共查询到19条相似文献,搜索用时 93 毫秒
1.
农药工业废水是环境严重污染源之一。我国农药品种有百余种,据统计,全国农药厂全年排放高浓度废液约220万吨,废水5000万吨,其中有机磷农药废水2000多万吨。这些农药工业废水具有毒性大,污染物浓度高,生物降解 相似文献
2.
3.
光催化及生物降解法处理有机磷农药废水 总被引:10,自引:0,他引:10
光催化及生物降解法处理有机磷农药废水1前言有机磷农药是70年代发展起来的农药新品种,目前我国各大农药生产厂均把有机磷农药作为基本品种,其产量约占全国农药总产量的80%以上,在生产过程中排放出大量的有毒物质,对环境造成严重的污染,因此对这类农药废水的治... 相似文献
4.
有机磷农药生产废水处理方法的研究与进展 (上) 总被引:3,自引:0,他引:3
本文概括地介绍了近10年来国内有机磷农药废水治理方法研究工作的进展情况。介绍了磷酸酯、硫代磷酸酯与二硫代磷酸酯类农药废水在活性炭吸附、水解、氧化与生物降解中的差异。认为生化法是处理有机磷农药废水的重要方法,废水生化处理的难易,主要取决于有机碳与硫含量的比例,通过预处理除去其中的有机硫,或调整废水中有机碳硫之比例,即可改善难生物降解废水的可生化性。文中简要介绍了吸附、水解与湿式氧化法预处理的效果。 相似文献
5.
有机磷农药废水生化治理现状及进展 总被引:7,自引:3,他引:7
通过对化工部83个农药厂的调查,分析了有机磷农药废水生化治理现状、特点及问题,介绍了国内有机磷农药废水生化处理科研动态及进展情况,并为深入开展有机磷农药废水生化处理工作提出了建议。 相似文献
6.
SBR活性污泥法处理乐果生产废水 总被引:15,自引:1,他引:15
乐果生产废水排放量大、浓度高、毒性强,采用SBR活性污泥法及相应的物理化学处理方法,可使处理后出水的主要指标达到GB8978-88中有机磷农药工业废水排放标准。 相似文献
7.
本文介绍采用气相色谱火焰光度法(GC-FPD)测定农药废水中总有机磷。用苯萃取废水申的有机磷农药,在表温1050—1080℃的石英反应管中通入氢气将有机磷农药还原生成磷化氢(pH_3),然后通过 GC-FPD 检测。试验证明了不同结构的有机磷农药转化率基本一致。本方法操作简便、准确、快速,对于有机磷农药总含量为0.5毫克/升的水祥,测定的相对平均误差为7.0%,相对偏差为8.5%。 相似文献
8.
生物活性炭法处理环链结构有机磷农药废水的研究 总被引:2,自引:0,他引:2
1.前言有机磷农药以其高效低残留在农业生产上得到广泛的应用,但其生产过程中排出的废水量较大,污染物成份复杂、浓度高。据统计,国内有机磷农药废水经治理后合格排放的尚不足7%,特别是环链结构的某些品种的生产废水尚无成熟的处理方法。本文报导了采用生物活性炭技术对水胺硫磷、甲基异柳磷、增效磷等环链结构有机磷农药生产混合废水进行处理的实验结果。 相似文献
9.
关于有机化学污染物与有机化工废水的生物毒性及生物降解性的初步研究(上) 总被引:2,自引:0,他引:2
本文综述了国内外关于有机污染物和有机化工废水的生物毒性与生物降解性方面的某些研究成果和发展趋势,并讨论了测定和评价生物毒性的方法,提出了一些有关生物降解性的看法。 相似文献
10.
有机磷农药光催化分解的可行性研究 总被引:24,自引:1,他引:24
本文研究了不同半导体催化剂存在下。磷酸酯类及硫代磷酸酯类农药的光催化分解规律,1×10~(-4)摩尔/升有机磷农药水溶液在TiO_2存在下,pH为9时,半小时内有机磷完全转化成PO_4~(3-)。另外还研究了电子接受体H_2O_2对光解的影响,及采用太阳光做光源处理有机磷农药废水的可行性。 相似文献
11.
12.
Pham Thi Thuy Steven Van Geluwe Viet-Anh Nguyen Bart Van der Bruggen 《Journal of Material Cycles and Waste Management》2012,14(4):379-387
Pesticides are widely used in modern agriculture to minimize financial losses and maintain food supplies. In southeast Asia, where agriculture is the principal economic activity, pesticides are considered essential, particularly in tropical regions seeking to enter the global economy by providing off-season fresh fruits and vegetables. The absence of a strong legal framework for pesticides facilitated a significant increase in the use of low-quality pesticides. Farmers ignore the risks, safety instructions, and protective directives when using pesticides. They are only concerned about the effectiveness of the pesticides for killing pests, without paying attention to the effects on their health and the environment. The improper usage of pesticides and the incorrect disposal of pesticide wastes contributed to the pollution of groundwater, surface water, and soil, and induced health problems in local communities. This paper describes the impact of the exposure of pesticides on human health and water resources in connection with the usage of pesticides and their management. Because of availability, the data are mainly taken for Northern Vietnam, and applied to the water quality in the delta; nevertheless, the problem relates to all countries in the delta, and similar situations may be found in other regions, particularly in Asia. 相似文献
13.
W. Y. Wan Abdullah B. Y. Aminuddin M. Zulkifli 《Water, Air, & Soil Pollution: Focus》2005,5(1-2):115-123
Cameron Highlands has a long history of intensive horticulture especially vegetable and flower cultivation. This industry
uses large amounts of nutrients and pesticides. Several simulation models were used to assess the movement of pesticides and
nutrients in relation to agronomic practices in farm plots cultivated with cabbage and chrysanthemum. It was shown that most
of the pesticides are absorbed by the topsoils which are enriched by organic fertiliser, and are not leached beyond the top
10 cm layer. Methamidophos, dazomet, cyromazine, triforine and NO3N were predicted to cause soil contamination. The application of high amounts of fertilisers can cause nitrate contamination
to the groundwater in Cameron Highlands. 相似文献
14.
15.
SBR生化法处理有机磷农药废水 总被引:6,自引:0,他引:6
采用SBR生化法处理有机磷农药废水,生产规模试运行结果表明,SBR生化法具有装置结构简单、运转录活、操作方便、COD和有机磷去除率高等特点。 相似文献
16.
在农药和化学品的风险评估工作中,环境动力学模型正得到越来越多的应用。采用Stella软件、Matlab M文件和Matlab Simulink 组件3种建模方式分别构建了微宇宙、湖泊和海湾系统的多介质环境动力学模型,并对3种方式的建模难度、计算耗时及模型直观性进行了比较。研究结果表明:Stella模型最直观,但提供的计算方法有限,更适用于微分方程数量不多且计算周期短的模型;M文件模型建模速度最快,但在直观性和计算速度上没有优势,不建议在环境动力学模型中使用;Simulink模型兼具直观性和计算速度快的优点,无论微分方程数量多少,在需要进行长周期计算的模型中都最具优势。 相似文献
17.
18.