煤场防风抑尘网抑尘效果研究

随着国家环保要求越来越高,火电厂煤场扬尘问题受到越来越多的关注。防风抑尘网作为治理煤场扬尘的有效技术,日益得到广泛的应用。论述了煤场起尘机理、起尘风速及起尘量估算、煤场扬尘预测模式,综合研究了防风抑尘网起尘机理及抑尘效果,提出了起尘风速及起尘量估算推荐公式、煤场扬尘预测推荐模式,并通过数值模拟计算与实测数据,对防风抑尘网抑尘效果进行了分析。     

用数值模拟方法研究挡风抑尘网高度对抑尘效率影响

采用数值模拟方法对某电厂露天煤场周围设置挡风抑尘网进行流场模拟,结合起尘量公式,计算了挡风抑尘网在不同高度下的抑尘效率。挡风墙高度分别12m、16m、20m、24m,当风速为4.3m/s时,挡风抑尘网效率分别为67.2%、81.4%、86.6%和88.3%;当风速为20 m/s时,抑尘网效率分别为55.1%、69.8%、74.6%和76.5%。     

舍铁固废千法生产氧化铁红新工艺技术研究

针对冶金企业在生产过程中发生的含铁尘泥,提出了与之相适应的处理新工艺。利用部分种类的尘泥成功制取了符合磁性材料行业要求的氧化铁红,并广泛应用于磁材预烧料企业,从而为含铁尘泥的综合利用提供了新的思路和有效途径。     

半导体激光测尘技术在电厂的应用

对引进美国的ＣＥＭ系统中的激光测尘仪的工作原理、安装调试、系统校准、对比标定、误差分析及运行纵作了全面的介绍，认为激光测尘技术是一项有前途的检测手段。     

含铁炉尘的综合利用方法

该专利公开了一种含铁炉尘的综合利用方法。该发明融合了碱矿渣水泥原理、湿法冶金和液碱浓缩等3项技术，提出了含铁炉尘碱激发综合利用的方法。通过碱液热煮含铁炉尘暨溶剂化处理，激发含铁炉尘的潜在水化胶凝性，同时促进有用金属元素溶人碱液并从中分离。综合利用产品为碱激发溶剂化含铁炉尘悬浮液，主要用作铁精粉造块制粒的胶凝剂；副产品为粗锌或氢氧化锌等。     

黑白显像管玻壳铅尘中铅的提取方法

研究了黑白显像玻壳生产中产生的含铅粉尘的水溶性,酸溶性,浸出毒性和铅的存在形态,提出了用盐酸循环浸铅,冷析ＰｂＣｌ２的提铅方法,考察了浸取剂及浓度,浸取温度,浸取时间对铅浸出率的影响,为充分利用铅资源及实现铅尘无害化提供了依据。     

利用含砷氧化锌尘制备活性氧化锌

用NH3-（NH4）2SO4溶液浸取处理含砷氧化锌尘,可彻底清除砷,制备出合格的活性氧化锌。对于含砷质量分类为1%-2%的原料,产品中所含砷质量分数可降至0.0005%以下。该方法具有除砷彻底,不易产生二次污染的优点,为含砷氧化锌尘的综合利用提供了一种新方法。     

我国烟道测尘技术的现状及发展方向

本文着重介绍国内、外烟道测尘技术的现状及我国今后的发展方向。     

北方燃煤电厂翻车机室粉尘治理

叙述了燃煤发电厂翻车机室冬季卸煤产生粉尘的原因，提出了提高室内温度的对策。安装热空气幕和程控自动门，通过喷雾抑尘减少了翻车时的粉尘污染，改善了工作环境。     

铅蓄电池生产企业的清洁生产审核

介绍了某铅蓄电池生产企业按照清洁生产审核程序的7个阶段开展的清洁生产审核工作,分别对企业含铅废气、含铅废水和含铅危险废物污染源进行了排查,采用铅平衡核算、与清洁生产标准进行指标对比等方法查找问题并进行原因分析,提出改进方案。实施清洁生产方案后企业废水产生量为0.10 m3/(kV.A.h)(以生产单位电功率铅蓄电池产生的废水量计),总铅产生量为0.35 g/(kV.A.h),铅尘处理系统除尘效率达98%以上,年减少含铅废酸液产生量50 t,年减排铅尘3.2 kg,年节约成本50万元以上。     

干法烟气脱硫电除尘器进口喇叭的设计与应用

电除尘器进口喇叭的设计直接影响其气流均布。针对CFB—FGD干法烟气脱硫后的烟气特点，分析了处理脱硫后烟气的电除尘器进口喇叭设计，进行了气流分布试验，为高烟尘电除尘器进口喇叭的设计提供参考。     

Long Range Transport of Asian Dust from Dust Storms and its Impact on Japan

We simulated the long range transport of dust emitted from dust storms that occurred in China by using a global three-dimensional chemical transport model. A modified dust emission flux scheme and a nonlocal diffusion scheme for determining the atmospheric eddy diffusivity in the atmospheric boundary layer were implemented to improve the chemical transport model. We examined the dust transport by comparing the model results with TOMS satellite images. The model calculated monthly total deposition of dust masses were used for comparison with the measurements collected at sampling stations in Japan, and good agreement was found. The model generally reproduced the temporal and spatial variations of dust reasonably well.     

湿式筛板除尘器的设计与应用

利用吸收和溶解的原理,开发设计出湿式筛板除尘器,并应用于化工生产中的除尘。应用结果表明：该设备集气液传质于一体,设计科学合理,结构简单实用,且操作简单,解决了传统填料塔易堵塞、效率低、空塔接触时间短的难题,有效地回收了细粒产品,环境效益和经济效益显著。     

Study of Asian Dust Phenomena in 2001–2003 Using A Network of Continuously Operated Polarization Lidars

We have conducted dust observations at a number of locations including Beijing, Hefei, Suwon, Fukue, Nagasaki, Tsukuba, and Sapporo using automated two-wavelength polarization lidars o study Asian dust phenomena, including generation, transport, and change during transport. We developed a method using the depolarization ratio for estimating the contributions of Asian dust and spherical air-pollution aerosols in observed aerosol mixtures. We analyzed the dust profiles statistically to derive climatological characteristics and year-on-year variations. We also studied dust source and transport path for each dust event using the regional chemical transport model CFORS. The statistical analysis clearly demonstrated the year-on-year variation of dust phenomena and the characteristics depending on the locations of the observational sites. Most major dust events in 2001 and 2002 originated in Inner Mongolia and/or Mongolia at the southern edge of a low-pressure area located in Siberia and were transported by strong westerlies. In 2003, the typical meteorological pattern for heavy dust cases accompanying a strong low in Siberia was not seen, except for one case in April. Furthermore, the lidar observation in Beijing suggests that less dust was generated in the source regions in Inner Mongolia and/or Mongolia, probably due to higher precipitation in 2003.     

Environmental Conditions of Dust Events in Northern China during 2000–2001

To investigate the large-scale environmental conditions of duststorms occurring in Northern China, a synoptic situation of tendust events in Northern China during 2000–2001 was composed andits dynamic features were identified. The composite synoptic situation showed that the occurrence of the ten dust events was associated with the eastward movement of a strong cold high fromMongolia, and the development of a cyclone in Northeast China, which caused the pressure gradient to intensify considerably in Northern China. The upper level circulation revealed that a 500 hPa trough developed rapidly above Northern China, and diagnosis showed that composite ascending motion was pronouncedabove the Siberian district. The change of vertical motion in themiddle and low troposphere above Mongolia was also related to theoccurrence of the ten dust events. When the descendingcurrent, 12 hr before the occurrence, was completely replacedby the ascending current, the instable atmospheric stratificationof the lower troposphere enabled dry dust to be transported from the surface to high altitudes toward Northern China.     

The Characterisation of Settled Dust by Scanning Electron Microscopy and Energy Dispersive X-ray Analysis

Settled dust has been collected inside the main foyers ofthree University buildings in Wolverhampton City Centre,U.K. Two of the three buildings are located in a streetcanyon used almost exclusively by heavy duty dieselvehicles. The dust was collected on adhesive carbonspectro-tabs to be in a form suitable for analysis byscanning electron microscope and energy dispersive X-rayanalysis. Using these analytical techniques, individualparticle analysis was undertaken for morphology andchemistry. Seasonal variations and variations due tolocation were observed in both the morphologicalmeasurements and chemical analysis. Many of the differencesappear attributable to the influence of road traffic, inparticular, the heavy duty diesel vehicles, travellingalong the street canyon.     

Discriminate Analysis for Dust Storm Prediction in the Gobi and Steppe Regions in Mongolia

A discriminate analysis method for probability forecast of dust storms in Mongolia has been developed. The prediction method uses data recorded at 23 meteorological stations in the Gobi and steppe regions of Mongolia, including surface air pressure and geo-potential height at the 500-hPa level on grid points, and weather maps from 1975 to 1990. Weather elements such as air temperature, pressure, geo-potential height etc, which influence the formation of dust storms, are prepared as predictors. To select the most informative/important predictors (variables), we used a mean correlation matrix of variables together with the Mahalonobis distance, and correlation coefficients between dust storms and predictors with an orthogonalization for removing correlated predictors. The most informative predictors for dust storm prediction are intensities of surface cyclones and migratory anticyclones, passage of cold fronts, the horizontal gradients of the surface air pressure in the cold frontal zone, cyclonic circulations from the ground surface up to the 500-hPa level, the geo-potential height at 500-hPa level and its temporal changes. Selected predictors are used in discriminate analysis for formulating dust storm prediction equations. Sandstorm data have been classified into three classes, viz., strong, moderate and weak dust storms, depending on their intensities, durations and areas covered. Predictions of the probabilities of dust storm occurrence use the prediction equations for each class. The prediction is made from 12 hours to 36 hours. Verification of the probability forecasts of dust storms is also shown. The accuracy of forecasts is 72.2–79.9% with the data used for developing equations (dependent variables), in contrast to 67.1–72.0% with unrelated data for deriving equations (independent variables).     

70 kt/a硫磺生产装置除尘系统的设计与研究

概述了硫磺粉尘回收系统的研究现状，简要介绍了一套较为成功的设计方案和几个关键设计环节，指出院 今后推广应用的研究重点和发展趋势，该设计方案突出的特点为：防爆性能好的高效多管式旋风除尘器的设计，对管网和排风罩的优化防爆设计，多层次的防爆抑爆设施的设计。