常用城市污水再生处理工艺净化效果比较分析

以城市污水回用为目的,对常规混凝-沉淀-过滤工艺、臭氧生物活性炭和直接超滤等深度处理技术处理城市污水处理厂二级出水的效果进行了试验研究,对各种工艺的去除效果进行了评价。     

Preparation of macromolecular heavy metal coagulant and treatment of wastewater containing copper.

Many treatment technologies for wastewater containing heavy metals have been developed in recent years, but these technologies have some disadvantages, such as poor removing efficiency and complex operation. For this reason, a macromolecular heavy metal coagulant polyethyleneimine-sodium xanthogenate (PEX) was prepared by grafting a xanthogenate group to polyethyleneimine. It was determined that PEX has the function of removing both turbidity and copper ions. It was also determined that copper ions and turbidity have a cooperative removal effect with each other in the process of treating wastewater containing both turbidity and copper ions by PEX. The investigation showed that PEX is an amphoteric polyelectrolyte. At lower pH values, the amino groups of the macromolecule are electrically positive; therefore, turbidity is removed because of electroneutralization coagulation; at higher pH values, both amino groups and xanthogenic radical groups contribute to the removal of heavy metals, as a result of chelation. Compared with traditional chemical precipitation by calcium oxide and coagulation by an ordinary inorganic coagulant, PEX showed obvious advantages, for example, removing both turbidity and copper ions, higher removal efficiency, lower suitable pH value, and higher floc settlement velocity.     

螯合沉淀法处理电镀废水的工业实践

介绍了一个采用螯合沉淀法处理电镀废水的典型工业实例.在工业装置上,进行了氢氧化钠、硫化钠和DT-CR去除重金属离子效果的对比,讨论了DTCR的加入量与处理成本的关系和pH值对DTCR用量的影响.结果表明,将废水的pH值调至8.0～8.5后再加DTCR,可以使DTCR的使用量最少,处理成本最低;此法对重金属离子的去除效果远优于传统化学沉淀法.     

污泥中重金属的去除及回收试验

论述了利用离子交换技术循环使用柠檬酸去除污泥中重金属,并置换回收重金属的适宜工艺条件.经柠檬酸处理后,污泥中90%以上的重金属被去除;柠檬酸处理液中的重金属用离子交换法回收,考察了树脂种类、流速、操作方式等因素对离子交换、再生效果的影响;在适宜工艺条件下,重金属的交换率均为100%,而洗脱率均接近90%;柠檬酸及离子交换树脂循环使用,重金属也得到回收,降低了处理成本.     

焦化废水处理过程外排污泥中重金属形态特征及其潜在环境风险

焦化废水处理过程所排放污泥中重金属的含量及化学形态是否构成环境风险将直接影响污泥处置方法的选择,为此,实验采用BCR顺序提取法分析了焦化废水处理站外排污泥中重金属(Cd、Hg、Pb、Cr、As、Ni、Zn、Cu和Mn)的形态特征,并采用地累积指数(Igeo)和潜在生态危害指数(RI)评价了重金属对土壤的潜在环境风险。研究结果表明:除Ni主要以可氧化态存在外,焦化废水外排污泥中其他几种重金属元素主要存在于残渣态,重金属元素的含量低于《城镇污水处理厂污染物排放标准(GB18918—2002)》中的控制限值;与城市污泥相比,焦化废水外排污泥具有低Pb、Cr、Zn、Cu含量,而高Cd、Hg、Mn含量的特点;基于Igeo和RI的评价结果,Cd和Hg是外排污泥中具有一定环境风险的元素,需要考虑其下游去向。焦化废水处理外排污泥中主要存在残渣态重金属成分,不表现为很高的环境风险,其处置应重点考虑其中有机污染物特别是POPs。     

Irrigation of certain Mediterranean plants with heavy metals

The ability of some Mediterranean plant species to absorb heavy metals present in wastewater from treatment plants is researched. Their tolerance to high concentrations of heavy metals is also assessed. Myoporum sp., Nerium oleander and Geranium sp. were irrigated with wastewater, normal irrigation water, and irrigation water enriched with metals. The concentration of metals in the wastewater, irrigation water, in the soil, and in the leaves, tissues and roots of the plants were measured. The results show that treatment of plants with wastewater gives slightly increased concentrations of metals in leaves and roots. In contrast, irrigation with high concentrations of Cu₂₊, Mn₂₊ and Zn₂₊ (up to 1000 mg/1) resulted to significantly higher concentrations of these metals in the roots than in the leaves. However, all plants have been shown to tolerate high concentrations of heavy metals except Nerium oleander, which exhibited strong toxicity in leaves. The tolerance of these Mediterranean plant species to polluted environments allows them to be irrigated by wastewater from treatment plants, so as to achieve the best environmental rehabilitation of desertified Mediterranean areas.     

Effect of sulfate reduction activity on biological treatment of hexavalent chromium [Cr(VI)] contaminated electroplating wastewater under sulfate-rich condition

Electroplating wastewater (EW) containing heavy metals was treated by a two-stage packed-bed reactor system. The EW was highly contaminated with hexavalent chromium and other heavy metals as well as sulfate because sulfuric acid had been mainly used to polish the surface of metals to be electroplated. This acidic EW was effectively neutralized in an alkaline reactor where limestone had been packed. The neutralized wastewater together with organic wastewater from a starch-processing factory (SPW) was fed to a bioreactor packed with waste biomass. The SPW was used to supplement the electron donor in the sulfidogenic bioreactor. During the whole operation, we investigated the stoichiometry of electron to see what could be a major factor to remove Cr in the wastewater. The removal rates of sulfate and Cr(VI) were dependent on the consumption rate of organic materials in the wastewater. The stoichiometric studies also showed that about 63% of electrons from oxidation of organic materials were used to reduce sulfate. When the electrons of sulfide oxidation to elemental sulfur was at least 1.3 times higher than that of Cr(VI) reduction to Cr(III), Cr(VI) was completely removed. This result suggests that Cr(VI) reduction can be expected to take place under sulfate-rich anaerobic conditions, and sulfide produced by sulfate reducing bacteria could be used to immobilize soluble chromium through Cr(VI) reduction.     

基于电化学反应原理的含铬工业废水处理技术

对于含重金属离子的工业废水处理来说,污染物的去除和回收往往是最重要的指标。以电化学反应原理为基础的污水处理新技术以其在金属回收利用方面的独特优越性引起了研究人员的很大兴趣。在分析中,从铬(VI)回收利用的角度出发,介绍了电化学技术处理含铬工业废水的基本电极反应,对外加电场存在与否的两种情况下的除铬(VI)机理进行了分析,介绍了各自的典型处理流程,并讨论了各自的主要影响因素。     

Hybrid process for heavy metal removal from wastewater sludge.

Bioleaching processes have been demonstrated to be effective technologies in removing heavy metals from wastewater sludge, but long hydraulic retention times are typically required to operate these bioprocesses. A hybrid process (coupling biological and chemical processes) has been explored in laboratory pilot-scale experiments for heavy metals (cadmium [Cd], copper [Cu], chromium [Cr], and zinc [Zn]) removal from three types of sludge (primary sludge, secondary activated sludge, and a mixture of primary and secondary sludge). The hybrid process consisted of producing a concentrate ferric ion solution followed by chemical treatment of sludges. Ferric iron solution was produced biologically via oxidation of ferrous iron by A. ferrooxidans in a continuous-flow stirred tank (5.2 L) reactor (CSTR). Wastewater sludge filtrate (WSF) containing nutrients (phosphorus and nitrogen) has been used as culture media to support the growth and activity of indigenous iron-oxidizing bacteria. Results showed that total organic carbon (TOC) concentrations of the culture media in excess of 235 mg/L were found to be inhibitory to bacterial growth. The oxidation rate increased as ferrous iron concentrations ranged from 10 to 40 g Fe2+/L. The percentage of ferrous iron (Fe2+) oxidized to ferric iron (Fe3+) increased as the hydraulic retention time (HRT) increased from 12 to 48 h. Successful and complete Fe2+ oxidation was recorded at a HRT of 48 h using 10 g Fe2+/L. Subsequently, ferric ion solution produced by A. ferrooxidans in sludge filtrate was used to solubilize heavy metals contained in wastewater sludge. The best solubilization was obtained with a mixture of primary and secondary sludge, demonstrating a removal efficiency of 63, 71, 49, and 80% for Cd, Cu, Cr, and Zn, respectively.     

Aquatic environments polluted with antibiotics and heavy metals: a human health hazard

Aquatic environments often receive wastewater containing pollutants such as antibiotics and heavy metals from hospital sewage, as well as contaminants from soil. The presence of these pollutants can increase the rate of exchange of resistant genes between environmental and pathogenic bacteria, which can make the treatment of various types of bacterial infections in humans and animals difficult, in addition to causing environmental problems such as ecological risk. In this study, two tetracycline-resistant Pseudomonas aeruginosa (EW32 and EW33), isolated from aquatic environments close to industries and a hospital in southeastern Brazil, were investigated regarding the possible association between tetracycline and heavy metal resistance. The isolate EW32 presented a conjugative plasmid with coresistance to tetracycline and copper, reinforcing the concern that antibiotic resistance by acquisition of plasmids can be induced by the selective pressure of heavy metals in the environment.     

Effect of Polonite used for phosphorus removal from wastewater on soil properties and fertility of a mountain meadow

Reactive filter materials used for phosphorus (P) removal from wastewater can be disposed of as soil amendments after treatment, thus recycling P and other macro- and micro-nutrients to plants. In addition, materials with a high pH and Ca content, such as Polonite, are potential soil conditioners, which can be particularly beneficial for acid soils. Polonite previously used for on-site wastewater treatment was applied as a soil amendment to a mountain meadow. The amendment significantly increased soil pH and decreased the hydrolytic acidity, thus reducing Al toxicity risks. The effects were comparable to those of liming. No difference in yield and P uptake by meadow plants was observed. The uptake of metals was lower for amended soils, especially the uptake of Mn. Using Polonite after wastewater treatment as a soil amendment is thus a viable disposal alternative that can replace liming, when necessary, being capable of recycling P and other nutrients to meadow plants.     

Enhanced removal of heavy metals in primary treatment using coagulation and flocculation.

The goal of this study was to determine the removal efficiencies of chromium, copper, lead, nickel, and zinc from raw wastewater by chemically enhanced primary treatment (CEPT) and to attain a total suspended solids removal goal of 80%. Operating parameters and chemical doses were optimized by bench-scale tests. Locally obtained raw wastewater samples were spiked with heavy metal solutions to obtain representative concentrations of metals in wastewater. Jar tests were conducted to compare the metals removal efficiencies of the chemical treatment options using ferric chloride, alum, and anionic polymer. The results obtained were compared with those from other studies. It was concluded that CEPT using ferric chloride and anionic polymer is more effective than CEPT using alum for metals removal. The CEPT dosing of 40 mg/L ferric chloride and 0.5 mg/L polymer enhanced heavy metals removal efficiencies by over 200% for chromium, copper, zinc, and nickel and 475% for lead, compared with traditional primary treatment. Efficient metals capture during CEPT can result in increased allowable headworks loadings or lower metal levels in the outfall.     

Comparison of bioluminescence and nitrification inhibition methods for assessing toxicity to municipal activated sludge

The aim of this study was to compare two alternative toxicity assessment methods to determine wastewater toxicity and predict treatment plant process upsets. The toxicity of two synthetic organic compounds (triclosan and 4-n-nonylphenol), which are commonly detected in municipal wastewater, and municipal and industrial wastewaters with different heavy metals content were evaluated by the nitrification inhibition assay and bioluminescence toxicity test. Comparison between both assays confirmed that Vibrio fischeri is generally more sensitive than autotrophic bacteria, and, if not calibrated, the bioluminescence method tends to overestimate toxic effects on activated sludge biomass. The nitrification inhibition assay appears to predict plant process upsets more accurately. Both methods showed a significant toxicity decrease through treatment that could be partially attributed to the significant heavy metals removal obtained by primary and secondary treatment. A good correlation for the two assays was obtained, as indicated by a high correlation coefficient (r2 = 0.80).     

Effects of Heavy metals on plants and resistance mechanisms

GOAL, SCOPE AND BACKGROUND: As one of the consequences of heavy metal pollution in soil, water and air, plants are contaminated by heavy metals in some parts of China. To understand the effects of heavy metals upon plants and the resistance mechanisms, would make it possible to use plants for cleaning and remediating heavy metal-polluted sites. METHODS: The research results on the effects of heavy metals on plants and resistant mechanisms are compiled from Chinese publications from scientific journals and university journals, mostly published during the last decade. RESULTS AND DISCUSSION: Effects of heavy metals on plants result in growth inhibition, structure damage, a decline of physiological and biochemical activities as well as of the function of plants. The effects and bioavailability of heavy metals depend on many factors, such as environmental conditions, pH, species of element, organic substances of the media and fertilization, plant species. But, there are also studies on plant resistance mechanisms to protect plants against the toxic effects of heavy metals such as combining heavy metals by proteins and expressing of detoxifying enzyme and nucleic acid, these mechanisms are integrated to protect the plants against injury by heavy metals. CONCLUSIONS: There are two aspects on the interaction of plants and heavy metals. On one hand, heavy metals show negative effects on plants. On the other hand, plants have their own resistance mechanisms against toxic effects and for detoxifying heavy metal pollution. RECOMMENDATIONS AND OUTLOOK: To study the effects of heavy metals on plants and mechanisms of resistance, one must select crop cultivars and/or plants for removing heavy metals from soil and water. More highly resistant plants can be selected especially for a remediation of the pollution site. The molecular mechanisms of resistance of plants to heavy metals should be studied further to develop the actual resistance of these plants to heavy metals. Understanding the bioavailability of heavy metals is advantageous for plant cultivation and phytoremediation. Decrease in the bioavailability to farmlands would reduce the accumulation of heavy metals in food. Alternatively, one could increase the bioavailability of plants to extract more heavy metals.     

Technology for recovering phosphorus from incinerated wastewater treatment sludge.

A bench-top study of phosphorus-recovering technology from ash associated with incinerated wastewater (sewage) treatment sludge was conducted by adding sulfuric acid to ashes for the elution of phosphorus. With the exception of lead, which is insoluble in sulfuric acid, when the pH of the ash fell below 2.0, phosphorus and various heavy metals in the ash were extracted. The study found that, when alkalis were added to adjust the pH of the ash extract to 4.0, phosphorus was subsequently recovered via filtration. Furthermore, when alkalis were added to adjust the pH to 10, the recovery of various heavy metals was observed. In addition, disposal of the remaining solution (wastewater), which consists of a relatively low concentration of salts, is not considered to be a significant issue since it is within wastewater discharge standards and has been found to be useful as an acid-treating substance.     

Retention and distribution of heavy metals in mangrove soils receiving wastewater

The distribution and chemical fractionation of heavy metals retained in mangrove soils receiving wastewater were examined by soil column leaching experiments. The columns, filled with mangrove soils collected from two swamps in Hong Kong and the People's Republic of China, were irrigated three times a week for 150 days with synthetic wastewater containing 4 mg l(-1) Cu, 20 mg l(-1) Zn, 20 mg l(-1) Mn and 0.4 mg l(-1) Cd. Soil columns leached with artificial seawater (without any heavy metals) were used as the control. At the end of the leaching experiments, soil samples from each column were divided into five layers according to its depth viz. 0-1, 1-3, 3-5, 5-10 and > 10 cm, and analyzed for total and extractable heavy metal content. The fractionation of heavy metals in the surface soil samples (0-1 cm) was investigated by the sequential extraction technique. In both types of mangrove soils, the surface layer (0-1 cm) of the columns receiving wastewater had significantly higher concentrations of total Cu, Cd, Mn and Zn than the control. Concentrations declined significantly with soil depth. The proportion of exchangeable heavy metals in soils receiving wastewater was significantly higher than that found in the control, about 30% of the total heavy metals accumulated in the soil masses of the treated columns were extracted by ammonium acetate at pH 4. The sequential extraction results show that in native mangrove soils (the soils without any treatment), the major portion of Cu, Zn, Mn and Cd was associated with the residual and precipitated fractions with very low concentrations in more labile phases. However, in mangrove soils receiving wastewater, a significantly higher percentage of Mn, Zn and Cd was found in the water-soluble and exchangeable fractions. Copper appeared to be more strongly adsorbed in mangrove soils than the other heavy metals. In general, heavy metal accumulation in the surface mangrove soils collected in Hong Kong was higher than those in the PRC, although the metals in the latter soil type were more strongly bound. These findings suggest that whether the heavy metal retained in managrove soils becomes a secondary source or a permanent sink would depend on the kinds of heavy metals and also the types of mangrove soils.     

污水土壤含水层处理系统原理、管理、效率和应用

论述了污水土壤含水层处理系统中的地球化学过程.该系统通过对污染物的机械过滤、生物化学转化和降解过程、吸附/解吸过程、氧化/还原过程、沉淀/溶解过程、以及矿物的合成过程净化污水.运作周期通常为1～2 d灌水/4～5 d排干,年水力负荷变化于15～100 m之间,应根据季节变化调整水力负荷.该系统能有效去除污水中的微生物和悬浮物,降低COD和BOD含量,和去除潜在的有毒的无机成分,如重金属和含氧阴离子.作为一种低投资、低能耗、高净化效率、运行简单的自然的污水处理技术,其在世界各国得到了广泛应用.我国部分地区水资源极其短缺,在土壤和气候条件适合的地区,应用土壤含水层处理技术处理污水,实现污水资源化,既解决了污水污染环境问题,又将在一定程度上缓解该地区的水资源短缺问题,对于经济与环境的协调发展具有重要意义.     

蒙自矿冶重金属冶炼废水处理工程改造与实践

蒙自矿冶重金属冶炼废水深度处理工程主要对含重金属污酸和酸性污水处理系统进行改造。针对原有中和处理法存在的诸多问题，本工程在石灰中和处理的基础上新增电絮凝处理系统、化学沉淀微滤处理系统和深度处理系统。工程实践表明，该深度处理工程运行稳定，自动化程度高，处理效果好，废水达到《地表水环境质量标准（GB3838．2002）》Ⅲ类标准，经过处理后的水可全部用于生产系统，实现零排放，同时为冶炼行业重金属废水治理和污染控制提供实践经验。     

Human health implications of clinically relevant bacteria in wastewater habitats

The objective of this review is to reflect on the multiple roles of bacteria in wastewater habitats with particular emphasis on their harmful potential for human health. Indigenous bacteria promote a series of biochemical and metabolic transformations indispensable to achieve wastewater treatment. Some of these bacteria may be pathogenic or harbour antibiotic resistance or virulence genes harmful for human health. Several chemical contaminants (heavy metals, disinfectants and antibiotics) may select these bacteria or their genes. Worldwide studies show that treated wastewater contain antibiotic resistant bacteria or genes encoding virulence or antimicrobial resistance, evidencing that treatment processes may fail to remove efficiently these bio-pollutants. The contamination of the surrounding environment, such as rivers or lakes receiving such effluents, is also documented in several studies. The current state of the art suggests that only some of antibiotic resistance and virulence potential in wastewater is known. Moreover, wastewater habitats may favour the evolution and dissemination of new resistance and virulence genes and the emergence of new pathogens. For these reasons, additional research is needed in order to obtain a more detailed assessment of the long-term effects of wastewater discharges. In particular, it is important to measure the human and environmental health risks associated with wastewater reuse.     

Heavy metals removal from electroplating wastewater by aminopropyl-Si MCM-41

The potential of removing nickel and copper from industrial electroplating wastewaters by using mesoporous materials with MCM-41 type structure functionalised with different ratios of aminopropyl groups, namely Na50, Na25 and Na5, were evaluated. The synthesised solids sorbents obtained were characterised by X-ray diffraction, elemental chemical analysis and IR spectroscopy. In preliminary experiments, studies were carried out to determine the optimal experimental conditions for the retention of heavy ions. Effects of concentration, optimal pH, interference with humic substances and other metals were studied for Na5, which showed the best capacity of absorption determined by the corresponding isotherm. This material has a greater selectivity against sodium, indicating that ionic strength does not affect the extraction. Results of an application of this material to remove nickel and copper in synthetic and real industrial wastewater samples from an electrochemical industry area are shown with successful results. The lowest level of nickel and copper were observed when Na5 was used. This observation suggests that reactive aminopropyl-Si MCM-41 and similar materials may be a promising and provide for alternative environmental technologies in the future.