Modeling riverine nutrient transport to the Baltic Sea: a large-scale approach

We developed for the first time a catchment model simulating simultaneously the nutrient land-sea fluxes from all 105 major watersheds within the Baltic Sea drainage area. A consistent modeling approach to all these major watersheds, i.e., a consistent handling of water fluxes (hydrological simulations) and loading functions (emission data), will facilitate a comparison of riverine nutrient transport between Baltic Sea subbasins that differ substantially. Hot spots of riverine emissions, such as from the rivers Vistula, Oder, and Daugava or from the Danish coast, can be easily demonstrated and the comparison between these hot spots, and the relatively unperturbed rivers in the northern catchments show decisionmakers where remedial actions are most effective to improve the environmental state of the Baltic Sea, and, secondly, what percentage reduction of riverine nutrient loads is possible. The relative difference between measured and simulated fluxes during the validation period was generally small. The cumulative deviation (i.e., relative bias) [Sigma(Simulated - Measured)/Sigma Measured x 100 (%)] from monitored water and nutrient fluxes amounted to +8.2% for runoff, to -2.4% for dissolved inorganic nitrogen, to +5.1% for total nitrogen, to +13% for dissolved inorganic phosphorus and to +19% for total phosphorus. Moreover, the model suggests that point sources for total phosphorus compiled by existing pollution load compilations are underestimated because of inconsistencies in calculating effluent loads from municipalities.     

Combination of magnetic parameters: an efficient way to discriminate soil-contamination sources (south France)

Biplots combining magnetic parameters allow to identification and differentiation different pollutant emission sources. A major problem in soil pollution is the characterization of the relative contributions of different anthropogenic particles sources. This paper demonstrates the efficiency of magnetic techniques to provide identification and differentiation of contaminating emission sources. About 100 soil samples were collected across a mixed agricultural and industrial area (Crau plain/Berre-Fos basin) in southern France. Nine soil profiles were realized. They are aligned along a transect, from the Mediterranean cost to the north. Measurements of initial magnetic susceptibility (chi) and remanent magnetization (ARM, IRM) have been carried out at room temperature. Several ratios of magnetic parameters were calculated and tested. Bivariate analyses allow to characterize different pollution sources and graphic results suggest three dominant contributions originated from road traffic, airport and steel industry. Moreover, magnetic grain-size discrimination between surface-soil samples and bottom-soil samples is obtained. An increase of hard magnetic components from topsoil towards the bottom of the profiles is evidenced.     

GIS-based source identification and apportionment of diffuse water pollution: perfluorinated compound pollution in the Tokyo Bay basin

To efficiently reduce perfluorinated compound (PFC) pollution, it is important to have an understanding of PFC sources and their contribution to the pollution. In this study, source identification of diffuse water pollution by PFCs was conducted using a GIS-based approach. Major components of the source identification were collection of the monitoring data and preparation of the corresponding geographic information that was extracted from a constructed GIS database. The spatially distributed pollution factors were then explored by multiple linear regression analysis, after which they were visually expressed using GIS. Among the 35 PFC homologues measured in a survey of the Tokyo Bay basin, 18 homologues were analyzed. Pollution by perfluorooctane sulfonate (PFOS) was explained well by the percentage of arterial traffic area in the basin, and the 84% variance of the measured PFOS concentration was explained by two geographic variables, arterial traffic area and population. Source apportionment between point and nonpoint sources was conducted based on the results of the analysis. The contribution of PFOS from nonpoint sources was comparable to that from point sources in several major rivers flowing into Tokyo Bay. Source identification and apportionment using the GIS-based approach was shown to be effective, especially for ubiquitous types of pollution, such as PFC pollution.     

Area-differentiated modelling of excess nutrient and contaminant leaching risks at the river-basin scale using a hydrological approach in India

Application of excess nutrients, such as fertilizers, is a significant and sometimes even major component of groundwater pollution. Diffuse inputs of nutrients and contaminants to the groundwater are related to runoff generated from precipitation on a catchment. This implies that the analysis of diffuse fluxes from the land surface to the groundwater requires an analysis of water fluxes for a catchment. This requires the simulation and modelling of total runoff, groundwater recharge, and plant-available water as a function of the regional interaction of the climate, soil, hydrogeology, topography and land-use conditions in the river basin. A model has been developed for large river basins in India, and has been applied to the Upper Yamuna basin, to quantify the exchange probability of plant-available soil water, which can be taken as a measure to determine the nutrient and contaminant leaching risk of a site. It was found that, with the available large-scale databases and methods, regional patterns of the total runoff could be simulated successfully. In this way, about 75001km² of the total 121000 km² of the Upper Yamuna basin was classified as an area sensitive to nutrient and contaminant leaching.     

Characterization and inventory of PCDD/F emissions from coal-fired power plants and other sources in Taiwan

The objectives of the present study were to quantify (1) the emission factors of a variety of dioxin emission sources; (2) the overall dioxin emission inventory in Taiwan as well as in a major metropolitan (KC area); and (3) the contribution of power plants to the overall PCDD/F emission. To achieve these goals, a total of 95 flue gas samples were collected and analyzed for 17 PCDD/Fs from 20 sources to develop emission factors. The emission factor of PCDD/Fs from coal-fired power plants (0.62 microgI-TEQton(-1)) obtained in this study is considerably higher than the values reported from different countries including UK, USA, and Spain by a factor of 2-265. It means that the air pollution control devices in certain power plants need to be more efficient. The emission data showed that there is a total annual release to air of 6.1 and 95gI-TEQ from major sources in the KC area and Taiwan, respectively. The dominant sources of PCDD/Fs in the KC area are the coal-fired power plants, secondary aluminum smelting, electric arc furnaces, and open burning of rice straw, which contributed for 56%, 17%, 13%, and 3.3% to the total, respectively. However, in Taiwan, the dominant sources of PCDD/Fs are the iron ore sintering, coal-fired power plants, electric arc furnaces, and open burning of rice straw, which contributed for 32%, 28%, 23%, and 8.1% to the total, respectively. The results of this study showed that coal-fired power plants are very significant sources of PCDD/Fs and also provide an important database to assist the decision makers for formulating policies to alleviate dioxin concerns.     

Size distribution and anthropogenic sources apportionment of airborne trace metals in Kanazawa, Japan

Aerosol samples were collected from Kanazawa, Japan to examine the size distribution of 12 elements and to identify the major sources of anthropogenic elements. Key emission sources were identified and, concentrations contributed from individual sources were estimated as well. Concentrations of elements V, Ca, Cd, Fe, Ba, Mg, Mn, Pb, Sr, Zn, Co and Cu in aerosols were determined with ICP-MS. The results showed that Ca, Mg, Sr, Mn, Co and Fe were mainly associated with coarse particles (>2.1 μm), primarily from natural sources. In contrast, the elements Zn, Ba, Cd, V, Pb and Cu dominated in fine aerosol particles (<2.1 μm), implying that the anthropogenic origin is the dominant source. Results of the factor analysis on elements with high EF_Crust values (>10) showed that emissions from waste combustion in incinerators, oil combustion (involving waste oil burning and oil combustion in both incinerators and electricity generation plants), as well as coal combustion in electricity generation plants were major contributors of anthropogenic metals in the ambient atmosphere in Kanazawa. Quantitatively estimated sum of mean concentrations of anthropogenic elements from the key sources were in good agreement with the observed values. Results of this study elucidate the need for making pollution control strategy in this area.     

某矿区土壤和地下水重金属污染调查与评价

为了解湘南某矿区土壤和地下水重金属污染状况，对该矿区东河流域附近重金属污染源进行了调查，同时，对地下水和土壤样品进行了采样分析，结果表明：（1）该矿区东河流域附近的主要污染源有18个，其中有色金属选厂、尾矿库、采矿场和冶炼厂是排放重金属较多的污染源；（2）20个采样点中土壤重金属Pb、Cd、Zn、As和Hg大部分超过国家土壤环境质量标准（GB15618-1995），综合污染指数P综〉1，该矿区主要的重金属污染元素为Cd、As和Hg，且土壤中Cd、Zn和As的含量两两之间存在着极显著的正线性相关关系；（3）重金属元素在土壤中的纵向迁移不明显，该矿区附近20个采样点的地下水并未受到污染，综合污染指数P综〈1。20个采样点地下水Pb、Cd、Zn、As、Hg浓度均能达到地下水质量标准（GB／T14848．9）中的Ⅲ类标准。     

中国主要湖泊营养氮沉降临界负荷的研究

水体营养氮沉降临界负荷是不致使水体产生富营养化的最高氮沉降量。文中探讨了一种依据湖泊氮质量平衡原理计算营养氮沉降临界负荷的方法。用该方法计算表明 ,我国主要湖泊的营养氮沉降临界负荷比较低 ,大部分小于 1keq· hm- 1 · a- 1 ,部分已为目前的氮沉降量或者两者相当接近 ,意味着只接受氮沉降也能导致这些湖泊产生富营养化。但实际统计结果表明 ,氮沉降在导致受工农业生产和生活影响很大的城市和郊区湖泊的水质富营养化的所有氮污染源中所占比例较低 ,而其它来源的氮输入如河道入湖、工业生活废水和农田径流等才是导致富营养化的最主要因素 ,它们的量已远远超过了这些水体可随最高允许氮负荷。因此 ,对控制这些湖泊的水质富营养化而言 ,控制氮沉降并不是目前最紧迫的任务 ,而其它人为污染源的控制才是最急需的。但氮沉降临界负荷在湖泊富营养化的中长远控制中仍具有十分重要的意义。     

机动车污染排放模型研究综述

过去几十年,为了掌握机动车污染排放的规律和特征,向决策者提供科学有效的机动车污染控制措施,研究者们致力于研究机动车污染物排放的物化原理和影响机动车污染的主要因素,并据此建立多种尺度的机动车排放模型,以模拟城市区域或者街道的污染物排放.为了分析机动车的瞬态排放特征,目前的机动车排放模型研究正逐渐从宏观向微观发展,排放测试方法注重获取逐秒的排放数据,排放模型模拟的时间尺度和空间尺度逐步趋向微观.此外,机动车模型研究正趋向与交通模型进行耦合,从而揭示机动车在实际道路交通流中的排放特征.从机动车排放的主要影响因素、机动车排放测试、机动车排放因子模型及机动车排放清单等4个方面综述了国内外机动车排放研究现状和发展动向,对比并评价各种机动车排放模型方法的优缺点和适用范围,对我国的机动车排放模型发展方向进行了展望.     

Preparation of mercury emissions inventory for eastern North America

Point and area inventories of anthropogenic mercury emissions documented by US and Canadian environmental agencies have been aggregated into a single archive for analysis and air pollution modeling work. For 5341 point sources and 1634 aggregated area sources, mercury emissions are apportioned among elemental gaseous [Hg(0)], reactive gaseous[Hg(II)], and particulate [Hg(p)] emissions using speciation factors derived from available monitoring measurements. According to this inventory, 4.82 x 10(5) mol of mercury were emitted in calendar year 1996 in the latitude range 24-51 degrees north, and longitude range 64-91 degrees west, which covers most of North America east of the Mississippi River. Using speciation factors consistent with past emission source studies, we find the relative emission proportions among Hg(0):Hg(II):Hg(p) species are 47:35:18. Maps of the various mercury species' emissions patterns are presented. Gridded emission patterns show local mercury emission extremes associated with individual cement production and municipal incineration facilities, and in contrast to past inventories, population centers do not stand out. Considerable uncertainties are still present in estimating emissions from large point sources, as are methods of apportioning emissions among various mercury species.     

Assessment of hydrochemical trends in the highly anthropised Guadalhorce River basin (southern Spain) in terms of compliance with the European groundwater directive for 2015

One of the key aspects introduced by the European Water Framework Directive 2000/60/EC (WFD) and developed by Groundwater Directive 2006/118/EC was the need to analyse pollution trends in groundwater bodies in order to meet the environmental objectives set in Article 4 WFD. According to this Directive, the main goal of “good status” should be achieved by the year 2015, and having reached this horizon, now is a suitable time to assess the changes that have taken place with the progressive implementation of the WFD. An extensive database is available for the Guadalhorce River basin, and this was used not only to identify in groundwater but also to draw real conclusions with respect to the degree of success in meeting the targets established for this main deadline (2015) The geographic and climate context of the Guadalhorce basin has facilitated the development of a variety of economic activities, but the one affecting the largest surface area is agriculture (which is practised on over 50 % of the river basin). The main environmental impacts identified in the basin aquifers arise from the widespread use of fertilisers and manures, together with the input of sewage from population centres. In consequence, some of the groundwater bodies located in the basin have historically had very high nitrate concentrations, often exceeding 200 mg/L. In addition, return flows, the use of fertilisers and other pressures promote the entry of other pollutants into the groundwater, as well as the salinisation of the main aquifers in the basin. In order to assess the hydrochemical changes that have taken place since the entry into force of the WFD, we performed a detailed trends analysis, based on data from the official sampling networks. In some cases, over 35 years of water quality data are available, but these statistics also present significant limitations, due to some deficiencies in the design or management; thus, data are missing for many years, the results are subject to seasonality effects, there are gaps in the historical records obtained by the monitoring networks and other shortcomings. The results obtained were analysed with the non-parametric Mann-Kendall test and revealed a general upward trend of pollutants in the areas affected by major pressures. In this analysis, we evaluated not only the increase or decrease in pollutants but also the different processes detected and the sources of pollution within the basin area. Our evaluation shows that robust measures should be taken in order to prevent further major degradation of groundwater quality and to enable “good quality” status to be achieved in future extensions of the WFD.     

冶金企业无组织排放颗粒物影响评价

以上海市某冶金企业为例,该厂有正常运行的冶炼炉13座,每年向大气中排放大量颗粒污染物.基于高斯倾斜烟羽模式,整理了2003年上海市全年的气象资料,运用气象概率矩阵法计算了该厂直排点源及无组织面源排放颗粒物的影响,得出了厂区内无组织排放颗粒物落地浓度等值线图.计算结果表明,厂区内颗粒物污染主要来自无组织面源,污染集中在厂区中心的污染源附近;直排点源对环境的影响较小,污染主要集中在下风向.     

Diffuse source apportionment of the Po river eutrophying load to the Adriatic sea: assessment of Lombardy contribution to Po river nutrient load apportionment by means of an integrated modelling approach

The source apportionment of the annual nutrient load carried by the Po river to the Adriatic sea has been studied.

An integrated modelling approach was applied to the Lombardy plain area, which covers about 34% of the Po river watershed area and accounts for about 50% of the point sources’ loads carried by the river. To extract all the information available from direct instream measurements, two different modelling tools were alternatively used. The source apportionment was investigated considering both dry and wet weather scenarios. In order to quantify the apportionment in dry-weather conditions, the Lombardy portion of the Po river basin was modelled by using the US-EPA QUAL2E model. Such a simulation allowed to assess a significant contribution (about 50% of the total dry-weather load) of a not rain-driven diffuse pollution component (i.e. groundwater, springs, lake emissaries). Moreover, to estimate the rain-driven surface runoff contribution to the instream total load, the Lombardy plain area was also modelled by means of the US-DA SWAT model. SWAT results indicate a runoff contribution to the Po river instream total load of about 10 000 t N yr⁻¹ and 1300 t P yr⁻¹ (i.e. approximately the 10–20% of the total annual Lombardy nutrient load). At the event scale (i.e. the single rainstorm event) the runoff contribution may rise up to 30–80% of the total instream load. Finally, the total annual nitrogen load at the Po basin closure was estimated for the period 1985–2001. Out of a total annual load of 140 000 t N yr⁻¹, Lombardy accounts for 43% (point plus diffuse sources). The rain-driven diffuse sources constitute the 20% of the overall total load, the point sources account for 40%, whereas the remaining 40% is mainly constituted by “dry-weather diffuse sources” (i.e. groundwater, springs, lake emissaries).     

Distribution of selected heavy metals and rare earth elements in surficial sediments from the polish sector of the Vistula Lagoon

The concentrations of 22 trace elements plus the rare earth elements (REE) were determined in the <63 μm fraction of surficial sediments from the Polish sector of the Vistula Lagoon by ICP-MS. For the anthropogenically-enriched elements, the mean element enrichment factors (EF's) decrease in the sequence Ag (9.9) > Sb (7.5) >As (5.8) ≥ Cd (5.2) > Pb (3.7), albeit with large variability in concentration in the sediments from one station to another. These observations demonstrate that sediments from the Vistula Lagoon are locally polluted by these anthropogenically-derived elements. Plots of NASC-normalized REE data show that the REE patterns of the sediments have not been significantly modified during transport from their source with only a minor depletion of the heavy rare earth elements (HUE) compare to the light rare earth elements (LREE). The lack of any significant anomalies for Ce and Eu indicates that redox processes have not played a major role in modifying the distribution of the REE. Factor ananalysis of the compositional data shows that sediments from the Polish sector of the Vistula Lagoon can be divided into three main groups depending on the geographical location and the degree of contamination by heavy metals.     

Emission inventory and sources of polycyclic aromatic hydrocarbons in the atmosphere at a suburban area in Taiwan

The application of a chemical mass balance air pollution model to ambient measurements of polycyclic aromatic hydrocarbons (PAHs) is presented. Sixteen air samples were collected at seven sites in a suburban area in Taiwan and analyzed for the concentration of 21 compounds between July 2001 and September 2001. Each ambient sample was evaluated for the PAH contribution from six sources (heavy oil combustion, natural gas combustion, coal combustion, diesel combustion, vehicles and municipal solid waste incinerator). Average predictions agree well with the emission inventory. By this method, the average contributions are 49%, 14%, 22%, 12%, and 2% from vehicles, heavy oil combustion, natural gas combustion, coal combustion and diesel combustion at these seven receptors. By far, vehicles are the major PAH emission sources and municipal solid waste incinerator is a minor contributor. The calculated result of particulate PAHs is compared with that of total (gaseous and particulate) PAHs. The estimate based on total PAHs is better than the estimate based on particulate PAHs only. Contributions of eight low reactive PAHs for the same emission sources and receptors were calculated. Atmospheric reactivity seems not a problem for source apportionment in this study.     

The Use of Artificial Activable Trace Elements to Monitor Pollutant Source Strengths and Dispersal Patterns

A tracer technique using certain of the rare earth elements which are easily activated by neutrons has been developed for the analysis of air pollution problems. Studies employing these tracers were made to determine whether the available meteorological dispersion models can be used effectively to describe pollution emissions from selected industries in the vicinity of Albany, Oregon. The Gaussian plume model was found to be satisfactory for the moderately intense turbulence fields which characterize Stability Types B, C, and D, including cases in which the pollution was trapped by an inversion layer aloft. For sources near ground level, however, it was necessary to make allowance for urban influences on plume dispersion. A box model best described the observed dispersal pattern when the upward penetration of the very intense turbulence of Stability Type A was limited by an inversion layer aloft. These meteorological models were applied using a “blind” experimental procedure to predict the emission rates of the effluent from multiple sources of air pollution in the Albany area. It was found that these techniques can be used to predict the rate of emission within a factor of two for multiple sources consisting of three stacks.     

The Cost of Stack Gas Cleaning in New York State

A cost estimating methodology has been applied to an emission point inventory to estimate the capital and operating costs of stack gas cleaning in the manufacturing sector of New York State. The study represents the first major attempt to estimate control costs on a source by source basis for a large region. The various control cost components are presented for each of the twenty manufacturing industry groups and the usefulness of the estimates for an abatement planning model is outlined.

In recent years a number of heroic efforts have been made to estimate the cost of air pollution abatement on a national or regional basis. Unfortunately, these studies have relied almost entirely upon emission factors, cost engineering functions, pilot plant operations, and average or ideal firms, because of the paucity of primary data.^1-6

In the estimates of capital and operating costs presented below, an attempt has been made to improve on previous research by making extensive use of primary data. The data were taken from an emission inventory of over 20,000 sources of air contamination in New York State. A cost estimating methodology was applied to engineering parameters of existing control operations on a source by source basis. The results have been aggregated to the two-digit SIC level.     

Offsetting Stationary Source Emissions with Transportation Control Measures

Since passage of the 1977 Amendments to the Clean Air Act, comprehensive transportation planning integrating air quality attainment and maintenance with land use controls has been a major objective. Likewise, economic strategies utilizing the market potential of emission control techniques have come to the forefront as preferable control strategies. Some of these techniques include: 1) emission density zoning in which some pollution is allowed in certain areas while others are kept clean; 2) emission fees whereby cost of emission discharge would be calculated and charged to a source according to a structured market cost benefit; and 3) direct and indirect source review whereby emission increments due to additional or more effective control techniques on one source could be sold to other sources. This technique is known as offsetting emissions or as the emission offset policy.     

如皋市工业源COD产排污强度及其产业构成分析

以第一次全国污染源普查数据为依据,分析了如皋市工业源COD产排污强度及其产业构成特征。不同行业群对GDP的贡献和对COD的贡献呈现明显倒挂,COD产排污大户主要集中在该市的一些传统产业,重点污染源企业治理水平明显高于一般污染源企业。在此基础上,就如皋工业源COD产排污水平、产业结构优化在降低COD产排污强度中的意义以及强化传统产业污染治理的主要途径等问题展开了讨论。