Life Cycle Assessment of the MBT plant in Ano Liossia, Athens, Greece

The aim of this paper is the application of Life Cycle Assessment to the operation of the MBT facility of Ano Liossia in the region of Attica in Greece. The region of Attica is home to almost half the population of Greece and the management of its waste is a major issue. In order to explicitly analyze the operation of the MBT plant, five scenarios were generated. Actual operation data of the MBT plant for the year 2008 were provided by the region of Attica and the LCA modeling was performed via the SimaPro 5.1 software while impact assessment was performed utilizing the Eco-indicator’99 method.The results of our analysis indicate that even the current operation of the MBT plant is preferable to landfilling. Among the scenarios of MBT operation, the one with complete utilization of the MBT outputs, i.e. compost, RDF, ferrous and non-ferrous metals, is the one that generates the most environmental gains. Our analysis indicates that the exploitation of RDF via incineration is the key factor towards improving the environmental performance of the MBT plant. Our findings provide a quantitative understanding of the MBT plant. Interpretation of results showed that proper operation of the modern waste management systems can lead to substantial reduction of environmental impacts and savings of resources.     

Biodegradable Polymer Composites as Coating Materials for Granular Fertilizers

The composites consisting of poly(vinyl alcohol), horn meal, rapeseed cake, glycerol and phosphogypsum were proposed for the encapsulation of mineral fertilizers. Poly(vinyl alcohol) was used as a binder. The other components making ca. 70% of the mass of the composites were waste materials or by-products. They contain phosphorus, nitrogen, calcium, potassium and sulphur, which are useful nutrients for plants. The effect of the amount of glycerol and of the composition of the mixture of the fillers on the mechanical, sorption properties, water vapour permeability, solubility in water, dimensional stability of the composite films was studied. The addition of phosphogypsum and increase of the concentration of glycerol in the composites lead to the decrease of the tensile strength, water vapour permeability and to the increase of elongation at break and of the solubility of the composite films in water. The composites prepared were used for encapsulation of fertilizers. It was established that encapsulation resulted in the increase of the time of release of the fertilizers. In addition, encapsulation improved mechanical properties of the fertilizers. The fertilizer granules were coated with composite films and tested in the cultivation of tomato sprouts. They showed considerable positive effect on the development of the roots of the plants.     

Seismic analysis for translational failure of landfills with retaining walls

In the seismic impact zone, seismic force can be a major triggering mechanism for translational failures of landfills. The scope of this paper is to develop a three-part wedge method for seismic analysis of translational failures of landfills with retaining walls. The approximate solution of the factor of safety can be calculated. Unlike previous conventional limit equilibrium methods, the new method is capable of revealing the effects of both the solid waste shear strength and the retaining wall on the translational failures of landfills during earthquake. Parameter studies of the developed method show that the factor of safety decreases with the increase of the seismic coefficient, while it increases quickly with the increase of the minimum friction angle beneath waste mass for various horizontal seismic coefficients. Increasing the minimum friction angle beneath the waste mass appears to be more effective than any other parameters for increasing the factor of safety under the considered condition. Thus, selecting liner materials with higher friction angle will considerably reduce the potential for translational failures of landfills during earthquake. The factor of safety gradually increases with the increase of the height of retaining wall for various horizontal seismic coefficients. A higher retaining wall is beneficial to the seismic stability of the landfill. Simply ignoring the retaining wall will lead to serious underestimation of the factor of safety. Besides, the approximate solution of the yield acceleration coefficient of the landfill is also presented based on the calculated method.     

Model of technological alternatives of production of sodium chromate (VI) with the use of chromic wastes

This article presents a mathematical model which describes the sodium chromate (VI) production process with the use of chromic waste as a substitution of natural raw materials. This model is a function of selected process parameters common for all of the examined alternatives and based on equations of material balance. Optimization of the elaborated technological alternatives of the production process with use of recycling of chromic waste has been evaluated by determining the extreme value of the quality indicator WJ. This indicator defines the quantity of waste created in the process. Optimization results enabled the selection of the optimal technological solution from all of the alternatives possible for use in industrial practice. Negative values of the indicator prove that there is the possibility of introducing to the process a larger quantity of waste than the one obtained in the process and transported to the storage heaps.     

Hazardous industrial waste management in Vietnam: current status and future direction

This article concentrates on the existing situation of hazardous industrial waste management in Vietnam. To realize the importance of the development of a Vietnam national strategy based on the reduce, reuse, recycle (3R) concept to the year 2020, the author summarizes the practice of recycling activities of hazardous industrial waste and discusses the challenges arising from increases in the quantity and types of waste and the level of hazard of the waste generated considering that the technical infrastructure for handling and managing the waste is inadequate and the legal system on environmental protection is lacking. In order to improve the existing situation of hazardous industrial waste management, the Vietnamese Government recently has played an increasing role in promoting regional and international cooperation on environmental protection through ratifying the international conventions on the environment including the Basel Convention on the Control of Trans-boundary Movements of Hazardous Waste and their Disposal and the International Labor Organization Convention on Safety in the Use of Chemicals at Work and by adhering to the concept of the material-cycle society. These steps are key opportunities for applying the principles of 3R to the recovery of value from hazardous waste in the future.     

Hydrothermal recycling of waste and performance of the recycled wooden particleboards

Recycling today constitutes the most environmentally friendly method of managing wood waste. A large proportion of the wood waste generated consists of used furniture and other constructed wooden items, which are composed mainly of particleboard, a material which can potentially be reused. In the current research, four different hydrothermal treatments were applied in order to recover wood particles from laboratory particleboards and use them in the production of new (recycled) ones. Quality was evaluated by determining the main properties of the original (control) and the recycled boards. Furthermore, the impact of a second recycling process on the properties of recycled particleboards was studied. With the exception of the modulus of elasticity in static bending, all of the mechanical properties of the recycled boards tested decreased in comparison with the control boards. Furthermore, the recycling process had an adverse effect on their hygroscopic properties and a beneficial effect on the formaldehyde content of the recycled boards. The results indicated that when the 1st and 2nd particleboard recycling processes were compared, it was the 2nd recycling process that caused the strongest deterioration in the quality of the recycled boards. Further research is needed in order to explain the causes of the recycled board quality falloff and also to determine the factors in the recycling process that influence the quality degradation of the recycled boards.     

建筑可持续发展视角下供应链协调与社会责任共担机理研究方案架构

基于建筑全生命周期这个主线,建筑可持续发展视角下供应链协调与社会责任共担机理研究,以绿色建筑供应链运行效率为导向,以既有建筑节能改造效率为切入点,以产业链过程中各主体行为规律为基础,采用“总-分-合”的基本研究思路模式,聚焦了“主导企业驱动下绿色建筑供应链协调机理与策略、既有建筑节能改造主体社会责任共担机理、建筑废弃物再生利用产业链主体社会责任共担机理”等三部分核心内容,初步形成建筑可持续发展视角下供应链协调与社会责任共担机理的理论体系。本成果采用“总-分-合”的思路模式,基于循环经济理念和主体行为策略视角,遵循研究的学理逻辑,以研究生学位论文为基础,开展“主导企业驱动下绿色建筑供应链协调机理与策略、既有建筑节能改造主体社会责任共担机理、建筑废弃物再生利用产业链主体社会责任共担机理”3个子课题研究,从系统整体概况实施全面研究规划着手,构架了总括、绿色建筑供应链协调机理、既有建筑节能改造主体社会责任共担、建筑废弃物再生利用社会责任共担、总结等五大模块及上中下三大篇共12章的系统体系。     

Characterization of municipal solid waste from the main landfills of Havana city

The city of Havana, the political, administrative and cultural centre of Cuba, is also the centre of many of the economic activities of the nation: industries, services, scientific research and tourism. All of these activities contribute to the generation of municipal solid waste (MSW), which also impact other Cuban cities. Inadequate handling of waste and the lack of appropriate and efficient solutions for its final disposal and treatment increase the risk and possibility of contamination. The main difficulty in the development of a system of management of MSW lies in the lack of knowledge of the chemical composition of the waste that is generated in the country as a whole, and especially in Havana, where solid waste management decisions are made. The present study characterizes MSW in Havana city during 2004. The Calle 100, Guanabacoa and Ocho Vías landfills were selected for physical-chemical characterization of MSW, as they are the three biggest landfills in the city. A total of 16 indicators were measured, and weather conditions were recorded. As a result, the necessary information regarding the physical-chemical composition of the MSW became available for the first time in Cuba. The information is essential for making decisions regarding the management of waste and constitutes a valuable contribution to the Study on Integrated Management Plan of MSW in Havana.     

发展绿色电力实施电力工业的可持续发展

从经济、能源结构、环境保护和资源利用等方面提出中国电力工业实施可持续发展的必要性，并提出要发展绿色电力实现电力工业可持续发展。重点对绿色电力进行分析，阐述了国内外绿色电力的发展现状以及中国发展绿色电力遇到的问题以及解决方法，并提出中国要积极发展绿色电力，走电力工业的可持续发展之路。     

Gypsum treated fly ash as a liner for waste disposal facilities

Fly ash has potential application in the construction of base liners for waste containment facilities. While most of the fly ashes improve in the strength with curing, the ranges of permeabilities they attain may often not meet the basic requirement of a liner material. An attempt has been made in the present context to reduce the hydraulic conductivity by adding lime content up to 10% to two selected samples of class F fly ashes. The use of gypsum, which is known to accelerate the unconfined compressive strength by increasing the lime reactivity, has been investigated in further improving the hydraulic conductivity. Hydraulic conductivities of the compacted specimens have been determined in the laboratory using the falling head method. It has been observed that the addition of gypsum reduces the hydraulic conductivity of the lime treated fly ashes. The reduction in the hydraulic conductivity of the samples containing gypsum is significantly more for samples with high amounts of lime contents (as high as 1000 times) than those fly ashes with lower amounts of lime. However there is a relatively more increase in the strengths of the samples with the inclusion of gypsum to the fly ashes at lower lime contents. This is due to the fact that excess lime added to fly ash is not effectively converted into pozzolanic compounds. Even the presence of gypsum is observed not to activate these reactions with excess lime. On the other hand the higher amount of lime in the presence of sulphate is observed to produce more cementitious compounds which block the pores in the fly ash. The consequent reduction in the hydraulic conductivity of fly ash would be beneficial in reducing the leachability of trace elements present in the fly ash when used as a base liner.     

Experimental Processing of Biodegradable Drip Irrigation Systems—Possibilities and Limitations

The increased cost associated with the waste removal and disposal of conventional agricultural plastic in contact with the soil combined with the gradually decreasing cost of the biodegradable plastics allowed the commercialization of biodegradable mulching films. Since the conventional thin wall or tape drip irrigation system lies under the mulching film and is used for one season only, it would be desirable to replace it with a biodegradable one. This paper presents the results of a research work investigating the possibilities and limitations in developing biodegradable drip irrigation thin wall pipes and pipes. The first ever experimental biodegradable drip irrigation thin wall pipes were produced. Rigid pipes were also produced for experimental purposes. Manufacturing problems were encountered in the processing of the biodegradable drippers and irrigation thin wall pipes with the experimental materials due to the complex formulation of the raw materials and the fact that the machinery used was specifically designed for PE processing. Experimental biodegradable thin wall pipes made of Bioflex with embedded drippers made of Mater-Bi were produced. The processing problems encountered with the production of thin wall pipes were surpassed during the experimental production of rigid type irrigation pipes. A biodegradable rigid irrigation pipe made of a grade of Mater-Bi, with embedded cylindrical drippers made of another grade of Mater-Bi was produced successfully. A better understanding of the thermal profile of the biodegradable raw materials and the use of processing equipment adapted to this profile might allow in the future the manufacturing of thin wall drip irrigation pipes for agricultural applications, and the use of alternative biodegradable materials.     

冷冻胶粉粒度对橡胶胶料力学性能的影响

研究了冷冻胶粉粒度对橡胶胶料力学性能的影响,发现添加冷冻胶粉会使胶料的力学性能下降,胶粉粒度越大,胶料性能下降的程度越严重。同时还发现,薄通处理可以改善胶粉的表面活性,减轻胶粉粒度对胶料性能的影响,改善胶料的力学性能。     

Optimizing the collection of used paper from small businesses through GIS techniques: the Leganés case (Madrid, Spain)

This article deals with a methodology for the design of routes for the "bin to bin" (BTB) collection of paper and cardboard waste (PCB) from small businesses, as well as with the new location and calculation of the number of containers needed in the streets for both commercial and non-commercial use due to the large amount of PCB deposited in them. This study was carried out in five shopping areas of the city of Leganés (Community of Madrid, Spain). One of the characteristics of the area is a high density of population and urban traffic. The tool used is the Geographical Information System (GIS-Arc-View). With it we can generate PCB points of high population density in commercial streets based on territorial analysis. We placed the special routes and the new container locations within a distance of 60 m of these collection points (CPT). The system calculates and optimizes six routes according to different urban restrictions. Finally, we provided service to 59% of the shops, which generate almost 82% of the PCB waste, using 160 min per day to collect 1027 kg of high quality PCB. If we compare the system with the system in place previously, we can conclude that the "bin to bin" (BTB) system improves the quality of the PCB in the containers, avoiding overflow and reducing the percentage of rejected material.     

LCA of integrated MSW management systems: case study of the Bologna District

LCA as a decision-supporting tool in planning integrated municipal solid waste management is not, as yet, widely used in Italy. This paper presents a study concerning the application of the LCA methodology to support the development of the new waste management plan for the Bologna District. The main goal of the study was to show decision-makers at the political level the benefits obtainable with the use of LCA, in terms of the identification and quantification of the potential environmental impacts of different waste management strategies. The integrated waste management system of the Bologna District includes waste collection and transport, sorting, recycling, composting, incineration and landfilling. Three scenarios, referring to 2006 and assuming the presence of 950,000 inhabitants and the production of approximately 566,000 t of waste in the district, have been compared. A detailed model has been developed in order to capture effects related to the waste fraction from separated collection and to the different waste treatments. The discussion of the results has focussed in particular on the greenhouse effect and the acidification potential. On the basis of the results obtained, the analysis of an additional scenario characterised by a further increase in separated collection has been put forward.     

Effects of higher-order structure of poly(3-hydroxybutyrate) on its biodegradation. II. Effects of crystal structure on microbial degradation

As one of a series of studies concerning the relationship between the higher-order structure and the biodegradability of a biodegradable plastic, the effects of the crystal structure of the plastic on microbial degradation were investigated. Bacterial poly(d-(–)-3-hydroxybutyrate) (PHB) films which had a wide range of crystallinity were prepared by the melt-quenching method. Results of the microbial degradation indicated that the development of crystallinity evidently depressed the microbial degradability. From scanning electron microscopy (SEM) observations, it is suggested that the microbial degradation proceeded in at least two manners. One was preferential degradation of the amorphous region leaving the crystalline lamellae intact, which was considered to be a homogeneous enzymatic degradation over the surface. The other was nonpreferential spherical degradation on the surface. The SEMs indicate that the spherical holes were the result of colonization by degrading bacteria. The holes varied in size and number with the change of crystal structure. Therefore, it is considered that the crystal structure of PHB also influenced the physiological behavior of the degrading bacteria on the PHB surface.     

微波辐照修复氯丹污染土壤的影响因素

采用微波辐照技术修复氯丹污染土壤,以氯丹的挥发率和分解率为主要评价指标,研究了微波辐照条件对土壤修复效果的影响。实验结果表明:氯丹的挥发率随微波辐照功率的增大而增大,而氯丹的分解率则无明显变化;当活性炭与土壤质量比为9∶120时,氯丹的去除效果最好,去除率达89%;氯丹的挥发性能在前20min内随微波辐照时间的延长而增强,而氯丹的分解性能则刚好相反;当土壤含水率为15%时,氯丹的挥发率最高,为2.5%,而氯丹分解率最小,为16.8%;在酸性偏中性范围内氯丹的去除效果较差,随土壤p H的不断增大,氯丹的挥发率明显升高,且氯丹的分解率也增大。     

Use of life cycle assessment as decision-support tool for water reuse and handling of residues at a Danish industrial laundry.

This analysis presents the results of a life cycle assessment (LCA) carried out on six alternative options for the recycling of water at a Danish industrial laundry for workwear. The study focuses on the handling and disposal of the wet residues generated when wastewater is treated for recycling, and in accounting for long-term potential toxicity impacts. The analysed options are a combination of two water-upgrading technologies: biofilter and ultrafiltration, and three residue disposal alternatives: biogas followed by incineration of sludge at local wastewater treatment plant, thermal vitrification treatment for production of vitrified sand, and mineralization in a sludge bed. It is concluded from the results that with the current Danish environmental policy priorities, the environmental impacts of highest priority are the toxicity effects derived from the presence of heavy metals in the residues. Heavy metals originate from the dirt in the workwear that is washed in the laundry. It is further concluded that the studied water treatment technologies satisfy both the need of clean water for recycling and simultaneously help controlling a safe disposal of pollutants by concentration of the residues. The results of the study also confirm the potential of LCA as a decision-support tool for assisting water recycling initiatives and for residue handling management. The handling of residues has been identified as a stage of the water recycling strategy that bears important environmental impacts. This holistic perspective provided by LCA can be used as input for the definition of environmental management strategies at an industrial laundry, and the prioritization of investments to the environmental profile of laundry processes. In this case-study, the results of the LCA are made operational by, for example, selecting the water treatment technology which is associated wih a safe disposal of the wet residue. It is important to bear in mind that such prioritization depends on national boundary conditions. In the case study analysed, the boundary conditions steer the weighing of the environmental impacts, following the current Danish environmental policy priorities.     

Factors that affect the quality of the bio-waste fraction of selectively collected solid waste in Catalonia

The present study determines the composition of the bio-waste fraction of waste and establishes correlations between the quality of this fraction and socio-economic/demographic variables. According to the Catalan Waste Agency [Agència de Residus de Catalunya (2004). Statistical data. Available from: ], the quantities of glass, paper/cardboard, light packaging and biodegradable material (those components of municipal waste that can be recovered, and have a separate collection) that were selectively collected in 2004 represent 25.6% by weight of the total municipal waste generated. There is a large spread of values from different cities. It is important to bear in mind that this percentage was calculated using the total weights of all of the materials present in the different bins used for selective solid waste collection, without taking account of the fact that many of these bins contain a certain amount of other, undesirable waste. In order to be able to determine the actual quantities that are recovered, it is necessary to establish the quality of the waste collected. To establish the quality of the waste collected, 350 samples were analysed, corresponding to the bins for the bio-waste fraction of solid waste in 193 different cities in Catalonia. Seven levels of quality were established for the study, depending on the amount of undesirable waste present. The results show certain correlations between the socio-economic/demographic factors studied and the percentage of undesirable waste present in the samples. The correlations presented here are not intended to be predictive, but rather indicative of a tendency, which should help us gain a better understanding of the behaviour of the society studied with respect to the separation of solid household waste at origin.     

Fundamental study of the behavior of chlorine during the combustion of single RDF

A fundamental study of the combustion characteristics and the de-HCl behavior of a single refuse-derived fuel (RDF) pellet was carried out to explain the de-HCl phenomena of RDF during fluidized bed combustion and to provide data for the development of high efficiency power generation technology using RDF. In this research, combustion and pyrolysis experiments were carried out in an electrical furnace using a series of model and actual RDF samples. The de-HCl capability of Ca(OH)2 in RDF was evaluated by measuring the emission fraction of HCl in the flue gas and the capture fraction of Cl in the residue. It was found that the capture fraction of Cl components in the residue increased from 0 to nearly 70% when the molar ratio of Ca/Cl was changed from 0 to around 13. Apparently, the capture fraction also decreased with increasing oxygen concentration in the feed gas. The devolatilization process of RDF was confirmed to be a very important part of de-HCl process. The effect of temperature profile of the RDF pellet on the de-HCl process, as it varies with the heating rate of RDF and the oxygen concentration in the vicinity of the sample, is discussed.