When is a soil remediated? Comparison of biopiled and windrowed soils contaminated with bunker-fuel in a full-scale trial

A six month field scale study was carried out to compare windrow turning and biopile techniques for the remediation of soil contaminated with bunker C fuel oil. End-point clean-up targets were defined by human risk assessment and ecotoxicological hazard assessment approaches. Replicate windrows and biopiles were amended with either nutrients and inocula, nutrients alone or no amendment. In addition to fractionated hydrocarbon analysis, culturable microbial characterisation and soil ecotoxicological assays were performed. This particular soil, heavy in texture and historically contaminated with bunker fuel was more effectively remediated by windrowing, but coarser textures may be more amendable to biopiling. This trial reveals the benefit of developing risk and hazard based approaches in defining end-point bioremediation of heavy hydrocarbons when engineered biopile or windrow are proposed as treatment option.     

不同处理条件对石油污染土壤植物修复的影响

针对石油烃植物修复过程中的主要影响因素,研究了不同植物种类、不同土壤调理剂和菌剂使用等不同条件对土壤中石油烃植物修复效果的影响.结果表明,不同种类的植物修复可使总石油烃的年降解率达到37.8％ ～ 73.98％,其中大豆和碱蓬具有较好的修复效果;3种不同土壤调理剂对石油烃污染土壤修复的效果为商业添加剂＞牛粪＞蛭石;先微生物修复后种植植物的处理要优于单独的微生物修复及微生物、植物修复同步进行的处理.     

Plant aided bioremediation in the vadose zone: model development and applications

Phytoremediation has the potential to enhance clean up of land contaminated by various pollutants. A mathematical model that includes a two-fluid phase flow model of water flow as well as a two-region soil model of contaminant reactions was developed and applied to various bioremediation scenarios in the unsaturated zone, especially to plant-aided bioremediation. To investigate model behavior and determine the main parameters and mechanisms that affect bioremediation in unplanted and planted soils, numerical simulations of theoretical scenarios were conducted before applying the model to field data. It is observed from the results that parameters affecting the contaminant concentration in the water phase, such as aqueous solubility, the octanol-water partition coefficient, and organic carbon content of the soil controlled the contaminant fate in the vadose zone. Simulation using the developed model also characterized the fate and transport of the contaminants both in planted and unplanted soils satisfactorily for field applications. Although phytoremediation has the potential for remediation of contaminated soils, results from both modeling and field studies suggested that plants may not always enhance the remediation efficiency when the soil already has a high microbial concentration, when the contaminant bioavailability is low, or when the overall reaction is mass transfer-limited. Therefore, other steps to increase contaminant bioavailability are needed in phytoremediation applications; natural purification mechanisms such as aging, volatilization, and natural bioremediation should be considered to maximize the plant effect and minimize the cost.     

阿特拉津土壤污染修复菌剂载体材料的筛选与应用

阿特拉津是长残留除草剂,其环境行为和生物修复技术已成为有机污染控制领域的研究热点。以廉价的高岭土、凹凸棒土和腐殖酸为载体材料,采用正交实验,把功能菌存活率作为目标性状,参考材料成球率,筛选出性能较好的高岭土、凹凸棒土和腐殖酸质量配比3种,分别为1∶0.5∶0.5(A3B2C1)、0.5∶0∶0.5(A2B3C1)和1∶0∶1(A3B1C2);在温度和紫外线耐受力实验中,A3B2C1材料配比更能够有效提升功能菌在高温和紫外线作用下的存活率,即载体中高岭土、凹凸棒土和腐殖酸质量比为1∶0.5∶0.5时效果最佳;利用A3B2C1载体材料配比制备菌剂,进行室内土壤修复实验,35 d时0.1%和0.5%载体菌剂添加量修复土壤中阿特拉津完全降解,而2个游离菌修复土壤中残留率均16%,0.1%载体菌剂添加量修复过程中土壤微生物Shannon多样性指数和均匀度变化幅度较其他修复方式小,有利于土壤微生物生态系统的平衡,因此0.1%载体菌剂添加量修复效果为最优。     

Prospects in the bioremediation of petroleum hydrocarbon contaminants from hypersaline environments: A review

Hypersaline environments are underappreciated and are frequently exposed to pollution from petroleum hydrocarbons. Unlike other environs, the high salinity conditions present are a deterrent to various remediation techniques. There is also production of hypersaline waters from oil-polluted ecosystems which contain toxic hydrophobic pollutants that are threat to public health, environmental protection, and sustainability. Currently, innovative advances are being proposed for the remediation of oil-contaminated hypersaline regions. Such advancements include the exploration and stimulation of native microbial communities capable of utilizing and degrading petroleum hydrocarbons. However, prevailing salinity in these environments is unfavourable for the growth of non-halophylic microorganisms, thus limiting effective bioremediation options. An in-depth understanding of the potentials of various remediation technologies of hydrocarbon-polluted hypersaline environments is lacking. Thus, we present an overview of petroleum hydrocarbon pollution in hypersaline ecosystems and discuss the challenges and prospects associated with several technologies that may be employed in remediation of hydrocarbon pollution in the presence of delimiting high salinities. The application of biological remediation technologies including the utilization of halophilic and halotolerant microorganisms is also discussed.

     

Soil microbial parameters and luminescent bacteria assays as indicators for in situ bioremediation of TNT-contaminated soils

In situ bioremediation is increasingly being discussed as a useful strategy for cleaning up contaminated soils. Compared to established ex situ procedures, meaningful and reliable approaches for monitoring the remediation processes and their efficiency are of special importance. The subject of this study was the significance of two bioassays for monitoring purposes. The work was performed within the scope of a research project on the in situ bioremediation of topsoil contaminated with 2,4,6-trinitrotoluene (TNT). To evaluate changes within different experimental fields during a 17-month remediation period, the results of soil microbial assays and luminescent bacteria assays were compared with chemical monitoring data. The luminescent bacteria assays showed a significant reduction of the water-soluble soil toxicants in the treated fields. This bioassay proved to be a sensitive screening indicator of toxicity and may effectively aid the ecotoxicological interpretation of chemical monitoring data. Microbial biomass (C(mic)), the metabolic quotient (qCO2), and the ratio of microbial to organic carbon (C(mic)/C(org)) showed a highly significant correlation with total concentrations of TNT in the soil. But, in contrast to luminescent bacteria assays, this approach did not reveal any recovery of the soil at the end of the remediation period. There is clear evidence for persistent adverse effects of chronic TNT contamination on the site-specific microbial community and the local carbon cycle in the soil. The study clearly exhibits the differences between, as well as the complementary value of both bioassay approaches for monitoring short-term and long-term effects of soil contamination and the efficiency of remediation.     

Bioremediation of oil-contaminated soil using Candida catenulata and food waste

Even though petroleum-degrading microorganisms are widely distributed in soil and water, they may not be present in sufficient numbers to achieve contaminant remediation. In such cases, it may be useful to inoculate the polluted area with highly effective petroleum-degrading microbial strains to augment the exiting ones. In order to identify a microbial strain for bioaugmentation of oil-contaminated soil, we isolated a microbial strain with high emulsification and petroleum hydrocarbon degradation efficiency of diesel fuel in culture. The efficacy of the isolated microbial strain, identified as Candida catenulata CM1, was further evaluated during composting of a mixture containing 23% food waste and 77% diesel-contaminated soil including 2% (w/w) diesel. After 13 days of composting, 84% of the initial petroleum hydrocarbon was degraded in composting mixes containing a powdered form of CM1 (CM1-solid), compared with 48% of removal ratio in control reactor without inoculum. This finding suggests that CM1 is a viable microbial strain for bioremediation of oil-contaminated soil with food waste through composting processes.     

Microbial reduction of sulfate injected to gas condensate plumes in cold groundwater

Despite a rapid expansion over the past decade in the reliance on intrinsic bioremediation to remediate petroleum hydrocarbon plumes in groundwater, significant research gaps remain. Although it has been demonstrated that bacterial sulfate reduction can be a key electron accepting process in many petroleum plumes, little is known about the rate of this reduction process in plumes derived from crude oil and gas condensates at cold-climate sites (mean temperature <10 degrees C), and in complex hydrogeological settings such as silt/clay aquitards. In this field study, sulfate was injected into groundwater contaminated by gas condensate plumes at two petroleum sites in Alberta, Canada to enhance in-situ bioremediation. In both cases the groundwater near the water table had low temperature (6-9 degrees C). Monitoring data had provided strong evidence that bacterial sulfate reduction was a key terminal electron accepting process (TEAP) in the natural attenuation of dissolved hydrocarbons at these sites. At each site, water with approximately 2000 mg/L sulfate and a bromide tracer was injected into a low-sulfate zone within a condensate-contaminant plume. Monitoring data collected over several months yielded conservative estimates for sulfate reduction rates based on zero-order kinetics (4-6 mg/L per day) or first-order kinetics (0.003 and 0.01 day(-1)). These results favor the applicability of in-situ bioremediation techniques in this region, under natural conditions or with enhancement via sulfate injection.     

Bioavailability assessment and environmental fate of polycyclic aromatic hydrocarbons in biostimulated creosote-contaminated soil

When hydrocarbon-contaminated soil is subjected to bioremediation technology, hydrocarbon depletion is typically marked by an initially rapid reduction rate. This rate decreases over time and frequently a residual concentration remains in the soil. This kinetic has been attributed primarily to the enrichment of more recalcitrant fractions, as well as to the lack of resting hydrocarbon bioavailability. Thus, at the end of the bioremediation process, a part of the residual hydrocarbon soil concentration represents the non-bioavailable fraction, which is difficult to degrade by microbial populations and which poses a minor hazard. Therefore, determination of the bioavailable fraction in a bioremediation project represents both an estimation of the maximum level of achievable biodegradation, as well as an additional indication of the environmental health hazard. In the present study, aged creosote-contaminated soil was subjected to biostimulation processes, and the bioavailable fraction for several target polycyclic aromatic hydrocarbons (PAHs) was calculated using a mild extraction with cyclodextrines. The amount of PAH extracted corresponded to the desorbing fraction and can be regarded as the bioavailable fraction. The non-desorbing fraction data obtained from this procedure were compared to the remaining PAH concentrations following bioremediation treatment of soil microcosms. These results permitted the establishment of a theoretical biodegradation limit based on the desorbing fraction. In addition, neither accumulation of intermediate metabolites, nor the formation of bound-residues or reduced acute toxicity was observed.     

Bioremediation of soil contaminated with polynuclear aromatic hydrocarbons (PAHs): a review

Polynuclear aromatic hydrocarbons (PAHs) constitute a group of priority pollutants which are present at high concentrations in the soils of many industrially contaminated sites. Criteria established for the removal or treatment or both of soils contaminated with PAHs vary widely within and between nations. The bioremediation of contaminated soils with in-situ, on-site, and bioreactor techniques is reviewed, together with the factors affecting PAH degradation. Current in-situ remediation techniques are considered ineffective for the removal of most PAHs from contaminated soil. On-site 'landforming' methods have been used successfully (and within a reasonable period of time) to degrade only those PAHs with three or fewer aromatic rings. Bioreactors have proved most effective for soil remediation, since conditions for enhanced degradation can be achieved most readily. However, bioreactors are still at the development stage, and further research is required to optimise their efficiency and economy for routine use. Degradation of the more recalcitrant high-molecular-weight PAHs is contaminated soil has not been particularly successful to date. Further research needs are identified to help develop bioremediation into a most cost-effective technology. The importance of full site assessments and treatability studies for successful application in the field is emphasised.     

Bioremediation process on Brazil shoreline

GOAL, SCOPE AND BACKGROUND: Bioremediation technique can be considered a promising alternative to clean oil spills using microbial processes to reduce the concentration and/or the toxicity of pollutants. To understand the importance of this work we must know that there is only little research performed to date using bioremediation techniques to clean oil spills in tropical countries. So, the main objective of this work is to analyze the behavior of a laboratory's bioremediation test using nutrients on coastal sediments. METHODS: The bioremediation process is followed through geochemical analysis during the tests. This organic material is analyzed by medium pressure liquid chromatography (MPLC), gas chromatography/flame ionization detection (GC/FID) and gas chromatography/ mass spectrometry. By microbial counting, the number of total bacteria and degrading bacteria is determined during the experiments, in order to confirm the effectiveness of the bioremediation process. The seawater obtained throughout the bioremediation process is analyzed for nutrients grade (phosphate and ammonium ions) and also for its toxicity (Microtox tests) due the presence of hydrocarbons and fertilizer. RESULTS: The results from the geochemical analyses of the oil show a relative decrease in the saturated hydrocarbon fraction that is compensated by a relative enrichment on polar compounds. It's confirmed by the fingerprint evaluation where it is possible to see a complete reduction of the normal alkanes followed by isoprenoids. Seawater analysis done by toxicity and nutrients analysis, such as microbial counting (total and degrading bacteria), confirm the fertilizer effectiveness during the bioremediation process. DISCUSSION: Results from simulating test using NPK, a low-price plant fertilizer, suggest that it's able to stimulate the degradation process. Results from medium pressure liquid chromatography (MPLC), done at two different depths (surface and subsurface), show different behavior during the biodegradation process where the later is seen to be more susceptible to microbial attack. Data from bioremediation unit shows a bigger reduction of the saturated fraction, followed by some smaller reduction of aromatic fractions, compensated by a relative increase from polar compounds (NSO). n-C17/pristane, n-C18/ fitane and pristane/fitane rates show constant values for the unity control, different from bioremediation samples which have a significant reduction, especially on subsurface areas, where a strong fall in the rates, seen to be reduced to zero over twenty days, had occurred during the first ten days. However, sample surfaces are reduced to zero in thirty days of experiments, proving that biodegradation is better on subsurfaces. Gaseous chromatography/mass spectrometry (CG/MS) analysis shows constant values to cyclic biomarker rates and aromatic compounds, suggesting that the biodegradation process is not strong enough to reduce these composites. Microbial analysis shows a reduction on heterotrophic (total bacteria) number from control unit, probably because the bacteria uses the spill oil like carbon source and energy. However, the number increases on bioremediation unit, because it uses NPK like a biostimulator. The hydrocarbonoclastic number isn't enough on the first moment, but it's detected after 30 days and quantified in all units, showing big values especially in bioremediation. Toxicity tests confirm that NPK fertilizer does not intoxicate the shoreline during the application of the bioremediation technique. Some nutrient concentration shows high values of ammonium and phosphate per bioremediation unit, reducing by the end of the experiment. CONCLUSIONS: Results reached the goal, finding a proper nutrient (NPK fertilizer) to stimulate the biodegradation process, growing bacteria responsible for reducing impact-contaminated coast ambient by oil spills. Chemical analysis of oil shows a reduction in the saturated fraction with a relative enrichment in polar composites (NSO) and the aromatic fraction from oil remaining constant. Subsurface samples show more biodegradation than surface samples, probably because the first one has higher humidity. Linear alcanes are more biodegraded than isoprenoids, confirming the biodegradation susceptibility order. Saturated cyclic biomarkers and aromatic compounds show constant behavior maybe because the nutrients or time was not enough for microorganismic attack. Fertilizer does not demonstrate any toxic effects in local biota so that it does not compromise the technique applicability and the environment is not saturated by nutrients during the simulation, especially since the coastal environment is an open system affected daily by tides. Therefore, bioremediation tests can be classified as moderate, reaching level 5 in the classification scale by Peters & Moldowan (1993). RECOMMENDATIONS AND PERSPECTIVES: The use of marine environment by the petroleum industry on exploration, production and transportation operation, transform this oil to become the most important pollutant in the oceans. Bioremediation is an important technique used to clean spilled oil impacting on shorelines, accelerating the biodegradation process by using fertilizer growing the microorganisms responsible for decontaminating the environment. We recommend confirming the efficiency of NPK nutrient used on bioremediation simulating experiments on beaches, while monitoring the chemical changes long-term. NPK fertilizer can be used to stimulate the biodegradation process on shoreline impacted by spilled oil.     

石油污染土壤的植物与微生物修复技术

石油污染土壤的生物修复技术具有成本低、简便高效、对环境影响小等优点,正逐步成为石油污染治理研究的热点领域,具有广阔的发展前景.介绍了我国的石油污染概况及生物修复技术在石油污染治理中的应用,重点对石油污染土壤的微生物修复、植物修复、植物一微生物联合修复技术的研究进展及各自的优点、局限性进行了综述,并提出了石油污染土壤生物修复技术研究的重点领域.     

Impact of electrokinetic remediation on microbial communities within PCP contaminated soil

Electrokinetic techniques have been used to stimulate the removal of organic pollutants within soil, by directing contaminant migration to where remediation may be more easily achieved. The effect of this and other physical remediation techniques on the health of soil microbial communities has been poorly studied and indeed, largely ignored. This study reports the impact on soil microbial communities during the application of an electric field within ex situ laboratory soil microcosms contaminated with pentachlorophenol (PCP; 100mg kg(-1) oven dry soil). Electrokinetics reduced counts of culturable bacteria and fungi, soil microbial respiration and carbon substrate utilisation, especially close to the acidic anode where PCP accumulated (36d), perhaps exacerbated by the greater toxicity of PCP at lower soil pH. There is little doubt that a better awareness of the interactions between soil electrokinetic processes and microbial communities is key to improving the efficacy and sustainability of this remediation strategy.     

Temporal ecological assessment of oil contaminated soils before and after bioremediation

Ecotoxicity methods were used to assess different soil and oil combinations before, during and after laboratory bioremediation with associated hydrocarbon analysis. Heavy, medium and light crude oil (API gravity 14, 30, and 55) was spiked (ca. 5% w/w) into two sandy soils in the laboratory having organic carbon concentrations of 0.3 (Norwood) and 4.7% (Norwood/Baccto). The earthworm (Eisenia fetida) 14-d lethality assay, the modified Microbics Microtox Solid-Phase assay, and the 14-d plant seed germination and growth assays using corn, wheat and oats, were spiked and tested during a 360-d laboratory remediation. Eisenia was the most sensitive of the three methods utilized with survival increasing throughout bioremediation with fastest toxicity reduction in the high carbon Norwood/Baccto soils where LC50's were 100% or greater at the end of 90-d whereas, > 150-d were required to achieve a similar result in the low carbon soil. Analysis of the undiluted treatments with oily soil alone showed that earthworm survival was high after 90-d in all high organic carbon soils, and after eight months in the low carbon soils, except for the Norwood soil-light oil treatment, which required 360-d to achieve 100% survival. The Microtox assay was less sensitive with EC50's 100% or greater observed after 90-d in high carbon soils and after 240-d for all low carbon soils. After bioremediation, no effects on seed germination were observed, although some plant growth inhibition effects remained. There was no direct correlation between total petroleum hydrocarbon concentrations and toxicity.     

多环芳烃污染土壤的植物与微生物修复研究进展

概括介绍了多环芳烃污染土壤的植物修复、微生物修复和植物 微生物联合修复的原理、优缺点、影响因素及国内外研究进展 ,并对生物修复的未来发展进行了展望     

Mesocosm trials of bioremediation of contaminated soil of a petroleum refinery: comparison of natural attenuation,biostimulation and bioaugmentation

Purpose  

Contamination with petroleum hydrocarbons (PHC) is a global problem with environmental implications. Physico-chemical treatments can be used for soil cleanup, but they are expensive, and can have implications for soil structure and environment. Otherwise, biological remediation treatments are cost-effective and restore soil structure. Several remediation experiments have been carried out in the lab and in the field; however, there is the challenge to achieve as good or better results in the field as in the laboratory. In the ambit of a project aiming at investigating suitable biological remediation approaches for recovering a refinery contaminated soil, we present here results obtained in bioremediation trials. The approaches biostimulation and bioaugmentation were tested, in parallel, and compared with natural attenuation. For this purpose, mesocosm experiments were carried out inside the refinery area, which constitutes a real asset of this work.     

A combined approach of physicochemical and biological methods for the characterization of petroleum hydrocarbon-contaminated soil

Main physicochemical and microbiological parameters of collected petroleum-contaminated soils with different degrees of contamination from DaGang oil field (southeast of Tianjin, northeast China) were comparatively analyzed in order to assess the influence of petroleum contaminants on the physicochemical and microbiological properties of soil. An integration of microcalorimetric technique with urease enzyme analysis was used with the aim to assess a general status of soil metabolism and the potential availability of nitrogen nutrient in soils stressed by petroleum-derived contaminants. The total petroleum hydrocarbon (TPH) content of contaminated soils varied from 752.3 to 29,114 mg kg^?1. Although the studied physicochemical and biological parameters showed variations dependent on TPH content, the correlation matrix showed also highly significant correlation coefficients among parameters, suggesting their utility in describing a complex matrix such as soil even in the presence of a high level of contaminants. The microcalorimetric measures gave evidence of microbial adaptation under highest TPH concentration; this would help in assessing the potential of a polluted soil to promote self-degradation of oil-derived hydrocarbon under natural or assisted remediation. The results highlighted the importance of the application of combined approach in the study of those parameters driving the soil amelioration and bioremediation.     

Evaluation of TCDD biodegradability under different redox conditions

Polychlorinated dibenzo-p-dioxins have been generated as unwanted by-products in many industrial processes. Although their widespread distribution in different environmental compartments has been recognized, little is known about their fate in the ultimate environment sinks. The highly stable dioxin isomer 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) has been called the most toxic compound known to man. In this laboratory microcosm study, TCDD bioavailability was evaluated under five reduction/oxidation (redox) conditions including aerobic biodegradation, aerobic cometabolism, methanogenesis, iron reduction, and reductive dechlorination. Activated sludge and aquifer sediments from a TCDD and a pentachlorophenol (PCP) contaminated site were used as the inocula. Acetate, sludge cake, and cane molasses were used as the primary substrates (carbon sources) in cometabolism and reductive dechlorination microcosms. After a 90-day incubation period, microcosms constructed under reductive dechlorination conditions were the only treatment showing promising remediation results. The highest TCDD degradation rate [up to 86% of TCDD removal (with an initial concentration of 96 microg/kg of soil)] was observed in the microcosms with anaerobic activated sludge as the microbial inocula and sludge cakes as the primary substrates. Except for reductive dechlorination microcosms, no significant TCDD removal was observed in the microcosms prepared under other conditions. Thus, application of an effective primary substrate to enhance the reductive dechlorination process is a feasible method for TCDD bioremediation. Bioremediation expense can be significantly reduced by the supplement of some less expensive alternative substrates (e.g., sludge cakes, cane molasses). Results would be useful in designing a scale-up in situ or on-site bioremediation system such as bioslurry reactor for field application.     

An evaluation of surfactant foam technology in remediation of contaminated soil

Soil contamination is notoriously difficult to treat because the contaminants are often tightly bound to the soil particles. Conventional remediation technologies are becoming less popular due to the high treatment costs. This paper gives a comprehensive overview and evaluation of an emerging promising alternative, surfactant foam technology. Different from other approaches, surfactant foam technology may be designed either to remove contaminants or/and simultaneously act as an augmentation for the existing technologies such as pump-and-treat systems and bioremediation processes to improve the contaminant removal efficiency and cost effectiveness. Encouraging results were achieved from laboratory and field demonstrations. However, as an innovative technology, there are many factors to be investigated with the future development. Special attention is paid to the selection of the most appropriate foaming surfactant and surfactant concentration, which are critical to the success of the implementation of the remediation process and have significant effects on the treatment costs. Moreover, development of predictive mathematical models in for future research is helpful to optimize the remediation process.     

Innovative technologies for contaminated site remediation: focus on bioremediation.

Bioremediation, the process by which hazardous substances are degraded by microorganisms, is at the forefront of a larger group of innovative remediation technologies being applied at hazardous waste sites worldwide. Although the process of bioremediation has been utilized for decades in the field of wastewater engineering, its application to soils and groundwater at hazardous waste sites is fairly new and still undergoing intensive development. This article is intended to provide both an overview of the state of practice of bioremediation in hazardous waste remediation operations, and an inventory of issues to consider when evaluating the use of this technology for a contaminated site. These topics will be the subject matter of a unique Bioremediation Satellite seminar to be broadcast on January 9, 1992. The seminar, a joint venture between the Air and Waste Management Association (A&WMA) and the Hazardous Waste Action Coalition (HWAC), is the first in a series of satellite seminars that will deal with innovative hazardous waste remediation technologies. The intent of these seminars is to design programs which will make hazardous waste practitioners more familiar with innovative remediation technologies so that they will consider using the technologies in future clean-up operations.