Isolation and identification of new vasodilative substances in diesel exhaust particles

Background, aim, and scope  

We recently developed a new isolation method for diesel exhaust particles (DEP), involving successive extraction with H₂O, sodium bicarbonate, and sodium hydroxide, in which the sodium hydroxide extract was found to consist of phenolic components. Analysis of the extract revealed that vasodilative-active nitrophenols are in DEP in significantly higher concentrations than those estimated by an earlier method involving a combination of solvent extraction and repeated chromatography. These findings indicated that our new procedure offers a simple, efficient, and reliable method for the isolation and identification of bioactive substances in DEP. This encouraged us to extend our work toward investigating new vasodilatory substances in the sodium bicarbonate extract.     

Hydrogen peroxide photolysis, fenton reagent and photo-fenton for the degradation of nitrophenols: a comparative study

The kinetics of the degradation of seven nitrophenols (2-nitrophenol, 4-nitrophenol, 2,5-dinitrophenol, 2,6-dinitrophenol, 2,4-dinitrophenol, 2-methyl-4,6-dinitrophenol, 4-methyl-2,6-dinitrophenol) with the Fenton reagent, photo-Fenton, and hydrogen peroxide photolysis was investigated. The efficiency and operating costs for the studied treatments were evaluated and compared. The Fenton reagent was found to be the most efficient and the cheapest way for the nitrophenols (NPs) degradation. The formation of nitrate as a result of mineralisation of organically bounded nitrogen was observed during the treatment of NPs with studied treatment processes. The degrees of organically bounded nitrogen conversion to nitrate after 90% degradation of NPs with the Fenton, photo-Fenton and hydrogen peroxide photolysis were 51-67%, 85-90%, and 50-60%, respectively. According to Daphnia magna acute toxicity test, the Fenton treatment led to complete detoxification of NPs.     

Spatial and Geographical Variations of Urban, Suburban and Rural Atmospheric Concentrations of Phenols and Nitrophenols (7 pp)

Goal, Scope and Background Atmospheric sampling (gas and particles) of 5 phenols (phenol, m-cresol, p-cresol, o-cresol, pentachlorophenol) and 15 nitrophenols (3-methyl-2-nitrophenol, 3-nitrophenol, 4-methyl-2-nitrophenol, 5-methyl-2-nitrophenol, 2-methyl-3nitrophenol, 3-methyl-4-nitrophenol, 2,6-dinitrophenol, bromoxynil, 2,5-dinitrophenol, 2,6-dinitro-p-cresol, 2,4-dinitrophenol, ioxynil, DNOC, 3,4-dinitrophenol, dinoseb) on XAD-2 resin (20 gr) and glass fibre filters, respectively, were performed in 2002 by using 'Digitel DA80' high volume samplers. These measurements were undertaken in order to show spatial and geographical variations of concentrations and the role of traffic in the emissions of these compounds to the atmosphere. Methods Sampling were performed in Strasbourg (eastern France), in its vicinity (Schiltigheim) and in Erstein. Sites were chosen to be representative of urban (Strasbourg), suburban (Schiltigheim) and rural (Erstein) conditions. Field campaigns were undertaken simultaneously in urban and suburban sites during all the seasons during 4 hours at a flow rate of 60 m3.h-1, which gives a total of 240 m3 of air per sample. Period of sampling varied between 06h00 to 10h00, 11h00 to 15h00 and 18h00 to 22h00 in order to evaluate a variation of concentration during automobile traffic between urban, suburban and rural areas. Gas and particle samples were separately Soxhlet extracted for 12 h with a mixture of CH2Cl2 / n-hexane (50:50 v/v), concentrated to about 1 mL with a rotary evaporated and finally dried under nitrogen. Dry extracts were dissolved in 1 mL of CH3CN. Before analysis, extracts were sylilated by using MTBSTFA. Analysis was performed by GC/MSD in the SIM mode. Results and Discussion Partitioning of phenolic compounds between gas and particle phases seems to be mainly correlated with vapour pressure. Among phenolic compounds analysed, phenol, p-cresol, pentachlorophenol and 2.4-dinitrophenol were detected in all samples and emissions from traffic seems to be the major source for the presence of these compounds to the atmosphere. No increase of concentrations in autumn tend to confirm this hypothesis since, with the use of domestic heating in colder months, increases of PAHs concentrations were observed and these compounds are known to be emitted by all combustion processes. Pentachlorophenol is a special case since this molecule is only used as wood preservative. Its presence in all atmospheric samples, whatever the locations and the period of time is the consequence of its persistence. Conclusions and Perspectives These measurements demonstrate that phenols and nitrophenols are emitted to the atmosphere and further measurements, in order to confirm their sources, their behaviour and their potential impact to the air quality and to human health should be undertaken especially since the literature collected is relatively old. Concentrations of pentachlorophenol measured are very low and, due to its toxicity, further investigations should be undertaken. - * The basis of this peer-reviewed paper is a presentation at the 9th FECS Conference on 'Chemistry and Environment', 29 August to 1 September 2004, Bordeaux, France.     

Measurement of phase-distributed nitrophenols in Rome ambient air

Atmospheric nitrophenols (NPs) were determined both in the gas and particle phases by combining the annular denuder sampling technique with GC-MS analysis. The phase distribution of six mono-NPs identified in air sampled in downtown Rome was assessed. 4-NP, 3-methyl-4-NP and 2,6-dimethyl-4-NP were found for more than 75% in the particle phase, whilst 2-NP, 4-methyl-2-NP and 5-methyl-2-NP predominated in the gas phase. Concentration levels lower than 20 ng m-3 were observed for all NPs, among which 4-NP (17.8+/-5.6 ng m-3) and 2-NP (10.4+/-4.2 ng m-3) were the most abundant congeners in the two phases, respectively.     

Particulate matter in new technology diesel exhaust (NTDE) is quantitatively and qualitatively very different from that found in traditional diesel exhaust (TDE)

Diesel exhaust (DE) characteristic of pre-1988 engines is classified as a "probable" human carcinogen (Group 2A) by the International Agency for Research on Cancer (IARC), and the U.S. Environmental Protection Agency has classified DE as "likely to be carcinogenic to humans." These classifications were based on the large body of health effect studies conducted on DE over the past 30 or so years. However, increasingly stringent U.S. emissions standards (1988-2010) for particulate matter (PM) and nitrogen oxides (NOx) in diesel exhaust have helped stimulate major technological advances in diesel engine technology and diesel fuel/lubricant composition, resulting in the emergence of what has been termed New Technology Diesel Exhaust, or NTDE. NTDE is defined as DE from post-2006 and older retrofit diesel engines that incorporate a variety of technological advancements, including electronic controls, ultra-low-sulfur diesel fuel, oxidation catalysts, and wall-flow diesel particulate filters (DPFs). As discussed in a prior review (T. W. Hesterberg et al.; Environ. Sci. Technol. 2008, 42, 6437-6445), numerous emissions characterization studies have demonstrated marked differences in regulated and unregulated emissions between NTDE and "traditional diesel exhaust" (TDE) from pre-1988 diesel engines. Now there exist even more data demonstrating significant chemical and physical distinctions between the diesel exhaust particulate (DEP) in NTDE versus DEP from pre-2007 diesel technology, and its greater resemblance to particulate emissions from compressed natural gas (CNG) or gasoline engines. Furthermore, preliminary toxicological data suggest that the changes to the physical and chemical composition of NTDE lead to differences in biological responses between NTDE versus TDE exposure. Ongoing studies are expected to address some of the remaining data gaps in the understanding of possible NTDE health effects, but there is now sufficient evidence to conclude that health effects studies of pre-2007 DE likely have little relevance in assessing the potential health risks of NTDE exposures.     

Wet deposition of pesticides and nitrophenols at two sites in Denmark: measurements and contributions from regional sources

The concentrations of selected pesticides, of some of their degradation products and nitrophenols in rain were measured at two stations in Denmark in the period January 2000-July 2001. Forty compounds were quantified at least at one station during at least one sampling period. Additionally 17 compounds could be detected but not quantified, and 22 compounds could not be detected at all. The highest depositions of pesticides were observed for pendimethalin and desethylterbuthylazine, which is a degradation product of terbuthylazine. The deposition of the nitrophenols 2,4-dinitrophenol, DNOC, 3-methyl-4-nitrophenol was much higher than that of pesticides. The deposition of 2,4-dinitrophenol was e.g. up to a factor of 40 higher than that of pendimethalin. Atrazine, chloridazon, 2,4-D, dieldrin, disulfoton, fenitrothion, isoproturon, lenacil, metazachlor and propachlor were found in precipitation, although these pesticides are not allowed in Denmark. It can therefore be concluded that they came from abroad and have been transported over at least 60-80 km. For some of these compounds the transport distance is much longer.     

Optimization of an effective extraction procedure for the analysis of microcystins in soils and lake sediments

Microcystin analysis in sediments and soils is considered very difficult due to low recovery for extraction. This is the primary limiting factor for understanding the fate of toxins in the interface between water and sediment in both the aquatic ecosystem as well as in soils. In the present study, a wide range of extraction solvents were evaluated over a wide range of pH, extraction approaches and equilibration time to optimize an effective extraction procedure for the analysis of microcystins in soils and lake sediments. The number of extractions required and acids in extraction solutions were also studied. In this procedure, EDTA-sodium pyrophosphate solution was selected as an extraction solvent based on the adsorption mechanism study. The optimized procedure proved to be highly efficient and achieved over 90% recovery. Finally, the developed procedure was applied to field soil and sediment sample collected from Chinese lakes during bloom seasons and microcystins were determined in six of ten samples.     

Assessing the transformation kinetics of 2- and 4-nitrophenol in the atmospheric aqueous phase. Implications for the distribution of both nitroisomers in the atmosphere

Different transformation processes for nitrophenols in the atmospheric aqueous phase were considered to assess their relative importance, and their ability to account for the higher occurrence of 4-nitrophenol (4NP) compared to 2-nitrophenol (2NP) in the atmosphere. The importance of the different processes was in the order ^?OH > ^?NO₃ > direct photolysis > nitration to 2,4-dinitrophenol. 2NP is more reactive than 4NP with the hydroxyl radical, but the difference is low. Accordingly, such a process could account for the higher atmospheric occurrence of 4NP only if the observed atmospheric nitrophenols were what was left of an almost complete degradation by ^?OH. This would imply the unlikely scenario that the known nitrophenol sources to the atmosphere were only a limited fraction of the actual ones. A more likely, tentative possibility would be connected with the higher occurrence of 4NP on particles. If the reactivity order of nitrophenols in the atmospheric compartments was water droplets > gas phase > particles, particulate matter could act as a reservoir of 4NP. 2NP would undergo degradation in gas phase or solution at a higher rate than 4NP on particles, which could decrease the atmospheric levels of 2NP below those of 4NP.     

Particulate Matter in New Technology Diesel Exhaust (NTDE) is Quantitatively and Qualitatively Very Different from that Found in Traditional Diesel Exhaust (TDE)

ABSTRACT

Diesel exhaust (DE) characteristic of pre-1988 engines is classified as a “probable” human carcinogen (Group 2A) by the International Agency for Research on Cancer (IARC), and the U.S. Environmental Protection Agency has classified DE as “likely to be carcinogenic to humans.” These classifications were based on the large body of health effect studies conducted on DE over the past 30 or so years. However, increasingly stringent U.S. emissions standards (1988–2010) for particulate matter (PM) and nitrogen oxides (NO_x) in diesel exhaust have helped stimulate major technological advances in diesel engine technology and diesel fuel/lubricant composition, resulting in the emergence of what has been termed New Technology Diesel Exhaust, or NTDE. NTDE is defined as DE from post-2006 and older retrofit diesel engines that incorporate a variety of technological advancements, including electronic controls, ultra-low-sulfur diesel fuel, oxidation catalysts, and wall-flow diesel particulate filters (DPFs). As discussed in a prior review (T. W. Hesterberg et al.; Environ. Sci. Technol. 2008, 42, 6437-6445), numerous emissions characterization studies have demonstrated marked differences in regulated and unregulated emissions between NTDE and “traditional diesel exhaust” (TDE) from pre-1988 diesel engines. Now there exist even more data demonstrating significant chemical and physical distinctions between the diesel exhaust particulate (DEP) in NTDE versus DEP from pre-2007 diesel technology, and its greater resemblance to particulate emissions from compressed natural gas (CNG) or gasoline engines. Furthermore, preliminary toxicological data suggest that the changes to the physical and chemical composition of NTDE lead to differences in biological responses between NTDE versus TDE exposure. Ongoing studies are expected to address some of the remaining data gaps in the understanding of possible NTDE health effects, but there is now sufficient evidence to conclude that health effects studies of pre-2007 DE likely have little relevance in assessing the potential health risks of NTDE exposures.

IMPLICATIONS Based on the distinct physical and chemical properties of New Technology Diesel Exhaust (NTDE), it has become clear that findings from the health effects studies conducted on traditional DE (TDE) over the last 30 years have little relevance to NTDE, which is more similar to the exhaust from compressed natural gas (CNG) or gasoline engine emissions than to traditional TDE. Once sufficient health effects data are available for NTDE, it will thus be necessary to conduct new hazard and risk assessments for NTDE that are independent of the DE toxicological database acquired on emissions from pre–2007 diesel technology.     

Phenol photonitration upon UV irradiation of nitrite in aqueous solution I: effects of oxygen and 2-propanol.

Nitrophenols are formed in aqueous solution upon UV irradiation of phenol and nitrite. The formation of nitrophenols is enhanced by dissolved oxygen and inhibited by the addition of 2-propanol. The mechanism of phenol photonitration involves both .NO2 (or N2O4, reacting with phenol, and 4-nitrosophenol, which is oxidised to 4-nitrophenol. A reaction scheme is proposed based on experimental results.     

A rapid and efficient determination of natural estrogens in soils by pressurised liquid extraction and gas chromatography-mass spectrometry

We present a new analytical procedure for the extraction and determination of natural estrogens in soils based on pressurised liquid extraction and GC-MS determination. After testing twelve solvents, acetone proved to be the most efficient extractant. The optimum extraction temperature is 60 degrees C. Soil extracts have to be purified and concentrated by C-18 solid phase extraction. The dried extracts are derivatised by N-methyl-N-(trimethylsilyl)trifluoro-acetamide before measurement by GC-MS. Recoveries of 79-103% with relative standard deviations 相似文献   

Phenol and nitrophenols in the air and dew waters of Santiago de Chile

Phenol, nitrophenols and dinitrophenols were measured in air and dews in downtown Santiago de Chile. In both systems, phenol, 2-nitrophenol (2-NP), and 4-nitrophenol (4-NP) were the compounds found in higher concentrations and with major frequency. Temporal profiles in air were compatible with a significant direct incorporation from mobile sources. The data can be explained in terms of a faster removal of 2-NP than 4-NP, with the former predominating in fresh air masses and 4-NP in more aged samples. All these compounds, as well as dinitrophenols, were found in dew waters. Simultaneous measurements in air and dew indicate that phenol present in dew exceeds that expected in equilibrated samples, while the opposite occurs with 4-NP. This last result is associated to mass transfer limitations for the highly water soluble nitroderivative.     

Abatement and degradation pathways of toluene in indoor air by positive corona discharge

Indoor air concentrations of volatile organic compounds often exceed outdoor levels by a factor of 5. There is much interest in developing new technologies in order to improve indoor air quality. In this work non-thermal plasma (DC positive corona discharge) is explored as an innovative technology for indoor air purification. An inlet gas stream of 10 l min(-1) containing 0.50+/-0.02 ppm toluene was treated by the plasma reactor in atmospheric conditions. Toluene removal proved to be achievable with a characteristic energy density epsilon(0) of 50 J l(-1). Removal efficiencies were higher for 26% relative humidity (epsilon(0)=35 J l(-1)), compared with those at increased humidities (50% relative humidity, epsilon(0)=49 J l(-1)). Reaction products such as formic acid, benzaldehyde, benzyl alcohol, 3-methyl-4-nitrophenol, 4-methyl-2-nitrophenol, 4-methyl-2-propyl furan, 5-methyl-2-nitrophenol, 4-nitrophenol, 2-methyl-4,6-dinitrophenol are identified by means of mass spectrometry. Based on these by-products a toluene degradation mechanism is proposed.     

Intermediate distributions and primary yields of phenolic products in nitrobenzene degradation by Fenton's reagent

Nitrobenzene thermal degradation was investigated using the Fenton reagent in different experimental conditions. Reaction products were analyzed by HPLC, GC-MS, LC-MS and IC. The products obtained at different nitrobenzene conversion degrees show that degradation mainly involves successive hydroxylation steps of the aromatic ring and its subsequent opening followed by oxidation of corresponding aliphatic compounds. Our results show as primary reaction products: 4-nitrophenol, 3-nitrophenol, 2-nitrophenol, phenol and 1,3-dinitrobenzene, indicating that both hydroxylation and nitration reactions are involved. The formation of phenolic products can be explained by postulating an initial step of HO() addition to nitrobenzene ring. The mechanisms of primary reaction pathways are discussed and a detailed kinetic analysis to obtain the true primary yields of phenolic products is proposed. The relative yields observed for nitrophenol isomers do not follow the expected orientation according to deactivating characteristics of the nitro group but significantly depend on Fe(+2), Fe(+3), H(2)O(2) and O(2) concentrations. The understanding of the effect of reaction conditions on the relative product distribution benefits the application of Fenton and Fenton-like systems to waste water treatment.     

Multicriteria optimisation of a simultaneous supercritical fluid extraction and clean-up procedure for the determination of persistent organohalogenated pollutants in aquaculture samples

A useful tool based on a single-step extraction and clean-up procedure for the determination of 15 organohalogenated pollutants (including brominated flame retardants) in aquaculture samples, using aluminium oxide basic and acidic silica gel in the supercritical extraction cell followed by gas chromatography with electron capture detection or mass spectrometry has been developed. This effective clean-up step ensures a minimum of chromatographic difficulties related to complex matrix components such as aquaculture feed. The extraction procedure has been screened by a fractional factorial design for the preliminary statistically significant parameters. The factors selected were extraction temperature, pressure, static extraction time, dynamic extraction time and carbon dioxide flow rate. The Doehlert design, followed by a multicriteria decision-making strategy, was then performed in order to determine the optimum conditions for the two most significant factors: pressure (165 bar) and dynamic extraction time (27 min). Under optimal conditions, the procedure developed with GC-MS/MS provides an excellent linearity, detection (0.01-0.2 ng g(-1)) and quantification limits (0.05-0.8 ng g(-1)) for most of the analytes investigated. The feasibility of the proposed supercritical fluid extraction method was validated by analysing two reference materials and fish feed and shellfish samples with satisfactory results.     

A simplified method for sampling and analysis of high volume surface water for organic contaminants using XAD-2

A simple compressed-gas driven system for field processing and extracting water for subsequent analyses of hydrophobic organic compounds is presented. The pumping device is a pneumatically driven pump and filtration system that can easily clarify at 4 L/min. The extraction device uses compressed gas to drive filtered water through two parallel XAD-2 resin columns, at about 200 mL/min. No batteries or inverters are required for water collection or processing. Solvent extractions were performed directly in the XAD-2 glass columns. Final extracts are cleaned-up on Florisil cartridges without fractionation and contaminants analyzed by GC-MS. Method detection limits (MDLs) and recoveries for dissolved organic contaminants, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and pesticides are reported along with results of surface water analysis for the San Francisco Bay, CA.     

Development of an efficient extraction method for oxytetracycline in animal manure for high performance liquid chromatography analysis

Oxytetracycline (2-(amino-hydroxy-methylidene)-4-dimethylamino-5,6,10,11,12a-pentahydroxy-6-methyl-4,4a,5,5a-tetrahydrotetracene-1,3,12-trione) is a major member of the tetracycline antibiotics family of which are widely administered to animals in concentrated animal feeding operations for purposes of therapeutical treatment and health protection. With the disposal of animal manure as fertilizer into agricultural land, tetracyclines enter the environment. However, tetracyclines chelate with multivalent cations and proteins, resulting in low extraction efficiencies from animal manure for tetracycline residue analysis. In this study an efficient extraction method for oxytetracycline from steer manure using methanol/water solution amended with chelating organic acid was developed for the analysis of high performance liquid chromatography. The effect of species and amount of amendment acids, shaking time, methanol/water ratio, manure weight, and repeated times of extraction was investigated. It was optimized to amend 2.5 g citric acid and 1.1 g oxalic acid with 10.0 g manure sample in a 50-ml centrifuge tube and extract with 15 ml methanol/water (9:1 in volume) by vigorously shaking for 30 min in a reciprocating shaker. After centrifugation at 11,000 rpm, supernatant is collected. Sample was extracted for a total of 3 times. The developed extraction method was further applied to extract oxytetracycline from fresh and aged cow manure, swine and poultry manure, and soil. Satisfactory recoveries ranging from (84.1 ± 2.4) % to (102.0 ± 3.1) % were obtained, demonstrating that the optimized extraction method is robust for oxytetracycline from different manure sample matrixes.     

Monitoring laboratory-scale bioventing using synchronous scan fluorescence spectroscopy: analysis of the vapor phase

Bioventing is an improved method of soil remediation that is being used with increasing frequency. In this paper, we refine techniques to measure the progress of petroleum hydrocarbon decomposition by monitoring vapor phase composition with synchronous scan fluorescence spectroscopy (SSFS). Analysis of the vapor phase has advantages compared to standard extraction techniques that require extensive sample handling and clean up. For comparison, hydrocarbon contamination in the soil was measured by analysis of Soxhlet extractions with gas chromatography-mass spectrometry (GC-MS). Comparison of the GC-MS and SSFS data showed that changes in hydrocarbon composition measured in the vapor phase provide an accurate measure of decomposition reactions taking place in the soil.     

Nitrophenols in precipitation

From 1995 to 1998 the concentrations of 4-nitrophenol, 2-methyl-4-nitrophenol, 3-methyl-4-nitrophenol, dinitro-ortho-cresol (DNOC) and 2,4-di-nitrophenol were measured monthly by HPLC in precipitation at eight different locations in Bavaria (Germany). Samples were collected by purpose-constructed computerised rainwater samplers which record electronically various sensor data each hour and adjust the sample temperature to 4 degrees C. The highest nitrophenol (NP) concentrations were measured for 4-NP. The median at all locations is higher than 1 microg/l. The median of the other NPs ranges between 0.2 and 0.8 microg/l. Considering the rain amounts the highest depositions were calculated for the regions Spessart, Bayerischer Wald and Chiemgauer Alpen. The median of 4-NP depositions extents to 200 microg/(month m2). The highest medians of the other NP depositions reach approximately 50 microg/(month m2).     

Bioassay-directed chemical analysis of River Elbe surface water including large volume extractions and high performance fractionation

A bioassay-directed fractionation and identification (toxicity identification evaluation procedure) was performed on extracts of 10 1 River Elbe water samples. The experimental method included a SDB-1 solid phase extraction followed by RP-HPLC fractionation and subfractionation. Chemical analysis by GC-MS as well as acute toxicity testing using a luminescent bacteria assay were conducted in the respective fractions. Many substances were identified, among which were pesticides and pharmaceuticals, but many compounds remained unknown.