Solid phase speciation of arsenic by sequential extraction in standard reference materials and industrially contaminated soil samples

Availability, mobility, (phyto)toxicity and potential risk of contaminants is strongly affected by the manner of appearance of elements, the so-called speciation. Operational fractionation methods like sequential extractions have been applied for a long time to determine the solid phase speciation of heavy metals since direct determination of specific chemical compounds can not always be easily achieved. The three-step sequential extraction scheme recommended by the BCR and two extraction schemes based on the phosphorus-like protocol proposed by Manful (1992, Occurrence and Ecochemical Behaviours of Arsenic in a Goldsmelter Impacted Area in Ghana, PhD dissertation, at the RUG) were applied to four standard reference materials (SRM) and to a batch of samples from industrially contaminated sites, heavily contaminated with arsenic and heavy metals. The SRM 2710 (Montana soil) was found to be the most useful reference material for metal (Mn, Cu, Zn, As, Cd and Pb) fractionation using the BCR sequential extraction procedure. Two sequential extraction schemes were developed and compared for arsenic with the aim to establish a better fractionation and recovery rate than the BCR-scheme for this element in the SRM samples. The major part of arsenic was released from the heavily contaminated samples after NaOH-extraction. Inferior extraction variability and recovery in the heavily contaminated samples compared to SRMs could be mainly contributed to subsample heterogeneity.     

Enantiomer fractions of polychlorinated biphenyls in three selected Standard Reference Materials

The enantiomer composition of six chiral polychlorinated biphenyls (PCBs) were measured in three different certified Standard Reference Materials (SRMs) from the US National Institute of Standards and Technology (NIST): SRM 1946 (Lake Superior fish tissue), SRM 1939a (PCB Congeners in Hudson River Sediment), and SRM 2978 (organic contaminants in mussel tissue--Raritan Bay, New Jersey) to aid in quality assurance/quality control methodologies in the study of chiral pollutants in sediments and biota. Enantiomer fractions (EFs) of PCBs 91, 95, 136, 149, 174, and 183 were measured using a suite of chiral columns by gas chromatography/mass spectrometry. Concentrations of target analytes were in agreement with certified values. Target analyte EFs in reference materials were measured precisely (<2% relative standard deviation), indicating the utility of SRM in quality assurance/control methodologies for analyses of chiral compounds in environmental samples. Measured EFs were also in agreement with previously published analyses of similar samples, indicating that similar enantioselective processes were taking place in these environmental matrices.     

Determination and comparison of nitrated-polycyclic aromatic hydrocarbons measured in air and diesel particulate reference materials

The National Institute of Standards and Technology has issued numerous environmental matrix standard reference materials (SRMs) for the measurement of polycyclic aromatic hydrocarbons; however, only one SRM (diesel particulate material) was issued with certified and reference values for four nitrated-polycyclic aromatic hydrocarbons (nitro-PAH). The objective of this study was to develop an improved analytical procedure to quantify 28 mononitro- and dinitro-PAHs, including numerous isomers, in air and diesel particulate SRMs. Two air particulate matrix SRMs, SRM 1649a Urban Dust and SRM 1648 Urban Particulate Matter, and fine particulate matter, collected from Baltimore MD for use as an "interim reference material" for the determination of organic contaminants, have been characterized for nitro-PAHs. Concentrations of nitro-PAHs in all three air particulate materials were at the ng/g level with the highest nitro-PAH concentration being 2-nitrofluoranthene (range between 246 and 340 ng/g). For the three diesel particulate-related SRMs, SRM 1650a Diesel Particulate Matter, SRM 1975 Diesel Particulate Extract, and SRM 2975 Diesel Particulate Matter (Industrial Fortlift), concentrations of nitro-PAHs were in the microg/g range, with 1-nitropyrene as the dominant nitro-PAH (range between 18 and 40 microg/g). Distinct nitro-PAH isomer patterns were present between the air and diesel particulate materials. These results will provide isomer identification and reference concentrations for a large number of nitro-PAHs in the existing diesel and air particulate SRMs. Published by Elsevier Science Ltd.     

Chemical and biological profiles of sediments as indicators of sources of genotoxic contamination in Hamilton Harbour. Part I: analysis of polycyclic aromatic hydrocarbons and thia-arene compounds

Bottom sediment and suspended sediment samples from Hamilton Harbour (western Lake Ontario) and from a major tributary were profiled using polycyclic aromatic hydrocarbons (PAH) and thia-arenes as source apportionment tracers. Ratios of selected PAH and ratios of monomethyl and dimethyl/ethyl dibenzothiophenes to the parent dibenzothiophenes were calculated. Thia-arene and PAH profiles of Standard Reference Material SRM 1649 (urban dust/organics), SRM 1650 (diesel), SRM 1597 (coal tar), Hamilton coal tar and a composite Hamilton air particulate sample provided source sample data. The gas chromatography-mass spectrometry (GC-MS) chromatograms of all sample extracts were dominated by homocyclic PAH but interpretation of PAH profiles with respect to source was difficult. In contrast, thia-arene analyses revealed more distinct differences in profiles of samples collected in different areas of the harbour, including the tributary. These results indicated that areas of coal tar-contaminated sediment are potential contributors to the overall contaminant burden of sediments and suspended sediments in Hamilton Harbour. These data also indicated that contaminants related to mobile combustion sources were entering the harbour via a major tributary.     

Routine analysis of hydrocarbons, PCB and PAH in marine sediments using supercritical CO2 extraction

Automated Supercritical Fluid Extraction (SFE), using CO2, was tested and optimised for routine analysis of hydrocarbons (THC), polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH) in marine sediments. The aim of the exercise was to reduce the amount of solvents used and to reduce the manual handling time for each sample. The sediments contained elemental sulphur, which was removed during the extraction step using activated Cu. Similar recoveries and reproducibility where found for THC when conventional solvent extractions and SFE where compared. Modifying the CO2 with methanol was necessary to obtain extraction recoveries similar to conventional extraction methods for PCB and PAH.     

Arsenic in marine sediments from French Mediterranean ports: Geochemical partitioning,bioavailability and ecotoxicology

This work investigates arsenic mobility, bioavailability and toxicity in marine port sediments using chemical sequential extraction and laboratory toxicity tests. Sediment samples were collected from two different Mediterranean ports, one highly polluted with arsenic and other inorganic and organic pollutants (Estaque port (EST)), and the other one, less polluted, with a low arsenic content (Saint Mandrier port (SM)). Arsenic distribution in the solid phase was studied using a sequential extraction procedure specifically developed for appraising arsenic mobility in sediments. Toxicity assessment was performed on sediment elutriates, solid phases and aqueous arsenic species as single substance using the embryo-toxicity test on oyster larvae (Crassostrea gigas) and the Microtox test with Vibrio fischeri. Toxicity results showed that all sediment samples presented acute and sub-chronic toxic effects on oyster larvae and bacteria, respectively. The Microtox solid phase test allow to discriminate As-contaminated samples from the less contaminated ones, suggesting that toxicity of whole sediment samples is related to arsenic content. Toxicity of dissolved arsenic species as single substance showed that Vibrio fischeri and oyster larvae are most sensitive to As(V) than As(III). The distribution coefficient (Kd) of arsenic in sediment samples was estimated using results obtained in chemical sequential extractions. The Kd value is greater in SM (450 L kg^?1) than in EST (55 L kg^?1), indicating that arsenic availability is higher for the most toxic sediment sample (Estaque port). This study demonstrates that arsenic speciation play an important role on arsenic mobility and its bioavailability in marine port sediments.     

Elevated in-home sediment contaminant concentrations - the consequence of a particle settling-winnowing process from Hurricane Katrina floodwaters

Sediment samples were collected from two homes which were flooded in the wake of Hurricane Katrina in August 2005. The samples were analyzed for trace metals and semi-volatile organic compounds using techniques based on established EPA methods. The data showed higher concentrations of some metals and semi-volatile organic pollutants than reported in previous outdoor sampling events of soils and sediments. The Lake Pontchartrain sediments became resuspended during the hurricane, and this material subsequently was found in the residential areas of New Orleans following levee breaches. The clay and silt particles appear to be selectively deposited inside homes, and sediment contaminant concentrations are usually greatest within this fraction. Re-entry advisories based on outdoor sample concentration results may have under-predicted the exposure levels to homeowners and first responders. All contaminants found in the sediment sampled in this study have their origin in the sediments of Lake Pontchartrain and other localized sources.     

Batch and column studies of the stabilization of toxic heavy metals in dredged marine sediments by hematite after bioremediation

The management of dredged sediments is an important issue in coastal regions where the marine sediments are highly polluted by metals and organic pollutants. In this paper, mineral-based amendments (hematite, zero-valent iron and zeolite) were used to stabilize metallic pollutants (As, Cd, Cu, Mo, Ni, Pb, and Zn) in a contaminated marine sediment sample. Mineral-based amendments were tested at three application rates (5 %, 10 %, and 15 %) in batch experiments in order to select the best amendment to perform column experiments. Batch tests have shown that hematite was the most efficient amendment to stabilize inorganic pollutants (As, Cd, Cu, Mo, Ni, Pb, and Zn) in the studied sediment. Based on batch tests, hematite was used at one application rate equal to 5 % to conduct column experiments. Column tests confirmed that hematite was able to decrease metal concentrations in leachates from stabilized sediment. The stabilization rates were particularly high for Cd (67 %), Mo (80 %), and Pb (90 %). The Microtox solid phase test showed that hematite could decrease significantly the toxicity of stabilized sediment. Based on batch and column experiments, it emerged that hematite could be a suitable adsorbent to stabilize metals in dredged marine sediment.     

Modification of chemical oxygen demand monitoring in the Yellow River, China, with a high content of sediments.

This paper presents a modification of chemical oxygen demand (COD) monitoring giving a better indication of the pollution level compared with the conventional COD method for rivers with a high content of sediments. The correlation between the sediment organic carbon and COD was investigated using sediments sampled in the middle Yellow River, China. Partitioning of the sediment organic carbon between the water and sediment phases was also investigated using batch experiments, with the sediment concentration varying from 20 to 400 g/L. As a result, the COD modification equations are proposed for both turbid water (mixture of water and sediment) and supematant water (filtrate using a 0.45-microm membrane). The modified COD in turbid water and supernatant water could be 40 and 10% less than the monitored COD values, respectively. These results may have a significant influence on the assessment of water quality class in the Yellow River.     

Determination of levoglucosan and its isomers in size fractions of aerosol standard reference materials

The present study tested the extraction efficiency and quantification reproducibility of anhydrosugars in a series of NIST SRMs using two extraction protocols and isotopically-labeled (d₇-levoglucosan) vs. chemically analogous (sedoheptulosan) surrogates. In both instances, levoglucosan concentrations in the different versions of the Washington, D.C. urban dust standard (SRM 1649, 1649a, 1649b, and RM 8785) were similar. The present test also showed that levoglucosan concentrations were not affected by long-term shelf storage of dry material. Variability of analyses were similar for both surrogates and averaged <5%. Surrogate recoveries were shown to average 103 ± 7% and 97 ± 7% for d₇-levoglucosan and sedoheptulosan, respectively. The choice of solvent was shown to affect recoveries the most (but not variability). Levoglucosan concentrations were either seriously underestimated or overestimated with ethyl acetate extraction when d₇-levoglucosan or sedoheptulosan was used as surrogate, respectively. These results point to the need to use some fraction of polar solvent (i.e. methanol) in the solvent mixture. Anhydrosugar concentrations in the urban dust from the Czech Republic (candidate SRMs 2786 and 2787) were characterized by 3- to 7-fold higher anhydrosugar concentrations than those observed in the Washington, D.C. urban dust. The internal anhydrosugar signatures (i.e. levoglucosan/mannosan ratio: L/M) confirm the predominance of biomass combustion sources in both SRM series with mixed inputs from hardwood and softwood combustion in the Washington, D.C. urban dust and a predominantly softwood source in the Prague urban dust. The uniform distribution of anhydrosugars, across the particle size distribution of both SRM series, confirms earlier studies that low temperature charred materials contribute significant inputs to atmospheric ultrafine particles with long atmospheric residence time and transport ranges.     

Characterization of organic matter in pristine and contaminated coastal marine sediments using solid-state 13C NMR, pyrolytic and thermochemolytic methods: a case study in the San Diego harbor area.

Chemical composition of coastal marine sedimentary organic matter (SDOM) is a function of natural and anthropogenic inputs to the system. In this study a combination of analytical techniques: 13C nuclear magnetic resonance (NMR), pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and tetramethylammonium hydroxide thermochemolysis-gas chromatography/mass spectrometry (TMAH thermochemolysis-GC/MS) were used to study the contribution of hydrophobic organic contaminants and terrestrial OM to the SDOM. Sediments were collected from two sites in the San Diego Bay: Paleta Creek, which is contaminated, and Coronado Cayes, which is relatively pristine. Concentrations of polycyclic aromatic hydrocarbons (PAHs) at both sites, as determined by ultrasonically assisted lipid extraction are found to be higher in the surface layer, to generally decrease with depth, and to be present at about two orders of magnitude higher concentration at the contaminated site as compared to the pristine site. The sediment samples were partially deashed with HF/HCI treatment before further analysis. 13C-NMR spectra of the Paleta Creek samples show a higher aromatic carbon content and a distinct phenolic carbon peak. This suggests a large input from terrestrial carbon (lignin). Data from both Py-GC/MS and TMAH thermochemolysis-GC/MS support this and indicate the presence of lignin-derived residues, primarily of the guaiacyl type at the contaminated site. In contrast, SDOM at the Coronado Cayes site exhibits less terrestrial input. In general, the SDOM resembles soil OM rather than typical marine SDOM. Chemical analyses of the lipid-extracted, partially deashed sediments, does not reveal the presence of any PAHs.     

Application of surrogate methods for assessing the bioavailability of PAHs in sediments to a sediment ingesting bivalve

The usefulness of two surrogate methods for rapidly determining the bioavailability of PAHs in hydrocarbon-contaminated marine sediments was assessed. Comparisons are made between the PAHs accumulated by the benthic bivalve, Tellina deltoidalis, and the extractable-PAHs determined using a 6-h XAD-2 resin desorption method and a 4-h gut fluid mimic (GFM) extraction method. There were significant positive relationships between PAH bioaccumulation by the bivalves and sediment PAH concentrations. These relationships were not improved by normalising the sediment PAH concentrations to the organic carbon concentration. The average percentage lipid content of the bivalves was 1.47 ± 0.22% and BSAFs for total-PAHs ranged from 0.06 to 0.80 (kg OC/kg lipid). The XAD-2 and GFM methods both extracted varying amounts of PAHs from the sediments. Low concentrations of PAHs were extracted by the GFM method (0.2–3.6% of total-PAHs in sediments) and the GFM results were inadequate for generalising about the bioavailability of the PAHs in the sediments. The XAD-2 method extracted greater amounts of PAHs (3–34% of total-PAHs in sediments), however, the total-PAH concentrations in the sediments provided a better, or equally good, prediction of PAH bioaccumulation by T. deltoidalis. The results indicated that these methods required further development before they can be applied routinely as surrogate methods for assessing the bioavailability of PAHs in sediments. Future research should be directed towards lowering detection limits and obtaining comparative data for a greater range of sediment types, contaminant classes and concentrations, and organisms of different feeding guilds and with different gut chemistry.     

Optimization of analytical methods to improve detection of erythromycin from water and sediment

Analytical methods to improve the detection of erythromycin in water and sediment were developed to optimize for erythromycin's recovery of extractable and bound residues from the aquatic environment. The objective of this study was to determine optimal recovery of erythromycin from water and sediment to improve its detection in environmental samples through solid-phase extraction (SPE) and sediment-extraction methods. SPE methods examined included previously reported methods for macrolide and sulfonamide antibiotics with erythromycin recoveries ranging from 75.5 % to 94.7 %. Extraction of erythromycin was performed from sand employing various solvents and buffers to determine the best method for extraction from two sandy loam pond sediments. Various extraction times were also examined, and all extraction procedures were performed in duplicate. The greatest recovery of (14)C-erythromycin in the Iowa sediment was 84 % using 0.3 M ammonium acetate at pH 4.2: acetonitrile (15:85, v/v) solution. The Oklahoma sediment yielded the greatest recovery of (14)C-erythromycin at 86.7 % with 0.3 M ammonium acetate at pH 7: acetonitrile (30:70, v/v) with a 60-minute shake time. The present results demonstrate improved extraction methods for enhancing the accuracy of erythromycin detection from environmental samples.     

Optimization of analytical methods to improve detection of erythromycin from water and sediment

Analytical methods to improve the detection of erythromycin in water and sediment were developed to optimize for erythromycin's recovery of extractable and bound residues from the aquatic environment. The objective of this study was to determine optimal recovery of erythromycin from water and sediment to improve its detection in environmental samples through solid-phase extraction (SPE) and sediment-extraction methods. SPE methods examined included previously reported methods for macrolide and sulfonamide antibiotics with erythromycin recoveries ranging from 75.5 % to 94.7 %. Extraction of erythromycin was performed from sand employing various solvents and buffers to determine the best method for extraction from two sandy loam pond sediments. Various extraction times were also examined, and all extraction procedures were performed in duplicate. The greatest recovery of ¹⁴C-erythromycin in the Iowa sediment was 84 % using 0.3 M ammonium acetate at pH 4.2: acetonitrile (15:85, v/v) solution. The Oklahoma sediment yielded the greatest recovery of ¹⁴C-erythromycin at 86.7 % with 0.3 M ammonium acetate at pH 7: acetonitrile (30:70, v/v) with a 60-minute shake time. The present results demonstrate improved extraction methods for enhancing the accuracy of erythromycin detection from environmental samples.     

Is Arenicola marina a suitable test organism to evaluate the bioaccumulation potential of Hg, PAHs and PCBs from dredged sediments?

This paper presents the results of investigations on the suitability of lugworms (Arenicola marina) to study the bioaccumulation potential of Hg, PCB and PAH compounds from dredged sediments upon laboratory exposure. The results of tissue concentrations for several sediments from Spanish ports showed that it is possible to identify increased levels of contaminants in lugworms just after 10 days of exposure although different bioaccumulation trends were shown amongst compounds and sediments. Total and organic Hg compounds were accumulated following a non-linear trend, with a sharp increase of tissue concentrations in lugworms exposed to levels of contamination associated to a significant increase in mortality. Interestingly organic Hg compounds accounted for an average of 40% of the total Hg in lugworms exposed to sediments presenting sublethal concentrations while, when exposed to sediments presenting lethal concentrations, organic Hg compounds only accounted for 4% of the total Hg accumulated in lugworms. While lugworms seem to readily accumulate Hg and PCB compounds, with some variability explained by the organic matter content in sediments or other factor for which it accounts for, the results for PAHs suggest a more complex process of bioaccumulation as no relationship was observed between the measured concentrations in sediments and in lugworms, not even after correcting the results for this factor. Besides, the differences in the calculated BSAFs for each compound and for each sediment supported the use of bioassays for evaluating the bioaccumulation potential of sediment-bound contaminants as part of the assessment framework required in pre-dredging investigations, as they still offer unique information about the bioavailability of sediment-bound contaminants.     

Toxicity and heavy metal contamination of surficial sediments from the Bay of Thessaloniki (Northwestern Aegean Sea) Greece

Surficial sediments (the fraction < 2000 microm) from the Bay of Thessaloniki, in the Northwestern Aegean Sea, Greece were examined for heavy metal and organic carbon contents, as well as for acute LUMIStox toxicity of pore waters (PWs), wet sediment elutriates (WSEs) and dry sediment elutriates (DSEs) obtained from the solid material remaining after PW extraction. WSEs where not toxic. EC20/50 values could be measured in some DSE and PW samples. In all sediment samples, the DSE toxicity was greater than the corresponding PW toxicity. Sediment concentrations of total and labile Cd, Pb, Cu, Cr, Zn, Mn, Ni and Fe were determined and evaluated in relation to sediment quality guidelines. Pollution levels ranged from low to high for certain metals. A misfit between sediment toxicities calculated from heavy metal concentrations and those biologically measured was observed. Toxicity values were in general poorly correlated with sediment's heavy metal or organic carbon content. As significant correlation was however found between the DSE toxicity with total Ni and labile Fe, as well as for the PW toxicity with total Ni, labile Fe and labile Cr.     

Sulfamethoxazole sorption by sediment fractions in comparison to pyrene and bisphenol A

The environmental behavior of antibiotics has attracted great research attention. However, their sorption mechanisms in soils/sediments are still unknown. Comparison of the sorption properties between the widely-studied hydrophobic organic contaminants (HOCs) and antibiotics may provide valuable insight to antibiotic sorption mechanisms. Thus, in this study batch experiments for pyrene (PYR), bisphenol A (BPA), and sulfamethoxazole (SMX) sorption were conducted on a sediment sample and its separated fractions. Our results showed the high sorption of PYR on black carbon and organic matter. Although high sorption of SMX was observed for both separated organic fractions (humic acids) and inorganic mineral particles, the original sediment particles showed relatively low sorption. Competitive sorption between SMX and dissolved humic acid on mineral particles was observed in this study. This competitive interaction is a unique process for antibiotic sorption in soils/sediments compared with apolar HOCs and may be one of the important factors controlling the antibiotic sorption.     

Effect of sediment properties on the sorption of C12-2-LAS in marine and estuarine sediments

Linear alkylbenzene sulfonates (LAS) are anionic high production volume surfactants used in the manufacture of cleaning products. Here, we have studied the effect of the characteristics of marine and estuarine sediments on the sorption of LAS. Sorption experiments were performed with single sediment materials (pure clays and sea sand), with sediments treated to reduce their organic carbon content, and with field marine and estuarine sediments. C₁₂-2-LAS was used as a model compound. Sorption to the clays montmorillonite and kaolinite resulted in non-linear isotherms very similar for both clays. When reducing the organic content, sorption coefficients decreased proportionally to the fraction removed in fine grain sediments but this was not the case for the sandy sediment. The correlation of the sediment characteristics with the sorption coefficients at different surfactant concentrations showed that at concentrations below 10 μg C₁₂-2-LAS/L, the clay content correlated better with sorption, while the organic fraction became more significant at higher concentrations.     

Release of pentachlorophenol from black carbon-inclusive sediments under different environmental conditions

To investigate the feasibility of using black carbon (BC) in the control of hydrophobic organic contaminants (HOCs) in sediment, we added BCs from various sources (rice straw charcoal (RC), fly ash (FC) and soot (SC)) to sediment to create different BC-inclusive sediments and studied the release of pentachlorophenol (PCP) in the sediments under different condition. Different pH values had no obvious effect on the release of PCP in BC-inclusive sediment, but solid/liquid ratio, temperature, salinity and dissolved organic matter (DOM) content had significant influences on the release of PCP in all sediments except the RC-inclusive sediment. Adding 2% RC to sediment resulted in a 90% decrease in PCP release, which was a greater decrease than observed with FC- and SC-inclusive sediments. Therefore, from the standpoint of HOC release, the application of RC is feasible for organic pollution control in the water environment.     

Distribution of polycyclic aromatic hydrocarbons in water and surface sediments from Daya Bay,China

Marine culture is thriving in China and represents a major component of the regional economy in coastal zones, yet the environmental quality of many of those areas has never been studied. This paper attempts to investigate the quality status of Daya Bay, a key aquaculture area in China. The levels of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in water and sediment samples of the bay. The total concentrations of 16 PAHs varied from 4228 to 29325 ng l(-1) in water, and from 115 to 1134 ng g(-1) dry weight in sediments. In comparison to many other marine systems studied, the PAH levels in Daya Bay waters were relatively high, and at six sites they were sufficiently high (> 10 microg l (-1)) to cause acute toxicity. The PAH composition pattern in sediments suggest dominance by medium to high molecular weight compounds, and the ratio of certain related PAHs indicate important pyrolytic and petrogenic sources. Further analysis showed that the distribution coefficient (KD) increased with the particular organic carbon content of sediments, consistent with the PAH partition theory. The organic carbon normalised distribution coefficient (K(oc)) also increased with the compounds' octanol/water partition coefficient (K(ow)), confirming the potential applicability of the linear free energy relationships in the modelling and prediction of PAH behaviour in marine environments.