Recovery of an Aqueous Iron Phosphating/ Degreasing Bath by Ultrafiltration

Aqueous cleaners are emerging as safe and effective alternatives to solvent degreasers, but switching to water-based cleaners may create a new waste which is high in oil and grease and potentially RCRA hazardous. In the case study summarized here, one metal fabricator replaced a trichloroethylene degreaser with an aqueous iron phosphating/degreasing bath to clean and precondition steel parts. The aqueous bath typically lasted three to four months, until the buildup of oil in the tank began to sacrifice product quality and raise oil and grease levels in the rinse water discharge. Hauling away and replacing the spent cleaner resulted in more than 15,000 gallon/year of hazardous waste.

Ultrafiltration was selected as the most promising technology to recycle the aqueous cleaner and thereby reduce hazardous waste generation. Following pilot-scale testing at the Illinois Hazardous Waste Research and Information Center, on-site full-scale testing integrated the new waste reduction scheme directly into the facility’s production process. Ultrafiltration continuously filtered and returned clean process solution back to the iron phosphating/degreasing bath during normal plant operation, substantially reducing and maintaining oil concentrations at acceptable operating levels. The new process design successfully reduced hazardous waste generation 99.8 percent with a payback period of only 6.9 months.     

Relationship of Destruction Parameters to the Destruction/Removal Efficiency of PCBs

The destruction/removal efficiency (DRE), and the ability to accurately measure it, is a function of the concentration of the chemical compound in the input waste, the incinerator design and operation, sampling methods, and the analytical procedures. All of these are interrelated. This paper discusses the basic DRE equation [DRE = W_In W_out)/W_in × 100] and how it relates to some of the other destruction parameters. Some example data from the literature are presented. While PCBs have been used as the example, the equations and graphs are equally valid for some other hazardous compounds (POHCs), with the substitution of the 99.99% DRE requirement in lieu of the 99.9999% DRE for PCBs. The use of the relationships discussed in this paper should allow incinerator operators to more efficiently plan demonstration test burns which will adequately demonstrate the DRE.     

Performance of a Semi-Industrial Scale Gasification Process for the Destruction of Polychlorinated Biphenyls

Abstract

A semi-industrial scale test was conducted to thermally treat mixtures of spent oil and askarels at a concentration of 50,000 ppm and 100,000 ppm of polychlorinated biphenyls (PCBs) under a reductive atmosphere. In average, the dry-basis composition of the synthesis gas (syngas) obtained from the gasification process was: hydrogen 46%, CO 34%, CO₂ 18%, and CH₄ 0.8%. PCBs, polychlorinated dibenzo-p-dioxins, and polychlorinated dibenzofurans (PCDDs/PCDFs) in the gas stream were analyzed by high-resolution gas chromatography (GC)-mass spec-trometry. The coplanar PCBs congeners 77, 105, 118, 156/157, and 167 were detected in the syngas at concentrations <2 ×10^?7 mg/m³ (at 298 K, 1 atm, dry basis, 7% O₂). The chlorine released in the destruction of the PCBs was transformed to hydrogen chloride and separated from the gas by an alkaline wet scrubber. The concentration of PCBs in the water leaving the scrubber was below the detection limit of 0.002 mg/L, whereas the destruction and removal efficiency was >99.9999% for both tests conducted. The concentration of PCDDs/PCDFs in the syngas were 8.1 ×10^?6 ng-toxic equivalent (TEQ)/m³ and 7.1 × 10^?6 ng-TEQ/m³ (at 298 K, 1 atm, dry basis, 7% O₂) for the tests at 50,000 ppm and 100,000 ppm PCBs, respectively. The only PCDD/F congener detected in the gas was the octachloro-dibenzo-p-dioxin, which has a toxic equivalent factor of 0.001. The results obtained for other pollutants (e.g., metals and particulate matter) meet the maximum allowed emission limits according to Mexican, U.S., and European regulations for the thermal treatment of hazardous waste (excluding CO, which is a major component of the syngas, and total hydrocarbons, which mainly represent the presence of CH₄).     

Occurrence,spatial distribution,sources, and risks of polychlorinated biphenyls and heavy metals in surface sediments from a large eutrophic Chinese lake (Lake Chaohu)

Surface sediment from large and eutrophic Lake Chaohu was investigated to determine the occurrence, spatial distribution, sources, and risks of polychlorinated biphenyls (PCBs) and heavy metals in one of the five biggest freshwater lakes in China. Total concentration of PCBs (Σ₃₄PCBs) in Lake Chaohu was 672 pg g^?1 dry weight (dw), with a range of 7 to 3999 pg g^?1 dw, which was lower than other water bodies worldwide. The majority of heavy metals were detected at all sampling locations, except for Sr, B, and In. Concentrations of Al, Fe, Ca, Mn, Sr, Co, Zn, Cd, Pb, and Hg were similar to that reported for other lakes globally. Concentrations of K, Mg, Na, Li, Ga, and Ag were greater than the average, whereas those of Cr, Ni, and Cu were lower. Cluster analysis (CA) and positive matrix factorization (PMF) yielded accordant results for the source apportionment of PCBs. The technical PCBs and microbial degradation accounted for 34.2 % and 65.8 % of total PCBs using PMF, and PMF revealed that natural and anthropogenic sources of heavy metals accounted for 38.1 % and 61.8 %, respectively. CA indicated that some toxic heavy metals (e.g., Cd, In, Tl, and Hg) were associated with Ca–Na–Mg minerals rather than Fe–Mn minerals. The uncorrelated results between organic matter revealed by pyrolysis technology and heavy metals might be caused by the existence of competitive adsorption between organic matter and minerals. PCBs and heavy metals were coupling discharge without organochlorine pesticides (OCPs), but with polycyclic aromatic hydrocarbons (PAHs) and polybrominated diphenyl ethers (PBDEs). No sediment sample exceeded the toxic threshold for dioxin-like PCBs (dl-PCBs) set at 20 pg toxicity equivalency quantity (TEQ)?g^?1, (max dl-PCBs, 10.9 pg TEQ g^?1). However, concentrations of Ag, Cd, and Hg were at levels of environmental concern. The sediment in the drinking water source area (DWSA) was threatened by heavy metals from other areas, and some fundamental solutions were proposed to protect the DWSA.     

Comparison of levels of polychlorinated biphenyls in edible oils and oil-based products—possible link to environmental factors

Food consumption has been widely reported to be the main source of human exposure to PCBs. A total of 47 samples of food products on sale in supermarkets in the United Kingdom were thus analyzed for PCBs to determine residual levels in oil and oil-based products. The objective was to compare the measured levels of total PCBs (ΣPCBs) in food products to those reported in various environmental compartments. Combined extraction and online clean up was achieved using Accelerated Solvent Extraction? (ASE) to recover target analytes for analysis by GC-MSD (gas chromatography mass spectrometry). Σ PCBs (ng/g) in each product were in the ranges of 4.73–44.38 edible oil; 1.40–6.18 mayonnaise; 1.21–6.25 salad cream; 1.28–5.64 seafood sauce, and 0.97–15.08 exotic dressing. The level of human exposure to PCBs in all products was < 1 μg/kg body weight/day when considering a 70 kg male or 57 kg female, possibly reflecting the reported decline of PCBs in the environment.     

Removal of PCBs from wastewater using fly ash

Liquids and sludges containing polychlorinated biphenyls (PCBs) can be treated to concentrate the PCBs in a solid residue. The latter can then be handled to destroy the PCBs. A study on sorption kinetics of PCBs on fly ash was conducted in controlled batch systems. TCB and HeCB are removed at 25 degrees C by adsorption on fly ash up to 97% at pH 7, with an adsorbent dose of 5 g/l. An examination of the thermodynamic parameters shows that the adsorption of TCB and HeCB by fly ash is a process occurring spontaneously at ambient conditions. Activation energies for the sorption process ranged between 5.6 and 49.1 kJ/mol. It was observed that the rate at which TCB and HeCB are adsorbed onto fly ash showed a diffusion limitation. The uptake rate of TCB and HeCB increases with increasing initial concentration and gradually tends to a constant value. A decrease in the adsorption of TCB and HeCB was observed when interfering ions and other PCB congeners were present. Changing the pH in the aqueous solution from 2 to 10 had no effect on the adsorption process. Overall, fly ash can be used for an efficient removal of PCBs from several aqueous solutions.     

Polychlorinated biphenyls in the Kupa River, Croatia, Yugoslavia

The presence of polychlorinated biphenyls (PCBs) was investigated in samples of water, suspended particles, sediments and fish from the Kupa river, Croatia, Yugoslavia, along a river stretch extending up to 10 km upstream and 200 km downstream of the primary contaminated karst region. Contamination was due to improper disposal of industrial waste discharge. The PCB levels detected in the samples collected downstream ranged from 1 to 52 ng 1⁻¹ for water, from 50 to 190 μg kg⁻¹ for suspended particles and from 8 to 39 μg kg⁻¹ for the sediment. A wide range of PCB concentrations, from 0.1 to 42.3 μg g⁻¹, which were measured in edible portions of different fish confirmed a long-term contamination of the river with PCBs. As the Kupa may be classified among low to moderately contaminated waters, it is essential that the investigations of the presence and behaviour of PCBs in the river and its environment be continued.     

Persistent organic pollutants in plastic marine debris found on beaches in San Diego, California

Plastic debris were collected from eight beaches around San Diego County, California. Debris collected include: pre-production pellets and post-consumer plastics including fragments, polystyrene (PS) foam, and rubber. A total of n = 2453 pieces were collected ranging from <5 mm to 50 mm in size. The plastic pieces were separated by type, location, and appearance and analyzed for polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethane (DDT) and its breakdown products, and chlordanes. PAH concentrations ranged from 30 ng g⁻¹ to 1900 ng g⁻¹, PCBs from non-detect to 47 ng g⁻¹, chlordanes from 1.8 ng g⁻¹ to 60 ng g⁻¹, and DDTs from non-detect to 76 ng g⁻¹. Consistently higher PAH concentrations found in PS foam samples (300-1900 ng g⁻¹) led us to examine unexposed PS foam packaging materials and PS virgin pellets. Unexposed PS foam contained higher concentrations of PAHs (240-1700 ng g⁻¹) than PS virgin pellets (12-15 ng g⁻¹), suggesting that PAHs may be produced during manufacturing. Temporal trends of debris were investigated at one site, Ocean Beach, where storm events and beach maintenance were found to be important variables influencing debris present at a given time.     

Comparison of levels of polychlorinated biphenyls in edible oils and oil-based products--possible link to environmental factors

Food consumption has been widely reported to be the main source of human exposure to PCBs. A total of 47 samples of food products on sale in supermarkets in the United Kingdom were thus analyzed for PCBs to determine residual levels in oil and oil-based products. The objective was to compare the measured levels of total PCBs (Sigma PCBs) in food products to those reported in various environmental compartments. Combined extraction and online clean up was achieved using Accelerated Solvent Extraction (ASE) to recover target analytes for analysis by GC-MSD (gas chromatography mass spectrometry). Sigma PCBs (ng/g) in each product were in the ranges of 4.73-44.38 edible oil; 1.40-6.18 mayonnaise; 1.21-6.25 salad cream; 1.28-5.64 seafood sauce, and 0.97-15.08 exotic dressing. The level of human exposure to PCBs in all products was < 1 microg/kg body weight/day when considering a 70 kg male or 57 kg female, possibly reflecting the reported decline of PCBs in the environment.     

Organochlorine pesticide residues and PCBs in eels ( ) from some British freshwater reedbeds

Organochlorine pesticide residues and PCBs were measured in bulked samples of whole eels collected in 1991 from 11 reedbed sites of wildlife conservation importance in Britain. Eels from some sites had only trace amounts of dieldrin, p,p-DDE and PCBs. Maximum concentrations were 0.21 mg kg⁻¹ for dieldrin, 0.27 mg kg⁻¹ for p,p-DDE and 0.91mg kg⁻¹ for PCBs (fresh weight). Concentrations of contaminants in eels from reedbeds were considered in general to be lower than in eels from rivers, but nevertheless concentrations were considered to be sufficiently high at some sites to adversely affect top carnivores such as the otter.     

Distribution and ecological risk of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in surface sediments from the Bizerte lagoon,Tunisia

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were determined in 18 surface sediment samples collected from Bizerte lagoon, Tunisia. The total concentrations of ten PCBs (∑PCBs) and of four OCPs (∑OCPs) in the sediments from this area ranged from 0.8 to 14.6 ng g^?1 dw (average value, 3.9 ng g^?1 dw) and from 1.1 to 14.0 ng g^?1 dw (average value, 3.3 ng g^?1 dw), respectively. Among the OCPs, the range of concentrations of dichlorodiphenyltrichloroethane and its metabolites (DDTs) and hexachlorobenzene (HCB) were 0.3–11.5 ng g^?1 dw (1.9 ng g^?1 dw) and 0.6–2.5 ng g^?1 dw (1.4 ng g^?1 dw), respectively. Compositional analyses of the POPs indicated that PCB 153, 138 and 180 were the predominant congeners accounting for 60 % of the total PCBs. In addition, p,p′-DDT was found to be the dominant DDTs, demonstrating recent inputs in the environment. Compared with some other regions of the world, the Bizerte lagoon exhibited low levels of PCBs and moderate levels of HCB and DDTs. The high ratios ΣPCBs/ΣDDTs indicated predominant industrial versus agricultural activities in this area. According to the established guidelines for sediment quality, the risk of adverse biological effects from such levels of OCPs and PCBs, as recorded at most of the study sites, was insignificant. However, the higher concentrations in stations S1 and S3 could cause biological damage.     

Organohalogen exposure in a Eurasian Eagle owl (Bubo bubo) population from Southeastern Spain: temporal-spatial trends and risk assessment

Polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs) and organochlorine insecticides (OCs) were analysed in 58 Eurasian Eagle owl (Bubo bubo) unhatched eggs collected between 2004 and 2009 in Southeastern Spain. Levels of p,p′-DDE were found to be higher than in eggs laid by other European owls in the same decade, probably due to the greater agricultural activity in our study area. Compared to other European raptors, exposure to PCBs can be considered intermediate, but low to PBDEs. Land use differences and prey availability were the rationale to divide the study area in two subareas in further assessments. Temporal trends of HCB, p,p′-DDE, β-HCH, PCBs and PBDEs were significantly different in each subarea, generally increasing over time in the Southern but decreasing or remaining stable in the Northern. On the contrary, levels of cyclodienes tended to decrease in both subareas. Dietary shifts with a greater amount of birds are suggested as a cause for increasing organochlorine loads in raptors. This may explain the increasing trend in the Southern territories. However, due to the proximity of most of these nests to Cartagena, an important industrial city, increasing environmental pollution cannot be ruled out. Although average levels of the compounds analysed are below threshold levels, 17% of the samples exceeded 400 pg g⁻¹ ww (wet weight), the LOAEC for Total TEQs. Moreover, a negative correlation between TEQ concentrations and the metabolizable fraction of PCBs (F_prob = 0.0018) was found when TEQs values were above 10 pg g⁻¹ ww. This could be indicative of hepatic enzymes induction in the birds exposed at higher concentrations, which are mainly breeding in the Southern subarea. These females could be suffering from Ah-receptor-related toxic effects, some of which have been related to altered bird reproduction. Finally, a significant negative correlation between p,p′-DDE levels and eggshell thickness (r = −0.469, p < 0.001) was observed, with about 17% of eggshell thinning for eggs with p,p′-DDE levels above 100 μg g ⁻¹ lw. The persistence of this degree of thinning over a period of time has been related to population declines in other raptor species.     

Models for gas/particle partitioning,transformation and air/water surface exchange of PCBs and PCDD/Fs in CMAQ

We have added the capability to simulate polychlorinated biphenyls (PCBs) and polychlorinated dibenzo [p] dioxins and polychlorinated dibenzo-furans (PCDD/Fs) to the Community Multiscale Air Quality (CMAQ) modeling system, thus taking advantage of the latter's capability to simulate atmospheric advection, diffusion, gas-phase chemistry, cloud/precipitation, and aerosol processes. The modifications reported here include the addition to the CMAQ system of two gas/particle partitioning models options: the Junge–Pankow adsorption model and the K_OA absorption model, as well as chemical transformations and atmosphere/water surface exchange processes for these semi-volatile organics. Simulations for the purpose of model testing and validation were conducted for the years 2000 and 2002 on a domain covering most of North America. Both partitioning models give reasonable results when compared with available measurements. The model predictions of deposition and air concentrations also agree well with measurements. The modeling results also indicate that the long-range transport is important and anthropogenic emissions of PCBs and PCDD/Fs are dominant although surface exchange of PCBs may be important for some clean locations.     

Polychlorinated biphenyls (PCBs) in marine fishes from China: Levels, distribution and risk assessment

Muscle tissues of large yellow croakers (Pseudosciaena crocea) and sliver pomfret (Pampus argenteus) from nine coastal cities of East China including Dalian, Tianjin, Qingdao, Shanghai, Zhoushan, Wenzhou, Fuzhou, Quanzhou and Xiamen were analyzed for polychlorinated biphenyl (PCB) concentrations. Thirty-six PCB congeners were quantified in the fishes, of which 11 congeners were dioxin-like PCBs. The total PCB concentrations of the present study were at the low end of the global range, which may be related to the smaller usage and shorter consumption history of PCBs in China. PCBs 18, 29, 52, 66, 101, 104, 138, 153, 180 and 194 were the major constituents found in the fish samples. Regression analysis showed a strong positive correlation (R² = 0.800; p < 0.001) between total dioxin-like PCBs and total PCB concentrations, and that total PCB concentrations explain 80% of the variability in total dioxin-like PCB concentrations. Among the species investigated, significantly higher concentrations of total PCBs were found in croakers than in pomfrets, which may be attributed to their different feeding and living habits. No significant difference in total PCB concentrations among the cities was observed; principal component analysis (PCA) of PCB profiles indicated that PCB pollution came from similar sources in the sampling areas and that there may be other PCB sources in Dalian and Wenzhou. The calculated carcinogenic risks (CRs) from the two species based on a low consumption group and high consumption group were all greater than 10⁻⁶, suggesting that daily exposure to dioxin-like PCBs via fish consumption results in a lifetime cancer risk of greater than one in one million. In contrast, the hazard quotients (HQs) of noncancer risks were all less than unity.     

Seasonal variability of polychlorinated biphenyls (PCBs) and polychlorinated diphenyl ethers (PBDEs) congener profiles in butter in Poland: Dietary risk evaluation

Various statistical methods have been employed to analyse in details seasonal diversification of polychlorinated biphenyl (PCB)/polybrominated diphenyl ether (PBDE) congener profiles found in butter fat. The variability of the PCB/PBDE congener profiles indicates the presence of various sources of the milk fat contamination. The obtained results suggest that the environmental chemical background has the highest share in the contamination sources pattern. Ion trap mass spectrometry coupled to high-resolution gas chromatography with semi-permeable membrane dialysis sample cleanup was used for determination of PCBs and PBDEs in milk fat. Determined butter fat PCB profiles were similar to the profiles characteristic for Aroclor 1254 technical mixture. Our data indicate that dietary intake of PCB/PBDE with milk and milk products may be estimated to be about 717.5 pg kg b.w.^?1 day^?1 for six-indicator PCBs, 0.329 (equivalent toxicity, TEQ) pg kg b.w.^?1 day^?1 for 12 DL PCBs and 50 pg kg b.w.^?1 day^?1 for PBDEs (sum of 14 congeners).     

Occurrence and possible sources of polychlorinated biphenyls in surface sediments from the Wuhan reach of the Yangtze River, China

Twenty-seven surface sediment samples were collected from the mainstream and eight tributaries of the Wuhan reach of the Yangtze River, China, in 2005, in order to assess the distribution, possible sources, and potential risk of polychlorinated biphenyls (PCBs) in the environment. The total concentrations of PCBs (the sum of 39 congeners) ranged from 1.2 to 45.1 ng g⁻¹ dry weight, with a mean value of 9.2 ng g⁻¹. Sediment samples with the highest PCB concentrations came from the tributary sites, which are closer to PCB sources. Conversely, PCB concentrations in the sediment from the mainstream sites of Yangtze River were relatively low. The observed PCB levels were higher than those found in the sediments of other rivers in China, but lower than those in river sediments from other urban areas and harbors around the world. Low-chlorinated PCBs, dominated by tetra-PCBs and penta-PCBs, were identified as being prevalent in the surface sediments. Correlation analyses between the PCBs and the geochemistry and heavy metal content of the sediments suggest that the washing of these compounds from the land into the river by floods and heavy rains, or industrial wastewater and domestic sewage, may be the major sources of the PCBs. According to established sediment quality guidelines, the risk of adverse biological effects from the levels of PCBs recorded at most of the studied sites should be insignificant, although the higher concentrations at other sites could cause acute biological damage.     

Levels of PCDD/Fs,PCBs and PBDEs in breast milk of women living in the vicinity of a hazardous waste incinerator: Assessment of the temporal trend

The concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) were determined in breast milk from women living in the vicinity of a hazardous waste incinerator (HWI) in Catalonia, Spain. The results were compared with the levels obtained in previous surveys carried out in the same area in 1998 (baseline study), 2002 and 2007. The current total concentrations of 2,3,7,8-chlorinated PCDD/Fs in breast milk ranged from 18 to 126 pg g⁻¹ fat (1.1–12.3 pg WHO₂₀₀₅-TEQ_PCDD/F), while the total levels of PCBs ranged from 27 to 405 pg g⁻¹ fat (0.7–5.3 pg WHO₂₀₀₅-TEQ_PCB). In turn, PBDE concentrations (sum of 15 congeners) ranged 0.3–5.1 g g⁻¹ fat, with a mean value of 1.3 ng g⁻¹ fat. A general decrease in the concentrations for PCDD/Fs, both planar and total PCBs, and PBDEs in breast milk was observed. The levels of PCDD/Fs, PCBs, and PBDEs in milk of women living in urban zones were higher than those corresponding to industrial zones (41%, 26%, and 8%, respectively). For PCDD/Fs and PCBs, the current decreases are in accordance with the reduction in the dietary intake of these pollutants that we have also observed in recent studies carried out in the same area of study.     

Electrolytic removal of Rhodamine B from aqueous solution by peroxicoagulation process

Peroxicoagulation treatment of aqueous solution containing hazardous dye, Rhodamine B, with commercially available graphite as cathode and iron as anode has been studied. The effect of various operational parameters such as solution pH, applied voltage, electrode area, other ions, etc. on the dye removal was investigated. The experimental result showed that pH-regulated peroxicoagulation system is an efficient process for the dye removal. Ninety-five percent of the dye was removed after 180 min of electrolysis. Anions such as carbonate, bicarbonate, chloride and sulphate negatively affected the efficiency of peroxicoagulation system. From the present study, it can be concluded that peroxicoagulation process is an efficient tool for dye removal from aqueous solution.     

A case of polychlorinated biphenyl contamination of water and sediment in the Slovenian karst region (Yugoslavia)

An incident is described in which polychlorinated biphenyls (PCBs) from an electro-industrial plant waste tip draining into ground-water channels in karst terrain have contaminated a potable water source. PCB composition data were obtained using quadropole GC-MS and capillary GC. The average level of PCBs determined in water was 0.3 μg 1^?1 and in sediment 55 μg g^?1     

Distribution and ecotoxicological concerns of persistent organic pollutants in sediment from creek ecosystem

In order to study the distribution and ecotoxicological concerns of persistent organic pollutants, grab sediment samples were collected from different locations across Thane creek, India. Analyses of samples were carried out using gas chromatography (GC)–electron capture detector and GC–mass spectrometry techniques. In organochlorine pesticides (OCPs), DDT (1,1,1,-trichloro-2,2-bis(p-chlorophenyl) ethane), DDE (1,1-dichloro-2,2-bis(p-chlorophenyl) ethylene), DDD (1-chloro-4-(2,2-dichloro-1-(4-chlorophenyl)ethyl) benzene) and α, β, and γ conformer of hexachlorocyclohexane (HCH), and 9 polychlorinated biphenyls (PCBs) congeners were analyzed in surface sediment samples. Concentrations of these pollutants in grab sediment samples may indicate their current use and impact on marine ecosystem. Average concentrations of total DDT (including DDD and DDE), HCH, and Σ₉PCBs were found to be 4.9, 12.5, and 2.9 µg kg^?1(dry weight) respectively. High concentrations of OCPs and PCBs were found at discharge locations in creek compared to other locations. Location-wise distribution of OCPs and PCBs indicates their high concentrations at the waste water receiving point. Data were compared for ecotoxicological impacts based on the levels specified in the sediment quality standards of the US Environmental Protection Agency and the Canadian Council of Ministers of the Environment. γ-HCH was found to have maximum potential to induce ecotoxicological impacts.