Thermal behaviour of chromium electroplating sludge

Galvanic sludge is classified as a hazardous waste and incineration is one of the techniques used for its treatment. The aim of this work is to study the thermal behavior of a galvanic sludge which contains only chromium as a restriction metal. Simultaneous DTA/TG coupled with mass spectrometer tests were performed to characterize the thermal behavior of the sludge. Besides thermal analysis, sludge samples were heated in a specially designed furnace and these samples were submitted to X-ray diffraction. Vapor from the heated sludge was condensed and the particles were analyzed by EDS microprobe coupled in a scanning electron microscope. The slag formed after the calcination of the galvanic sludge was mainly composed of a mixture of calcium phosphate and fluoride. and minor concentrations of metals. A total weight loss of 34% was observed. The greatest part of this weight loss corresponds to CO2, H2O and SO2. H2O is liberated in the temperature range of 500-1,250 degrees C. CO2 in the range of 500-750 degrees C and SO2 near 1,000 degrees C. Chromium evaporation was not observed in relevant quantities, about 99.6% of the Cr remained incorporated in the slag.     

Uptake of chromium by Aspergillus foetidus

Aspergillus foetidus has the ability to take up chromium during the stationary phase of growth and under growth-nonsupportive conditions. We observed a 97% decrease in hexavalent chromium (initial concentration 5 µg/g) at the end of 92 h of growth, which may be due to its reduction to Cr (III) and/or complexation with organic compounds released due to the metabolic activity of the fungus. Replacement culture studies under growth-nonsupportive conditions revealed that the maximum uptake of Cr (VI) at pH 7.0 is 2 mg/g of dry biomass. At low or high pH values, Cr (VI) uptake is significantly reduced. In addition, the initial rate of total chromium uptake is also enhanced by higher biomass concentrations and the presence of glucose. The results obtained through this investigation indicate the possibility of treating waste effluents containing hexavalent chromium using Aspergillus foetidus.     

用铬渣作水泥矿化剂

介绍了铬渣作水泥矿化剂的原理和生产控制条件,通过经济和环境效益分析证明,铬渣作水泥矿化剂确实是一种处理和利用铬渣的好方法。     

铬渣的无害化处理和综合利用

铬渣产量大、毒性剧烈,是严重污染生态环境和危害人类健康的危险废物.介绍了铬渣各种无害化处理方法的解毒机理、工艺过程和应用实践,阐述了对铬渣进行综合利用的途径,并就铬渣的防治前景提出了建议.     

Leaching behaviour of a chromium smelter waste heap

This paper reports the results of geochemical sampling and modelling of leachates from a chromite ore processing residue (C.O.P.R.) pile under rainwater infiltration. The waste pile is located in the north of England and consists of 800,000 m3 of waste. The pH of fresh leachate is similar to that of a solution in equilibrium with portlandite Ca(OH)2, which is a major constituent of the waste. The in-gassing of CO2(g) causes the pH of the leachates to drop along the drainage ditch and calcite precipitation to occur. The extent of in-gassing is dependent upon the flow rate within the drainage ditch. The dissolution of solid solutions containing residual chromate is likely to control chromate concentrations within the leachate.     

Utilizing agricultural wastes to remove hexavalent chromium from aqueous solutions

The purpose of this study was to determine the hexavalent chromium (Cr^VI) biosorption capacities of several agricultural wastes from aqueous solutions. Samples were tested unaltered and after hydrochloric acid (HCl) treatment. Additional parameters tested include sample dose, contact time, particle size, mixing temperature, and the concentrations and pH of the Cr^VI solutions. Desorption studies were performed to determine if the removed Cr^VI could be recovered. In addition, tests were conducted to determine if the agricultural waste samples (AWS) could be reused for additional Cr^VI biosorption cycles. The results of this study demonstrate a wide range of Cr^VI biosorption proficiencies ranging from 13 to 98 percent removal. The parameters that resulted in higher Cr^VI removal include HCl treatment, higher sample dose, lower Cr^VI solution concentration, and lower mixing temperature. Desorption results showed an 8 to 25 percent Cr^VI recovery rate. Reused AWS were effective at removing Cr^VI during subsequent trials. Therefore, all AWS can be reused for additional Cr^VI biosorption cycles. Hence, these could reduce hazardous waste disposal inefficiencies and costs by avoiding disposing of spent AWS following each Cr^VI biosorption cycle.     

Arsenic,selenium, and chromium speciation in fly ash

Journal of Material Cycles and Waste Management - Arsenic (As), selenium (Se), and chromium (Cr) are harmful to humans at certain concentrations, and can possibly be eluted from coal ash (fly ash)...     

Synthesis of chromium-containing pigments from chromium recovered from leather waste

Cobalt-chromite green and chrome-tin pink pigments have been prepared from chromium extracted from leather shavings produced as a waste product of the leather-tanning industry. The alkaline agent (NaOH, CaO, MgO, NH4OH) used in the extraction process influences the nature of the final product. The effect of the NH4OH:CaO ratio on the final product in the case of cobalt-chromite green was examined. The pigments obtained were characterized by FT-IR and X-ray diffraction (XRD). Colour measurements were compared with those recorded from materials prepared from pure Cr2O3. The leaching of Cr(VI) from the materials was examined by UV spectroscopy.     

铬渣资源化属性及其资源化途径

以山东某铬盐企业生产铬盐产生的铬渣为研究案例，从铬渣化学成分和物相成分的角度出发，结合铬渣各资源化途径的独特要求，探讨铬渣资源化属性与资源化途径的密切关系，拟合出不同性质铬渣的资源化属性，为铬渣找出合理资源化途径提供数据支持，也为其他工业固体废物依据资源属性确定资源化途径最优方式提供借鉴。     

The use of natural processes for the control of chromium migration

Environmental contamination with ionic chromium has been identified as a problem at numerous Superfund and RCRA Corrective Action sites. In many cases, contamination of groundwater to levels above existing standards or criteria may be a potential problem both for direct consumption of groundwater and for transport of mobile forms of chromium to areas such as basements where it can becontacted. In the environment, chromium occurs in two forms: trivalent and hexavalent. The trivalent form is generally immobile and nontoxic; hexavalent chromium is generally mobile and toxic. This article first presents the extent of the chromium problem, reviews the environmental chemistry literature on chromium, and reviews existing treatment technology for chromium immobilization in the nontoxic trivalent state. Finally, we present a case study where immobilization of chromium occurred through natural processes allowing a modified no-action scenario for site remediation.     

铬污染土壤处理中的铬含量及形态变化

采用FeSO_4和Na_2S作为还原剂处理铬污染紫色土壤,研究了还原过程中铬的含量及形态的变化。实验结果表明:当FeSO_4加入量为1.5%(w,下同)时,浸出Cr(Ⅵ)含量由(1 745.13±27.93)mg/kg降至(17.65±2.28)mg/kg,浸出总铬含量由(1 768.83±57.24)mg/kg降至(69.79±8.61)mg/kg,铬形态由水溶+碳酸盐结合态转变到较稳定的铁锰结合态;当Na_2S加入量为0.4%时,浸出Cr(Ⅵ)含量由(1 745.13±27.93)mg/kg降至(25.50±0.12)mg/kg,浸出总铬含量由(1 768.83±57.24)mg/kg降至(410.87±12.83)mg/kg,铬形态由水溶+碳酸盐结合态转变到铁锰结合态和有机结合态。     

Effect of microbial activity on the mobility of chromium in soils

The effect of microbial activity on the chemical state of chromium, in a contaminated soil located in the Rh?ne-Alpes region (France), has been investigated. This soil contained 4,700 mg kg(-1) Cr, with about 40% present in the soluble hexavalent form. Indigenous microbial activity was found to significantly reduce Cr(VI) to the less mobile form (III) when the soil was incubated at 30 degrees C in an aqueous medium containing glucose and nutrients. A Cr(VI)-reducing strain of Streptomyces thermocarboxydus was isolated from the contaminated soil. The strain was found to metabolize Cr(VI) in a similar manner as an exogenous inoculum of Pseudomonas fluorescens LB300, and to precipitate chromium as a Cr oxyhydroxide with a gammaCrOOH-like local structure. The Cr(VI)-reducing activity of S. thermocarboxydus was induced, or significantly accelerated, by the aggregation of bacterial cells or their adhesion to suspended solid particles, and was stimulated in pure culture by glycerol and chromate.     

Treatment of chromium plating process effluents with ion exchange resins.

The surface treatment industry deals with various heavy metals, including the elements Cr, Zn, Ni, Cd, and Cu. Conventional treatments of effluents generate class I solid residue. The aim of this investigation was to study the viability of ion exchange as an alternative process for treatment of rinse water and to determine the efficacy of two ion exchange systems, System 1: "strong" cationic resin-"strong" anionic resin and System 2: "strong" cationic resin-"weak" anionic resin. Commercial resins and solutions taken from rinse tanks of chromium plating companies were used in this investigation. A two-column system, one for the cationic resin and another for the anionic resin, both with 150 ml capacity was mounted. The solution was percolated at a rate of 10 ml/min. The following solutions were used for regeneration of the resins: 2% H2SO4 for the cationic and 4% NaOH for the anionic. The percolated solutions revealed chromium contents of less than 0.25 mg/l, independent of the system used. The "strong" cationic resin-"weak" anionic resin gave excellent regeneration results. The "strong" cationic-"strong" anionic resin presented problems during regeneration, and did not release the retained ions after percolation of 2000 ml of 4% NaOH solution. It is concluded that for this type of treatment, the system composed of "strong" cationic resin and "weak" anionic resin is more appropriate.     

Cr（Ⅵ）对活性污泥系统反硝化过程的影响

采用反硝化反应器,研究了Cr（Ⅵ）对活性污泥系统反硝化过程的影响。在进水Cr（Ⅵ）投加量2.5 mg/L条件下,活性污泥反硝化过程中COD和硝酸盐氮的去除率受到的影响较小,而在10.0 mg/L条件下受到的影响较大,COD和硝酸盐氮的去除率分别从最初的97.1%和99.0%降至70.6%和24.7%。在停止投加Cr（Ⅵ）后的恢复期内,反硝化系统可以逐渐恢复对COD和硝酸盐氮的去除,亚硝酸盐氮仍会有积累,但随着时间的延长可恢复至初始状态。硝酸盐氮还原为亚硝酸盐氮的过程比亚硝酸盐氮的还原过程更易受到Cr（Ⅵ）的影响。     

Study of chromium immobilization behavior in unbound and concrete bound ferrochromium slag

Journal of Material Cycles and Waste Management - Disposal of ferrochromium slag, a major industrial solid waste generated during production of ferrochromium alloy has been a serious problem owing...     

Finished leather waste chromium acid extraction and anaerobic biodegradation of the products

Due to the amounts of chromium in the leachate resulting from leather leaching tests, chromium sulfate tanned leather wastes are very often considered hazardous wastes. To overcome this problem, one option could be recovering the chromium and, consequently, lowering its content in the leather scrap. With this objective, chromium leather scrap was leached with sulfuric acid solutions at low temperature also aiming at maximizing chromium removal with minimum attack of the leather matrix. The effects of leather scrap dimension, sulfuric acid and sodium sulfate concentration in the solutions, as well as extraction time and temperature on chromium recovery were studied, and, additionally, organic matrix degradation was evaluated. The best conditions found for chromium recovery were leather scrap conditioning using 25 mL of concentrated H₂SO₄/L solution at 293 or 313 K during 3 or 6 days. Under such conditions, 30–60 ± 5% of chromium was recovered and as low as 3–6 ± 1% of the leather total organic carbon (TOC) was dissolved. Using such treatment, the leather scrap area and volume are reduced and the residue is a more brittle material showing enhanced anaerobic biodegradability. Although good recovery results were achieved, due to the fact that the amount of chromium in eluate exceeded the threshold value this waste was still hazardous. Thus, it needs to be methodically washed in order to remove all the chromium de-linked from collagen.     

Removal of copper,chromium and arsenic from preservative-treated wood by chemical extraction-fungal bioleaching

Large volumes of preservative-treated wood containing toxic Cr, Cu and As salts are decommissioned worldwide. This study investigated the effectiveness of solid-state fermentation with copper-tolerant brown-rot fungi for the remediation of wood treated with chromated copper arsenate (CCA) and acid copper chromate (ACC) formulations. Treatment of CCA- and ACC-wood with the most effective strain, Antrodia vaillantii FRLP-14G, attained extensive leaching of As and/or Cr, but Cu elimination was poor (<18%). Additional research showed that a variety of organic acids, including citrate, are effective Cu extractants. Based on these findings, a process combining chemical extraction and subsequent fungal treatment was developed that proved highly effective in removing inorganic pollutants from CCA-wood. Extraction of CCA-wood with citric acid (30 mM, pH 3.10) followed by a 28-day solid-state fermentation period removed 87% Cu, 80% Cr, and 100% As. These results indicate the potential of the two-stage process for the remediation of preservative-treated wood.     

Environmental evaluation of different variants of the chromium compound production model using chromic waste

This work presents research results on the evaluation of environmental effects of utilizing chromic waste in chromium compound production processes. The comprehensive evaluation of three chromium compound production models takes into consideration the total cumulated hazard coefficients. The implementation of the new chromium compound production model into industrial practice in 1999 allows the hazard to the natural environment to decrease by 75% in relation to the hazard caused by the old production model used until 1995. The coefficient of the target chromium compound production model was 199%, much higher than 100%. This results from the negative values of the total cumulated hazard coefficients for those cases where the sodium chromate production unit could be a big "consumer" of chromic waste.     

Comparison of three ornamental plants for phytoextraction potential of chromium removal from tannery sludge

Based on pre-experimentation, three ornamental plants, Mirabilis jalapa, Impatiens Balsamin (I. Balsamin) and Tagetes erecta L., were selected as target plants to study the phytoextraction of chromium (Cr) in tannery sludge irrigated with four treatments according to Cr concentration gradient [Control (CK); 20.50 × 10³ mg kg^?1 (T1); 51.25 × 10³ mg kg^?1 (T2); 102.50 × 10³ mg kg^?1 (T3)]. Results of pot experiments showed that the biomass of Mirabilis jalapa and Tagetes erecta L. had no significant differences among the four treatments, while I. Balsamin showed a decline trend in the biomass with the increase of Cr concentration, probably due to some extent to the poisoning effect of Cr under treatment T2 or T3. Mirabilis jalapa accumulated Cr concentration, with 408.97, 124.97, 630.16 and 57.30 mg kg^?1 in its roots, stems, leaves and inflorescence, respectively. The translocation factor and the bioaccumulation coefficient of Mirabilis jalapa are each greater than 1, indicating that Mirabilis jalapa has the strong ability to tolerate and enrich Cr by biological processes. Comparing accumulation properties of the three ornamental plants, in the amount and allocation, Mirabilis jalapa showed the highest phytoextraction efficiency and could grow well at the high Cr concentration. Our experiments suggest that Mirabilis jalapa is the expected flower species for Cr removal from tannery sludge.