医疗垃圾高压蒸汽消毒器设计

医疗垃圾是一种具有急性生物危害性的危险废物。医疗垃圾高压蒸汽消毒法是一种以饱和蒸汽或过热蒸汽为工质的二次污染物少、简便有效、投资省、运行费用低的处理方法。本文以湖南省长沙市为例，选132℃，200kPa的过热蒸汽为工质，设计了一种用于医疗垃圾集中处理的高压蒸汽消毒器，并对其运行过程作了详细分析。     

医疗垃圾高压蒸汽消毒器设计

医疗垃圾是一种具有急性生物危害性的危险废物。医疗垃圾高压蒸汽消毒法是一种以饱和蒸汽或过热蒸汽为工质的二次污染物少、简便有效、投资省、运行费用低的处理方法。本文以湖南省长沙市为例 ,选 13 2℃ ,2 0 0kPa的过热蒸汽为工质 ,设计了一种用于医疗垃圾集中处理的高压蒸汽消毒器 ,并对其运行过程作了详细分析     

医疗垃圾热解焚烧实验研究

医疗垃圾是一种对环境危害极大的危险废弃物。用一种固定炉排炉热解焚烧系统，对广州市部分医院的医疗垃圾进行了热解焚烧及尾气净化试验，并对焚烧工况、烟气中主要的污染物含量及灰渣的灼减率进行分析。分析结果表明：稳定运行时炉膛平均温度在850℃左右，二燃室平均温度在1000℃以上；尾气中CO、NOx，HCI和SO2浓度分别为：71mg／m^3、125mg／m^3、27．8mg／m^3和21mg／m^3，灰渣的灼减率为2．7％。均远远低于标准限值。     

垃圾填埋场渗滤液处理工艺研究进展

介绍了垃圾渗滤液的来源和特点，结合近些年的工程实际和实验研究，主要综述了垃圾渗滤液的处理方案和技术，包括回灌法、土地处理法、物化法、生物法以及其他处理方法，在比较这些方法的基础上提出了一些建议。     

垃圾填埋渗滤液的环境污染与处理

讨论了垃圾渗滤液对地下水、土壤及生态系统的污染危害，介绍了生物处理法、物化处理法等各种对垃圾渗滤液处理的工艺原理、处理效果及优缺点。一般，一种工艺很难将垃圾渗滤液处理达标，或者处理成本太贵，采用以生物处理为主，物化方法为预处理或后处理的组合工艺，是目前对垃圾渗滤液处理非常值得推荐的方法。     

胶南城市生活垃圾处置探讨

针对城市生活垃圾与日俱增的现实，比较了几种生活垃圾处理方法的优缺点，并在胶南市目前生活垃圾现状和处理特点的基础上作了调查分析，提出了垃圾先分类收集，再分别进行卫生填埋和焚烧处理的垃圾处理资源化途径。     

焚烧炉医疗垃圾输送装置

焚烧炉医疗垃圾输送装置是专门为医疗垃圾焚烧炉研究设计的配套上料设备。具有体积小，操作方便，实现全自动控制等优点。成功地替代了人工上料方式，有效避免了操作者与物料的直接接触。上料速度均匀可调，有利于保证和提高焚烧效率。清洗、消毒方便，符合有关规范要求。     

有机垃圾的处理和资源化技术进展

有机垃圾具有易腐烂、热值低、有机质含量丰富等特点，常规的填埋和焚烧难以妥善处理。文章在分析各类有机垃圾组成和特性的基础上，认为堆肥化处理、厌氧发酵和综合利用应是有机垃圾处理和处置的发展趋势，这不仅有利于消除污染、保护环境，还能最大程度地实现物质和能量的自然循环。     

医疗垃圾热解焚烧实验研究

医疗垃圾是一种对环境危害极大的危险废弃物.用一种固定炉排炉热解焚烧系统,对广州市部分医院的医疗垃圾进行了热解焚烧及尾气净化试验,并对焚烧工况、烟气中主要的污染物含量及灰渣的灼减率进行分析.分析结果表明:稳定运行时炉膛平均温度在850℃左右,二燃室平均温度在1000℃以上;尾气中CO、NOx、HCl和SO2浓度分别为:71mg/m3、125 mg/m3、27.8 mg/m3和21 mg/m3,灰渣的灼减率为2.7%.均远远低于标准限值.     

医疗废物排放统计变量的选择及排放系数的确定

为解决医疗行业废物排放量核定难的问题，通过对医疗机构废物产生量的调查、统计、分析，在确定医疗废物排放统计变量的基础上，得出相应的医疗废物排放系数，以供排污申报医疗废物排放量的核定。     

危险废物回转窑焚烧系统的工艺设计

介绍杭州市危险废物回转窑焚烧处理示范工程的一期规模、工艺流程及主要设备的设计方法。     

三峡库区垃圾污染现状及治理技术

如何搞好三峡库区的生态环境保护已成为全世界关注的课题，介绍了库区生活垃圾污染现状，并根据库区生活垃圾的特性及当地的经济发展和自然条件，对三峡库区生活垃圾的综合治理进行了系统研究，建议三峡库区垃圾实行分类收集，系统地将城区生活垃圾的管理、收集、运输和处理等各个环节有机结合起来，逐步建立起高效完善的现代化城市生活垃圾管理体系。重点介绍了准好氧垃圾卫生填埋技术和CBS（Cental Bilolgical System）城市生活垃圾高效菌种堆肥技术，秭归、巴东等烧煤区生活垃圾含无机物成分较高，建议选用准好氧填埋技术；涪陵、开县、忠县等燃气区生活垃圾有机物成分较高，已具备一定的资源化价值，高效菌种CBS堆肥技术在燃气区具有广阔的前景。     

Molten salt oxidation: a versatile and promising technology for the destruction of organic-containing wastes

Molten salt oxidation (MSO), a robust thermal but non-flame process, has the inherent capability of destroying organic constituents in wastes, while retaining inorganic and radioactive materials in situ. It has been considered as an alternative to incineration and may be a solution to many waste disposal problems. The present review first describes the history and development of MSO, as well as design and engineering details, and then focuses on reaction mechanisms and its potential applications in various wastes, including hazardous wastes, medical wastes, mixed wastes, and energetic materials. Finally, the current status of and prospects for the MSO process and directions for future research are considered.     

Medical Waste Disposal

Medical (biomedical) wastes pose numerous potential health and safety hazards. In addition to their infectious and toxic characteristics, the highly variable and inconsistent nature of medical waste streams has increased public concern about storage, treatment, transportation, and ultimate disposal.

In recent years, techniques have been developed to reduce human exposure to the toxic and infectious components of medical wastes. The most commonly used techniques include internal segregation, containment, and incineration. Other common techniques include grinding, shredding, and disinfection, e.g., autoclaving and chemical treatment followed by landfilling.

Of all the available technologies for medical waste treatment and disposal, incineration has been found to be the most effective method overall for destroying infectious and toxic material, volume reduction, and weight reduction in the medical waste stream, incineration destroys the broadest variety of medical waste constituents and can recover energy from the medical waste stream. Incineration also is an appropriate alternative to burial of human pathological remains.     

医疗废弃物焚烧挥发性氯含量与热值测试与估算

通过测定上海某医疗废弃物处置公司设定燃烧工况条件下某时间段内烟气中HC l的平均排放速率,估算出上海地区医疗垃圾废物中的可燃烧转化氯含量在2.33%~2.64%左右;通过测定各较小采样时间段(2 m in)的烟气HC l浓度测定发现批次进料造成烟气中HC l浓度近4倍的波动,通过初步的热平衡估算得到医疗废弃物的热值大致在21.8 M J/kg,得到的结果可为我国医疗废弃物的焚烧工艺设计提供基础依据。     

Vermicomposting of winery wastes: a laboratory study

In Mediterranean countries, millions of tons of wastes from viticulture and winery industries are produced every year. This study describes the ability of the earthworm Eisenia andrei to compost different winery wastes (spent grape marc, vinasse biosolids, lees cakes, and vine shoots) into valuable agricultural products. The evolution of earthworm biomass and enzyme activities was tracked for 16 weeks of vermicomposting, on a laboratory scale. Increases in earthworm biomass for all winery wastes proved lower than in manure. Changes in hydrolytic enzymes and overall microbial activities during the vermicomposting process indicated the biodegradation of the winery wastes. Vermicomposting improved the agronomic value of the winery wastes by reducing the C:N ratio, conductivity and phytotoxicity, while increasing the humic materials, nutrient contents, and pH in all cases. Thus, winery wastes show potential as raw substrates in vermicomposting, although further research is needed to evaluate the feasibility of such wastes in large-scale vermicomposting systems.     

煤矸石微生物脱硫试验研究

采用本试验室自主分离筛选出的氧化硫硫杆菌,通过煤矸石浸泡的微生物脱硫和煤矸石柱状淋洗的微生物脱硫试验,研究该菌株对大武口高硫煤矸石的脱硫效果.煤矸石浸泡试验表明,微生物对煤矸石脱硫效果明显,浸泡煤矸石2 h后脱硫量达0.79 g/L,脱硫率达24.5%,21 d持续稳定升高,脱硫率达28.3%,为煤矸石的快速脱硫提供了技术支持.煤矸石柱状淋洗试验表明,前9 d是氧化硫硫杆菌脱硫的活跃期,该菌株有较高的氧化煤矸石的能力.     

Vermicomposting of Winery Wastes: A Laboratory Study

In Mediterranean countries, millions of tons of wastes from viticulture and winery industries are produced every year. This study describes the ability of the earthworm Eisenia andrei to compost different winery wastes (spent grape marc, vinasse biosolids, lees cakes, and vine shoots) into valuable agricultural products. The evolution of earthworm biomass and enzyme activities was tracked for 16 weeks of vermicomposting, on a laboratory scale. Increases in earthworm biomass for all winery wastes proved lower than in manure. Changes in hydrolytic enzymes and overall microbial activities during the vermicomposting process indicated the biodegradation of the winery wastes. Vermicomposting improved the agronomic value of the winery wastes by reducing the C:N ratio, conductivity and phytotoxicity, while increasing the humic materials, nutrient contents, and pH in all cases. Thus, winery wastes show potential as raw substrates in vermicomposting, although further research is needed to evaluate the feasibility of such wastes in large-scale vermicomposting systems.     

生活垃圾固结技术及其安全性研究

针对生活垃圾产生量逐年增多的趋势，采用新型固化技术对陈腐生活垃圾进行固结，并对其固结效果和安全性进行研究。研究结果表明：本固结技术可使生活垃圾固结体28d强度达38MPa以上，其耐久性能诸如抗冻性能、耐水性能、抗干湿循环能力和抗硫酸盐侵蚀性能较为优越。并且其固结体重金属溶出量亦满足国家标准，即生活垃圾中的重金属离子得到有效的束缚和稳定固化。     

PVC废物及其处理技术

PVC广泛应用于工业和日常生活中 ,PVC废物的产生量将会在将来一段时间内持续增长 ,对PVC废物处理处置问题研究成为固体废物处理处置的一个方向。目前 ,PVC废物还缺乏系统、完善的管理手段和处理技术。本文在分析PVC废物特点其环境潜在危害特性的基础上 ,比较分析各种PVC废物处理技术的优势和存在的问题 ,及国内外在PVC废物处理处置方面的具体实践 ,以期探讨PVC废物的处理对策并提出今后PVC废物处理的发展趋势和研究方向