Cycles and Waste Management -     

Correction to: Review on evolution of municipal solid waste management in India: practices,challenges and policy implications

Journal of Material Cycles and Waste Management -     

Correction to: Effect of feed slurry dilution and total solids on specific biogas production by anaerobic digestion in batch and semi-batch reactors

Journal of Material Cycles and Waste Management -     

Assessment of the cementitious and microstructural characteristics of an innovative waste-based eco-cement

Journal of Material Cycles and Waste Management - The cementitious and microstructural characteristics of an innovative waste-based eco-cement consisting of ground granulated blast-furnace slag...     

Morphological study and performance deterioration of sustainable lignocellulosic corn fiber bio-composites

Journal of Material Cycles and Waste Management - Continuous efforts are paid to facilitate finding sustainable ecofriendly functional alternative materials for green products form low-cost...     

Chemical composition determines the bioenergy potential of food waste from pre- and post-production

Journal of Material Cycles and Waste Management - The chemical characterization of the food waste allowed to discriminate between the pre-preparation and post-preparation residues from a...     

Structural characterization and visible light activated photocatalytic ability of glass–ceramics prepared from municipal solid waste

Journal of Material Cycles and Waste Management - The relationship between local structure and visible-light-activated photocatalytic ability of glass–ceramics prepared from Municipal Solid...     

Hydration properties of mixed cement containing ground-granulated blast-furnace slag and expansive admixture

Journal of Material Cycles and Waste Management - The hydration characteristics of mixed cement containing fine powder of blast-furnace slag and expandable material were examined by X-ray...     

Identification of microbial populations contributing to nitrification-associated nitrous oxide emission during cattle manure composting process with forced aeration

Journal of Material Cycles and Waste Management - This study was conducted to clarify the fates of whole nitrogen cycle-associated microorganisms during laboratory-scale composting of cattle manure...     

Recycling of printed circuit boards: ultrasound-assisted comminution and leaching for metals recovery

Journal of Material Cycles and Waste Management - The increase of electronic equipment consumption associated makes the recycling process crucial worldwide. Use of emerging technologies for...     

Material cycle realization by hazardous phosphogypsum waste,ferrous slag,and lime production waste application to produce sustainable construction materials

Journal of Material Cycles and Waste Management - The article presents data from new compositions of construction materials developed from three types of Kazakhstan enterprises’ industrial...     

Recycling of low-silicate iron tailings in the production of lightweight building materials

Journal of Material Cycles and Waste Management - A feasible process for preparing lightweight building materials from the low-silicate iron tailings was developed. Various proportions of...     

Conversion of chicken feather waste via hydrothermal carbonization: process optimization and the effect of hydrochar on seed germination of Acacia auriculiformis

Journal of Material Cycles and Waste Management - Using statistical response surface methodology this paper primarily investigates the role of process parameters at different levels (temperature,...