Ecofriendly lime and sulfide free enzymatic dehairing of skins and hides using a bacterial alkaline protease

The ever-increasing attention to the environmental impact of leather industry has necessitated the development of enzyme-based processes as potent alternatives to pollution causing chemicals. In this study, a hair saving process is developed for dehairing of skins and hides using a bacterial alkaline protease preparation, completely eliminating the use of lime and sulfide. To evaluate the efficacy of the enzymatic process, comparative studies have been carried out with two controls; a conventional lime-sulfide process and enzyme-assisted process using commercial dehairing enzyme with reduced quantities of lime and sulfide. The developed process requires a shorter duration of 6h for complete dehairing of skins and hides than control groups and also, it avoids the use of silicate carriers since the enzymatic dehairing is carried out by dip method. Histological and scanning electron microscopic analyses of the dehaired pelts obtained from enzymatic process reveal complete removal of hair and epidermis with moderate opening up of fiber structure in both dermis and corium. Moreover, the collagen is not damaged and resulting in a leather of good quality. The developed process has resulted in a remarkable reduction of effluent load in terms of biochemical oxygen demand, chemical oxygen demand, total dissolved solids and total suspended solids. Physicochemical studies conclusively show that the leathers produced by enzymatic process are equivalent to or better than that obtained by control systems. Thus, the developed enzymatic process offers immense potential for greener mode of dehairing of skins and hides in leather industry coupled with environmental excellence.     

Mechanism of enzymatic dehairing of skins using a bacterial alkaline protease

In the conventional dehairing process of leather manufacture, animal skins are subjected to a drastic chemical treatment using lime and sodium sulfide. Sulfide reduces disulfide bonds in keratin present in hair and epidermis and thereby detaches them from skin. Lime, being an alkali, contributes to opening up of collagen fiber structure by cleaving a major portion of the glycosaminoglycans from proteoglycans, the interfibrillar elements of skin connective tissue. Currently, as an alternative to chemical dehairing, enzyme based dehairing processes using proteases avoiding the use of lime and sulfide are being developed because of their environmental benefits. Though both chemical as well as enzymatic dehairing processes are aimed at removing noncollagenous proteins and proteoglycans in addition to fiber opening, the mechanism of enzymatic process is distinct from that of the chemical process. In this study, we attempt to study in detail the mechanism of hair saving enzymatic dehairing process for skins using a bacterial protease against the customary hair burn chemical dehairing process. Quantitative analysis shows that the collagen content remains unaffected in both treatments but there is a marked reduction of proteoglycan constituents from dehaired pelts in the enzymatic process when compared to lime-sulfide process. This is further substantiated by histochemical examination of the sections of dehaired pelts using different stains as well as immunohistochemical studies on the removal of decorin. HPLC profile shows that decorin is extensively degraded by the bacterial protease. This study conclusively demonstrates that proteolytic degradation of decorin and subsequent removal of proteoglycan aggregates play an important role in the opening up of the collagen fiber bundles during enzymatic dehairing.     

Diffusion pollution from livestock and poultry rearing in the Yangtze Delta,China

BACKGROUND: The Yangtze Delta is one of the most developed regions in China and includes Shanghai, eight cities in Jiangsu province and eight cities in Zhejiang province. Meat consumption in this region has increased with economic growth, and most of the consumed meat is produced locally. The water quality of surface waters has deteriorated in recent years. An example was the huge blue-green algae bloom in Tai Lake in late May 2007, which affected millions of people's daily drinking water. However, animal husbandry is considered to be one of the main pollution sources. METHODS: Pollutants (NH3-N, total phosphorus (TP), and total nitrogen (TN)) excreted by livestock and poultry, and the resultant COD (chemical oxygen demand) and BOD (biochemical oxygen demand), were estimated using two different methods based on different data sets. RESULTS: The number of livestock and poultry has remained stable in the Yangtze Delta over the four years from 1999 to 2002, with the average number of pigs, cattle, sheep and poultry being 21.1 M, 0.4 M, 7.7 M and 597.6 M, respectively. Pollutants in livestock and poultry excreta estimated by Method I were: 0.12 Mt NH3-N, 0.11 Mt TP and 0.29 Mt TN, resulting in COD and BOD of 1.34 Mt and 1.30 Mt, respectively, while the estimations based on Method II were: 0.18 Mt NH3-N, 0.15 Mt TP and 0.40 Mt TN, resulting in COD and BOD of 1.95 Mt and 1.80 Mt, respectively. DISCUSSION: Pollutants excreted annually by livestock and poultry in the Yangtze Delta are estimated to be: 0.17 Mt NH3-N, 0.16 Mt TP and 0.42 Mt TN, giving rise to a COD of 1.86 Mt and a BOD of 1.72 Mt. Approximately 25% of this pollution was estimated to enter water bodies, which means that the annual pollutant load is 43,700 t NH3-N, 39,400 tTP, 104,600t TN with a COD of 465,000 tand a BOD of 430,100 t. Pollutants from animal husbandry were similar in magnitude to those from industrial wastewater. Pigs produced the most pollution, followed by poultry, cattle and sheep. The pollution load from animal husbandry in the Yangtze Delta is about twice the average level of the whole of China. CONCLUSIONS: Domestic wastewater was the main pollution source in the Yangtze Delta, followed by pollution from raising livestock and poultry and from industrial wastewater. The pollution load in Shanghai and Jiaxing were the greatest, followed by 7 cities of Jiangsu province (except Suzhou) and other cities of Zhejiang province and Suzhou. Pigs and poultry produced about 90% of the total pollutants from animal husbandry. RECOMMENDATIONS AND PERSPECTIVES: The local governments, especially in Shanghai and Jiaxing, should focus their attention on the pollution produced by livestock and poulrry. Controlling pollution from pigs and poultry will have the greatest impact in this region. Control of pollution will be facilitated by the development of large-scale livestock and poultry farming units and a shift away from small scale husbandry.     

人工湿地植物泌氧与污染物降解耗氧关系研究

实验采用静态水培方法研究了香蒲(Typha orientalis)、芦苇(Phragmites australis)和水葱(Scirpus validus)3种常见湿地水生植物潜在泌氧能力、去污效果,并对水生植物泌氧量与污染物降解耗氧量进行了计算分析,从而阐明湿地植物泌氧与污染物降解耗氧之间的关系。结果表明,3种植物泌氧能力由大到小依次为:芦苇香蒲水葱,其中,芦苇比放氧速率、面积泌氧率均最高,分别为3.36 mg O2/(g.d)和4.35 g O2/(m2.d)。植物对湿地系统中污染物的去除有重要影响,各植物系统COD去除速率在3.46~3.77 g/(m2.d)之间;NH4+-N去除速率在0.07~0.13 g/(m2.d);TN去除速率在0.25~0.27 g/(m2.d);TP去除速率均为0.09 g/(m2.d);均好于无植物空白系统。计算表明,各植物体系泌氧量在0.48~0.55 g O2/d之间;各植物体系COD、NH4+-N耗氧量在0.41~0.46 g O2/d之间;植物净泌氧量在0.02~0.12 g O2/d之间。植物泌氧量与COD、NH4+-N耗氧量呈显著正相关关系。若应用人工湿地处理城镇生活污水,各植物体系COD最大去除负荷在3.81~4.35 g/(m2.d)之间,NH4+-N最大去除负荷在0.83~0.95 g/(m2.d)之间,最大水力负荷在1.65~1.89 cm/d之间。     

Advanced oxidation treatment of physico-chemically pre-treated olive mill industry effluent

In this study, the applicability of physico-chemical methods was investigated for the pre-treatment of the olive mill effluents prior to the discharge into the common sewerage ending with a municipal wastewater treatment plant. The samples were taken from an olive oil industry operated as three-phase process located in Turkey. Various pre-treatment methods including acid craking, polyelectrolyte and lime additions were applied. Advanced oxidation study using Fenton's process was also investigated following pre-treatment by acid cracking and cationic polyelectrolyte. Acid cracking alone gave satisfactory treatment efficiencies and polyelectrolite additions to the acid-cracked samples enhanced treatment efficiency. Since a complete treatment plant is available at the end of the sewer system, results indicated that the effluents of the investigated industry could be discharged into the municipal sewerage in the case of total chemical oxygen demand (COD(tot)), suspended solid (SS) and volatile suspended solid (VSS) concentrations according to the Turkish Water Pollution Control Regulation after pre-treatment with 5 ppm anionic polyelectrolyte following acid cracking. The minimum COD(tot), SS and VSS removals were observed when raw wastewater was pre-treated with lime and the discharge standards to the municipal sewer system could not be met. Advanced oxidation with Fenton's process was applied after acid cracking and cationic polyelectrolyte treatment in order to investigate further reduction in chemical oxygen demand (COD) concentration for minimizing the influence of this industrial discharge on the existing municipal wastewater treatment plant. Results indicated that COD(tot) removal increased up to 89% from 74% after Fenton's oxidation for the acid cracked samples in which cationic polyelectrolite (10 ppm) was added.     

对氯气校正法测定高氯废水化学需氧量的方法研究

氯气校正法(HJ/T70-2001)是测定高氯废水化学需氧量的国标方法,为了减少样品测定过程带来的环境污染,研究在不改变HJ/T70-2001氧化体系及测试条件的情况下,将取样体积由20 mL减半为10 mL,试剂的使用量相应减半,对方法的检出限、相对误差、相对标准偏差等指标进行验证。结果表明,该方法的检出限符合要求,准确度较高,精密度较好,可用于高氯废水化学需氧量的测定。     

Decolorization and biodegradation of dye wastewaters by a facultative-aerobic process

BACKGROUND: Dye wastewater is one of the main pollution sources of water bodies in China. Conventional biological processes are relatively ineffective for color removal, the development of alternative treatment methods will become important. Our subjective was that of introducing a new biotreatment technology which combined a facultative biofilm reactor (FBR) with an aerobic reactor (AR) to treat a dye wastewater. The efficiencies of color and chemical oxygen demand (COD) removal and the mechanism of dye degradation were investigated. METHODS: The anthraquinone acid dye (acid blue BRLL) concentration, organic loading rate (OLR) and hydraulic retention time (HRT) were varied in the experiments to evaluate the treatment efficiency and process stability. The biodegradation products were detected by infrared (IR) and high performance liquid chromatography and mass spectrometry (HPLC-MS). RESULTS AND DISCUSSION: The results demonstrated that the facultative biofilm process was more effective for decolorization than the anaerobic stage of an anaerobic-aerobic process. Most color removal occurred in the facultative reaction (maximum to 88.5%) and the BOD (biochemical oxygen demand): COD of the FBR effluent increased by 82.2%, thus improving the biodegradability of dyes for further aerobic treatment. The dye concentration, OLR and HRT will be the factors affecting decolorization. Color removal efficiency falls as the influent dye concentration increases, but rises with increased HRT. The infrared and HPLC-MS analyses of the effluents of FBR and AR reveal that the dye parent compound was degraded in each reactor during the process. CONCLUSION: The Facultative-aerobic (F-A) system can effectively remove both color and COD from the dye wastewater. The FBR played an essential role in the process. The average overall color and COD in the system were removed by more than 93.9% and 97.1%, respectively, at an OLR of 1.1 kg COD m(-3) d(-1) and at the HRT of 18-20 hours in the FBR and 4-5 hours in the AR. The color removal mechanism in each reactor was not only a sort of biosorption on the floc materials, but even more an effect of biodegradation, especially in the facultative process. Recommendation and Outlook. In applying the F-A system to treat a dye wastewater, the control of facultative processes and the set up of appropriate operation conditions appear to be critical factors. Also, it is suggested a moderate COD loading rate and about a 24-hour HRT will favor the F-A system.     

Anaerobic treatment of slaughterhouse wastewater: a review

This article presents a review of anaerobic treatment technologies to treat slaughterhouse wastewater including its advantages and disadvantages. Physico-chemical characteristics and biochemical methane potential (BMP) of slaughterhouse wastewater are addressed. Various anaerobic treatment technologies are presented with the related operating parameters, viz., hydraulic retention time (HRT), organic loading rate (OLR), upflow velocity (V_up), and biogas yield vis-a-vis treatment efficiency in terms of chemical oxygen demand (COD). In addition, various factors that affect the anaerobic treatment of slaughterhouse wastewater such as high oil & grease (O & G) concentration in influent, inhibitors, volatile fatty acids (VFAs), and the loading rate are also addressed. The literature review indicated that the slaughterhouse wastewater can be treated effectively by employing any anaerobic treatment technologies at OLRs up to 5 kg COD/m³.d with more than 80% COD removal efficiency without experiencing operational problems. Anaerobic hybrid reactors (AHRs) were found the most effective among various reviewed technologies because of their ability to operate at higher OLRs (8 to 20 kg COD/m³.d) and lower HRTs (8 to 12 hrs).

     

Ti/BDD/PbO2复合电极在化学需氧量测定中的应用

以钛基掺硼金刚石为基体,采用电沉积的方法制备了Ti/BDD/PbO2复合电极,并将其用于化学需氧量(COD)的测定。采用扫描电子显微镜(SEM)和X射线衍射谱图(XRD)表征了电极的微观形貌及结构,采用电化学工作站考察了电极对有机物响应特性。实验结果表明,在1.45 V的低电位条件下,线性范围为0.5～175 mg/L,检测限为0.3 mg/L(S/N=3)。采用Ti/BDD/PbO2复合电极测定法和重铬酸钾标准方法对市政污水、食品废水及印染废水的对比结果表明,2种方法的相对误差小于10%,具有良好的一致性。     

Ti/BDD/PbO_2复合电极在化学需氧量测定中的应用

以钛基掺硼金刚石为基体,采用电沉积的方法制备了Ti/BDD/PbO2复合电极,并将其用于化学需氧量（COD）的测定。采用扫描电子显微镜（SEM）和X射线衍射谱图（XRD）表征了电极的微观形貌及结构,采用电化学工作站考察了电极对有机物响应特性。实验结果表明,在1.45 V的低电位条件下,线性范围为0.5～175 mg/L,检测限为0.3 mg/L（S/N=3）。采用Ti/BDD/PbO2复合电极测定法和重铬酸钾标准方法对市政污水、食品废水及印染废水的对比结果表明,2种方法的相对误差小于10%,具有良好的一致性。     

ABR-SBR法处理草浆造纸中段废水试验研究

针对草浆造纸中段废水 ,进行了ABR、SBR及ABR SBR组合处理工艺的研究 ,结果表明 :ABR的HRT为 6h时 ,废水可生化性由 0 2— 0 2 5增加到 0 4— 0 5 ;SBR最佳HRT为 8h ,单独运行 ,COD去除率 6 5 %左右 ;ABR SBR组合工艺中SBR处理效果明显提高 ,COD去除率达 80 %左右 ,且组合工艺处理效果好 ,COD和BOD5去除率达 90 %左右 ,抗冲击负荷能力强。     

Ozonation of oxytetracycline and toxicological assessment of its oxidation by-products

Antibiotic formulation effluents are well known for their difficult elimination by traditional bio-treatment methods and their important contribution to environmental pollution due to its fluctuating and recalcitrant nature. In the present study the effect of ozonation on the degradation of oxytetracycline (OTC) aqueous solution (100mgl(-1)) at different pH values (3, 7 and 11) was investigated. Ozone (11mgl(-1) corresponds the concentration of ozone in gas phase) was chosen considering its rapid reaction and decomposition rate. The concentration of oxytetracycline, chemical oxygen demand (COD), biochemical oxygen demand (BOD) and BOD5/COD ratio were the parameters to evaluate the efficiency of the ozonation process. In addition, the toxic potential of the OTC degradation was investigated by the bioluminescence test using the LUMIStox 300 instrument and results were expressed as the percentage inhibition of the luminescence of the marine bacteria Vibrio fischeri. The results demonstrate that ozonation as a partial step of a combined treatment concept is a potential technique for biodegradability enhancement of effluents from pharmaceutical industries containing high concentration of oxytetracycline provided that the appropriate ozonation period is selected. At pH 11 and after 60min of ozonation of oxytetracycline aqueous solutions (100 and 200mgl(-1)) the BOD5/COD ratios were 0.69 and 0.52, respectively. It was also shown that COD removal rates increase with increasing pH as a consequence of enhanced ozone decomposition rates at elevated pH values. The results of bioluminescence data indicate that first by-products after partial ozonation (5-30min) of OTC were more toxic than the parent compound.     

Treatment of pharmaceutical wastewater containing antibiotics by O3 and O3/H2O2 processes

Ozonation of three different synthetic pharmaceutical formulation wastewater containing two human antibiotics and a veterinary antibiotic has been studied to enhance the their biodegradability. The effects of pH and initial chemical oxygen demand (COD) value as well as addition of hydrogen peroxide on ozonation process were investigated. Total organic carbon (TOC), COD, biochemical oxygen demand (BOD), and aromatic content (UV254) were the parameters followed to evaluate the performance of ozonation process. Comparison of the biodegradability of selected wastewaters containing different antibiotics confirmed that the variation of biodegradability was associated with the target compound. While BOD5/COD ratio of veterinary antibiotic formulation wastewater was increased from 0.077 to 0.38 with an applied ozone dosage of 2.96 g/l, this ratio for human antibiotic I and human antibiotic II was increased from 0 to 0.1 and 0.27 respectively. Moreover the results of this investigation showed that the ozonation process is capable of achieving high levels of COD and aromaticity removals at about their natural pH values.     

Integrated physicochemical and biological treatment process for fluoride and phosphorus removal from fertilizer plant wastewater

The phosphate fertilizer industry produces highly hazardous and acidic wastewaters. This study was undertaken to develop an integrated approach for the treatment of wastewaters from the phosphate industry. Effluent samples were collected from a local phosphate fertilizer producer and were characterized by their high fluoride and phosphate content. First, the samples were pretreated by precipitation of phosphate and fluoride ions using hydrated lime. The resulting low- fluoride and phosphorus effluent was then treated with the enhanced biological phosphorus removal (EBPR) process to monitor the simultaneous removal of carbon, nitrogen, and phosphorus. Phosphorus removal included a two-stage anaerobic/aerobic system operating under continuous flow. Pretreated wastewater was added to the activated sludge and operated for 160 days in the reactor. The operating strategy included increasing the organic loading rate (OLR) from 0.3 to 1.2 g chemical oxygen demand (COD)/L.d. The stable and high removal rates of COD, NH4(+)-N, and PO4(3-)-P were then recorded. The mean concentrations of the influent were approximately 3600 mg COD/L, 60 mg N/L, and 14 mg P/L, which corresponded to removal efficiencies of approximately 98%, 86%, and 92%, respectively.     

Advanced oxidation treatment of physico-chemically pre-treated olive mill industry effluent

In this study, the applicability of physico-chemical methods was investigated for the pre-treatment of the olive mill effluents prior to the discharge into the common sewerage ending with a municipal wastewater treatment plant. The samples were taken from an olive oil industry operated as three-phase process located in Turkey. Various pre-treatment methods including acid craking, polyelectrolyte and lime additions were applied. Advanced oxidation study using Fenton's process was also investigated following pre-treatment by acid cracking and cationic polyelectrolyte. Acid cracking alone gave satisfactory treatment efficiencies and polyelectrolite additions to the acid-cracked samples enhanced treatment efficiency. Since a complete treatment plant is available at the end of the sewer system, results indicated that the effluents of the investigated industry could be discharged into the municipal sewerage in the case of total chemical oxygen demand (COD_tot), suspended solid (SS) and volatile suspended solid (VSS) concentrations according to the Turkish Water Pollution Control Regulation after pre-treatment with 5 ppm anionic polyelectrolyte following acid cracking. The minimum COD_tot, SS and VSS removals were observed when raw wastewater was pre-treated with lime and the discharge standards to the municipal sewer system could not be met. Advanced oxidation with Fenton's process was applied after acid cracking and cationic polyelectrolyte treatment in order to investigate further reduction in chemical oxygen demand (COD) concentration for minimizing the influence of this industrial discharge on the existing municipal wastewater treatment plant. Results indicated that COD_tot removal increased up to 89% from 74% after Fenton's oxidation for the acid cracked samples in which cationic polyelectrolite (10 ppm) was added.     

The effect of residual chemical oxygen demand on anoxic and aerobic phosphate uptake and release with various intracellular polymer levels.

This study investigated the anoxic and aerobic phosphate uptake and release reactions and the fraction of denitrifying phosphate-accumulating organisms (DPAOs) under various initial chemical oxygen demand (COD) and residual COD conditions. The results showed that DPAOs and non-DPAOs could release phosphate when high soluble COD was present. Consequently, the phosphate-uptake potential was dynamic and increased when the initial COD increased, the initial polyhydroxyalkanoates (PHA) increased, and the residual COD decreased. Furthermore, the electron acceptor (oxygen of nitrate) has more significant influence on the phosphate uptake/release characteristics, while the residual COD concentrations have little influence on that. The fraction of DPAOs to phosphate-accumulating organisms was 42% when the initial PHA storage was enough by both DPAOs and non-DPAOs. This was closely related to the relative phosphate uptake (47%) in the anoxic zone of the process.     

Delivery and frequency distributions of combined wastewater collection system wet and dry weather loads

Combined wastewater collection systems continue to serve as a common urban conveyance method in urban areas of Europe and older urban areas of the United States. This study uses combined wastewater collection system monitoring data from the urbanizing Liguori catchment and channel in Cosenza (Italy) to illustrate event-based delivery and distribution of conveyed pollutant indices. Motivated by recent European Union (EU) discharge control legislation, this study specifically differentiates the event-based delivery of these indices between dry and wet-weather flows. Although the relatively steady to diurnal-variable delivery phenomena in dry weather flows are known, transport limiting phenomena for wet-weather hydrology and mass delivery typically are not known for the same catchment. Limiting categories of transport for a pollutant phase are generated by variables such as flow volume and duration, stream power, hydrograph parameters, and previous dry hours (PDH). Transport limitations of wet and dry weather events from the 414-ha catchment were analyzed and characterized as limited by mass indices (first-order, first flush transport) or limited by flow (zero-order transport). Results indicated significant concentration differences between mass- and flow-limited events. Higher concentrations were associated with mass-limited events. Frequency distributions of flow, total suspended solids (TSS), chemical oxygen demand (COD), and five-day biochemical oxygen demand (BOD5) were consistently exponential for wet-weather and mass-limited events. In contrast, flow, TSS, and BOD5 concentrations were distributed normally for flow-limited events. Results indicated a reasonable linear relationship between discharged TSS, COD, and BOD5 (biochemical oxygen demand) for Liguori Channel discharges into the Crati River. Wet-weather event transport was predominately mass-limited for TSS, COD, and BOD5.     

Simultaneous nitrification and denitrification with anoxic phosphorus uptake in a membrane bioreactor system.

The performance of an innovative membrane bioreactor (MBR) process using anoxic phosphorus uptake with nitrification and denitrification for the treatment of municipal wastewater with respect to operational performance and effluent quality is addressed in this paper. The system was operated at steady-state conditions with a synthetic acetate-based wastewater at a hydraulic retention time (HRT) of 12 hours and on degritted municipal wastewater at a total system HRT of 6 hours. The MBR system was able to achieve 99% biochemical oxygen demand (BOD), chemical oxygen demand (COD), and ammonia-nitrogen (NH4(+)-N); 98% total Kjeldahl nitrogen (TKN); and 97% phosphorus removal, producing effluent BOD, COD, NH4+-N, TKN, nitrate-nitrogen, nitrite-nitrogen, and phosphate-phosphorus of <3, 14, 0.2, 0.26, 5.8, 0.21, and <0.01 mg/L, respectively, at the 6-hour HRT. The comparison of the synthetic and municipal wastewater run is presented in this paper. Steady-state mass balance on municipal wastewater was performed to reveal some key features of the modified MBR system.     

Potential of ultrafiltration for organic matter removal in the polymer industry effluent based on particle size distribution analysis

The purpose of the study was the experimental evaluation of ultrafiltration as a potential innovative technology for the removal of organic matter of around 15,000 mg chemical oxygen demand (COD) per liter in the polymer industry wastewater. Particle size distribution (PSD) analysis served as the major experimental instrument along with conventional chemical settling. Biodegradation characteristics of the remaining COD after ultrafiltration were determined by model interpretation of the corresponding oxygen uptake rate (OUR) profile. The study first involved a detailed characterization of the polymer wastewater including PSD analysis of the COD content. Chemical treatability was investigated using lime alone and with ferric chloride as coagulants followed with a PSD assessment of the chemically settled effluent. Modeling of the OUR profile generated by the ultrafiltration effluent defined related biodegradation kinetics and provided information on the overall COD removal potential. PSD analysis indicated that more than 70 % of the total COD accumulated in the 220- to 450-nm size range. It indicated that ultrafiltration was potentially capable of removing more than 90 % of the COD with an effluent lower than 1,500 mg COD/L. Chemical settling with 750 mg/L of FeCl₃ dosing at a pH of 7.0 provided a similar performance. The ultrafiltration effluent included mainly hydrolysable COD and proved to be biodegradable, with the process kinetics compatible with domestic sewage. PSD evaluation proved to be a valuable scientific instrument for underlining the merit of ultrafiltration as the appropriate innovative technology for polymer wastewater, removing the major portion of the COD in a way that is suitable for recovery and reuse and producing a totally biodegradable effluent.     

Catalytic hydrothermal treatment of pulping effluent using a mixture of Cu and Mn metals supported on activated carbon as catalyst

The present study was performed to investigate the performance of activated carbon-supported copper and manganese base catalyst for catalytic wet oxidation (CWO) of pulping effluent. CWO reaction was performed in a high pressure reactor (capacity?=?0.7 l) at temperatures ranging from 120 to 190 °C and oxygen partial pressures of 0.5 to 0.9 MPa with the catalyst concentration of 3 g/l for 3 h duration. With Cu/Mn/AC catalyst at 190 °C temperature and 0.9 MPa oxygen partial pressures, the maximum chemical oxygen demand (COD), total organic carbon (TOC), lignin, and color removals of 73, 71, 86, and 85 %, respectively, were achieved compared to only 52, 51, 53, and 54 % removals during the non-catalytic process. Biodegradability (in terms of 5-day biochemical oxygen demand (BOD₅) to COD ratio) of the pulping effluent was improved to 0.38 from an initial value of 0.16 after the catalytic reaction. The adsorbed carbonaceous fraction on the used catalyst was also determined which contributed meager TOC reduction of 3–4 %. The leaching test showed dissolution of the metals (i.e., Cu and Mn) from the catalysts in the wastewater during CWO reaction at 190 °C temperature and 0.9 MPa oxygen partial pressures. In the future, the investigations should focus on the catalyst reusability.