Hazardous Waste Minimization: Part VII (A) Hazardous Waste Minimization within the Department of Defense

This article is a series of representative case studies of Department of Defense hazardous waste minimization. Each Military Department and the Defense Logistics Agency describe actual accomplishments. Areas covered range from production line modification to product specification change. These efforts are part of a Department of Defense plan composed of individual programs executed independently by each military service and defense agency.

Part VII of the hazardous waste minimization series appears in two separate installments: this installment, Part VII (A), deals with Department of Defense waste minimization efforts in vehicle repair operations, explosives manufacturing, and abrasive blasting processes; Part VII (B) will cover shipboard mercury wastes, industrial chemical control, solvent reclamation, and hazardous property sales efforts.     

Hazardous Waste Minimization: Part Vii (B) Hazardous Waste Minimization within the Department of Defense

This article is a series of representative case studies of Department of Defense hazardous waste minimization. Each Military Department and the Defense Logistics Agency describe actual accomplishments. Areas covered range from production line modification to product specification change. These efforts are part of a Department of Defense plan composed of individual programs executed independently by each military service and defense agency.

Part VII of the hazardous waste minimization series appears in two separate installments: the first installment, Part VII (A), dealt with Department of Defense waste minimization efforts in vehicle repair operations, explosives manufacturing, and abrasive blasting processes; Part VII (B) covers shipboard mercury wastes, industrial chemical control, solvent reclamation, and hazardous property sales efforts.     

Automated Economic Analysis Model For Hazardous Waste Minimization

Abstract

The U.S. Army has established a policy of achieving a 50 percent reduction in hazardous waste generation by the end of 1992. To assist the Army in reaching this goal, the Environmental Division of the U.S. Army Construction Engineering Research Laboratory (USACERL) designed the Economic Analysis Model for Hazardous Waste Minimization (EAHWM). The EAHWM was designed to allow the user to evaluate the life cycle costs for various techniques used in hazardous waste minimization and to compare them to the life cycle costs of current operating practices. The program was developed in C language on an IBM compatible PC and is consistent with other pertinent models for performing economic analyses. The potential hierarchical minimization categories used in EAHWM Include source reduction, recovery and/or reuse, and treatment. Although treatment is no longer an acceptable minimization option, its use is widespread and has therefore been addressed in the model. The model allows for economic analysis for minimization of the Army’s six most important hazardous waste streams. These include, solvents, paint stripping wastes, metal plating wastes, industrial waste-sludges, used oils, and batteries and battery electrolytes. The EAHWM also includes a general application which can be used to calculate and compare the life cycle costs for minimization alternatives of any waste stream, hazardous or non-hazardous. The EAHWM has been fully tested and implemented in more than 60 Army installations in the United States.     

Hazardous Waste Minimization: Part V Waste Minimization in the Petroleum Industry

The extractive nature of the petroleum industry sets it apart from other industries in many respects. The nature of this industry places it at somewhat of a disadvantage to other industries when attempts are made to foster waste minimization practices and programs. However, this is no excuse for the industry to not further vigorously pursue minimizing waste. This paper describes the petroleum industry and the products it makes along with their associated waste streams. The industry’s commitment to waste minimization is described with examples of specific minimization projects provided. Although the opportunities for minimization are limited, the economic incentives for reducing waste disposal costs, not to mention long term liability from improper disposal practices, has put the petroleum industry on the road to waste minimization.     

Hazardous Waste Minimization: Part VI Waste Minimization in the Foundry Industry

The foundry industry is a major consumer of waste materials (scrap). Unfortunately, the recycling of these waste materials can result in the generation of hazardous wastes that must be properly managed at a significant cost. This article focuses on two waste streams in the foundry industry; calcium carbide desulfurization slag and melt emission control residuals. The author presents an overview of how foundries have evaluated different waste management options with the ultimate goal of minimizing the generation of hazardous waste.     

Life Cycle Approach to Effective Waste Minimization

In the Hazardous and Solid Waste Amendments of1984, Congress declared the objective of the national waste policy to be "to promote the protection of health and the environment and to conserve valuable material and energy resources." Further, Congress stated that this would be done by minimizing the generation and land disposal of hazardous waste by encouraging process substitutions, materials recovery, proper recycling and reuse, and treatment.

This paper presents the approach used by 3M to find innovative ways to minimize the amount of hazardous waste which ultimately must be disposed by landfilling. The life cycle of waste is examined, looking at how it can be reduced or eliminated starting with the point of generation in the manufacturing operation, to its processing, treatment or ultimate disposal as a residual hazardous waste. Case histories are used as examples of how waste can be minimized in each stage of the life cycle, with emphasis on innovative alternatives that have arisen out of the 3Mprogram.     

Hazardous Waste Minimization: Part II Waste Minimization in the Electronics Products Industries

An overview is provided of the production processes, waste generation, and waste management of the electronics products industries. Chosen product areas include electron tubes, semiconductors, capacitors/resistors, and printed circuit/wiring boards. Examples are given of specific processes and associated waste streams. Waste minimization activities are identified, and specific examples of successful applications provided. While faced with a wide variety of waste streams, many opportunities for waste minimization exist and await only application.     

Hazardous Waste Minimization: Part VIII Waste Minimization in the Pesticide Formulation Industry

The pesticide formulation industry is dependent upon the basic manufacturers for the main raw materials. Waste minimization efforts are, therefore, limited to process/handling sources. The economic incentive for waste reduction has mandated significant changes throughout each facility. There are waste problems, however, that require industry-wide action, e.g., empty containers. The ongoing regulatory actions affecting this business will require continuing efforts to maintain operations.     

Hazardous Waste Minimization: Part X The Waste Minimization Assessment: A Useful Tool for the Reduction of Industrial Hazardous Wastes

This article describes the “nuts and bolts” of implementing a waste minimization program at an industrial facility which has made a commitment to carry out such a program for waste reduction and/or elimination. Under EPA sponsorship, a waste minimization assessment methodology has been developed and applied in a total often such assessments at industrial and DOD facilities. The article reviews the eleven distinct steps that represent the preferred procedure for carrying out a waste minimization assessment at an industrial site. This procedure is presented in detail in the recently published “The EPA Manual for Waste Minimization Opportunity Assessments.” Two case studies are presented which have employed this methodology to develop waste reduction options in the areas of source reduction and recycle/reuse. Lessons learned during the development and application of this methodology are also presented.     

Public Policy impacts on the Generation and Disposal of Hazardous Waste in New York State

A number of policies adopted by the federal government and the states have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects.

Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to “higher” waste handling technologies in response to several policy interventions.     

Refinery Sludge Treatment/Hazardous Waste Minimization Via Dehydration and Solvent Extraction

Abstract

The patented Carver-Greenfield (C-G) Process®, a combination of dehydration and solvent extraction treatment technologies, has a wide range of uses in separating hydrocarbon solvent-soluble hazardous organic contaminants (indigenous oil) from sludges, soils, and industrial wastes. As a result of this treatment, the products from a C-G Process facility are: ? Clean, dry solids which are typically suitable for disposal in nonhazardous landfills;

? Water which is treatable in an industrial or Publicly Owned Treatment Works (POTW) wastewater treatment facility;

? Extracted indigenous oil containing hydrocarbon soluble contaminants which may be recycled or reused or disposed of at less cost because its volume is smaller than the original waste feed.

The C-G Process was demonstrated on spent oily drilling fluids as part of the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation (SITE) Program. This paper summarizes the use of the C-G Process for economical treatment and minimization of hazardous refinery wastes, reviews the SITE program results, and describes extending the C-G Process technology to treatment of other wastes. Estimated treatment costs are presented.     

Hazardous Waste Minimization: Part I Waste Reduction in the Chemical Industry

Recognizing the need for minimizing the generation of hazardous waste, the chemical industry is experiencing a surge in the initiation of programs for reducing such waste. With a new realization that the cost of handling waste may be many times higher than the value of the materials lost in it, the industry needs to examine a new end-point for optimizing its processes; one that includes the total cost of waste management as well as the conventional cost elements such as raw materials, power and the like. The authors discuss some of the problems that industry is encountering; then describe Du Pont’s approach to waste reduction in terms of administrative and technical activities. They emphasize that, in addition to meeting environmental needs, waste reduction often makes good sense solely from an economic point of view.     

Avoiding Land Disposal of Hazardous Waste

In response to a growing societal mandate, land disposal of hazardous wastes is gradually being replaced by treatment technologies. This shift to "alternative technologies" is the result of the impacts of past land disposal practices on other environmental media (groundwater, surface water, and air). A prime motivation for adopting alternatives to land disposal is to eliminate these cross-media impacts. Alternative technologies, however, can themselves have cross-media environmental impacts which must be recognized and addressed before such technologies are extensively applied. This paper discusses hazardous waste constituents, common disposal practices, alternative technologies currently being applied, possible cross-media environmental impacts of the alternative technologies, and proposed methods of mitigating these environmental impacts. Case studies from uncontrolled hazardous waste sites and industrial operations are used to illustrate the application of alternative technologies. Case studies include the application of waste treatment technologies as well as the adoption of waste minimization techniques.     

Chemical Manufacturers Association 1984 Hazardous Waste Survey

This paper discusses the Chemical Manufacturers Association's 1984 survey of the chemical industry's hazardous waste management practices. The survey data include a breakdown of how the industry's hazardous wastes are managed, detailing generation, treatment and disposal, and cover 725 plants in 81 companies. The 1984 survey is the third CM A hazardous waste survey, and the paper discusses resultant waste treatment trends from 1981- 1984, the period covered by previous surveys. A total of 278.5 million tons of hazardous waste was treated and disposed by survey respondents. Of this, 276.8 million tons was hazardous wastewater and 1.7 million tons was solid hazardous waste. The survey solid hazardous waste total was projected to the entire industry (Standard Industrial Code 2800) and is estimated at 6.9 million tons. The survey showed continued decreasing trends in hazardous waste generation in the chemical industry. It demonstrated changes in hazardous waste management practices, with decreased use of landfills and increased incineration of the solid wastes that are generated.     

Public policy impacts on the generation and disposal of hazardous waste in New York State

A number of policies adopted by the federal government and the state have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects. Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to "higher" waste handling technologies in response to several policy interventions.     

A Survey of Graduate Education in Hazardous Waste Management

A brief, informal survey questionnaire was sent to 69 universities in the U.S. Forty-two schools responded. Of the 42 respondents, 30 offered one or more courses in hazardous waste management. The average number of courses offered was 1.76 at an average frequency of once per year. Approximately 400 students take the hazardous waste management courses each year. Only four schools provided explicit laboratory training in hazardous waste analysis/treatment. Sixty-nine percent of the respondents have a research program in hazardous waste management. Typical course outlines are presented. Equipment needs for a hazardous waste laboratory are suggested.     

浅谈无锡市危险废物产生情况与处置现状

无锡市作为江苏重点发展的城市,随着社会和经济的快速发展,危险废物产生量和种类不断增多。文中针对无锡市2011年—2018年危险废物产生量、综合利用与处置情况,分析危险废物处置利用存在的问题,同时,就目前危险废物存在的问题,提出科学合理的建议。     

危险废物处理技术进展及若干建议

较系统地论述了国内固体废物的目前状况、产量，分析了一些典型危险废物处理过程中存在的主要问题和解决方法，提出了深人开展危险废物处理与资源化研究的方向，并给出了环保部门应对危险废物进行处理的建议。     

Towards sets of hazardous waste indicators. Essential tools for modern industrial management

Decision-makers require useful tools, such as indicators, to help them make environmentally sound decisions leading to effective management of hazardous wastes. Four hazardous waste indicators are being tested for such a purpose by several countries within the Sustainable Development Indicator Programme of the United Nations Commission for Sustainable Development. However, these indicators only address the 'down-stream' end-of-pipe industrial situation. More creative thinking is clearly needed to develop a wider range of indicators that not only reflects all aspects of industrial production that generates hazardous waste but considers socio-economic implications of the waste as well. Sets of useful and innovative indicators are proposed that could be applied to the emerging paradigm shift away from conventional end-of-pipe management actions and towards preventive strategies that are being increasingly adopted by industry often in association with local and national governments. A methodological and conceptual framework for the development of a core-set of hazardous waste indicators has been developed. Some of the indicator sets outlined quantify preventive waste management strategies (including indicators for cleaner production, hazardous waste reduction/minimization and life cycle analysis), whilst other sets address proactive strategies (including changes in production and consumption patterns, eco-efficiency, eco-intensity and resource productivity). Indicators for quantifying transport of hazardous wastes are also described. It was concluded that a number of the indicators proposed could now be usefully implemented as management tools using existing industrial and economic data. As cleaner production technologies and waste minimization approaches are more widely deployed, and industry integrates environmental concerns at all levels of decision-making, it is expected that the necessary data for construction of the remaining indicators will soon become available.     

Utilization of Dry Calcium Based Flue Gas Desulfurization Waste as a Hazardous Waste Fixation Agent

Several designated hazardous wastes (metal plating waste, oil sludge, heavy metal processing sludge) were studied relative to potential detoxification using dry calcium based FGD sludges. The FGD waste was generated from a pilot scale system which utilized slurried lime, a spray drier, and a bag filter. Following detailed physical and chemical identification of the raw FGD and hazardous wastes, various mixtures were prepared and cured. In all cases, even with the organic sludge, a rigid structural material evolved due to the pozzolanic reactions occurring from the wetted dry FGD waste. Structural characteristics, physical character, and chemical leaching effects were evaluated. The solids were leached via both EPA-RCRA and ASTM proposed leaching procedures. In all cases, the hazardous constituents were retained and not leached. Finally, the feasibility of using dry FGD wastes as fixating materials is discussed.