Investigation of heavy metal accumulation in Polygonum thunbergii for phytoextraction

In this study, cadmium (II), lead (II), copper (II) and zinc (II) were determined in Polygonum thunbergii and soil from the Mankyung River watershed, Korea. Soil samples contained detectable lead (<17.5 g g(-1)), copper (<8.4 g g(-1)) and zinc (<24.5 g g(-1)), whereas cadmium was undetectable. Whole plants of P. thunbergii contained detectable lead (<320.8 g g(-1)), copper (<863.2 g g(-1)) and zinc (<2427.3 g g(-1)), whereas cadmium was detectable only in the stem (<7.4 g g(-1)) and root (<10.1 g g(-1)). Whole plant concentrations were very different for each metal, particularly in the case of zinc. The mean content of heavy metal in the whole plants increased in the order of cadmium (8.5 g g(-1))相似文献   

Effect of mixed cadmium,copper, nickel and zinc at different pHs upon alfalfa growth and heavy metal uptake

Alfalfa plants were grown in soil-pots contaminated with a mixture of Cd(II), Cu(II), Ni(II), and Zn(II), (at 50 mg/kg each) at pHs of 4.5, 5.8, and 7.1. The plants were fertilized using a nutrient solution, which was adjusted appropriately to the same pH. Plants in the control treatment were grown in the absence of the heavy metals mixture. The growth of the control plants was the same at the three pHs studied and the heavy metal stressed plants also showed similar behavior at each pHs. There were statistically significant differences (P<0.05) between the shoot length of the control treatment plants and the length of plants grown in the presence of the heavy metal mixture. Under the effects of the heavy metal mixture, nickel was the most accumulated element in the shoot tissue, with 437, 333, and 308 ppm at pH 7.1, 5.8, and 4.5, respectively. Cadmium was found to be second in accumulated concentrations with 202 ppm, 124 ppm, and 132 ppm at pH 7.1, 5.8, and 4.5, respectively, while zinc was third, followed by copper. The maximum relative uptakes (element in plant/element in soil-water-solution) were found to be 26 times for nickel, 23 times for cadmium, 12 times for zinc. and 6 times for copper. We considered these relations as indicative of the ability of alfalfa plants to take up elements from a soil matrix contaminated with a mixture of cadmium, copper, nickel, and zinc.     

Effects of pH on the toxicity of cadmium, copper, lead and zinc to Folsomia candida Willem, 1902 (Collembola) in a standard laboratory test system

EC₅₀s for cadmium, copper, lead and zinc were determined for juvenile production of Folsomia candida at pH6.0, 5.0 and 4.5 in a standard laboratory test system. In contrast to most previous studies where metal toxicity was increased at low pHs, in our experiments there was no clear relationship between soil acidity and EC_{50-reproduction} in this species. The EC_{50-reproduction} values (μg g⁻¹) for cadmium and zinc were similar at all three pHs (pH6.0: Cd 590, Zn 900; pH5.0: Cd 780, Zn 600; pH4.5: Cd 480, Zn 590). In contaminated field sites adjacent to primary zinc smelters, zinc is invariably present in soils at concentrations of at least 50 times that of cadmium Thus deleterious effects of mixtures of these metals on populations of Collembola in such sites can be attributed to zinc rather than cadmium.     

Efficiency of lipopeptide biosurfactants in removal of petroleum hydrocarbons and heavy metals from contaminated soil

This study describes the potential application of lipopeptide biosurfactants in removal of petroleum hydrocarbons and heavy metals from the soil samples collected from industrial dumping site. High concentrations of heavy metals (like iron, lead, nickel, cadmium, copper, cobalt and zinc) and petroleum hydrocarbons were present in the contaminated soil samples. Lipopeptide biosurfactant, consisting of surfactin and fengycin was obtained from Bacillus subtilis A21. Soil washing with biosurfactant solution removed significant amount of petroleum hydrocarbon (64.5 %) and metals namely cadmium (44.2 %), cobalt (35.4 %), lead (40.3 %), nickel (32.2 %), copper (26.2 %) and zinc (32.07 %). Parameters like surfactant concentration, temperature, agitation condition and pH of the washing solution influenced the pollutant removing ability of biosurfactant mixture. Biosurfactant exhibited substantial hydrocarbon solubility above its critical micelle concentration. During washing, 50 % of biosurfactant was sorbed to the soil particles decreasing effective concentration during washing process. Biosurfactant washed soil exhibited 100 % mustard seed germination contradictory to water washed soil where no germination was observed. The results indicate that the soil washing with mixture of lipopeptide biosurfactants at concentrations above its critical micelle concentration can be an efficient and environment friendly approach for removing pollutants (petroleum hydrocarbon and heavy metals) from contaminated soil.     

Mitigation effects of silicon rich amendments on heavy metal accumulation in rice (Oryza sativa L.) planted on multi-metal contaminated acidic soil

The mechanisms of stabilization by silicon-rich amendments of cadmium, zinc, copper and lead in a multi-metal contaminated acidic soil and the mitigation of metal accumulation in rice were investigated in this study. The results from a pot experiment indicated that the application of fly ash (20 and 40 g kg⁻¹) and steel slag (3 and 6 g kg⁻¹) increased soil pH from 4.0 to 5.0-6.4, decreased the phytoavailability of heavy metals by at least 60%, and further suppressed metal uptake by rice. Diffusion gradient in thin-film measurement showed the heavy metal diffusion fluxes from soil to solution decreased by greater than 84% after remediation. X-ray diffraction analysis indicated the mobile metals were mainly deposited as their silicates, phosphates and hydroxides in amended treatments. Moreover, it was found metal translocation from stem to leaf was dramatically restrained by adding amendments, which might be due to the increase of silicon concentration and co-precipitation with heavy metals in stem. Finally, a field experiment showed the trace element concentrations in polished rice treated with amendments complied with the food safety standards of China. These results demonstrated fly ash and steel slag could be effective in mitigating heavy metal accumulation in rice grown on multi-metal contaminated acidic soils.     

Palygorskite as a feasible amendment to stabilize heavy metal polluted soils

The sorption behaviour of palygorskite has been studied with respect to lead, copper, zinc and cadmium in order to consider its application to remediate soils polluted with these metals. The Langmuir model was found to describe well the sorption processes offering maximum sorption values of 37.2 mg/g for lead, 17.4 mg/g for copper, 7.11 mg/g for zinc and 5.83 mg/g for cadmium at pH 5-6. In addition the effect of palygorskite amendment in a highly polluted mining soil has been studied by means batch extractions and leaching column studies. The soluble metal concentrations as well as the readily-extractable metal concentrations were substantially decreased at any concentration of palygorskite applied to soil (1, 2, 4%), although the highest decrease is obtained at the 4% dose. The column studies also showed a high reduction in the metal leaching (50% for lead, 59% for copper, 52% for zinc and 66% for cadmium) when a palygorskite dose of 4% was applied.     

Heavy metal speciation and mobility assessment of arid soils in the vicinity of Al Ain landfill, United Arab Emirates

Sixty-four surface soil samples taken in the vicinity of Al Ain landfill were analysed for cadmium, chromium, copper, nickel, lead and zinc by inductively coupled plasma spectroscopy. Extraction techniques were used to establish the association of the total concentrations of the six metals in the soil samples with their contents in the exchangeable, carbonate, iron/manganese oxides, and residual fractions. In the investigated soils, the recorded concentrations were as follows: 0.043 mg kg^-1 for cadmium, 19.1 mg kg^-1 for chromium, 53.3 mg kg^-1 for copper, 60 mg kg^-1 for nickel, 13.7 mg kg^-1 for lead, and 117 mg kg^-1 for zinc. Cadmium, chromium, nickel, lead and zinc concentrations in the investigated soil samples reflect the natural background values in shale, whereas copper is slightly enriched. I-geo (geoaccumulation index) values of the metals in the soils under study indicate that they are uncontaminated with cadmium, chromium, nickel, lead and zinc, but contaminated to moderately contaminated with copper. Heavy metal contents in the sediments were found to be significantly influenced by different physico-chemical parameters. The effect of these parameters can be arranged in the following order: clay fraction > carbonate fraction > silt fraction > organic matter fractions. A sequential extraction procedure showed that the total concentrations of the heavy metals are largely bound to the residual phase (retained 71.4% of cadmium, 77.8% of chromium, 75% of copper, 47% of nickel, 62.8% of lead, and 75.8% of zinc). A likely sequence of mobility in the investigated soils is as follows: chromium > lead > nickel > cadmium > zinc > copper.     

Pilot-plant study of wastewater sludge decontamination using a ferrous sulfate bioleaching process.

The objective of this research was to investigate the performance of the ferrous sulfate bioleaching (FSBL) process in a pilot plant for decontamination and stabilization of wastewater sludge. Batch and continuous experiments, conducted with two 4-m3 bioreactors using indigenous iron-oxidizing bacteria (20% v/v of inoculum) with addition of 4.0 g ferrous sulfate heptahydrate per liter of sludge initially acidified to pH 4.0, were sufficient for effective heavy metal (cadmium, copper, manganese, zinc, and lead) removal yields. The average metal removal yields during the FSBL process were as follows: cadmium (69 to 75%), copper (68 to 70%), manganese (72 to 73%), zinc (65 to 66%), and lead (16%). The FSBL process was also found to be effective in removing both fecal and total coliforms (abatement > 5 to 6 log units). The nutrients content (nitrogen, phosphorus, and magnesium) were also preserved in decontaminated sludge.     

Bioleaching of heavy metals from sediment: significance of pH

Bioleaching process, which causes acidification and solubilization of heavy metals, is one of the promising methods for removing heavy metals from contaminated sediments. The solubilization of heavy metals from contaminated sediments is governed by the sediment pH. In the present study, the significance of pH in bioleaching of heavy metals from contaminated sediment was evaluated at different solid contents of sediments in a bench-scale reactor. Results showed that a temporal change of pH in the bioleaching process was effected by the buffering capacity of the sediment particulates. The variations of pH in this bioleaching process were calculated by a modified logistic model. It was observed that solubilization of heavy metals from sediments is highly pH-dependent. In addition, a non-linear equation for metal solubilization relating pH value in the bioleaching process was established. This allows an easier and faster estimate of metal solubilization by measuring pH in the bioleaching process.     

公路周边土壤重金属污染及植物修复

随着中国公路建设迅猛发展,公路周边土壤重金属污染也日趋严重。文中结合近年来国内外的研究情况,以公路土壤污染中的铅、镉、锌、铜、铬等元素为重点,对土壤重金属污染的危害、分布特征及其影响因素,以及相应的植物修复技术等相关研究进行综述。     

元素硫颗粒粒径对污泥重金属生物沥滤的影响

以城市污水处理厂剩余污泥作为处理介质,土著嗜酸氧化硫硫杆菌(Acidithiobacillus thiooxidans,A.thiooxi-dans)为主要沥滤微生物,采用序批式生物沥滤装置,就投加150~725μm的不同粒径元素硫对沥滤的酸化效果、硫酸根产率和重金属去除效果的影响进行了研究。结果表明,在元素硫投配量为3 g/L,曝气强度为1.0 L/(min.L)的条件下,元素硫粒径在165~215μm范围减小时能显著改善污泥酸化速度、提高酸化程度和硫酸根产率。底物元素硫的最佳粒径为165μm,此时沥滤体系pH下降速率为0.85个pH单位/d,硫酸根的产率为454.9 mg/(L.d),沥滤6 d后污泥中高浓度重金属Cu、Zn、Cd的去除率达到70.3%、81.2%、87.8%.     

Biosurfactant technology for remediation of cadmium and lead contaminated soils

This research focuses on column experiments conducted to evaluate the potential of environmentally compatible rhamnolipid biosurfactant produced by Pseudomonas aeruginosa strain BS2 to remove heavy metals (Cd and Pb) from artificially contaminated soil. Results have shown that di-rhamnolipid removes not only the leachable or available fraction of Cd and Pb but also the bound metals as compared to tap water which removed the mobile fraction only. Washing of contaminated soil with tap water revealed that approximately 2.7% of Cd and 9.8% of Pb in contaminated soil was in freely available or weakly bound forms whereas washing with rhamnolipid removed 92% of Cd and 88% of Pb after 36 h of leaching. This indicated that di-rhamnolipid selectively favours mobilization of metals in the order of Cd>Pb. Biosurfactant specificity observed towards specific metal will help in preferential elution of specific contaminant using di-rhamnolipid. It was further observed that pH of the leachates collected from heavy metal contaminated soil column treated with di-rhamnolipid solution was low (6.60-6.78) as compared to that of leachates from heavy metal contaminated soil column treated with tap water (pH 6.90-7.25), which showed high dissolution of metal species from the contaminated soil and effective leaching of metals with treatment with biosurfactant. The microbial population of the contaminated soil was increased after removal of metals by biosurfactant indicating the decrease of toxicity of metals to soil microflora. This study shows that biosurfactant technology can be an effective and nondestructive method for bioremediation of cadmium and lead contaminated soil.     

Performance evaluation of intermediate cover soil barrier for removal of heavy metals in landfill leachate

This pilot-scale study evaluated the use of intermediate cover soil barriers for removing heavy metals in leachate generated from test cells for co-disposed fly ash from municipal solid waste incinerators, ash melting plants, and shredder residue. Cover soil barriers were mixtures of Andisol (volcanic ash soil), waste iron powder, (grinder dust waste from iron foundries), and slag fragments. The cover soil barriers were installed in the test cells' bottom layer. Sorption/desorption is an important process in cover soil bottom barrier for removal of heavy metals in landfill leachate. Salt concentrations such as those of Na, K, and Ca in leachate were extremely high (often greater than 30 gL(-1)) because of high salt content in fly ash from ash melting plants. Concentrations of all heavy metals (nickel, manganese, copper, zinc, lead, and cadmium) in test cell leachates with a cover soil barrier were lower than those of the test cell without a cover soil barrier and were mostly below the discharge limit, probably because of dilution caused by the amount of leachate and heavy metal removal by the cover soil barrier. The cover soil barriers' heavy metal removal efficiency was calculated. About 50% of copper, nickel, and manganese were removed. About 20% of the zinc and boron were removed, but lead and cadmium were removed only slightly. Based on results of calculation of the Langelier saturation index and analyses of core samples, the reactivity of the cover soil barrier apparently decreases because of calcium carbonate precipitation on the cover soil barriers' surfaces.     

Microbial cellulose decomposition in soils from a rifle range contaminated with heavy metals

The objective of this study was to assess the effects of heavy metals on microbial decomposition of cellulose in heavy metal-contaminated soils using a cotton strip assay. The assay is a measure of the potential of soil microorganisms to decompose the plant polymer, cellulose. Cellulolytic activity in soil was assessed by determining the reduction in tensile strength of the buried cotton strips over a 25- and 45-day period. Soils were obtained from a rifle range that contain high levels of lead, copper and zinc. The site has been used for approximately 50 years, resulting in metal levels of up to 30,000 mg/kg of lead, 4000 mg/kg of copper and 600 mg/kg of zinc in the most contaminated soils. All the metal-contaminated soils had lower degradation rates than the uncontaminated soils tested. Among the contaminated soils, however, the heavy metal concentration was not the major factor in determining the loss in tensile strength of the cotton strips, where cellulose decomposition was governed by other soil physicochemical properties. Soil with a higher cation exchange capacity, readily oxidisable material and volatile solids content had the greatest loss in tensile strength of cotton strips. Microbial adaptation to the presence of high concentrations of soil heavy metals and reduced bioavailability of metals is the likely explanation for this phenomenon.     

电动与渗透反应格栅联合修复镉污染地下水实验

通过实验方法研究了地下水中镉污染的电动力学修复效果，并分析其迁移变化特征。实验结果表明，电动修复中由于阴阳两极的氧化还原反应造成电极附近pH值产生明显变化，其中阳极附近的pH值由开始时的7.0逐渐变小到6.8，而阴极附近则相反，由开始时6.9逐渐增大到9.1，表明土壤的酸碱条件变化明显。Cd浓度变化反映在自然渗透条件下含水层中重金属污染物的迁移能力较弱，阳极附近地下水中Cd的去除率仅8.4%，而在电场作用下地下水中重金属的浓度发生明显变化，使得重金属污染物能在电极附近富集而被去除，当实验电场强度为0.5 V/cm时，Cd在阴极的累积使得阳极附近地下水中去除率为72.9%，说明电动修复重金属Cd污染地下水的效果明显好于自然渗透状态。     

Fish and seafood availability in markets in the Baie des Chaleurs region, New Brunswick, Canada: a heavy metal contamination baseline study

The consumption of halieutic products has many health benefits. However, their contaminants loads need to be addressed to better understand the risk from consuming these products. The aquatic biota from the Baie des Chaleurs in New Brunswick is contaminated by cadmium, zinc and lead. In spite of this, no study has examined the heavy metal concentrations in commercial halieutic products sold in this Canadian region. The objective of this pilot study was to characterize the species and origin of fish and seafood sold in the Baie des Chaleurs region by using an ecosystemic approach. Additionally, a baseline picture of the heavy metal levels found in these products has been determined. In 2008, interviews were carried out in markets located in the Baie des Chaleurs area. Species that were identified as the most purchased were then bought for analysis. Samples were freeze-dried and homogenized before nitric acid digestions. Aluminum, copper, cadmium, iron, manganese, and zinc concentrations were determined by inductively coupled plasma optical emission spectrometry. Results show that 36 % of seafood species sold in markets were caught in the Baie des Chaleurs. Lobsters, shrimps, scallops and oysters are the most purchased species regardless of the season. High amounts of cadmium exceeding tolerable daily intake are found in lobster hepatopancreas and can cause deleterious effects on health, in particular in vulnerable populations such as children and heavy consumers. The ecosystemic approach to health used in this pilot study shows the feasibility of an exhaustive study on the exposure of coastal population to heavy metal from fish and seafood consumption and the source of halieutic products sold in markets.     

Biosorption of cadmium and copper contaminated water by Scenedesmus abundans

Experiments were conducted comparing the individual removals of cadmium and copper from water via biosorption using Scenedesmus abundans, a common green algae, to removal in a multi-component system to determine competitive effects, if any, between the metals. The goal was to characterize the biological treatment of water contaminated with heavy metals using live aquatic species. In addition, experiments were performed to measure cell viability as a function of metal concentration and also to compare metal removal using living species to that using nonliving ones. It was shown that, while both living and nonliving S. abundans removed cadmium and copper from water, living algae significantly outperformed nonliving algae. Further, in characterizing biosorption by three concentrations of live S. abundans, capacity curves were created comparing the metal biosorbed per mass algae to the initial metal concentration in solution. The algae concentration was not a factor in the biosorption of either metal individually, such that the capacity of the algae for the metal increased with decreasing algae concentration. At the lowest algae concentration considered, competitive effects were observed at copper and cadmium concentrations above 4 mg/l each. At the highest algae concentration considered, no competitive effects were observed in the range of cadmium and copper concentrations studied (1-7 mg/l). It was concluded that biological treatment of heavy metal contaminated water is possible and that at adequately high algae concentrations, multi-component metal systems can be remediated to the same level as individual metals.     

不同土壤重金属复合污染的有效态离子冲量表征

选择红壤、黄棕壤和潮土为对象，依据中国土壤环境质量二级和三级标准确定土壤重金属铜、锌、镉的污染浓度，通过生物盆裁试验研究在重金属Cu、Zn、Cd复合污染条件下牧草（黑麦草、紫花苜蓿）体内重金属含量和土壤中重金属有效态含量的相关性，结果表明，在3种不同性质的污染土壤上，牧草体内重金属的离子冲量与其对应土壤中重金属有效态的离子冲量之间均存在明显的相关性。校正土壤pH、牧草品种等因素后，土壤有效态离子冲量可以有效表征不同土壤-牧草系统的重金属复合污染。     

Municipal landfill leachate treatment for metal removal using water hyacinth in a floating aquatic system.

Experiments were carried out to investigate the ability of water hyacinth (Eichhornia crassipes) to remove five heavy metals (cadmium, chromium, copper, nickel, and lead) commonly found in leachate. All experiments were conducted in batch reactors in a greenhouse. It was found that living biomass of water hyacinth was a good accumulator for copper, chromium, and cadmium. The plants accumulated copper, chromium, and cadmium up to 0.96, 0.83, and 0.50%, respectively, of their dry root mass. However, lead and nickel were poorly accumulated in water hyacinth. Also, nonliving biomass of water hyacinth dry roots showed ability to accumulate all metals, except Cr(VI), which was added in anionic form. The highest total metal sorption by nonliving dry water hyacinth roots was found to take place at pH 6.4. The current research demonstrates the potential of using water hyacinth for the treatment of landfill leachate containing heavy metals.     

Chemical methods and phytoremediation of soil contaminated with heavy metals

The effects of chemical amendments (calcium carbonate (CC), steel sludge (SS) and furnace slag (FS)) on the growth and uptake of cadmium (Cd) by wetland rice, Chinese cabbage and wheat grown in a red soil contaminated with Cd were investigated using a pot experiment. The phytoremediation of heavy metal contaminated soil with vetiver grass was also studied in a field plot experiment. Results showed that treatments with CC, SS and FS decreased Cd uptake by wetland rice, Chinese cabbage and wheat by 23-95% compared with the unamended control. Among the three amendments, FS was the most efficient at suppressing Cd uptake by the plants, probably due to its higher content of available silicon (Si). The concentrations of zinc (Zn), lead (Pb) and Cd in the shoots of vetiver grass were 42-67%, 500-1200% and 120-260% higher in contaminated plots than in control, respectively. Cadmium accumulation by vetiver shoots was 218 g Cd/ha at a soil Cd concentration of 0.33 mg Cd/kg. It is suggested that heavy metal-contaminated soil could be remediated with a combination of chemical treatments and plants.