2种浸出方法对水泥熟料的适用性比较

采用2种不同类型的代表性浸出方法:TCLP和NEN7371对不同重金属含量及不同烧制条件下所得水泥熟料进行浸出实验.结果表明,NEN7371方法下各样品中所有受试重金属几乎均有检出,大部分重金属的浸出率均高于10%;重金属的浸出浓度与其在熟料样品中含量的趋势对应性较好;TCLP方法下各样品中的受试重金属均只有部分检出,且浸出率一般在0.5%左右,浸出浓度很低,仪器检测误差较大.说明在考察水泥熟料中重金属的浸出特性时,NEN7371方法的适用性相对更好.     

Cytotoxicity of municipal solid waste incinerator ash wastes toward mammalian kidney cell lines

In this study, three municipal solid waste incinerator (MSWI) ash wastes-bottom ash, scrubber residue, and baghouse ash-were extracted using a toxicity characteristic leaching procedure (TCLP) extractant. These so-called final TCLP extracts were applied to African green monkey kidney cells (Vero), baby hamster kidney cells (BHK-21), and pig kidney cells (PK-15), multi-well absorption reader analysis was performed to test how the cytotoxicity of the incineration ashes would affect the digestive systems of animals. Ion-coupled plasma analyses indicated that the baghouse ash extract possessed the highest pH and heavy metal concentration, its cytotoxicity was also the highest. In contrast, the bottom ash and the scrubber residue exhibited very low cytotoxicities. The cytotoxicities of mixtures of baghouse ash and scrubber residue toward the three tested cell lines increased as the relative ratio of the baghouse ash increased, especially for the Vero cells. The slight cytotoxicity of the scrubber residue arose mainly from the presence of Cr species, whereas the high cytotoxicity of the baghouse ash resulted from its high content of heavy metals and alkali ions. In addition, it appears that the dissolved total organic carbon content of these ash wastes can reduce the cytotoxicity of ash wastes that collect in animal cells.     

Effect of vermicomposting on calcium, sulphur and some heavy metal content of different biodegradable organic wastes under liming and microbial inoculation

A study was conducted to evaluate the changes in total calcium and sulphur and some heavy metal (Zn, Cu, and Pb) concentration of different organic wastes affected by liming and microorganism inoculation. Vermicomposting was an effective technology for disposal of organic substrates like municipal solid wastes (MSW), possessing comparatively higher concentration of heavy metals. The addition of lime in initial organic substrates significantly (P ≤ 0.05) increased total calcium and total sulphur content of vermicomposts. Inoculation of microorganisms significantly (P ≤ 0.05) reduced the heavy metal content of final products as compared to control. Fungal strains were comparatively more effective in detoxification of heavy metals than B. polymyxa.     

矿区炼金废渣的固化/稳定化处理

通过对金矿矿区炼金废渣的酸中和能力、净产酸量及浸出毒性实验，测定了废渣的产酸潜力及重金属砷、镉、铅、锌的总量和它们的浸出量。为了合理处置矿区炼金废渣，并为矿区重金属污染土壤的修复提供技术支持，采用石灰、粉煤灰、堆肥化污泥作为添加剂对废渣进行固化/稳定化处理；通过浸出毒性实验对固化/稳定化处理效果进行综合分析，试图寻求一种最佳的稳定剂。结果表明，无论是单独添加石灰、粉煤灰或者堆肥化污泥还是两两组合混合添加，样品浸出液的pH都有升高，As、Cd的浸出浓度都有明显下降，而且两两组合添加比单独添加的固化/稳定化处理效果更好。在两两组合添加中，粉煤灰混合堆肥化污泥的处理效果最好，浸出液的pH值达到7.82，As、Cd的浸出率分别下降72.0%和72.2%。说明粉煤灰混合堆肥化污泥处理炼金废渣效果最佳，同时具有以废治污的资源化生态效能。     

Determination of the applicability of CERCLA's petroleum exclusion at contaminated sites – focus on metals

Areas impacted by petroleum refining and handling operations may become subject to CERCLA enforcement. Because of CERCLA's petroleum exclusion clause, determining whether contamination in a CERCLA Site originated from petroleum products or hazardous wastes becomes important. Because certain metals are typically enriched in wastes relative to petroleum products and background soils, knowledge of metal contents in these potential end member metal sources is an important step towards contaminant source identification in soils and sediments. In LNAPL plumes, metal content, particularly lead, may be claimed to be the result of wastes mishandling and not due only to the presence of leaded gasoline in the plume. Analysis of the percent gasoline in the plume and accounting for weathering are steps to determining whether the lead content in an LNAPL plume is within the historical lead concentration ranges in gasolines. In addition to metals analyses, understanding of operational parameters such as the history of petroleum refining and handling operations, leaks, spills, and cleanup activities are needed for successful conclusion of the applicability of the petroleum exclusion.     

Solidification/stabilisation of electric arc furnace waste using low grade MgO

This study aims to evaluate the potential of low grade MgO (LGMgO) for the stabilisation/solidification (S/S) of heavy metals in steel electric arc furnace wastes. Relevant characteristics such as setting time, unconfined compressive strength (UCS) and leaching behaviour assessed by acid neutralisation capacity (ANC), monolithic and granular leaching tests were examined in light of the UK landfill Waste Acceptance Criteria (WAC) for disposal. The results demonstrated that all studied mix designs with Portland cement type 1 (CEM1) and LGMgO, CEM1-LGMgO 1:2 and 1:4 at 40% and 70% waste addition met the WAC requirements by means of UCS, initial and final setting times and consistence. Most of the ANC results met the WAC limits where the threshold pH values without acid additions were stable and between 11.9 and 12.2 at 28 d.Granular leaching results indicate fixation of most of the metals at all mix ratios. An optimum ratio was obtained at CEM1-LGMgO 1:4 at 40% waste additions where none of the metals leaching exceeded the WAC limits and hence may be considered for landfill disposal.The monolithic leaching test results showed that LGMgO performed satisfactorily with respect to S/S of Zn, as the metal component present at the highest concentration level in the waste exhibited very little leaching and passed the leaching test requirement at all mix ratios studied. However, its performance with respect to Pb, Cd and Cr was less effective in reducing their leaching suggesting a higher cumulative rate under those leaching regimes.     

Effect of vermicomposting on calcium,sulphur and some heavy metal content of different biodegradable organic wastes under liming and microbial inoculation

A study was conducted to evaluate the changes in total calcium and sulphur and some heavy metal (Zn, Cu, and Pb) concentration of different organic wastes affected by liming and microorganism inoculation. Vermicomposting was an effective technology for disposal of organic substrates like municipal solid wastes (MSW), possessing comparatively higher concentration of heavy metals. The addition of lime in initial organic substrates significantly (P ≤ 0.05) increased total calcium and total sulphur content of vermicomposts. Inoculation of microorganisms significantly (P ≤ 0.05) reduced the heavy metal content of final products as compared to control. Fungal strains were comparatively more effective in detoxification of heavy metals than B. polymyxa.     

镍渣的重金属浸出特性

在分析镍渣的矿物相组成和重金属元素含量的基础上,鉴定了镍渣样品的浸出毒性,并考察了pH、液固比和浸出时间等条件对镍渣样中铬、铅、铜和锌等重金属浸出特性的影响。结果表明,镍渣中的重金属总量约为渣样的0.9%,且铬、铜和锌的含量较高,需进行安全管理。实验所用镍渣样品为第Ⅰ类一般工业固体废物。在强酸条件下镍渣中重金属浸出浓度较大,pH3后浸出浓度显著降低;液固比40 L/kg时,镍渣中重金属不断溶出,液固比40 L/kg后,浸出达到饱和,浸出浓度趋于平衡;随着浸出时间的增加,重金属离子的浸出浓度先增加后减少,但由于各重金属性质不同,各重金属达到最大浸出浓度的时间不同。     

城市污水污泥固结体重金属浸出毒性及路用性能研究

城市污水污泥的重金属离子Pb、Zn超过国家固体废弃物排放最高允许值,属于危险废物。污水污泥的最佳出路是无害化处理,资源化利用,产业化发展。研究了以上海市污水污泥为原料,加入一定比例的固化剂和矿物掺合料使之固结,经养护满足路用强度性能,测试其固结体重金属离子浸出质量浓度亦满足国家固体废弃物排放标准,即污泥中的重金属离子得到有效的束缚和稳定固化,既解决了环境问题,又为污泥产业化发展开辟了新的途径。     

Heat stress increases the efficiency of EDTA in phytoextraction of heavy metals

Solution culture and pot experiments were carried out to investigate the effects of root damage on phytoextraction of heavy metals. In hydroponics, roots of corn (Zea mays L.) seedlings were pretreated with heating stress, and then were exposed to 250 microM Pb+250 microM EDTA solutions for 7d. The results showed that the preheating treatment significantly increased Pb transportation from roots to shoots. In pot experiments, the effect of hot EDTA solution (95 degrees C) on the accumulation of heavy metal in the shoot of corn and pea (Pisum sativum L.) was also examined. Compared to normal EDTA (25 degrees C) treatment, application of hot EDTA solution to the soil surface increased the total removal of Pb in shoots of corn and pea by about 8- and 12-fold, respectively, in an artificially multimetal-contaminated soil. In addition, hot EDTA solution increased the shoot Cu removal by about 6-fold for corn and 9-fold for pea, respectively, in a naturally Cu-contaminated soil. These results suggested that exposure of roots to high temperature could increase the efficiency of EDTA on the accumulation of heavy metals in shoots. This new approach can help to minimize the amount of chelate applied in the field and reduce the potential risk of heavy metals' leaching.     

Assessment of the content,occurrence, and leachability of arsenic,lead, and thallium in wastes from coal cleaning processes

The aim of the study was to evaluate the content, occurrence, and leachability of arsenic (As), lead (Pb), and thallium (Tl) in wastes from coal cleaning processes with respect to the safe management of this waste. The study focused on wastes resulting from the wet gravitation and flotation processes employed for the purposes of coking coal cleaning in four coal mines situated in the Upper Silesian Coal Basin (Poland). The scope of the study included (i) determination of the content of these elements in the investigated wastes using atomic absorption spectrometry, (ii) evaluation of their mode of occurrence using electron microprobe analysis, and (iii) preliminary assessment of their leachability in deionized water. The content of the analyzed elements in the examined samples of coal waste was twice as high as the average content of these elements in the Earth’s crust. The contents of As and Pb, however, did not exceed their permissible contents in inert waste in accordance with Polish legal regulations based on EU directives. The limit on the content of Tl is not specified by these regulations, but its amount in the examined samples was similar to that occurring in the soils. Moreover, leaching tests have shown that these elements are hardly eluted from the analyzed material. Their content in the water leachates was generally lower than the detection limit of the analytical method, complying with the standards for good and very good water quality. Low leachability of these elements most probably results from their mode of occurrence in the investigated wastes. The chemical analysis using an electron microprobe and the analysis of the correlation between these elements, e.g., total and pyritic sulfur, have shown that Pb, As, and Tl are mainly found in sulfide minerals which are characterized by negligible solubility. In conclusion, the investigated hard coal processing waste does not constitute a threat to the environment and can be commercially used or safely neutralized, e.g., by landfilling.

     

Application of coupled thermostatted columns in civil engineering and for leaching heavy metals of wastes from foundry sands and mining industry

For many years, the mining industry at Pachuca Hidalgo, Mexico, has produced silver and gold through a cyanide process. Solid wastes (tailings) of this process have been deposited close to centres of population. Many of the metals in these wastes are dispersed via wind and rain, and can be toxic to flora and fauna. Foundry sands are wastes, produced by the automotive industry, the metallurgy industry and others, which are contaminated with many metals such as Fe, Cr, Zn, Pb, Au Ag, Ti, Ge, Co, As, Al, etc. We have previously patented a process for the extraction of toxic and valuable metals from foundry sands using a thermostatted column. The results of this study indicate that the process and the device could be used for removing heavy metals from tailings. In this research both types of waste (foundry sands and tailings) were leached using four coupled thermostatted columns. The presence of heavy metals in the solid wastes was studied using the ICP-AS technique and scanning electron microscopy, and to study the structure we used X-ray diffraction. After leaching we used the solid wastes (without toxic metals) to produce bricks. The mechanical properties of the bricks were assessed against international standards.     

Effect of an organic amendment on availability and bio-accessibility of some metals in soils of urban recreational areas

A composted biosolid from wastewater treatment was added to soils of two public parks of Sevilla, and successive samples were taken during one year. In one of the parks, a second addition of biosolid was carried out after the first year. The soil contents in metals (pseudo-total) and their plant-available and oral bio-accessible fractions were significantly altered when the soils were amended with biosolid. Increase of the bio-accessible metal contents represents a deterioration of the environmental quality of recreational areas, where hand-to-mouth transfer of pollutants to children is likely to occur, although part of the metals added might be leached by rainfall or irrigation. The limits established in several countries for metal contents of soils in recreational areas are often exceeded after application of the biosolid. A careful study of the metal contents of recycled wastes is thus recommended before being used for green area maintenance.     

电镀污泥的热处理特性以及对金属回收的影响

焙烧-酸浸法可有效回收电镀污泥中的有价金属,而污泥的热处理特性是决定能否采用焙烧预处理的重要因素。研究了氧化焙烧和还原焙烧对污泥成分和金属浸出性的影响,并对焙烧前后的污泥进行了金属形态分析和X射线衍射(XRD)分析。结果表明,焙烧预处理实现了污泥减量和金属富集;ES1经氧化焙烧后金属浸出率接近原泥,Cu的浸出率达99%;ES2的还原焙烧效果优于氧化焙烧,特别是Cu的浸出率超过97%,XRD分析发现,还原焙烧过程中金属Cu被还原为铁铜合金;2种焙烧均造成了ES3中目标金属Ni的浸出率的降低;金属浸出性的下降与残渣态的形成有关。     

Remediation of heavy metal polluted sediment by suspension and solid-bed leaching: estimate of metal removal efficiency

Remediation of heavy metal polluted sediment by extracting the metals with sulfuric acid can be performed as follows: abiotic suspension leaching, microbial suspension leaching, abiotic solid-bed leaching, and microbial solid-bed leaching. Abiotic leaching means that the acid is directly added, while microbial leaching means that the acid is generated from sulfur by microbes (bioleaching). These four principles were compared to each other with special emphasis on the effectiveness of metal solubilization and metal removal by subsequent washing. Abiotic suspension leaching was fastest, but suspending the solids exhibits some disadvantages (low solid content, costly reactors, permanent input of energy, high water consumption, special equipment required for solid separation, large amounts of waste water, sediment properties hinder reuse), which prevent suspension leaching in practice. Abiotic solid-bed leaching implies the supply of acid by percolating water which proceeds slowly due to a limited bed permeability. Microbial solid-bed leaching means the generation of acid within the bed and has been proven to be the only principle applicable to practice. Metal removal from leached sediment requires washing with water. Washing of solid beds was much more effective than washing of suspended sediment. The kinetics of metal removal from solid beds 0.3, 0.6 or 1.2m in height were similar; when using a percolation flow of 20lm(-2)h(-1), the removal of 98% of the mobile metals lasted 57-61h and required 8.5, 4.2 or 2.3lkg(-1) water. This means, the higher the solid bed, the lower the sediment-mass-specific demand for time and water.     

Comparison of the characteristics of flow-through and flow-around leaching tests of Solidified heavy metal wastes

This paper introduces a research work on studying the possibility of using a flow-through leaching test method to simulate the leaching behaviour of the cement-based stabilized/solidified (S/S) hazardous wastes. Both the flow-through leaching and the more common flow-around (dynamic leaching) test methods were carried out in the study to compare the leaching behaviour of the solidified waste under different leaching environments. The solidified waste samples were prepared from five kinds of heavy metals with two kinds of binders. The metals were Pb2+, Zn2+, Cu2+, Ni2+ (positive ions as nitrate), and Cr6+ (as a negative ion in potassium dichromate), and the binders were type I Ordinary Portland Cement (OPC) and Pulverised Fuel Ash (PFA). The results of two series of flow-through and flow-around leaching experiments are reported and compared in this paper. Mathematical models for simulating the leaching behaviour of the flow-through and flow-around leaching conditions were used to determine the diffusivities of the contaminants. The results show that, since the matrix of the solid waste in a flow-through leaching test is always being degraded, the diffusivities continuously increased during the leaching period. The range of the diffusivities was 10E-8 to 10E-3 cm2/s, which corresponds to the case of liquid phase diffusion. But in the case of the flow-around (dynamic leaching) test, the range of the diffusivities was 10E-18 to 10E-9 cm2/s which was similar to solid phase diffusion, and the variation of the diffusivity with time was not regular.     

Impacts of pH and ammonia on the leaching of Cu(II) and Cd(II) from coal fly ash

Many coal-fired power plants are implementing ammonia-based technologies to reduce NO(x) emissions. Excess ammonia in the flue gas often deposits on the coal fly ash. Ammonia can form complexes with many heavy metals and change the leaching characteristics of these metals. This research tends to develop a fundamental understanding of the ammonia impact on the leaching of some heavy metals, exemplified by Cu(II) and Cd(II), under different pH conditions. Batch results indicated that the adsorption is the main mechanism controlling Cu(II) and Cd(II) leaching, and high concentrations of ammonia (>5,000 mg/l) can increase the release of Cu(II) and Cd(II) in the alkaline pH range. Based on the chemical reactions among fly ash, ammonia, and heavy metal ion, a mathematical model was developed to quantify effects of pH and ammonia on metal adsorption. The adsorption constants (logK) of Cu(2+), Cu(OH)(+), Cu(OH)(2), and Cu(NH(3))(m)(2+) for the fly ash under investigation were respectively 6.0, 7.7, 9.6, and 2.9. For Cd(II), these constants were respectively 4.3, 6.9, 8.8, and 2.6. Metal speciation calculations indicated that the formation of less adsorbable metal-ammonia complexes decreased metal adsorption, therefore enhanced metal leaching.     

污水污泥中重金属污染物的溶出过程研究

污水污泥中污染物尤其是重金属的水体浸出作为重要的二次污染途径备受关注。为了探讨污水污泥中重金属的溶出规律,对上海7个污水处理厂的污水污泥进行了重金属总量分析,并采用水平振荡法对上述污水污泥中重金属进行了溶出动力学研究。结果表明,污水污泥中Cu、Cr和Zn的含量均较高,之后依次是Pb、As、Cd和Hg;污水污泥中重金属溶出动力学过程分为快速反应和慢速反应两个过程,可以用Elovich方程进行模拟;污水污泥中各重金属的溶出负荷差异较大,Cu、Cr和Zn的溶出负荷较大,其他较小,但各重金属相对于污水污泥中重金属总量的溶出百分比差异不大,基本处于10%以下。     

Thermal Encapsulation of Metals in Superfund Soils

Abstract

Superfund sites frequently contain both heavy metals and organic hazardous waste. If not properly controlled, the metals may be changed to a more leachable form and may also be emitted to the atmosphere via the exhaust stack. This paper documents a batch kiln R&D test program to solve these metal-related problems. It was performed under the U.S. EPA’s SITE (Superfund Innovative Technology Evaluation) Emerging Technology Program. Allis Mineral Systems has developed the Thermal Encapsulation Process. Metals with limits set by EPA’s TCLP (Toxicity Characteristic Leaching Procedure) test and BIF (boiler and industrial furnace) stack emission regulations, such as cadmium, chromium, and lead, are the initial target of this process. This process, while unproven in these areas, may also apply to mixed waste (EPA hazardous waste/low-level radioactive wastes) and may also benefit commercial hazardous waste or Superfund thermal treatment systems. The results of the SITE tests were positive: strong, durable nodules were produced with excellent crush strength and improved resistance to leaching. Feed preparation, particularly control of moisture content, was found to be a key element in initiation of agglomeration. A good correlation was found between decreasing TCLP metals leachate levels and increasing crush strength.     

Leaching behaviour of Cd, Cu, Pb and Zn in surface soils derived from dredged sediments

Leaching of heavy metals from land-disposed dredged sediment spoils is a potential environmental hazard. The leaching behavior of Cd, Cu, Pb and Zn in surface soils sampled from abandoned dredged sediment disposal sites was assessed. Using simple mass-balance calculations, the significance of the leaching test results with respect to metal migration into underlying clean soil was appraised. The potential leachability, defined as the amounts released at constant pH 4, decreased in the order (% of total contents): Zn (58%) approximately equal to Cd (49%)>Cu (5%) approximately equal to Pb (2%). The kinetics of metal release were determined in a cascade shaking test using de-mineralized water acidified to pH 4 (HNO(3)). Metal concentrations in the leachates were low and metal migration was, assuming uniform convective flow, predicted to be of no environmental concern. It is emphasized that any long-term prediction of metal migration is uncertain.