采用盐泥对直接染料废水脱色处理的研究

采用氯碱工业的含镁盐泥对直接染料废水进行脱色处理.以直接大红、直接深蓝和直接黑3种直接染料水溶液作为模拟染料废水,考察了盐泥活化温度、盐泥用量等对脱色效果的影响,重点分析了吸附动力学特征,并对盐泥的循环再生利用进行了初步考察.经400℃煅烧活化的盐泥对直接大红、直接深蓝和直接黑3种直接染料均有很高的脱色效果,直接大红、直接深蓝和直接黑3种染料在盐泥吸附剂上的吸附动力学过程符合拟二级动力学方程,20 min左右时,吸附接近平衡.饱和吸附的盐泥经过煅烧后可以循环使用.研究结果为盐泥的综合利用提供了一种新途径.     

Mg/Al水滑石对水中痕量邻苯二甲酸酯的吸附动力学和热力学

研究了Mg／A1水滑石对水中痕量邻苯二甲酸二甲酯（DMP）、邻苯二甲酸二（2一乙基己基）酯（DEHP）和邻苯二甲酸二辛酯（DnOP）的吸附动力学和热力学特性。结果表明，在所研究的浓度范围内，3种邻苯二甲酸酯的吸附动力学曲线均符合准二级速率方程，DMP、DEHP和DnOP分别在600、200和200min基本达到吸附平衡；3种邻苯二甲酸酯的吸附等温线基本符合Langmuir和Freundlich吸附等温方程；在283～308K范围，pH=6．36，3种邻苯二甲酸酯初始浓度均为50μg／L时，吸附过程△H为负值且绝对值为5～12kJ／mol，表明吸附为放热过程，以表面物理吸附为主，邻苯二甲酸酯在Mg／Al水滑石上的吸附是色散力、诱导力、取向力和氢键力等多种作用力协同作用的结果。     

羽毛不可溶角蛋白海绵膜对Cr（Ⅵ）的吸附性能

通过冷冻干燥，将还原法产生的凝胶状不可溶蛋白制备成具有致密孔隙的海绵膜，无需预处理和无交联剂，并研究了其对Cr（Ⅵ）的吸附性能。结果表明，在60℃、固液比12．5g／L、初始浓度100mg／L下最大吸附量为148．8mg／g，吸附过程符合Langmuir型和Freundlich型等温吸附模型，为吸热过程，物理吸附和化学吸附均起到重要作用。     

改性蜂窝煤渣吸附Cr(Ⅵ)的动力学和热力学性能

利用碳酸钡对蜂窝煤渣进行改性，通过粉末X射线衍射光谱（XRD）和扫描电镜（SEM）对改性前后蜂窝煤渣的物质组成和形貌进行表征，研究了改性蜂窝煤渣吸附Cr（Ⅵ）的动力学和热力学性能。实验结果表明，改性蜂窝煤渣对Cr（Ⅵ）具有良好的吸附能力，吸附过程符合准二级吸附动力学模型。分别用Langmuir、Freundlich、D-R和Tempkin等4种吸附等温线模型对实验数据进行拟合，Langmuir方程拟合效果最好，25、35和45℃下的饱和吸附量分别为2.985、2.562和2.630 mg/g。D-R和Tempkin模型研究表明，吸附过程属于物理吸附。热力学研究表明，改性蜂窝煤渣对Cr（Ⅵ）的吸附是一个自发的、放热过程。     

天然和CPB改性沸石对Hg^2＋的吸附特征

通过静态实验研究溴代十六烷基吡啶（CPB）改性沸石和天然沸石对废水中Hg^2＋的吸附特性，探讨了吸附动力学、吸附平衡和吸附热力学机制。研究表明：Langmuir方程能较好地描述2种沸石对Hg^2＋的吸附，CPB改性沸石对Hg^2＋的吸附率得到显著提高。实验条件下，改性沸石对Hg^2＋的吸附率从67．5％提高到98．9％，吸附容量从0．521mg／g提高到3．07mg／g。利用准一级动力学方程、假二级动力学方程、颗粒内扩散模型和Elovich方程分别对动力学过程进行拟合，发现2种沸石对Hg^2＋的吸附均满足假二级动力学方程，且离子的颗粒内扩散对整个吸附过程有影响。动力学拟合、D-R方程拟合和热力学研究综合表明：2种沸石对Hg^2＋的吸附既存在化学吸附又存在物理吸附，吸附吉布斯自由能变（△G^0）、焓变（△H^0）、熵变（△S^0）均小于0，反应为自发的放热反应，低温有利于吸附的进行。     

改性蜂窝煤渣吸附Cr（VI）的动力学和热力学性能

利用碳酸钡对蜂窝煤渣进行改性，通过粉末X射线衍射光谱（XRD）和扫描电镜（SEM）对改性前后蜂窝煤渣的物质组成和形貌进行表征，研究了改性蜂窝煤渣吸附Cr（VI）的动力学和热力学性能。实验结果表明，改性蜂窝煤渣对Cr（VI）具有良好的吸附能力，吸附过程符合准二级吸附动力学模型。分别用Langmuir、Freundlich、D-R和Tempkin等4种吸附等温线模型对实验数据进行拟合，Langmuir方程拟合效果最好，25、35和45℃下的饱和吸附量分别为2．985、2．562和2．630mg／g。D—R和Tempkin模型研究表明，吸附过程属于物理吸附。热力学研究表明，改性蜂窝煤渣对Cr（VI）的吸附是一个自发的、放热过程。     

粉煤灰负载壳聚糖对磷吸附的热力学研究

以粉煤灰负载壳聚糖作为吸附剂,在静态吸附条件下,研究了其对磷的吸附行为,并对吸附过程的热力学进行了分析。结果表明,吸附平衡数据都能够较好地符合Langmuir和Freundlich吸附等温方程,但Langmuir方程能够更好地描述吸附等温线。在20～35℃范围内,磷在粉煤灰负载壳聚糖上的吸附是一个吸热过程,反应的吉布斯自由能变小,同时伴随着熵值的增加,吸附焓变为44.36 kJ/mol。     

氯碱废渣盐泥的干法表面改性与填充性能研究

为了提高盐泥粉体与有机体系的相容性，采用4种偶联剂对盐泥进行干法表面改性,考察了不同改性剂种类、用量及改性时间对改性盐泥在液体石蜡中分散性的影响，并利用傅立叶红外光谱（FTIR）研究了改性机理。结果表明每种改性剂都有一个较佳用量，钛酸酯NDZ-105、 NDZ-311和NDZ-401型的较佳液固比分别为1∶20、1∶10和1∶10，硅烷偶联剂KH-570型的较佳液固比为1∶20；而在这4种偶联剂中，NDZ-105型改性效果最好，在其较佳液固比（1∶20）下，使得改性盐泥在液体石蜡中的浊度达到1 100 NTU以上，其与有机物的亲和性得到很好的改善，其合适改性时间为球磨20 min。通过对改性与未改性盐泥的红外光谱、热重与差示扫描量热分析表明改性剂与盐泥表面发生了化学吸附。通过工业填充，得到了改性盐泥填充的聚氨酯产品，其性能达到填充CaCO₃粉体的聚氨酯性能。     

合成碳羟基磷灰石对水中双酚A的吸附性能研究

利用废弃蛋壳为原料、尿素为添加剂，合成纳米碳羟基磷灰石(CHAP)用于吸附水中双酚A（BPA）。利用红外光谱、扫描电镜和X射线能谱测试技术对CHAP样品表面化学进行了表征，同时考察了环境因子pH值、吸附时间和BPA初始浓度对吸附的影响。实验结果表明，CHAP对BPA去除率在酸性（pH=3～6）溶液中较好，而在中性和碱性环境中减弱。通过静态吸附实验数据计算分析得知，CHAP对BPA吸附符合Langmuir和Freundlich等温式，准二级动力学模型比准一级动力学模型能更好地描述CHAP对BPA吸附动力学行为。     

葛根去除水溶液中亚甲基蓝的生物吸附机理和特性

对农副产品葛根吸附水溶液中亚甲基蓝的特性和机理进行了一系列的研究。考察了不同条件对吸附效果的影响;采用2种等温线模型和3种动力学模型对吸附机理和动力学特性进行了模拟分析,并计算了相关的热力学函数。结果发现,溶液pH值等实验条件对吸附效果有较大的影响;Langmuir方程能很好地描述其吸附等温线,吸附是一个符合二级动力学过程的物理吸附;热力学函数计算结果显示,此吸附是一个自发的放热过程。在3种不同温度下,由Langmuir方程计算的最大吸附量为98.23、91.04和87.28 mg/g,表明葛根是一种良好的,具有一定发展潜力的染料吸附剂。     

改性松针对水体中铅(II)的吸附

探讨了改性松针(GXLsp)作为吸附剂对水体中铅离子的吸附性能,考察了吸附时间、溶液pH值、吸附剂用量、盐离子浓度、Pb(II)初始浓度及温度对改性松针吸附Pb(II)的影响。利用Langmuir和Freundlich等温线模型对实验数据进行非线性拟合分析,结果表明,Freundlich等温线模型能很好地描述松针对Pb(II)的吸附过程。热力学参数表明吸附是一个自发的吸热过程。改性松针对铅的吸附行为符合拟二级动力学方程,表明吸附过程是以化学吸附为主。在293K时松针对Pb(II)的饱和吸附量为318.3 mg/g,因此,GXLsp可作为一种高效低值生物质吸附剂以去除水体中重金属Pb(II)的污染。     

腐熟污泥对废水中Cd(Ⅱ)与Zn(Ⅱ)的吸附性能研究

利用腐熟污泥作为一种重金属吸附剂,考察其对水中重金属锌和镉的吸附过程.实验数据的拟合采用了Pseudo-first Order-和Pseudo-second Order 2种动力学模型以及Langmuir和Freundlich 2种吸附等温线模型;拟合结果表明,腐熟污泥对锌与镉的吸附过程符合Pseudo-second ...     

Kinetic, equilibrium isotherm and thermodynamic studies of Cr(VI) adsorption onto low-cost adsorbent developed from peanut shell activated with phosphoric acid

A particular agricultural waste, peanut shell, has been used as precursor for activated carbon production by chemical activation with H₃PO₄. Unoxidized activated carbon was prepared in nitrogen atmosphere which was then heated in air at a desired temperature to get oxidized activated carbon. The prepared carbons were characterized for surface area, surface morphology, and pore volume and utilized for the removal of Cr(VI) from aqueous solution. Batch mode experiments were conducted to study the effects of pH, contact time, particle size, adsorbent dose, initial concentration of adsorbate, and temperature on the adsorption of Cr(VI). Cr(VI) adsorption was significantly dependent on solution pH, and the optimum adsorption was observed at pH 2. Pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were used to analyze the kinetic data obtained at different initial Cr(VI) concentrations. The adsorption kinetic data were described very well by the pseudo-second-order model. Equilibrium isotherm data were analyzed by the Langmuir, Freundlich, and Temkin models. The results showed that the Langmuir adsorption isotherm model fitted the data better in the temperature range studied. The adsorption capacity which was found to increase with temperature showed the endothermic nature of Cr(VI) adsorption. The thermodynamic parameters, such as Gibb’s Free energy change (ΔG°), standard enthalpy change (ΔH°), and standard entropy change (ΔS°) were evaluated.     

The removal of uranium (VI) from aqueous solutions onto activated carbon developed from grinded used tire

In this study, activated carbon was prepared from waste tire by KOH chemical activation. The pore properties including the BET surface area, pore volume, pore size distribution, and average pore diameter were characterized. BET surface area of the activated carbon was determined as 558 m²/g. The adsorption of uranium ions from the aqueous solution using this activated carbon has been investigated. Various physico-chemical parameters such as pH, initial metal ion concentration, and adsorbent dosage level and equilibrium contact time were studied by a batch method. The optimum pH for adsorption was found to be 3. The removal efficiency has also been determined for the adsorption system as a function of initial concentration. The experimental results were fitted to Langmuir, Freundlich, and Dubinin–Radushkevich (D-R) isotherm models. A comparison of best-fitting was performed using the coefficient of correlation and the Langmuir isotherm was found to well represent the measured sorption data. According to the evaluation using the Langmuir equation, the saturated monolayer sorption capacity of uranium ions onto waste tire activated carbon was 158.73 mg/g. The thermodynamic equilibrium constant and the Gibbs free energy were determined and results indicated the spontaneous nature of the adsorption process. Kinetics data were best described by pseudo-second-order model.     

Application of zeolite-activated carbon macrocomposite for the adsorption of Acid Orange 7: isotherm, kinetic and thermodynamic studies

In this study, the adsorption behavior of azo dye Acid Orange 7 (AO7) from aqueous solution onto macrocomposite (MC) was investigated under various experimental conditions. The adsorbent, MC, which consists of a mixture of zeolite and activated carbon, was found to be effective in removing AO7. The MC were characterized by scanning electron microscopy (SEM), energy dispersive X-ray, point of zero charge, and Brunauer–Emmett–Teller surface area analysis. A series of experiments were performed via batch adsorption technique to examine the effect of the process variables, namely, contact time, initial dye concentration, and solution pH. The dye equilibrium adsorption was investigated, and the equilibrium data were fitted to Langmuir, Freundlich, and Tempkin isotherm models. The Langmuir isotherm model fits the equilibrium data better than the Freundlich isotherm model. For the kinetic study, pseudo-first-order, pseudo-second-order, and intraparticle diffusion model were used to fit the experimental data. The adsorption kinetic was found to be well described by the pseudo-second-order model. Thermodynamic analysis indicated that the adsorption process is a spontaneous and endothermic process. The SEM, Fourier transform infrared spectroscopy, ultraviolet–visible spectral and high performance liquid chromatography analysis were carried out before and after the adsorption process. For the phytotoxicity test, treated AO7 was found to be less toxic. Thus, the study indicated that MC has good potential use as an adsorbent for the removal of azo dye from aqueous solution.     

Adsorption of phosphate from aqueous solution onto alunite

The phosphate removal potential of alunite, a low cost and abundantly available material, has been investigated. The effects of calcination temperature and time of alunite, adsorbent particle size, pH and initial phosphate concentration on the phosphate adsorption by the calcined alunite have been studied. Phosphate removal was seen to increase with increasing calcination temperature, decreasing adsorbent particle size and pH. Adsorption of phosphate followed first-order rate kinetics. Langmuir and Freundlich adsorption isotherm constants and correlation coefficients were calculated and compared. It was concluded that the adsorption data of phosphate onto calcined alunite fitted to the Langmuir model more than Freundlich model. Specific surface areas of the calcined alunite were calculated at different calcination temperatures and particle sizes.     

3种污泥对活性黑KN-B的生物吸附及降解研究

对比研究了好氧污泥、厌氧污泥和厌氧颗粒污泥对染料活性黑KN-B的吸附和降解。结果表明,这3种污泥对活性黑的吸附均符合Freundlich模型(R~2为0.9665～0.9859)和Langmuir模型(R~2为0.9460～0.9906),但3种污泥对活性黑这种染料的吸附量较小;并且厌氧污泥对活性黑的吸附能力优于好氧污泥和厌氧颗粒污泥。实验还发现,3种污泥对活性黑的脱色主要是生物降解作用,而不是吸附作用。     

好氧污泥对活性艳兰KN-G的吸附特性研究

实验研究了活性艳兰KN-G在好氧污泥上的吸附等温线和吸附动力学,考察了pH对好氧污泥吸附活性艳兰KN-G的影响。结果表明,好氧污泥对活性艳兰KN-G的吸附Freund lich和Langmu ir方程准确性较高,但是从模型的准确性和稳定性两方面考虑,Freund lich方程更适合描述好氧污泥吸附活性艳兰KN-G。应用伪一级、伪二级反应动力学和颗粒内扩散方程模型对实验数据进行验证,表明好氧污泥吸附活性艳兰KN-G更符合伪二级反应动力学模型。pH值对活性艳兰KN-G的吸附影响很大,pH值与吸附量呈负相关。     

Preparation and characterization of surfactant-modified hydroxyapatite/zeolite composite and its adsorption behavior toward humic acid and copper(II)

A novel composite material, i.e., surfactant-modified hydroxyapatite/zeolite composite, was used as an adsorbent to remove humic acid (HA) and copper(II) from aqueous solution. Hydroxyapatite/zeolite composite (HZC) and surfactant-modified HZC (SMHZC) were prepared and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and field emission scanning electron microscope. The adsorption of HA and copper(II) on SMHZC was investigated. For comparison purposes, HA adsorption onto HZC was also investigated. SMHZC exhibited much higher HA adsorption capacity than HZC. The HA adsorption capacity for SMHZC decreased slightly with increasing pH from 3 to 8 but decreased significantly with increasing pH from 8 to 12. The copper(II) adsorption capacity for SMHZC increased with increasing pH from 3 to 6.5. The adsorption kinetic data of HA and copper(II) on SMHZC obeyed a pseudo-second-order kinetic model. The adsorption of HA and copper(II) on SMHZC took place in three different stages: fast external surface adsorption, gradual adsorption controlled by both film and intra-particle diffusions, and final equilibrium stage. The equilibrium adsorption data of HA on SMHZC better fitted to the Langmuir isotherm model than the Freundlich isotherm model. The equilibrium adsorption data of copper(II) on SMHZC could be described by the Langmuir, Freundlich, and Dubinin–Radushkevich isotherm models. The presence of copper(II) in solution enhanced HA adsorption onto SMHZC. The presence of HA in solution enhanced copper(II) adsorption onto SMHZC. The mechanisms for the adsorption of HA on SMHZC at pH 7 may include electrostatic attraction, organic partitioning, hydrogen bonding, and Lewis acid–base interaction. The mechanisms for the adsorption of copper(II) on SMHZC at pH 6 may include surface complexation, ion exchange, and dissolution–precipitation. The obtained results indicate that SMHZC can be used as an effective adsorbent to simultaneously remove HA and copper(II) from water.     

Adsorption of acid dye onto activated carbons prepared from agricultural waste bagasse by ZnCl2 activation

A series of activated carbons were prepared from agricultural waste sugarcane bagasse by chemical activation with zinc chloride (ZnCl2) as an activating agent at 500 degrees C and 0.5 h soaking time. The Langmuir surface area and total pore volume were used to estimate the average pore diameter of the carbon products. The values of the surface area and pore volume increased linearly with increase in the impregnation ratio (IR) up to 100 wt%. The adsorption capacities of the derived adsorbents for Acid Orange 10 were measured at 20 degrees C and 40 degrees C to gain further insights into the acidic surface oxides of the adsorbent from the results of Fourier transform infrared (FTIR) spectroscopy analysis and pH measurement. Adsorption isotherms of the acid dye on adsorbents prepared were determined and correlated with common isotherm equations. It was found that the Langmuir model appears to fit the isotherm data better than the Freundlich model. The physical properties of these adsorbents were consistent with the parameters obtained from the isotherm equations.