Comparative toxicities of the polychlorinated dibenzofuran (PCDF) and biphenyl (PCB) mixtures which persist in Yusho victims

The toxic Yusho oil contained a mixture of polychlorinated biphenyls (PCBs) which were contaminated by other halogenated aromatics including the highly toxic polychlorinated dibenzofurans (PCDFs). It has been reported that the PCBs and PCDFs which persist in the liver of victims still suffering from Yusho poisoning include the following compounds; 2,3′,4,4′,5-penta-,2,2′,4,4′,5,5′-,2,2′,3′,4,4′,5- and 2,3,3′,4,4′,5-hexa, 2,2′,3,4,4′,5,5′- and 2,2′,3,3′,4,4′,5-heptachlorobiphenyls and the 2,3,7,8-tetra-, 1,2,4,7,8-, 1,2,3,7,8- and 2,3,4,7,8-penta- and 1,2,3,4,7,8-hexachlorodibenzofurans. All of these PCBs and PCDFs have been synthesized and reconstituted to approximate their composition in human liver. A comparison of the dose-response effects of the reconstituted PCB and PCDF mixtures in causing weight loss, thymic atrophy and the induction of cytochrome P-448-dependent monooxygenases indicated that the PCDF mixture was at least 700 times more active than the PCBs. Since the ratio of PCBs/PCDFs persisting in Yusho patients' blood and liver was less than 600:1 and 5:1 respectively, the results suggest that the PCDFs are the major etiologic agent in Yusho poisoning.     

Individual PCBs as predictors for concentrations of non and mono-ortho PCBs in human milk

32 Dutch human milk samples were analyzed for PCBs with either HRGC-ECD or HRGC-LRMS in the NCI mode. Samples were collected from three different locations in The Netherlands: Amsterdam, Rotterdam and Groningen. Quantitatively, no differences could be observed between the three localities, while in addition the congener specific pattern showed a striking similarity for all individual samples. Only principal component analysis revealed slight individual differences. Based on similarities in the PCB profiles, linear relationships were calculated between 2,3′4,4′,5-PnCB (#118) or 2,2′4,4′5,5′HxCB (#153) and the most relevantnon andmonoortho PCBs exhibiting dioxinlike activity. These PCBs included 2,3,3′,4,4′-PnCB (#105), 3,3′,4,4′5-PnCB (#126) 2,3,3′,4,4′,5-HxCB (#156), 2,3,3′,4,4′,5′-HxCB (#157), 2,3′,4,4′,5,5′-HxCB (#167) and 3,3′,4,4′,5′5-HxCB (#169). Good linear relationships were observed between individual PCBs. Based on the results of this study, PCB #118 can be used to predict concentrations of the PCBs #105 and #126. PCB #153 can be used as a predictor for the PCBs #156, #157, #167 and #169, but also for the total toxic equivalencies (TEQs) ofnon andmonoortho PCBs present in human milk. This method using certain PCBs as predictors for other toxicological relevant congeners, can be useful and cost effective, e.g. for epidemiological studies. However, before applied a number of conditions should be met. These are:

1. A stable composition of the PCB matrix should be established.
2. A possible time dependent change in composition of the matrix should first be excluded when used over different time periods.

     

The bacterial metabolism of 4,4′-dichlorobiphenyl,and its suppression by alternative carbon sources

The metabolism of 4,4′-dichlorobiphenyl by mixed cultures of bacteria, isolated from activated sludge, was studied in shake cultures and in soil, both in presence and absence of alternative carbon sources. When 4,4′-dichlorobiphenyl was used as sole carbon source, 4-chlorobenzoic acid and 4,4′-dichloro-2,3-biphenyldiol could be isolated from the culture medium. Polar metabolites however, could not be detected in soil and in media in which alternative carbon sources such as glucose, glycerol, peptone, yeast-extract, humic acid or activated sludge were present. No hydroxylated or carboxylic acid derivatives could be isolated when 2,4′, 5-tri-, 2,2′,5,5′,-textra-, 2,2′,3,4,5′-penta-, 2,2′,3,4,5,5′-hexa- and decachlorobiphenyl were used as the sole carbon sources for incubation with bacteria in shake culture.     

Biliary secretion,retention and excretion of five 14C-labelled polychlorinated biphenyls in the rat

Five ¹⁴C-labelled polychlorinated biphenyls: 2,4′,5-trichlorobiphenyl, 2,2′,4,5′-tetrachlorobiphenyl, 2,2′,4,5,5′-pentachlorobiphenyl, 2,2′,3,4,4′-pentachlorobiphenyl and 2,2′,4,4′,5,5′-hexachlorobiphenyl were administered orally to bile-cannulated rats. The activity secreted in the bile, excreted in the feces and the urine was determined. Residues of radioactivity in certain tissues and the carcass were also measured.The trichlorobiphenyl showed the highest absorption (93.8%±5.4) from the gastrointestinal tract and biliary secretion of radioactivity (87.6%±6.1 of the dose). The hexachlorobiphenyl showed the lowest absorption and biliary secretion, 28.2%±1.4 and 18.6%±1.3, respectively. The urinary excretion was low and the radioactive residues in the eviscerated carcasses increased with the chlorine content of the biphenyls.     

Accumulation properties of polychlorinated biphenyl congeners in Yusho patients and prediction of their cytochrome P450-dependent metabolism by in silico analysis

In what has become known as the Yusho incident, thousands of people in western Japan were poisoned by the accidental ingestion of rice bran oil contaminated with polychlorinated biphenyls (PCBs) and various dioxins and dioxin-like compounds. In this study, we investigated the accumulation patterns of 69 PCB congeners in the blood of Yusho patients in comparison with those of non-exposed controls. The blood samples were collected at medical check-ups in 2004 and 2005. To compare the patterns of PCB congeners, we calculated the concentration ratio of each congener relative to the 2,2′,4,4′,5,5′-hexaCB (CB153) concentration. The concentration ratios of tetra- and penta-chlorinated congeners in the blood of Yusho patients were significantly lower than those of controls. To examine the cytochrome P450 (CYP)-dependent metabolic potential of the 2,3′,4,4′5-pentaCB (CB118), CB153, and 2,3,3′,4,4′5-hexaCB (CB156) congeners, we conducted PCB-CYP (CYP1A1, CYP1A2, CYP2A6, and CYP2B6) docking simulation by in silico analysis. The docking models showed that human CYP1A1, CYP2A6, and CYP2B6 isozymes have the potential to metabolize CB118 and CB153. On the other hand, it was inferred that CB156 is difficult to be metabolized by these four CYP isozymes. These results indicate that CYP1 and CYP2 isozymes may be involved in the characteristic accumulation patterns of PCB congeners in the blood of Yusho patients.     

Accelerated photo-transformation of 2,2′,4,4′,5,5′-hexachlorobiphenyl (PCB 153) in water by dissolved organic matter

The ubiquitous dissolved organic matter (DOM) has an important influence on transformation of organic contaminants through the production of reactive substances, such as ^?OH, ¹O₂, and ³DOM*. The photolysis of a higher chlorinated polychlorinated biphenyl (PCB) congener (2,2′,4,4′,5,5′-hexachlorobiphenyl, PCB 153) under simulated sunlight in presence of humic acid (HA) was investigated. Degradation of PCB 153 was accelerated significantly by the addition of HA, with a rate constant of 0.0214, 0.0413, and 0.0358 h^?1 in the initial 18 h of irradiation in presence of 1, 5, and 20 mg/L HA, respectively. The main photodegradation products analyzed by gas chromatography mass spectrometry were 4-hydroxy-2,2′,4′,5,5′-pentaCB and 2,4,5-trichlorobenzoic acid. Main reactive species involved were determined by the electron spin-resonance spectroscopy, including ¹O₂ and ^?OH. Special scavengers were added to elucidate the photolysis mechanisms. By using the specific scavengers, it turned out that ^?OH accounted for 29.3 % of the degradation, and the intra-DOM reactive species (¹O₂, ^?OH, and ³DOM*) accounted for 59.6 % of the degradation. Photo-transformation sensitized by DOM, which involves both aqueous and intra-DOM reactions of PCBs with reactive species, may be one of the most important mechanisms for natural attenuation of PCBs.     

Catalytic amination and dechlorination of para-nitrochlorobenzene (p-NCB) in water over palladium-iron bimetallic catalyst

Chemical treatment of para-nitrochlorobenzene (p-NCB) by palladium/iron (Pd/Fe) bimetallic particles represents one of the latest innovative technologies for the remediation of contaminated soil and groundwater. The amination and dechlorination reaction is believed to take place predominantly on the surface site of the Pd/Fe catalysts. The p-NCB was first transformed to p-chloroaniline (p-CAN) then quickly reduced to aniline. 100% of p-NCB was removed in 30 min when bimetallic Pd/Fe particles with 0.03% Pd at the Pd/Fe mass concentration of 3g 75 ml(-1) were used. The p-NCB removal efficiency and the subsequent dechlorination rate increased with the increase of bulk loading of palladium and Pd/Fe. As expected, p-NCB removal efficiency increased with temperature as well. In particular, the removal efficiency of p-NCB was measured to be 67%, 79%, 80%, 90% and 100% for reaction temperature 20, 25, 30, 35 and 40 degrees C, respectively. Our results show that no other intermediates were generated besides Cl(-), p-CAN and aniline during the catalytic amination and dechlorination of p-NCB.     

Environmental chemistry of PCB-replacement compounds - VI - composition and metabolism of Wemcol ®, an isopropylbiphenyl formulation

Wemcol is a technical isopropylbiphenyl formulation that is used as a substitute for polychlorobiphenyl. According to the producer Wemcol is 4-isopropylbiphenyl, but we found our sample to consist of 60.3% 3-isopropylbiphenyl, 38.6% 4-isopropylbiphenyl and 3,5-, 3,3′-, 3,4′- and 4,4′-diisopropylbiphenyl in amounts of 0.3%, 0.4%, 0.2% and 0.1% respectively. The two major components of the mixture are metabolized in the rat by two routes : oxidation of the isopropyl group and hydroxylation of the aromatic nuclei. Rats fed the technical mixture retained 3- and 4-isopropylbiphenyl in a ratio 4.3 : 1 in their abdominal fat, whilst the ratio in the mixture is 1.6 : 1. One week after the simultaneous feeding of equal amounts of Wemcol, 4,4′-dichlorobiphenyl, 2,4′,5-trichlorobiphenyl and 2,2′,5,5′-tetrachlorobiphenyl, the isopropylbiphenyls, in contrast to the chlorobiphenyls, could no longer be detected in the abdominal fat of rats.     

Characterization and risk assessment of polychlorinated biphenyls in soils and vegetations near an electronic waste recycling site, South China

This study aimed at identifying the levels of PCBs generated from e-waste recycling, and their potential impacts on the soils and vegetations as well. The ΣPCBs concentrations in soil and plant samples ranged from 7.4 to 4000 ng g(-1) and from 6.7 to 1500 ng g(-1), respectively. For the plant samples, Chrysanthemum coronarium L. from vegetable field and the wild plant Bidens pilosa L. from the burning site showed relatively higher PCB concentrations than other species. For the soil samples, the e-waste burning site had relatively higher PCB concentrations than the adjacent areas, and vegetable soils had higher PCB concentrations than paddy soils. The PCB concentrations showed a clear decreasing trend with the increasing distance from the e-waste recycling site. PCB 28, 99, 101, 138, 153, and 180 were the predominant congeners. Principal component analysis results showed a potential fractionation of PCB compositions from the burning site to the surroundings. The PCB congener pattern at the burning site was similar to Arochlor 1260, pointing to an input of non-domestic e-waste. Similar PCB congeners were found in soils and related vegetables, indicating they derived from the same source. The consumption of vegetables grown in soils near e-waste recycling sites should be strictly avoided due to the high PCBs in the plant tissues.     

Removal of PCBs in contaminated soils by means of chemical reduction and advanced oxidation processes

Although the chemical reduction and advanced oxidation processes have been widely used individually, very few studies have assessed the combined reduction/oxidation approach for soil remediation. In the present study, experiments were performed in spiked sand and historically contaminated soil by using four synthetic nanoparticles (Fe⁰, Fe/Ni, Fe₃O₄, Fe_3???x Ni _x O₄). These nanoparticles were tested firstly for reductive transformation of polychlorinated biphenyls (PCBs) and then employed as catalysts to promote chemical oxidation reactions (H₂O₂ or persulfate). Obtained results indicated that bimetallic nanoparticles Fe/Ni showed the highest efficiency in reduction of PCB28 and PCB118 in spiked sand (97 and 79 %, respectively), whereas magnetite (Fe₃O₄) exhibited a high catalytic stability during the combined reduction/oxidation approach. In chemical oxidation, persulfate showed higher PCB degradation extent than hydrogen peroxide. As expected, the degradation efficiency was found to be limited in historically contaminated soil, where only Fe⁰ and Fe/Ni particles exhibited reductive capability towards PCBs (13 and 18 %). In oxidation step, the highest degradation extents were obtained in presence of Fe⁰ and Fe/Ni (18–19 %). The increase in particle and oxidant doses improved the efficiency of treatment, but overall degradation extents did not exceed 30 %, suggesting that only a small part of PCBs in soil was available for reaction with catalyst and/or oxidant. The use of organic solvent or cyclodextrin to improve the PCB availability in soil did not enhance degradation efficiency, underscoring the strong impact of soil matrix. Moreover, a better PCB degradation was observed in sand spiked with extractable organic matter separated from contaminated soil. In contrast to fractions with higher particle size (250–500 and <500 μm), no PCB degradation was observed in the finest fraction (≤250 μm) having higher organic matter content. These findings may have important practical implications to promote successively reduction and oxidation reactions in soils and understand the impact of soil properties on remediation performance.     

Identification of a novel hydroxylated metabolite of 2,2′,3,5′,6-pentachlorobiphenyl formed in whole poplar plants

Polychlorinated biphenyls (PCBs) are a group of persistent organic pollutants consisting of 209 congeners. Oxidation of several PCB congeners to hydroxylated PCBs (OH-PCBs) in whole poplar plants has been reported before. Moreover, 2,2′,3,5′,6-pentachlorobiphenyl (PCB95), as a chiral congener, has been previously shown to be atropselectively taken up and transformed in whole poplar plants. The objective of this study was to determine if PCB95 is atropselectively metabolized to OH-PCBs in whole poplar plants. Two hydroxylated PCB95s were detected by high-performance liquid chromatography-mass spectrometry in the roots of whole poplar plants exposed to racemic PCB95 for 30 days. The major metabolite was confirmed to be 4′-hydroxy-2,2′,3,5′,6-pentachlorobiphenyl (4′-OH-PCB95) by gas chromatography-mass spectrometry (GC-MS) using an authentic reference standard. Enantioselective analysis showed that 4′-OH-PCB95 was formed atropselectively, with the atropisomer eluting second on the Nucleodex β-PM column (E2-4′-OH-PCB95) being slightly more abundant in the roots of whole poplar plants. Therefore, PCB95 can at least be metabolized into 4′-OH-PCB95 and another unknown hydroxylated PCB95 (as a minor metabolite) in whole poplar plants. Both atropisomers of 4′-OH-PCB95 are formed, but E2-4′-OH-PCB95 has greater atropisomeric enrichment in the roots of whole poplar plants. A comparison with mammalian biotransformation studies indicates a distinctively different metabolite profile of OH-PCB95 metabolites in whole poplar plants. Our observations suggest that biotransformation of chiral PCBs to OH-PCBs by plants may represent an important source of enantiomerically enriched OH-PCBs in the environment.     

Electrospun and functionalized PVDF/PAN nanocatalyst-loaded composite for dechlorination and photodegradation of pesticides in contaminated water

A novel approach for the electrospinning and functionalization of nanocatalyst-loaded polyvinylidene fluoride/polyacrylonitrile (PVDF/PAN) composite grafted with acrylic acid (AA; which form polyacrylic acid (PAA) brush) and decorated with silver (Ag/PAN/PVDF-g-PAA-TiO₂/Fe–Pd) designed for the dechlorination and photodegradation of pesticides was carried out. PAN was used both as a nitrogen dopant as well as a co-polymer. Smooth nanofibers were obtained by electrospinning a solution of 12:2 wt.% PVDF/PAN blend using dimethylformamide (DMF) as solvent. The nanofibers were grafted with AA by free-radical polymerization using 2,2′azobis(2-methylpropionitrile) (AIBN) as initiator. Both bimetallic iron–palladium (Fe–Pd) and titania (TiO₂) nanoparticles (NP) were anchored on the grafted nanofibers via the carboxylate groups by in situ and ex situ synthesis. The Fe–Pd and nitrogen-doped TiO₂ nanoparticles were subsequently used for dechlorination and oxidation of target pollutants (dieldrin, chlorpyrifos, diuron, and fipronil) to benign products. Structural and chemical characterizations of the composites were done using various techniques. These include surface area and porosity analyzer (ASAP) using the technique by Brunner Emmett Teller (BET), Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscope (TEM) analyses were done. After dechlorination, the transformation products (TPs) for dieldrin, chlorpyrifos, diuron, and fipronil were obtained and identified using two-dimensional gas chromatography (time-of-flight) with a mass spectrometer detector (GCxGC-TOFMS). Analysis of total organic carbon (TOC) was carried out and used to extrapolate percentage mineralization. Experimental results showed that dechlorination efficiencies of 96, 93, 96, and 90 % for 1, 2, 2, and 3 h treatment period were respectively achieved for 5 ppm solutions of dieldrin, chlorpyrifos, diuron, and fipronil. The dechlorination of dieldrin, diuron, and fipronil follows first-order kinetics while that of chlorpyrifos followed pseudo-first order. Mineralization performance of 34 to 45 % were recorded when Fe–Pd was used, however upon electrospinning, doping, and grafting (Ag/PAN/PVDF-g-PAA-TiO₂/Fe–Pd composite); it significantly increased to 99.9999 %. This composite reveals great potential for dechlorination and mineralization of pesticides in contaminated water.     

Concentration levels and congener profiles of polychlorinated biphenyls, pentachlorobenzene, and hexachlorobenzene in commercial pigments

The concentration levels and congener profiles of polychlorinated biphenyls (PCBs), pentachlorobenzene (PeCBz), and hexachlorobenzene (HxCBz) were assessed in commercially available organic pigments. Among the azo-type pigments tested, PCB-11, which is synthesized from 3,3′-dichlorobendizine, and PCB-52, which is synthesized from 2,2′,5,5′-tetrachlorobendizine, were the major congeners detected. It is speculated that these were byproducts of chlorobendizine, which has a very similar structure. The total PCB concentrations in this type of pigment ranged from 0.0070 to 740 mg/kg. Among the phthalocyanine-type pigments, highly chlorinated PCBs, mainly composed of PCB-209, PeCBz, and HxCBz were detected. Their concentration levels ranged from 0.011 to 2.5 mg/kg, 0.0035 to 8.4 mg/kg, and 0.027 to 75 mg/kg, respectively. It is suggested that PeCBz and HxCBz were formed as byproducts and converted into PCBs at the time of synthesizing the phthalocyanine green. For the polycyclic-type pigments that were assessed, a distinctive PCB congener profile was detected that suggested an impact of their raw materials and the organic solvent used in the pigment synthesis. PCB pollution from PCB-11, PCB-52, and PCB-209 pigments is of particular concern; therefore, the monthly variations in atmospheric concentrations of these pollutants were measured in an urban area (Sapporo city) and an industrial area (Muroran city). The study detected a certain level of PCB-11, which is not included in PCB technical mixtures, and revealed continuing PCB pollution originating from pigments in the ambient air.     

Remediation of DDTs contaminated soil in a novel Fenton-like system with zero-valent iron

Application of a novel Fenton-like system with zero-valent iron, EDTA and Air (ZVI/EDTA/Air) was investigated to degrade dichlorodiphenyltrichloroethane (DDT), dichlorodiphenyldichloroethane, and dichlorodiphenyldichloroethylene (DDE) in the actual contaminated soil from an organochlorine pesticide site. It was found DDTs in the soil were effectively degraded by the system at room temperature, ambient atmosphere pressure and near neutral pH. The dosages of EDTA and ZVI were the dominant factors influencing the removal of contaminants. An increase of EDTA from 0.05 to 0.2 mM and ZVI from 1 to 5 g L^?1 improved the removal of the contaminants significantly. However, excessive amount of EDTA led to a negative effect on the degradation process. Meanwhile, EDTA was simultaneously degraded so as to avoid the secondary pollution risk on soil remediation. Only a small amount of 4,4′-DDE and 2,2-bis(4-chlorophenyl)-1-chloroethylene (4,4′-DDMU) generated as the intermediates of DDT degradation during the process. Our investigation suggests that the Fenton-like system is a promising alternative for remediation of organochlorine pesticides contaminated soils.     

PCB 77 dechlorination products modulate pro-inflammatory events in vascular endothelial cells

Persistent organic pollutants such as polychlorinated biphenyls (PCBs) are associated with detrimental health outcomes including cardiovascular diseases. Remediation of these compounds is a critical component of environmental policy. Although remediation efforts aim to completely remove toxicants, little is known about the effects of potential remediation byproducts. We previously published that Fe/Pd nanoparticles effectively dechlorinate PCB 77 to biphenyl, thus eliminating PCB-induced endothelial dysfunction using primary vascular endothelial cells. Herein, we analyzed the toxic effects of PCB congener mixtures (representative mixtures of commercial PCBs based on previous dechlorination data) produced at multiple time points during the dechlorination of PCB 77 to biphenyl. Compared with pure PCB 77, exposing endothelial cells to lower chlorinated PCB byproducts led to improved cellular viability, decreased superoxide production, and decreased nuclear factor kappa B activation based on duration of remediation. Presence of the parent compound, PCB 77, led to significant increases in mRNA and protein inflammatory marker expression. These data implicate that PCB dechlorination reduces biological toxicity to vascular endothelial cells.     

Kinetics and pathways for the debromination of polybrominated diphenyl ethers by bimetallic and nanoscale zerovalent iron: effects of particle properties and catalyst

Polybrominated diphenyl ethers (PBDEs) are recognized as a new class of widely-distributed and persistent contaminants for which effective treatment and remediation technologies are needed. In this study, two kinds of commercially available nanoscale Fe⁰ slurries (Nanofer N25 and N25S), a freeze-dried laboratory-synthesized Fe⁰ nanoparticle (nZVI), and their palladized forms were used to investigate the effect of particle properties and catalyst on PBDE debromination kinetics and pathways. Nanofers and their palladized forms were found to debrominate PBDEs effectively. The laboratory-synthesized Fe⁰ nanoparticles also debrominated PBDEs, but were slower due to deactivation by the freeze-drying and stabilization processes in the laboratory synthesis. An organic modifier, polyacrylic acid (PAA), bound on N25S slowed PBDE debromination by a factor of three to four compared to N25. The activity of palladized nZVI (nZVI/Pd) was optimized at 0.3 Pd/Fe wt% in our system. N25 could debrominate selected environmentally-abundant PBDEs, including BDE 209, 183, 153, 99, and 47, to end products di-BDEs, mono-BDEs and diphenyl ether (DE) in one week, while nZVI/Pd (0.3 Pd/Fe wt%) mainly resulted in DE as a final product. Step-wise major PBDE debromination pathways by unamended and palladized Fe⁰ are described and compared. Surface precursor complex formation is an important limiting factor for palladized Fe⁰ reduction as demonstrated by PBDE pathways where steric hindrance and rapid sequential debromination of adjacent bromines play an important role.     

Catalytic dechlorination kinetics of p-dichlorobenzene over Pd/Fe catalysts

p-Dichlorobenzene (p-DCB) was dechlorinated using Pd/Fe bimetallic catalytic reductants synthesized by chemical deposition. Batch experiments demonstrated that the Pd/Fe bimetallic particles could effectively dechlorinate p-DCB, p-DCB and its intermediate chlorobenzene were removed completely at a Pd loading of 0.02% (weight ratio of Pd to Fe) and Pd/Fe power to solution ratio about 4g 75 ml-1 in 90 min. Dechlorination was affected by various factors such as the reaction temperature, pH, Pd loading percentage over Fe and the introduction of Pd/Fe catalysts et al. Chlorobenzene represents partially stable dechlorinated intermediates in the generation of benzene and part of p-DCB was dechlorinated to benzene indirectly on the surface of Pd/Fe. The dechlorination of p-DCB took place on the surface of the Pd/Fe bimetallic particles in a pseudo-first-order reaction, the activation energy of the dechlorination reaction was determined to be 80.0 kJ mol-1 at the temperature range of 287-313 K.     

Degradation of pentachlorobiphenyl by a sequential treatment using Pd coated iron and an aerobic bacterium (H1)

The reductive dechlorination and biodegradation of 2,2^′4,5,5^′-pentachlorobiphenyl (PCB#101) was investigated in a laboratory-scale. Palladium coated iron (Pd/Fe) was used as a catalytic reductant for the chemical degradation of 2,2^′4,5,5^′-pentachlorobiphenyl, and an aerobic bacteria was used for biodegradation following the chemical reaction in this study. Dechlorination was affected by several factors such as Pd loading, initial soil pH and the amount of Pd/Fe used. The results showed that higher Pd loading, higher dosage of Pd/Fe and slightly acid condition were beneficial to the catalytic dechlorination of 2,2^′,4,5,5^′-pentachlorobiphenyl. In laboratory batch experiments, 2,2^′4,5,5^′-pentachlorobiphenyl was reduced in the presence of Pd/Fe bimetal, which was not further degraded by aerobic bacteria. 2,2^′,4-trichlorobiphenyl (PCB#17), a reduction product from 2,2^′4,5,5^′-pentachlorobiphenyl, was readily biodegraded in the presence of a aerobic bacterial strain. It is suggested that an integrated Pd/Fe catalytic reduction-aerobic biodegradation process may be a feasible option for treating PCB-contaminated soil.     

Thermal desorption of polychlorobiphenyls from contaminated soils and their hydrodechlorination using Pd- and Rh-supported catalysts

This paper reports about a combined technology for soil remediation from PCBs using the thermal desorption technique coupled with the catalytic hydrogenation of recovered PCBs. The reactor is a bench scale rotating desorption furnace through which nitrogen is flushed and used as carrier gas of desorbed PCBs. The latter are condensed into an hexane or hexane-acetone (1:1 v/v) solution that is then hydrogenated using phosphate-supported Pd or Rh as catalyst. The analysis of the treated soil, under variable operative conditions (temperature and desorption time), shows that the total (99.8%) decontamination from PCBs occurs. The recovery yield of the desorbed PCBs is better than 75% and the subsequent hydrogenation reaches 63% of the collected PCBs in 5h or 100% in 12h.     

Characterization of PBDEs in soils and vegetations near an e-waste recycling site in South China

The concentration and composition of PBDEs in the soils and plants near a typical e-waste recycling site in South China were investigated. The total concentration of PBDEs (ΣPBDEs) in soil ranged from 4.8 to 533 ng/g dry wt. The ΣPBDEs in vegetation were from 2.1 to 217 ng/g dry wt. For the vegetable, the highest concentration of 19.9 ng/g dry wt. was observed in the shoot of Brassica alboglabra L. BDE 209 was the predominant congener in all samples. In comaprison with other e-waste contaminated sites in China, lower concentrations of PBDEs and higher concentrations of PCBs were observed in both soils and plants suggesting different e-waste types involved in the present study. The PBDEs contaminated vegetables around the e-waste dismantling site may pose a potential health risk to the local inhabitants.