Field-scale colloid migration experiments in a granite fracture

An understanding of particle migration in fractured rock, required to assess the potential for colloid-facilitated transport of radionuclides, can best be evaluated when the results of laboratory experiments are demonstrated in the field. Field-scale migration experiments with silica colloids were carried out at AECL's Underground Research Laboratory (URL), located in southern Manitoba, to develop the methodology for large-scale migration experiments and to determine whether colloid transport is possible over distances up to 17 m. In addition, these experiments were designed to evaluate the effects of flow rate and flow path geometry, and to determine whether colloid tracers could be used to provide additional information on subsurface transport to that provided by conservative tracers alone. The colloid migration studies were carried out as part of AECL's Transport Properties in Highly Fractured Rock Experiment, the objective of which was to develop and demonstrate methods for evaluating the solute transport characteristics of zones of highly fractured rock. The experiments were carried out within fracture zone 2 as two-well recirculating, two-well non-recirculating, and convergent flow tests, using injection rates of 5 and 10 1 min⁻¹. Silica colloids with a 20 nm size were used because they are potentially mobile due to their stability, small size and negative surface charge. The shapes of elution profiles for colloids and conservative tracers were similar, demonstrating that colloids can migrate over distances of 17 m. The local region of drawdown towards the URL shaft affected colloid migration and, to a lesser extent, conservative tracer migration within the flow field established by the two-well tracer tests. These results indicate that stable colloids, with sizes as small as 20 nm, have different migration properties from dissolved conservative tracers. - 1997 Atomic Energy of Canada.     

Strontium migration in a crystalline medium: effects of the presence of bentonite colloids

The effects of bentonite colloids on strontium migration in fractured crystalline medium were investigated. We analyzed first the transport behaviour of bentonite colloids alone at different flow rates; then we compared the transport behaviour of strontium as solute and of strontium previously adsorbed onto stable bentonite colloids at a water velocity of approximately 7.1·10(-6)m/s-224m/yr. Experiments with bentonite colloids alone showed that - at the lowest water flow rate used in our experiments (7.1·10(-6)m/s) - approximately 70% of the initially injected colloids were retained in the fracture. Nevertheless, the mobile colloidal fraction, moved through the fracture without retardation, at any flow rate. Bentonite colloids deposited over the fracture surface were identified during post-mortem analyses. The breakthrough curve of strontium as a solute, presented a retardation factor, R(f)~6, in agreement with its sorption onto the granite fracture surface. The breakthrough curve of strontium in the presence of bentonite colloids was much more complex, suggesting additional contributions of colloids to strontium transport. A very small fraction of strontium adsorbed on mobile colloids moved un-retarded (R(f)=1) and this fraction was much lower than the expected, considering the quantity of strontium initially adsorbed onto colloids (90%). This behaviour suggests the hypothesis of strontium sorption reversibility from colloids. On the other hand, bentonite colloids retained within the granite fracture played a major role, contributing to a slower strontium transport in comparison with strontium as a solute. This was shown by a clear peak in the breakthrough curve corresponding to a retardation factor of approximately 20.     

Migration of colloids in discretely fractured porous media: effect of colloidal matrix diffusion

Numerical simulations of colloid transport in discretely fractured porous media were performed to investigate the importance of matrix diffusion of colloids as well as the filtration and remobilization of colloidal particles in both the fractures and porous matrix. To achieve this objective a finite element numerical code entitled COLDIFF was developed. The processes that COLDIFF takes into account include advective-dispersive transport of colloids, filtration and remobilization of colloidal particles in both fractures and porous matrix, and diffusive interactions of colloids between the fractures and porous matrix. Three sets of simulations were conducted to examine the importance of parameters and processes controlling colloid migration. First, a sensitivity analysis was performed using a porous block containing a single fracture to determine the relative importance of various phenomenological coefficients on colloid transport. The primary result of the analysis showed that the porosity of the matrix and the process of colloid filtration in fractures play important roles in controlling colloid migration. Second, simulations were performed to replicate and examine the results of a laboratory column study using a fractured shale saprolite. Results of this analysis showed that the filtration of colloidal particles in the porous matrix can greatly affect the tailing of colloid concentrations after the colloid source was removed. Finally, field-scale simulations were performed to examine the effect of matrix porosity, fracture filtration and fracture remobilization on long-term colloid concentration and migration distance. The field scale simulations indicated that matrix diffusion and fracture filtration can significantly reduce colloid migration distance. Results of all three analyses indicated that in environments where porosity is relatively high and colloidal particles are small enough to diffuse out of fractures, the characteristics of the porous matrix that affect colloid transport become more important than those of the fracture network. Because the properties of the fracture network tend to have greater uncertainty due to difficulties in their measurement relative to those of the porous matrix, prediction uncertainties associated with colloid transport in discretely fractured porous media may be reduced.     

Laboratory migration experiments with radionuclides and natural colloids in a granite fracture

Natural colloids in groundwater could facilitate radionuclide transport, provided the colloids are mobile, are present in sufficient concentrations and can adsorb radionuclides. This paper describes the results of a laboratory migration study carried out with combinations of radionuclides and natural colloids within a fracture in a large granite block to experimentally determine the impact of colloids on radionuclide transport. The 85Sr used in this study is an example of a moderately sorbing radionuclide, while the 241Am is typical of a strongly sorbed radionuclide with very low solubility. The natural colloids used in this study were isolated from granite groundwater from Atomic Energy of Canada (AECL) Underground Research Laboratory (URL), and consisted of mostly 1-10 nm organic colloids, along with lesser amounts of 10-450 nm colloids (organics and aluminosilicates). The measured coefficients for radionuclide sorption onto these colloids were between 3 x 10(2) and 1 x 10(3) ml/g for 85Sr, and between 7 x 10(4) and 7 x 10(5) mg/l for 241Am. The 85Sr sorption on the natural colloids appeared to be reversible. Migration experiments in the granite block were carried out by establishing a flow field between two boreholes (out of a total of nine) intersecting a main horizontal fracture. These experiments showed that dissolved 85Sr behaved as a moderately sorbing tracer, while dissolved 241Am was completely adsorbed by the fracture surfaces and showed no evidence of transport. However, when natural colloids were injected together with dissolved 241Am, a small amount of 241Am transport was observed, demonstrating the ability of natural colloids to facilitate the transport of radionuclides with low solubility. Natural colloids had only a minor effect on the transport of 85Sr. In a separate experiment to test the effect of higher colloid concentrations on 85Sr migration, synthetic colloids were produced from Avonlea bentonite. The introduction of a relatively high concentration of bentonite colloids actually reduced 85Sr transport because, compared to natural colloids, the bentonite colloids were less mobile and they sorbed 85Sr more strongly.     

Colloid and suspended particle migration experiments in a granite fracture

To determine the mobility of colloids (0.001–0.45 μm) and suspended particles (> 0.45 μm) in granite fractures, laboratory particle-migration and conservative tracer studies have been carried out in a natural fracture within a large granite block, with overall dimensions of 83×90×60 cm. Flow fields within this horizontal fracture were controlled through a set of 9 boreholes drilled orthogonally to the fracture. Laboratory experiments were performed using a range of average water velocities which contained values low enough to closely approximate the natural flow velocities of < 2 m yr⁻¹ in plutonic rocks of the Canadian Shield. The particles used had diameters between 0.02 and 22 μm, and included latex spheres, glass spheres and colloidal silica. Migration experiments were carried out with a filtered groundwater, ionic strength of 0.01 mol kg⁻¹, obtained from a granite fracture within the Whiteshell Research Area of Manitoba. Flushing experiments showed that suspended particles as large as 40 μm could be mobilized from the fracture surface. The mobility of suspended particles was significantly less than that of colloids. However, within the size range of colloids used in these studies (0.022–0.090 μm), colloid size did not affect colloid migration. Although, in general, colloids eluted ahead of the conservative tracer, colloid mobility was significantly reduced when the average groundwater velocity dropped below between 32 and 240 m yr⁻¹. Colloid transport was found to be very sensitive to flow path and flow direction.     

Modelling radionuclide transport for time varying flow in a channel network

Water flowrates and flow directions may change over time in the subsurface for a number of reasons. In fractured rocks flow takes place in channels within fractures. Solutes are carried by the advective flow. In addition, solutes may diffuse in and out of stagnant waters in the rock matrix and other stagnant water regions. Sorbing species may sorb on fracture surfaces and on the micropore surfaces in the rock matrix. We present a method by which solute particles can be traced in flowing water undergoing changes in flowrate and direction in a complex channel network where the solutes can also interact with the rock by diffusion in the rock matrix. The novelty of this paper is handling of diffusion in the rock matrix under transient flow conditions. The diffusive processes are stochastic and it is not possible to follow a particle deterministically. The method therefore utilises the properties of a probability distribution function for a tracer moving in a fracture where matrix diffusion is active. The method is incorporated in a three dimensional channel network model. Particle tracking is used to trace out a multitude of flowpaths, each of which consists of a large number of channels within fractures. Along each channel the aperture and velocity as well as the matrix sorption properties can vary. An efficient method is presented whereby a particle can be followed along the variable property flowpath. For stationary flow conditions and a network of channels with advective flow and matrix diffusion, a simple analytical solution for the residence time distribution along each pathway can be used. Only two parameter groups need to be integrated along each path. For transient flow conditions, a time stepping procedure that incorporates a stochastic Monte-Carlo like method to follow the particles along the paths when flow conditions change is used. The method is fast and an example is used for illustrative purposes. It is exemplified by a case where land rises due to glacial rebound. It is shown that the effects of changing flowrates and directions can be considerable and that the diffusive migration in the matrix can have a dominating effect on the results.     

Particle transport in unsaturated fractured chalk under arid conditions

A series of field and laboratory experiments were conducted to study the mechanisms of particle detachment and transport from fractures in vadose chalk. Experiments of intermittent flow events along fracture surfaces were carried out in the laboratory. In the field, water was percolated from land surface via a discrete fracture into a compartmental sampler installed inside a horizontal corehole located I m below the surface. The mass, size distribution, and composition of the particles drained from the fracture voids were examined along with flow rates and salt dissolution. Two boreholes penetrating the underlying saturated zone were sampled and analyzed for colloidal concentration and composition. Most of the particle and solute release at the drained effluents occurred during the first several hours of flow, but erratic pulses of particles were still observed after long periods of time. Most of the detached particles had a mean diameter of >2 microm, while the mobile colloidal phase in the groundwater had a mean diameter of approximately 1 microm. Mineralogical composition of the groundwater colloids and the particles detached from the upper vadose fracture were similar. Laboratory observations demonstrated the importance of the existence of a coating layer, made of weathered particles and salts, on particle detachment. The results of this study suggest that: (1) particle detachment causes flow-rate variability in the unsaturated fracture; (2) the mechanisms of particle detachment and salt dissolution within the fracture are linked: and (3) although most of the detached particles are large and likely to accumulate inside fractures, some colloidal particles also eroded from the fracture void and are likely to be transported to the groundwater.     

Channel flow and trichloroethylene treatment in a partly iron-filled fracture: experimental and model results

Technical developments have now made it possible to emplace granular zero-valent iron (Fe(0)) in fractured media to create a Fe(0) fracture reactive barrier (Fe(0) FRB) for the treatment of contaminated groundwater. To evaluate this concept, we conducted a laboratory experiment in which trichloroethylene (TCE) contaminated water was flushed through a single uniform fracture created between two sandstone blocks. This fracture was partly filled with what was intended to be a uniform thickness of iron. Partial treatment of TCE by iron demonstrated that the concept of a Fe(0) FRB is practical, but was less than anticipated for an iron layer of uniform thickness. When the experiment was disassembled, evidence of discrete channelised flow was noted and attributed to imperfect placement of the iron. To evaluate the effect of the channel flow, an explicit Channel Model was developed that simplifies this complex flow regime into a conceptualised set of uniform and parallel channels. The mathematical representation of this conceptualisation directly accounts for (i) flow channels and immobile fluid arising from the non-uniform iron placement, (ii) mass transfer from the open fracture to iron and immobile fluid regions, and (iii) degradation in the iron regions. A favourable comparison between laboratory data and the results from the developed mathematical model suggests that the model is capable of representing TCE degradation in fractures with non-uniform iron placement. In order to apply this Channel Model concept to a Fe(0) FRB system, a simplified, or implicit, Lumped Channel Model was developed where the physical and chemical processes in the iron layer and immobile fluid regions are captured by a first-order lumped rate parameter. The performance of this Lumped Channel Model was compared to laboratory data, and benchmarked against the Channel Model. The advantages of the Lumped Channel Model are that the degradation of TCE in the system is represented by a first-order parameter that can be used directly in readily available numerical simulators.     

Transport of reactive colloids and contaminants in groundwater: effect of nonlinear kinetic interactions

Transport of reactive colloids in groundwater may enhance the transport of contaminants in groundwater. Often, the interpretation of results of transport experiments is not a simple task as both reactions of colloids with the solid matrix and reactions of contaminants with the solid matrix and mobile and immobile colloids may be time dependent and nonlinear. Further colloid transport properties may differ from solute transport properties. In this paper, a one-dimensional model for coupled and contaminant in a porous medium (COLTRAP) is presented together with simulation results. Calculated breakthrough curves (BTC's) during contamination and decontamination show systematically the effect of nonlinear and kinetic interactions on contaminant transport in the presence of reactive colloids, and the effect of colloid transport properties that differ from solute transport properties. It is shown that in case of linear kinetic reactions, the rate of exchange of mobile and immobile colloids have a large impact on the shape of BTC's even if the solid matrix is saturated with respect to colloids. BTC's during the contamination and decontamination phase have identical shapes in this case. Moreover, the slow reactions of contaminants and colloids may lead to unretarded breakthrough of contaminants. Independent of reaction rates, nonlinear reactions lead to BTC's that are steeper during contamination than in the linear case. A characteristic aspect of nonlinear sorption is that shapes of BTC's differ during the contamination and decontamination phase. It has been observed that shapes of some of the simulated adsorption and desorption curves are similar as shapes found in experiments reported in literature. This stresses the importance of incorporating both kinetics and nonlinearity in models for coupled colloid and contaminant transport and the capability of COLTRAP to interpret experimental results. Finally, to figure out whether nonlinear processes play a role, it is very important to consider both contamination and decontamination in transport experiments.     

Humic colloid-borne migration of uranium in sand columns

Column experiments were carried out to investigate the influence of humic colloids on subsurface uranium migration. The columns were packed with well-characterized aeolian quartz sand and equilibrated with groundwater rich in humic colloids (dissolved organic carbon (DOC): 30 mg dm(-3)). U migration was studied under an Ar/1% CO2 gas atmosphere as a function of the migration time, which was controlled by the flow velocity or the column length. In addition, the contact time of U with groundwater prior to introduction into a column was varied. U(VI) was found to be the dominant oxidation state in the spiked groundwater. The breakthrough curves indicate that U was transported as a humic colloid-borne species with a velocity up to 5% faster than the mean groundwater flow. The fraction of humic colloid-borne species increases with increasing prior contact time and also with decreasing migration time. The migration behavior was attributed to a kinetically controlled association/dissociation of U onto and from humic colloids and also a subsequent sorption of U onto the sediment surface. The column experiments provide an insight into humic colloid-mediated U migration in subsurface aquifers.     

Analysis of colloid and tracer breakthrough curves

We consider the dispersion and elution of colloids and dissolved nonsorbing tracers within saturated heterogeneous porous media. Since flow path geometry in natural systems is often ill-characterized macroscopic (mean) flow rates and dispersion tensors are utilized in order to account for the sub-model scale microscopic fluctuations in media structure (and the consequent hydrodynamic profile). Even for tracer migration and dispersal this issue is far from settled.Here we consider how colloid and tracer migration phenomena can be treated consistently. Theoretical calculations for model flow geometries yield two quantitative predictions for the transport of free (not yet captured) colloids with reference to a non-sorbing dissolved tracer within the same medium: the average migration velocity of the free colloids is higher than that of the tracer; and that the ratio of the equivalent hydrodynamic dispersion rates of colloids and tracer is dependent only upon properties of the colloids and the porous medium, it is independent of pathlengths and fluid flux, once length scales are large enough.The first of these is well known, since even in simple flow paths free colloids must stay more centre stream. The second, if validated suggests how solute and colloid dispersion may be dealt with consistently in macroscopic migration models. This is crucial since dispersion is usually ill-characterized and unaddressed by the experimental literature. In this paper we present evidence based upon an existing Drigg field injection test for the validity of these predictions.We show that starting from experimental data the fitted dispersion rates of both colloids and non-sorbing tracers increase with the measured elution rates (obeying slightly different rules for tracers and colloids); and that the ratio of colloid and nonsorbing tracer elution rates, and the ratio of colloid and nonsorbing tracer dispersion rates may be dependent upon properties of the colloids and the medium (not the flow regime).It is important to realize that even for unretarded species, an earlier peak in the breakthrough curve does not necessarily correspond to a faster mean elution rate, or vice versa. But rather that a colloid may elute faster but disperse less than an equivalent tracer. Hence its peak may be retarded compared to that of the tracer, even assuming no retardation. Hence one must consider a combination of mean elution rate and mean dispersion rate, and not rely on “peak times” to corroborate chromatographic effects. The importance of this lies in the fact that these processes are not independent and yet upscale differently. Thus realistic estimates of effective colloid dispersion rates should be upscaled in a way consistent with that adopted for tracers within the same system.     

Dry Removal of Gaseous Fluorine Pollutants

The conservation equations governing buoyant plume rise are solved for the case of non-uniform wind conditions. A power law is selected to represent the actual wind profile. Analytical solutions are presented both for uniformly stable and neutral atmospheric conditions. These solutions are shown to be of the same form as those obtained in the simpler uniform case but with the plume rise now depending explicitly on the wind speed shear. A sensitivity analysis of the effects on plume rise of typical variation in wind shear and entrainment reveals that the two quantities have an almost equal effect therefore justifying the use of the present model. To simplify computations a “uniform wind” is introduced such that when used in conjunction with Briggs' equations the results become consistent with those of the present theory.     

Field investigation into unsaturated flow and transport in a fault: model analyses

Results of a fault test performed in the unsaturated zone of Yucca Mountain, Nevada, were analyzed using a three-dimensional numerical model. The fault was explicitly represented as a discrete feature and the surrounding rock was treated as a dual-continuum (fracture-matrix) system. Model calibration against seepage and water-travel-velocity data suggests that lithophysal cavities connected to fractures can considerably enhance the effective fracture porosity and therefore retard water flow in fractures. Comparisons between simulation results and tracer concentration data also indicate that matrix diffusion is an important mechanism for solute transport in unsaturated fractured rock. We found that an increased fault-matrix and fracture-matrix interface areas were needed to match the observed tracer data, which is consistent with previous studies. The study results suggest that the current site-scale model for the unsaturated zone of Yucca Mountain may underestimate radionuclide transport time within the unsaturated zone, because an increased fracture-matrix interface area and the increased effective fracture porosity arising from lithophysal cavities are not considered in the current site-scale model.     

Preliminary 3-D site-scale studies of radioactive colloid transport in the unsaturated zone at Yucca Mountain,Nevada

The U.S. Department of Energy (DOE) is actively investigating the technical feasibility of permanent disposal of high-level nuclear waste in a repository to be situated in the unsaturated zone (UZ) at Yucca Mountain (YM), Nevada. In this study we investigate, by means of numerical simulation, the transport of radioactive colloids under ambient conditions from the potential repository horizon to the water table. The site hydrology and the effects of the spatial distribution of hydraulic and transport properties in the Yucca Mountain subsurface are considered. The study of migration and retardation of colloids accounts for the complex processes in the unsaturated zone of Yucca Mountain, and includes advection, diffusion, hydrodynamic dispersion, kinetic colloid filtration, colloid straining, and radioactive decay. The results of the study indicate that the most important factors affecting colloid transport are the subsurface geology and site hydrology, i.e., the presence of faults (they dominate and control transport), fractures (the main migration pathways), and the relative distribution of zeolitic and vitric tuffs. The transport of colloids is strongly influenced by their size (as it affects diffusion into the matrix, straining at hydrogeologic unit interfaces, and transport velocity) and by the parameters of the kinetic-filtration model used for the simulations. Arrival times at the water table decrease with an increasing colloid size because of smaller diffusion, increased straining, and higher transport velocities. The importance of diffusion as a retardation mechanism increases with a decreasing colloid size, but appears to be minimal in large colloids.     

An experimental study of flow and transport in fractured slate

A series of laboratory tracer migration experiments in a single rock fracture have been performed, and the breakthrough curves have been interpreted using mathematical modelling. Discrepancies were observed between the experimental data and the predictions made using a simple advection-dispersion model. The potential reasons for these discrepancies have been investigated by applying more complex models: one model incorporates channelling of flow within the fracture, the other couples dispersion and advection in the fracture with rock-matrix diffusion. It is concluded that chanelling of flow can adequately explain the observed spreading behaviour; rock-matrix diffusion is not a significant mechanism influencing transport in these experiments.     

Two-phase flow and transport in a single fracture-porous medium system

The prognosis for the remediation of contaminated fractured media is much worse than that for more homogeneous units. Fractures act as conduits for the flow of dense non-aqueous phase liquids (DNAPLs), while diffusion is responsible for the storage of dissolved mass in the surrounding matrix. A numerical model incorporating aqueous phase transport in a variable-aperture fracture and its surrounding matrix is developed and coupled with an existing two-phase flow model. The processes of transient two-phase flow, non-equilibrium dissolution, advective–dispersive transport in the fracture, and three-dimensional matrix diffusion are included in the model. Results from various investigations show that the DNAPL distribution is very sensitive to variations in aperture within a single fracture. Diffusion-controlled mass removal from both the matrix and from the hydraulically inaccessible zones within the fracture itself result in extremely large time frames for significant mass removal from these systems. Success in aqueous phase mass removal from the matrix is very sensitive to the effective fracture spacing. The hydraulic gradient in the fracture only affects the amount of water removed from the system, and does not greatly affect the amount of time required to remove the contaminant mass from the matrix. The ability to remove mass is somewhat sensitive to the porosity and effective matrix diffusion coefficient over the range of expected values.     

建筑物对高架点源大气污染物扩散影响的模拟研究

运用数值方法对城市中高架点源排放大气污染物的扩散规律进行了模拟研究,在计算区域内建立了三维数学模型,并将拉格朗日法描述的颗粒轨道模型耦合到风场。本研究计算了地面风速为3 m/s时的大气流场,并模拟研究了该风场条件下气体污染物的扩散和固体颗粒污染物的运动轨迹。通过分析模拟结果,给出了高架点源中排放的气体污染物的扩散区域和固体颗粒污染物运动轨迹的变化规律。     

Colloid transport in a geochemically heterogeneous porous medium: aquifer tank experiment and modeling

To examine colloid transport in geochemically heterogeneous porous media at a scale comparable to field experiments, we monitored the migration of silica-coated zirconia colloids in a two-dimensional layered porous media containing sand coated to three different extents by ferric oxyhydroxides. Transport of the colloids was measured over 1.65 m and 95 days. Colloid transport was modeled by an advection-dispersion-deposition equation incorporating geochemical heterogeneity and colloid deposition dynamics (blocking). Geochemical heterogeneity was represented as favorable (ferric oxyhydroxide-coated) and unfavorable (uncoated sand) deposition surface areas. Blocking was modeled as random sequential adsorption (RSA). Release of deposited colloids was negligible. The time to colloid breakthrough after the onset of blocking increased with increasing ferric oxyhydroxide-coated surface area. As the ferric oxyhydroxide surface area increased, the concentration of colloids in the breakthrough decreased. Model-fits to the experimental data were made by inverse solutions to determine the fraction of surface area favorable for deposition and the deposition rate coefficients for the favorable (ferric oxyhydroxide-coated) and unfavorable sites. The favorable deposition rate coefficient was also calculated by colloid filtration theory. The model described the time to colloid breakthrough and the blocking effect reasonably well and estimated the favorable surface area fraction very well for the two layers with more than 1% ferric oxyhydroxide coating. If mica edges in the uncoated sand were considered as favorable surface area in addition to the ferric oxyhydroxide coatings, the model predicted the favorable surface area fraction accurately for the layer with less than 1% ferric oxyhydroxide coating.     

Probabilistic study of well capture zones distribution at the Lauswiesen field site

The delineation of well capture zones is of utmost environmental and engineering relevance as pumping wells are commonly used both for drinking water supply needs, where protection zones have to be defined, and for investigation and remediation of contaminated aquifers. We analyze the probabilistic nature of well capture zones within the well field located at the "Lauswiesen" experimental site. The test site is part of an alluvial heterogeneous aquifer located in the Neckar river valley, close to the city of Tübingen in South-West Germany. We explore the effect of different conceptual models of the structure of aquifer heterogeneities on the delineation of three-dimensional probabilistic well catchment and time-related capture zones, in the presence of migration of conservative solutes. The aquifer is modeled as a three-dimensional, doubly stochastic composite medium, where distributions of geo-materials and hydraulic properties are uncertain. We study the relative importance of uncertain facies geometry and uncertain hydraulic conductivity and porosity on predictions of catchment and solute time of travel to the pumping well by focusing on cases in which (1) the facies distribution is random, but the hydraulic properties of each material are fixed, and (2) both facies geometry and material properties vary stochastically. The problem is tackled within a conditional numerical Monte Carlo framework. Results are provided in terms of probabilistic demarcations of the three-dimensional well catchment and time-related capture zones. Our findings suggest that the uncertainty associated with the prediction of the location of the outer boundary of well catchment at the "Lauswiesen" site is significantly affected by the conceptual model adopted to incorporate the heterogeneous nature of the aquifer domain in a predictive framework. Taking into account randomness of both lithofacies distribution and materials hydraulic conductivity allows recognizing the existence of preferential flow paths that influence the extent of the well catchment and the solute travel time distribution at the site.     

Linking a one-dimensional pesticide fate model to a three-dimensional groundwater model to simulate pollution risks of shallow and deep groundwater underlying fractured till

The one-dimensional pesticide fate model MACRO was loose-linked to the three-dimensional discrete fracture/matrix diffusion model FRAC3DVS to describe transport of the pesticide mecoprop in a fractured moraine till and local sand aquifer (5-5.5 m depth) overlying a regional limestone aquifer (16 m depth) at Havdrup, Denmark. Alternative approaches to describe the upper boundary in the groundwater model were examined. Field-scale simulations were run to compare a uniform upper boundary condition with a spatially variable upper boundary derived from Monte-Carlo simulations with MACRO. Plot-scale simulations were run to investigate the influence of the temporal resolution of the upper boundary conditions for fluxes in the groundwater model and the effects of different assumptions concerning the macropore/fracture connectivity between the two models. The influence of within-field variability of leaching on simulated mecoprop concentrations in the local aquifer was relatively small. A fully transient simulation with FRAC3DVS gave 20 times larger leaching to the regional aquifer compared to the case with steady-state water flow, assuming full connectivity with respect to macropores/fractures across the boundary between the two models. For fully transient simulations 'disconnecting' the macropores/fractures at the interface between the two models reduced leaching by a factor 24. A fully connected, transient simulation with FRAC3DVS, with spatially uniform upper boundary fluxes derived from a MACRO simulation with 'effective' parameters is therefore recommended for assessing leaching risks to the regional aquifer, at this, and similar sites.