Removal of Cr(VI) onto Ficus carica biosorbent from water

The utilization of sustainable and biodegradable lignocellulosic fiber to detoxify the noxious Cr(VI) from wastewater is considered a versatile approach to clean up a contaminated aquatic environment. The aim of the present research is to assess the proficiency and mechanism of biosorption on Ficus carica bast fiber via isotherm models (Langmuir, Freundlich, Temkin, Harkin’s–Jura, and Dubinin–Radushkevich), kinetic models, and thermodynamic parameters. The biomass extracted from fig plant was characterized by scanning electron microscopy and Fourier-transform infrared spectroscopy. To optimize the maximum removal efficiency, different parameters like effect of initial concentration, effect of temperature, pH, and contact time were studied by batch method. The equilibrium data were best represented by the Langmuir isotherm model, and the maximum adsorption capacity of Cr(VI) onto biosorbent was found to be 19.68 mg/g. The pseudo-second-order kinetic model adequately described the kinetic data. The calculated values of thermodynamic parameters such as enthalpy change (?H ⁰), entropy change (?S ⁰), and free energy change (?G ⁰) were 21.55 kJ/mol, 76.24 J/mol?K, and ?1.55 kJ/mol, respectively, at 30 °C which accounted for spontaneous and endothermic processes. The study of adsorbent capacity for Cr(VI) removal in the presence of Na⁺, Mg²⁺, Ca²⁺, SO ₄ ^2? , HCO ₃ ^? and Cl^? illustrated that the removal of Cr(VI) increased in the presence of HCO^3? ions; the presence of Na⁺, SO ₄ ^2? or Cl^? showed no significant influence on Cr(VI) adsorption, while Ca²⁺ and Mg²⁺ ions led to an insignificant decrease in Cr(VI) adsorption. Further, the desorption studies illustrated that 31.10 % of metal ions can be removed from an aqueous system, out of which 26.63 % of metal ions can be recovered by desorption in first cycle and the adsorbent can be reused. The results of the scale-up study show that the ecofriendly detoxification of Cr(VI) from aqueous systems was technologically feasible.     

Ionic composition of PM2.5 at urban sites of northern Greece: secondary inorganic aerosol formation

This study investigates the water-soluble ionic constituents (Na⁺, K⁺, NH₄ ⁺, Ca²⁺, Mg²⁺, Cl^?, NO₃ ^?, SO₄ ^2?) associated to PM_2.5 particle fraction at two urban sites in the city of Thessaloniki, northern Greece, an urban traffic site (UT) and urban background site (UB). Ionic constituents represent a significant fraction of PM_2.5 mass (29.6 at UT and 41.5 % at UB). The contribution of marine aerosol was low (<1.5 %). Secondary inorganic aerosols (SIA) represent a significant fraction of PM_2.5 mass contributing to 26.9?±?12.4 % and 39.2?±?13.2 % at UT and UB sites, respectively. Nitrate and sulfate are fully neutralized by ammonium under the existing conditions. The ionic constituents were evaluated in relation to their spatial and temporal variation, their gaseous precursors, meteorological conditions, local and long-range transport.     

Biosorption and degradation of decabromodiphenyl ether by <Emphasis Type="Italic">Brevibacillus brevis</Emphasis> and the influence of decabromodiphenyl ether on cellular metabolic responses

There is global concern about the effects of decabromodiphenyl ether (BDE209) on environmental and public health. The molecular properties, biosorption, degradation, accumulation, and cellular metabolic effects of BDE209 were investigated in this study to identify the mechanisms involved in the aerobic biodegradation of BDE209. BDE209 is initially absorbed by wall teichoic acid and N-acetylglucosamine side chains in peptidoglycan, and then, BDE209 is transported and debrominated through three pathways, giving tri-, hepta-, octa-, and nona-bromodiphenyl ethers. The C–C bond energies decrease as the number of bromine atoms on the diphenyl decreases. Polybrominated diphenyl ethers (PBDEs) inhibit protein expression or accelerate protein degradation and increase membrane permeability and the release of Cl^?, Na⁺, NH₄ ⁺, arabinose, proteins, acetic acid, and oxalic acid. However, PBDEs increase the amounts of K⁺, Mg²⁺, PO₄ ^3?, SO₄ ^2?, and NO₃ ^? assimilated. The biosorption, degradation, accumulation, and removal efficiencies when Brevibacillus brevis (1 g L^?1) was exposed to BDE209 (0.5 mg L^?1) for 7 days were 7.4, 69.5, 16.3, and 94.6 %, respectively.     

Remediation of acid mine drainage (AMD)-contaminated soil by Phragmites australis and rhizosphere bacteria

Experiments were conducted to assess the impact of citric acid (CA) and rhizosphere bacteria on metal uptake in Phragmites australis cultured in a spiked acid mine drainage (AMD) soil. Rhizosphere iron-oxidizing bacteria (Fe(II)OB) enhanced the formation of Fe plaque on roots, which decreased the uptake of Fe and Mn. CA inhibited the growth of Fe(II)OB, decreased the formation of metal plaque, raised the metal mobility in soil, and increased the accumulation of metals in all tissues of the reeds. The higher the CA dosage, the more metals accumulated into reeds. The total amount of metals in reeds increased from 7.8?±?0.5?×?10^?6 mol plant^?1 (Mn), 1.4?±?0.1?×?10^?3 mol plant^?1 (Fe), and 1.0?±?0.1?×?10^?4 mol plant^?1 (Al) in spiked soil without CA to 22.2?±?0.5?×?10^?6 mol plant^?1 (Mn), 3.5?±?0.06?×?10^?3 mol plant^?1 (Fe), and 5.0?±?0.2?×?10^?4 mol plant^?1 (Al) in soil added with 33.616 g C₆H₈O₇·H₂O for per kilogram soil. CA could be effective at enhancing the phytoremediation of metals from AMD-contaminated soil.     

Current and future emission estimates of exhaust gases and particles from shipping at the largest port in Korea

The emissions of exhaust gases (NO _x , SO₂, VOCs, and CO₂) and particles (e.g., PM) from ships traversing Busan Port in Korea were estimated over three different years (the years 2006, 2008, and 2009). This analysis was performed according to the ship operational modes (“at sea,” “maneuvering,” and “in port”) and ship types based on an activity-based method. The ship emissions for current (base year 2009) and future scenarios (years 2020 and 2050) were also compared. The annual emissions of SO₂, VOCs, PM, and CO₂ were highest (9.6?×?10³, 374, 1.2?×?10³, and 5.6?×?10⁵ ton year^?1, respectively) in 2008. In contrast, the annual NO _x emissions were highest (11.7?×?10³ ton year^?1) in 2006 due mainly to the high NO _x emission factor. The emissions of air pollutants for each ship operational mode differed considerably, with the largest emission observed in “in port” mode. In addition, the largest fraction (approximately 45–67 %) of the emissions of all air pollutants during the study period was emitted from container ships. The future ship emissions of most pollutants (except for SO₂ and PM) in 2020 and 2050 are estimated to be 1.4–1.8 and 4.7–6.1 times higher than those in 2009 (base year), respectively.     

Determination of sources of fine particles in different ambient atmospheres in South Korea using a chemical mass balance model

Abstract

To determine the sources of particulate matter less than 2.5?μm (PM_2.5 in different ambient atmospheres (urban, roadside, industrial, and rural sites), the chemical components of PM_2.5 such as ions (Cl^-, NO₃^-, SO₄^2-, NH₄⁺, Na⁺, K⁺, Ca²⁺, and Mg²⁺), carbonaceous species, and elements (Al, As, Ba, Cd, Cu, Fe, Mn, Ni, Pb, Se, V, and Zn) were measured. The average mass concentrations of PM_2.5 at the urban, roadside, industrial, and rural sites were 31.5?±?14.8, 31.6?±?22.3, 31.4?±?16.0, and 25.8?±?12.4?μg/m³, respectively. Except for secondary ammonium sulfate and ammonium nitrate, the model results showed that the traffic source (i.e., the sum of gasoline and diesel vehicle sources) was the most dominant source of PM_2.5 (17.1%) followed by biomass burning (13.8%) at the urban site. The major primary sources of PM_2.5 were consistent with the site characteristics (diesel vehicle source at the roadside site, coal-fired plants at the industrial site, and biomass burning at the rural site). Seasonal data from the urban site suggested that ammonium sulfate and ammonium nitrate were the most dominant sources of PM_2.5 during all seasons. Further, the contribution of road dust source to PM_2.5 increased during spring and fall seasons. We conclude that the determination of the major PM_2.5 sources is useful for establishing efficient control strategies for PM_2.5 in different regions and seasons.     

Ionic composition of TSP and PM2.5 during dust storms and air pollution episodes at Xi'an,China

TSP and PM_2.5 samples were collected at Xi'an, China during dust storms (DSs) and several types of pollution events, including haze, biomass burning, and firework displays. Aerosol mass concentrations were up to 2 times higher during the particulate matter (PM) events than on normal days (NDs), and all types of PM led to decreased visibility. Water-soluble ions (Na⁺, NH₄⁺, K⁺, Mg²⁺, Ca²⁺, F^?, Cl^?, NO₃^?, and SO₄^2?). were major aerosol components during the pollution episodes, but their concentrations were lower during DSs. NH₄⁺, K⁺, F^?, Cl^?, NO₃^?, and SO₄^2? were more abundant in PM_2.5 than TSP but the opposite was true for Mg²⁺ and Ca²⁺. PM collected on hazy days was enriched with secondary species (NH₄⁺, NO₃^?, and SO₄²) while PM from straw combustion showed high K⁺ and Cl^?. Firework displays caused increases in K⁺ and also enrichments of NO₃^? relative to SO₄^2?. During DSs, the concentrations of secondary aerosol components were low, but Ca²⁺ was abundant. Ion balance calculations indicate that PM from haze and straw combustion was acidic while the DSs samples were alkaline and the fireworks' PM was close to neutral. Ion ratios (SO₄^2?/K⁺, NO₃^?/SO₄^2?, and Cl^?/K⁺) proved effective as indicators for different pollution episodes.     

Kinetics and equilibrium properties of the biosorption of Cu2+ by algae

The purpose of this study was to examine the kinetics and equilibrium properties of freshwater algae with Cu²⁺. This was a model system to explore using algae as biosensors for water quality. Methods included making luminescence measurements (fluorescence) and copper ion-selective electrode (CuISE) measurements vs. time to obtain kinetic data. Results were analyzed using a pseudo-first-order model to calculate the rate constants of Cu²⁺ uptake by algae: k _p(Cu?Calgae)?=?0.0025?±?0.0006?s^?1 by CuISE and k _p(Cu?Calgae)?=?0.0034?±?0.0011?s^?1 by luminescence. The binding constant of Cu?Calgae, K _Cu?Calgae, was 1.62?±?0.07?×?10⁷?M^?1. Fluorescence results analyzed using the Stern?CVolmer relationship indicate that algae have two types of binding sites of which only one appears to affect quenching. The fluorescence-based method was found to be able to detect the reaction of algae with Cu²⁺ quickly and at a detection limit of 0.1?mg?L^?1.     

The use of artificial neural network (ANN) for the prediction and simulation of oil degradation in wastewater by AOP

The application of advanced oxidation process (AOP) in the treatment of wastewater contaminated with oil was investigated in this study. The AOP investigated is the homogeneous photo-Fenton (UV/H₂O₂/Fe⁺²) process. The reaction is influenced by the input concentration of hydrogen peroxide H₂O₂, amount of the iron catalyst Fe⁺², pH, temperature, irradiation time, and concentration of oil in the wastewater. The removal efficiency for the used system at the optimal operational parameters (H₂O₂?=?400 mg/L, Fe⁺²?=?40 mg/L, pH?=?3, irradiation time?=?150 min, and temperature?=?30 °C) for 1,000 mg/L oil load was found to be 72 %. The study examined the implementation of artificial neural network (ANN) for the prediction and simulation of oil degradation in aqueous solution by photo-Fenton process. The multilayered feed-forward networks were trained by using a backpropagation algorithm; a three-layer network with 22 neurons in the hidden layer gave optimal results. The results show that the ANN model can predict the experimental results with high correlation coefficient (R ²?=?0.9949). The sensitivity analysis showed that all studied variables (H₂O₂, Fe⁺², pH, irradiation time, temperature, and oil concentration) have strong effect on the oil degradation. The pH was found to be the most influential parameter with relative importance of 20.6 %.     

Plot-scale spatiotemporal variations of CO2 concentration and flux across water–air interfaces at aquaculture shrimp ponds in a subtropical estuary

Human activities have increased anthropogenic CO₂ emissions, which are believed to play important roles in global warming. The spatiotemporal variations of CO₂ concentration and flux at fine spatial scales in aquaculture ponds remain unclear, particularly in China, the country with the largest aquaculture. In this study, the plot-scale spatiotemporal variations of water CO₂ concentration and flux, both within and among ponds, were researched in shrimp ponds in Shanyutan Wetland, Min River Estuary, Southeast China. The average water CO₂ concentration and flux across the water–air interface in the shrimp ponds over the shrimp farming period varied from 22.79?±?0.54 to 186.66?±?8.71 μmol L^?1 and from ??0.50?±?0.04 to 2.87?±?0.78 mol m^?2 day^?1, respectively. There was no remarkable difference in CO₂ concentration and flux within the ponds, but significantly spatiotemporal differences in CO₂ flux were observed between shrimp ponds. Chlorophyll a, pH, salinity, air temperature, and morphometry were the important factors driving the spatiotemporal patterns of CO₂ flux in the shrimp ponds. Our findings highlighted the importance and spatiotemporal variations of CO₂ flux in the important coastal ecosystems.

     

Decadal changes in atmospheric CO2 concentration and δ13C over two seas and two oceans: Italy to New Zealand

Continuous measurements of the CO₂ concentration were repeatedly carried out from 1996 to 2007 between Italy and New Zealand by means of a Siemens Ultramat 5E analyzer assembled for shipboard use. Along the ship routes discrete air samples were collected from 1998 to 2005 using four-litre Pyrex flasks. The δ¹³C of the CO₂ from the flask air samples was measured according to well-established techniques. The decadal changes of these two variables can now be evaluated from these results. Large variations of the CO₂ concentration were normally recorded in the Mediterranean and the Red Sea. Completely different trends of the CO₂ concentration were observed in the Red Sea (30° N to about 13° N) between 2007 (a marked southward decrease) and 2005 and 2003 when a marked southward increase is apparent, at least between 23° and 13° N. A further difference among different expeditions is related to the decrease or increase of the CO₂ concentration in the Gulf of Aden. The backward trajectories of the air masses help to explain, at least partially, these differences. In the Indian Ocean and Southern Ocean a decrease of a few ppmv of the CO₂ concentration takes place from Cape Guardafui (Northern Somaliland) to southern New Zealand, particularly during 2005 and 2007. The yearly rate of increase of the CO₂ concentration between 1996 and 2007 for the Indian Ocean is of about 1.9 ppmv yr^?1, in excellent agreement with the NOAA/CMDL measurements carried out during the same period at Mahé Isld. (Indian Ocean) and Cape Grim (Tasmania). The δ¹³C results obtained from the CO₂ of flask samples collected in the Mediterranean show the effect of anthropogenic emissions, though this is considerably smaller than expected. This inconsistency may be related to the large terrestrial biospheric sink of CO₂ in the Northern Hemisphere. The results obtained from the Red Sea are quite variable through time and space, particularly in its southern section; their interpretation is not easy. The Indian Ocean and the Southern Ocean show rather homogeneous δ¹³C results even though a variable carbon isotope shift can be calculated from period/cruise to period/cruise. In the case of the Indian Ocean the mean δ¹³C value from the flask air samples collected in 2005 is ?8.29‰ and the calculated rate of the carbon isotope shift between 1998 and 2005 is ?0.034‰ yr^?1, considerably larger than that calculated at the closest NOAA station (Mahé Isld.) of ?0.026‰ yr^?1. This discrepancy may be, at least partially, caused by the small number of measurements carried out at sea. However, the atmosphere over the Indian Ocean is less affected by anthropogenic emissions than in other areas.     

Influence of meteorological factors and polluting environment on rain chemistry and wet deposition in a rural area near Chimay,Belgium

This paper focuses on a detailed analysis of the effects of meteorological factors explaining the variability of rain composition.Inorganic composition of 113 individual rain events was measured from May 2002 to October 2005 at a rural site near Chimay, in the western part of the Belgian Ardennes. Original models were fitted for each studied ion (H⁺, Mg²⁺, Ca²⁺, K⁺, NH₄⁺, Na⁺, Cl⁻, NO₃⁻ and SO₄²⁻) to relate rain event concentration or wet deposition to the rainfall volume (R), the length of the antecedent dry period (ADP), the volume of the previous event (R_prev) as well as to the mean wind speed and the prevailing wind direction during both the dry and the rainy periods. These variables explained from 32% (H⁺) to 69% (NO₃⁻) of rain concentration variability. Concentrations decreased logarithmically with increasing R values except in case of H⁺ for which a positive effect of rain volume on rain concentration was observed. ADP affected positively rain concentrations of all ions excluding K⁺ and H⁺ for which, respectively, a nonsignificant and a negative effect of this variable was observed. Increasing R_prev strengthened the effect of the variable R on H⁺, Mg²⁺, Ca²⁺, Na⁺, NH₄⁺ and SO₄²⁻ concentrations while it softened the effect of ADP on NO₃⁻ concentrations. Wind speed and direction during dry and rainy periods explained together from 8% (K⁺) to 38% (Na⁺) of rain concentration total variability. R² coefficients of the wet deposition models ranged from 0.51 (K⁺) to 0.79 (SO₄²⁻). For all ions, wet deposition increased significantly with increasing R values while the effects of the other variables were similar to those on concentrations. Wind conditions during dry and rainy periods explained from 4% (H⁺) to 24% (Na⁺) of wet deposition total variability. On an annual scale, the total dry period duration, the total rainfall volume as well as the shape of the distributions of the length of the antecedent dry periods and of the rain event volume are important parameters that influence annual wet deposition.     

Pilot project at Hazira,India, for capture of carbon dioxide and its biofixation using microalgae

The objective of the present study was to set up a small-scale pilot reactor at ONGC Hazira, Surat, for capturing CO₂ from vent gas. The studies were carried out for CO₂ capture by either using microalgae Chlorella sp. or a consortium of microalgae (Scenedesmus quadricauda, Chlorella vulgaris and Chlorococcum humicola). The biomass harvested was used for anaerobic digestion to produce biogas. The carbonation column was able to decrease the average 34 vol.% of CO₂ in vent gas to 15 vol.% of CO₂ in the outlet gas of the carbonation column. The yield of Chlorella sp. was found to be 18 g/m²/day. The methane yield was 386 l CH₄/kg VS_fed of Chlorella sp. whereas 228 l CH₄/kg VS_fed of the consortium of algae.     

Investigation of uranium binding forms in selected German mineral waters

Cryogenic time-resolved laser-induced fluorescence spectroscopy was successfully used to identify uranium binding forms in selected German mineral waters of extremely low uranium concentrations (<2.0 μg/L). The measurements were performed at a low temperature of 153 K. The spectroscopic data showed a prevalence of aquatic species Ca₂UO₂(CO₃)₃ in all investigated waters, while other uranyl–carbonate complexes, viz, UO₂CO_3(aq) and UO₂(CO₃)₂ ^2?, only existed as minor species. The pH value, alkalinity (CO₃ ^2?), and the main water inorganic constituents, specifically the Ca²⁺ concentration, showed a clear influence on uranium speciation. Speciation modeling was performed using the most recent thermodynamic data for aqueous complexes of uranium. The modeling results for the main uranium binding form in the investigated waters indicated a good agreement with the spectroscopy measurements.     

Characterization of major pollution events (dust, haze, and two festival events) at Agra, India

Total suspended particulate (TSP) samples were collected during dust, haze, and two festival events (Holi and Diwali) from February 2009 to June 2010. Pollutant gases (NO₂, SO₂, and O₃) along with the meteorological parameters were also measured during the four pollution events at Agra. The concentration of pollutant gases decreases during dust events (DEs), but the levels of the gases increase during other pollution events indicating the impact of anthropogenic emissions. The mass concentrations were about two times higher during pollution events than normal days (NDs). High TSP concentrations during Holi and Diwali events may be attributed to anthropogenic activities while increased combustion sources in addition to stagnant meteorological conditions contributed to high TSP mass during haze events. On the other hand, long-range transport of atmospheric particles plays a major role during DEs. In the dust samples, Ca²⁺, Cl^?, NO₃ ^?, and SO₄ ^2? were the most abundant ions and Ca²⁺ alone accounted for 22 % of the total ionic mass, while during haze event, the concentrations of secondary aerosols species, viz., NO₃ ^?, SO₄ ^2?, and NH₄ ⁺, were 3.6, 3.3, and 5.1 times higher than the normal days. During Diwali, SO₄ ^2? concentration (17.8 μg?m^?3) was highest followed by NO₃ ^?, K⁺, and Cl^? while the Holi samples were strongly enriched with Cl^? and K⁺ which together made up 32.7 % of the total water-soluble ions. The ion balances indicate that the haze samples were acidic. On the other hand, Holi, Diwali, and DE samples were enriched with cations. The carbonaceous aerosol shows strong variation with the highest concentration during Holi followed by haze, Diwali, DEs, and NDs. However, the secondary organic carbon concentration follows the order haze > DEs > Diwali > Holi > NDs. The scanning electron microscope/EDX results indicate that KCl and carbon-rich particles were more dominant during Holi and haze events while DE samples were enriched with particles of crustal origin.     

An alkaline phosphatase from Bacillus amyloliquefaciens YP6 of new application in biodegradation of five broad-spectrum organophosphorus pesticides

In recent decades, biodegradation has been considered a promising and eco-friendly way to eliminate organophosphorus pesticides (OPs) from the environment. To enrich current biodegrading-enzyme resources, an alkaline phosphatase (AP3) from Bacillus amyloliquefaciens YP6 was characterized and utilized to test the potential for new applications in the biodegradation of five broad-spectrum OPs. Characterization of AP3 demonstrated that activity was optimal at 40?°C and pH 10.3. The activity of AP3 was enhanced by Mg²⁺, Ca²⁺, and Cu²⁺, and strongly inhibited by Mn²⁺, EDTA, and L-Cys. Compared to disodium phenyl phosphate, p-nitrophenyl phosphate (pNPP) was more suitable to AP3, and the V_m, K_m, k_cat, k_cat/K_m values of AP3 for pNPP were 4,033?U mg^?1, 12.2?mmol L^?1, 3.3?×?10⁶ s^?1, and 2.7?×?10⁸ s^?1mol^?1L, respectively. Degradation of the five OPs, which included chlorpyrifos, dichlorvos, dipterex, phoxim, and triazophos, was 18.7%, 53.0%, 5.5%, 68.3%, and 96.3%, respectively, after treatment with AP3 for 1?h. After treatment of the OP for 8?h, AP3 activities remained more than 80%, with the exception of phoxim. It can be postulated that AP3 may have a broad OP-degradation ability and could possibly provide excellent potential for biodegradation and bioremediation in polluted ecosystems.     

Deposition processes of ionic constituents to snow cover

Atmospheric deposition is an important removal process of aerosol particles and gases from the atmosphere. To elucidate the relative contributions of wet and dry processes and in-cloud and below-cloud scavenging based on deposition amounts in winter at Mt. Tateyama, central Japan, we obtained daily samples (December, 2006–March, 2007) of size-segregated aerosol particles and precipitation at Senjyugahara (SJ; 475 m a.s.l.) and vertical samples of spring snow cover at Murododaira (MR, 2450 m a.s.l., 13 km distance from SJ) on the western flank of Mt. Tateyama. The NH₄⁺ and nssSO₄^2? in aerosols were mostly found in the fine fraction (<2 μm), although Na⁺, NO₃^?, and nssCa²⁺ were mainly detected in the coarse fraction (>2 μm). Average ionic concentrations (μg g^?1) in precipitation at SJ were higher about 3.8 for Na⁺ and nssCa²⁺, 3.4 for NO₃^?, 3.7 for NH₄⁺, 2.5 for nssSO₄^2? than those at MR, whereas cumulative precipitation amounts at SJ and MR were, respectively, 84 and 175 cm of water equivalent. Wet and dry deposition amounts during the study period were estimated for sites using size-segregated aerosol data, winter averages of HNO₃, NH₃, and SO₂ concentrations, and dry deposition velocities. Particle-dry deposition comprised about 3% (Na⁺) to 11% (NH₄⁺) of the total deposition at MR. The maximum amounts of gas dry deposition were estimated, respectively, as 4, 13, and 3% of the total deposition at MR for NH₄⁺, NO₃^?, and nssSO₄^2?. The relative contributions of below-cloud scavenging (BCS) between MR and SJ were estimated as considering the wet only deposition amount at MR. Higher contributions of BCS were obtained for Na⁺ (56%) and nssCa²⁺ (45%), whereas BCSs for NH₄⁺, NO₃^?, and nssSO₄^2? were lower than 28%. Ionic constituents existing predominantly in the coarse fraction showed a large contribution of BCS.     

Carbon dioxide and methane fluxes in the littoral zones of two lakes,east Antarctica

During the summertime of 2007/2008, carbon dioxide (CO₂) and methane (CH₄) fluxes across air–water interface were investigated in the littoral zones of Lake Mochou and Lake Tuanjie, east Antarctica, using a static chamber technique. The mean fluxes of CO₂ and CH₄ were ?70.8 mgCO₂ m^?2 h^?1 and 144.6 μgCH₄ m^?2 h^?1, respectively, in the littoral zone of Lake Mochou; The mean fluxes were ?36.9 mgCO₂ m^?2 h^?1 and 109.8 μgCH₄ m^?2 h^?1, respectively, in the littoral zone of Lake Tuanjie. Their fluxes showed large temporal and spatial dynamics. The CO₂ fluxes showed a significantly negative correlation with daily total radiation (DTR) and a weakly negative correlation with air temperature and water temperature, indicating that sunlight intensity controlled the magnitude of CO₂ fluxes from the open lakes. The CH₄ fluxes significantly correlated with local air temperature, water table and total dissolved solids (TDS), indicating that they were the predominant factors influencing CH₄ fluxes. Summertime CO₂ budgets in the littoral zones of Lake Mochou and Lake Tuanjie were estimated to be ?152.9 gCO₂ m^?2 and ?79.7 gCO₂ m^?2, respectively, and net CH₄ emissions were estimated to be 312.3 mgCH₄ m^?2 and 237.2 mgCH₄ m^?2, respectively. Our results show that shallow, open, alga-rich lakes might be strong summertime CO₂ absorbers and small CH₄ emitters during the open water in coastal Antarctica.     

Linkage between community diversity of sulfate-reducing microorganisms and methylmercury concentration in paddy soil

Sulfate-reducing microorganisms (SRM) have been thought to play a key role in mercury (Hg) methylation in anoxic environments. The current study examined the linkage between SRM abundance and diversity and contents of methylmercury (MeHg) in paddy soils collected from a historical Hg mining area in China. Soil profile samples were collected from four sites over a distance gradient downstream the Hg mining operation. Results showed that MeHg content in the soil of each site significantly decreased with the extending distance away from Hg mine. Soil MeHg content was correlated positively with abundance of SRM and the contents of organic matter (OM), NH₄ ⁺, SO₄ ^2?, and Hg. The abundances of SRM based on dissimilatory (bi) sulfite reductase (dsrAB) gene at 0–40 cm depths were higher than those at 40–80 cm depth at all sites. The SRM community composition varied in the soils of different sampling sites following terminal restriction fragment length polymorphism (T-RFLP) and phylogenetic analyses, which appeared to be correlated with contents of MeHg, OM, NH₄ ⁺, and SO₄ ^2? through canonical correspondence analysis. The dominant groups of SRM in the soils examined belonged to Deltaproteobacteria and some unknown SRM clusters that could have potential for Hg methylation. These results advance our understanding of the relationship between SRM and methylmercury concentration in paddy soil.     

The impact of CO2 capture in the power and heat sector on the emission of SO2, NOx,particulate matter,volatile organic compounds and NH3 in the European Union

This study quantifies the trade-offs and synergies between climate and air quality policy objectives for the European power and heat (P&H) sector. An overview is presented of the expected performance data of CO₂ capture systems implemented at P&H plants, and the expected emission of key air pollutants, being: SO₂, NO_X, NH₃, volatile organic compounds (VOCs) and particulate matter (PM). The CO₂ capture systems investigated include: post-combustion, oxyfuel combustion and pre-combustion capture.For all capture systems it was found that SO₂, NO_x and PM emissions are expected to be reduced or remain equal per unit of primary energy input compared to power plants without CO₂ capture. Increase in primary energy input as a result of the energy penalty for CO₂ capture may for some technologies and substances result in a net increase of emissions per kWh output. The emission of ammonia may increase by a factor of up to 45 per unit of primary energy input for post-combustion technologies. No data are available about the emission of VOCs from CO₂ capture technologies.A simple model was developed and applied to analyse the impact of CO₂ capture in the European P&H sector on the emission level of key air pollutants in 2030. Four scenarios were developed: one without CO₂ capture and three with one dominantly implemented CO₂ capture system, varying between: post-combustion, oxyfuel combustion and pre-combustion.The results showed a reduction in GHG emissions for the scenarios with CO₂ capture compared to the baseline scenario between 12% and 20% in the EU 27 region in 2030. NO_x emissions were 15% higher in the P&H sector in a scenario with predominantly post-combustion and lower when oxyfuel combustion (?16%) or pre-combustion (?20%) were implemented on a large scale. Large scale implementation of the post-combustion technology in 2030 may also result in significantly higher, i.e. increase by a factor of 28, NH₃ emissions compared to scenarios with other CO₂ capture options or without capture. SO₂ emissions were very low for all scenarios that include large scale implementation of CO₂ capture in 2030, i.e. a reduction varying between 27% and 41%. Particulate Matter emissions were found to be lower in the scenarios with CO₂ capture. The scenario with implementation of the oxyfuel technology showed the lowest PM emissions followed by the scenario with a significant share allocated to pre-combustion, respectively ?59% and ?31%. The scenario with post-combustion capture resulted in PM emissions varying between 35% reduction and 26% increase.