共查询到20条相似文献，搜索用时 46 毫秒
1.
Heavy metals in untreated/treated urban effluent and sludge from a biological wastewater treatment plant 总被引：1，自引：0，他引：1
Oliveira Ada S Bocio A Trevilato TM Takayanagui AM Domingo JL Segura-Muñoz SI 《Environmental science and pollution research international》2007,14(7):483-489
Background, Aim and Scope
The presence of heavy metals in wastewater is one of the main causes of water and soil pollution. The aim of the present study was to investigate the removal of Cd, Cu, Pb, Hg, Mn, Cr and Zn in urban effluent by a biological wastewater treatment, as well as to quantify the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sn, Tl, V and Zn in dewatering sludge from the Biological Wastewater Treatment Plant to Ribeirão Preto (RP-BWTP), Brazil.Materials and Methods
Concentrations of Cd, Cr, Cu, Mn and Pb in wastewater and those of Ni in sludge were determined by atomic absorption spectrophotometry with graphite furnace atomization. Mercury concentrations in wastewater were measured by hydride generation atomic spectrophotometry, and Zn levels were determined by atomic absorption spectrophotometry using acetylene flame. In sludge, the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Sn, Tl, V and Zn were determined by inductively coupled plasma-mass spectrometry.Results
The percentages of removal efficiency (RE) were the following: Hg 61.5%, Cd 60.0%, Zn 44.9%, Cu 44.2%, PB 39.7%, Cr 16,5% and Mn 10.4%. In turn, the mean concentrations (mg/kg) of metals in dewatering sludge followed this increasing order: Tl (<0.03), Hg (0.31), Be (0.43), As (1.14), Cd (1.34), V (59.2), Pb (132.1), Sn (166.1), Cr (195.0), Mn (208.1), Ni (239.4), Cu (391.7), Zn (864.4) and Fe (20537).Discussion
The relationship between metal levels in untreated wastewater, as well as the removal efficiency are in agreement with previous data from various investigators, It is important to note that metal removal efficiency is not only affected by metal ion species and concentration, but also by other conditions such as operating parameters, physical, chemical, and biological factors.Conclusions
Metal values recorded for treated wastewater and sludge were within the maximum permitted levels established by the Environmental Sanitation Company (CETESB), São Paulo, Brazil.Recommendations
There is an urgent need for the authorities who are responsible for legislation on sludge uses in agriculture of establishing safety levels for As, Be, Hg, Sn, Tl and V.Perspectives
According to the current metal levels, RP-BWTP sludge might be used for agriculture purposes. However, for an environmentally safe use of sewage sludge, further studies including systematic monitoring are recommended. Annual metal concentrations and predicted variations of those elements in the sludge should be monitored.2.
Teodor Velea Liliana Gherghe Vasile Predica Rolf Krebs 《Environmental science and pollution research international》2009,16(1):27-32
Background, aim, and scope
Heavy metals such as lead are well known to cause harmful health effects. Especially children are particularly susceptible to increased levels of lead in their blood. It is also a fact that lead concentration is increasing in the environment due to increased anthropogenic activity. The risk of heavy metal contamination is pronounced in the environment adjacent to large industrial complexes. In a combined case study, the environmental pollution by heavy metals was related to children’s health in the vicinity of an industrial area located 4 km south-east from Bucharest about 2 km east from the nearest town—Pantelimon. This site includes companies processing different, nonferrous solid wastes for recovery of heavy metals and producing different nonferrous alloys and lead batteries. In this paper, mainly the results of environmental sampling and analyses are summarized.Materials and methods
Water, soil, and atmospheric deposition samples were collected from different locations within 3 km from the industrial area. For comparison, samples were also taken from Bucharest. Water samples were filtered (<0.45 μm), extracted by salpetric acid, and quantified by ICP-OES and ICP-MS. Soil samples were dried, sieved (<2 mm), extracted by aqua regia and analyzed by AAS. In order to quantify the atmospheric deposition, three kinds of permanently open collecting pots were used on nine different sites between August and November 2006.Results
At most sampling locations, the heavy metal concentrations in soil decrease with increasing distance to the presumably major source of pollution. Highest heavy metal concentrations were found in 10–20 cm soil depths. There were also decreasing heavy metal concentrations for atmospheric deposition with increasing distance to the industrial site. In surface and groundwater samples, traces of zinc, copper and lead were detected.Discussion
The heavy metal concentrations in soil were increased in the study area, mostly under legal action limits in low-concern areas (e.g., 1,000 mg Pb/kg dry soil), but often above action limits for high-concern areas (100 mg Pb/kg dry soil) such as populated areas. The soluble lead concentrations in water samples indicate a need for monitoring and assessing water quality in more detail. The results for atmospheric deposition showed increased dust precipitation and heavy metal loads in the study area compared to Bucharest. However, based on mass flow balance calculations, the actual atmospheric deposition of heavy metals must be much lower than it was in the past decades.Conclusions
It was shown that highest lead values in water, soil and atmospheric deposition are rather to be found near the investigated industrial site than at the control sites in Bucharest. Our results correspond very well with results that show that children from Pantelimon have significantly increased lead concentrations in their blood compared to children in Bucharest. The increased lead contamination around the investigated industrial area is likely to have caused the increased exposure for children living in Pantelimon.Recommendations and perspectives
In high-concern areas, such as found in populated areas, further measures have to be taken to avoid health risks for people living in these areas. The measures already taken to reduce emissions from the industrial site will help to avoid further increases in heavy metal concentrations. In areas with exceeded action limits, measures have to be taken as required by law. Detailed risk assessments could help to take necessary actions to protect public health in this area. The public should be informed about the potential hazards of eating plants grown in that area. Educational programs for schools, informing children about the contamination, should lead to a better understanding of environmental problems and a more sustainable behavior in the future.3.
Lützhøft HC Donner E Wickman T Eriksson E Banovec P Mikkelsen PS Ledin A 《Environmental science and pollution research international》2012,19(4):1119-1130
Purpose
Implementation of current European environmental legislation such as the Water Framework Directive requires access to comprehensive, well-structured pollutant source and release inventories. The aim of this work was to develop a Source Classification Framework (SCF) ideally suited for this purpose.Methods
Existing source classification systems were examined by a multidisciplinary research team, and an optimised SCF was developed. The performance and usability of the SCF were tested using a selection of 25 chemicals listed as priority pollutants in Europe.Results
The SCF is structured in the form of a relational database and incorporates both qualitative and quantitative source classification and release data. The system supports a wide range of pollution monitoring and management applications. The SCF functioned well in the performance test, which also revealed important gaps in priority pollutant release data.Conclusions
The SCF provides a well-structured approach for European pollutant source and release classification and management. With further optimisation and demonstration testing, the SCF has the potential to be fully implemented throughout Europe.4.
Gerhardt A 《Environmental science and pollution research international》2007,14(6):430-434
Goal, Scope and Background
Lumbriculus variegatus Müller (Oligochaeta), a common freshwater sediment-dweller, has frequently been used in toxicokinetic studies, although has been less used in ecotoxicity tests.Methods
For the first time the Multispecies Freshwater Biomonitor® (MFB) was applied in a short-term whole-sediment toxicity test. The MFB automatically and quantitatively recorded the spontaneous locomotory behaviour of Lumbriculus variegatus in exposures with two compartments, water and sediment. The study questioned, whether the animals altered their locomotion depending on the compartment which was spiked with lead (Pb).Results and Discussion
As in the exposures to Pb-contaminated water/clean sediment, the animals exposed to Pb-contaminated sediment/clean water showed higher activities in intermediate Pb-concentrations. This indicates, that spontaneous locomotory activity is affected by Pb-concentrations at sublethal levels regardless of whether the Pb-concentration is found in the water or in the sediment, because these animals use both environmental compartments simultaneously. However, within the same Pb-levels, the animals showed higher locomotory activity in contaminated water compared with contaminated sediment. This indicates a possible tendency to withdraw from (‘avoidance’) contaminated water into the clean sediment compartment, whereas there was no withdrawal from contaminated sediment into clean water. The latter might be explained by the fact that withdrawal from sediment to water might increase the risk of predation and drift in nature, whereas retracting to sediment might provide shelter.Conclusions
The study showed that spontaneous locomotory responses of L. variegatus to Pb depend on whether the water or sediment is contaminated. The study also concluded that the Multispecies Freshwater Biomonitor® can be applied effectively in sediment toxicity testing.Recommendations and Perspectives
More emphasis should be given to the interactions of water/sediment in sediment ecotoxicity tests to better simulate field conditions and increase ecological realism in risk assessment, especially as quantitative recording methods exisit.5.
Cotelle S Testolin RC Foltête AS Bossardi-Rissardi G Silveira RA Radetski CM 《Environmental science and pollution research international》2012,19(3):628-635
Background, aim, and scope
Assessment of environmental impacts from pesticide utilization should include genotoxicity studies, where the possible effects of mutagenic/genotoxic substances on individuals are assessed. In this study, the genotoxicity profile of the new formicide Macex® was evaluated with two genotoxicity tests, namely, the micronucleus test with mouse bone marrow and Vicia faba, and a mutagenicity test using the Ames Salmonella assay.Materials and methods
The bacterial reverse mutation test (Salmonella typhimurium strains TA97, TA98, TA100, TA102, and TA1535), the Vicia root tip and mouse micronucleus tests were conducted according to published protocols.Results
In the range of the formicide Macex® concentrations tested from 0.06 to 1.0 g?L?1 (or mgkg?1 in the mouse test), no genotoxicity was observed in the prokaryotic or eukaryotic test organisms. However, at Macex® concentrations of 0.5 g?L?1 and above a significant decrease in the mitotic index (P?≤?0.05) in the V. faba was observed. Micronucleus formation was likewise increased in the test organism at concentrations starting at 2.0 g?L?1.Conclusions
These data allow us to classify this natural formicide preparation as a product with no geno-environmental-impact when applied at recommended concentrations.6.
Background
The November 1, 1986 fire at a Sandoz Ltd. storehouse at Schweizerhalle, an industrial area near Basel, Switzerland, resulted in chemical contamination of the environment. The storehouse, which was completely destroyed by the fire, contained pesticides, solvents, dyes, and various raw and intermediate materials. The majority of the approximately 1,250 t of stored chemicals was destroyed in the fire, but large quantities were introduced into the atmosphere, into the Rhine River through runoff of the fire-fighting water, and into the soil and groundwater at the site. The chemicals discharged into the Rhine caused massive kills of benthic organisms and fish, particularly eels and salmonids. Public and private reaction to the fire and subsequent chemical spill was very strong. This happened only a few months after the Chernobyl accident and it destroyed the myth of immunity of Switzerland regarding such catastrophes.Aim
This article reviews the damaging events of November 1986 and aims at striking stock two decades later.Results and discussion
In the aftermath of this once-per-century accident, the aim was to obtain new knowledge for the environmental sciences and to achieve progress for water pollution control issues. The following themes are discussed: mitigation measures by the chemical industry and by the governmental authorities, activities of environmental protection organizations, chemical and biological monitoring, alert organization, ecological damages, ecotoxicological effects assessment, recovery and alteration of the river biology, return of the salmon, drinking water supplies, research programs, education of environmental scientists, and visions for the future.Conclusions
The catastrophic pollution of the Rhine in November 1986 has triggered by the openly visible damages of the river biology that subsequently significant progress was made towards the prevention of such environmental catastrophes. The crucial risk reduction measures in the chemical industry, legal regulations and controls as well as chemical and biological monitoring of the river water quality were substantially improved. Politics and chemical industry have learned their lectures and have proceeded accordingly.Recommendations
A drastic acute contamination, as it has happened at Schweizerhalle in 1986, is clearly recognizable by the toxic effects, which it is causing. This can lead to mitigation activities, which are positive considering a long-term perspective. However, the less obvious effects of chronic water pollution should receive more attention as well as the ongoing alteration of the biocenosis. A high water quality must be demanded for using water from the Rhine to produce drinking water. In that context, micropollutants should also be considered and particular attention should be payed to emerging contaminants.Perspectives
The big chemical storehouse fire of 1986 had an important impact on the transboundary cooperation and has improved the willingness for international cooperation. The fire catastrophe of Schweizerhalle has triggered many activities in particular for the Rhine River. Overall, the effects are positive on the basis of a long-term perspective. The applied whole basin approach gives an example on a global basis for other river systems, which still are more heavily polluted.7.
Stefan Böschen 《Environmental science and pollution research international》2009,16(5):508-520
Background, aim, and scope
Over the last two decades, there has been a remarkable shift of attention to the scientific and political fundamentals of the precautionary principle. The application of this principle has become a main strategy of coping with the different forms and problems related to non-knowledge. Thus, societies are increasingly confronted with the challenging and hitherto unresolved problem of political and technological decision-making under conditions of diverging framings of non-knowledge. At present, there seems to be no generally accepted scientific or institutional approach. This is why the fundamental question of how different scientific actors define and construct evidence is not answered yet. Hence, this paper is based on the consideration that the conflicts in risk policy concerning genetically modified organisms (GMO) depend on the unresolved conflicts about the diverging scientific strategies and structures of evidence-making between the epistemic cultures involved. Thus, this study investigates two questions: (1) do the epistemic strategies of evidence-making differ systematically with the scientific actors involved in the GMO-debate? (2) What consequences emerge considering institutionalized procedures of decision-making?Main features
This article is based on a secondary analysis of findings and perspectives reported in the literature and on the methods of qualitative social empirical research, i.e., interviews with experts. A total number of 34 interviews were conducted to explore the different strategies of handling non-knowledge and constructing evidence. Actors from science, administration, business and NGOs were interviewed. In this way, typical epistemic cultures can be described. An epistemic culture is the constellation of methodological strategies, theoretical assumptions and practical-experimental settings which define in every speciality the ways how we know what we know.Results
There are two main results. Firstly, it was worked out that the epistemic cultures involved in the GMO-debate use rather distinct strategies to define non-knowledge and to classify evidence. There are three types of constructing evidence, which correspond to different types of epistemic cultures. Secondly, the findings imply that the intensity of the conflicts in risk policy fields like the GMO-debate is due to a lack of knowledge politics. Usually, knowledge politics is restricted to the design of institutional procedures to compile knowledge provided by experts. The institutional setting of risk analysis and risk management is based on the premise of strict separation between knowledge and power. However, inadmissible mixing-up of knowledge and power is observable.Discussion
It seems that non-knowledge leads to an epistemic no man’s land, and, hence, hybrid regimes of knowledge emerge. These regimes are hybrid with respect to the unclear and not explicitly reflected strategies of evidence-making. By lacking of knowledge politics, this situation opens up ‘windows of opportunity’ for actors with special interests in risk policy fields like the GMO-debate. Therefore, there is a difference between the visible institutionalized structures of risk policies and the rather invisible hybrid regimes of knowledge. Structure and scope of expertise have to be reflected and new instruments of knowledge politics have to be designed.Conclusions
Different epistemic cultures can be qualified by describing their particular strategies of evidence-making. To solve the conflicts between these strategies, a meta-expertise is needed. Besides the institutionalized settings of knowledge politics, the underlying hybrid regimes of knowledge have to be identified.Recommendations and perspectives
The concept of epistemic cultures and their strategies of evidence-making should be investigated more explicitly with respect to other risk policy fields The analysis of hybrid regimes of knowledge should be deepened by looking at the complex interactions between institutional, discursive and practical rules affecting risk assessment.8.
Purpose
The most significant application of polychlorinated biphenyls (PCBs) is in transformers and capacitors. Therefore, power plants are important suspected sources for entry of PCBs into the environment. In this context, the levels and distribution of PCBs in sediment, soil, ash, and sludge samples were investigated around Seyitömer thermal power plant, Kütahya, Turkey. Moreover, identity and contribution of PCB mixtures were predicted using the chemical mass balance (CMB) receptor model.Methods
United States Environmental Protection Agency methods were applied during sample preparation, extraction (3540C), cleanup (3660B, 3665A, 3630C), and analysis (8082A).Results
ΣPCB concentrations in the region ranged from not detected to 385 ng/g dry weight, with relatively higher contamination in sediments in comparison to soil, sludge, and ash samples collected from around the power plant. Congener profiles of the sediment and soil samples show penta-, hexa-, and hepta-chlorobiphenyls as the major homolog groups. The results from the CMB model indicate that PCB contamination is largely due to Clophen A60/A40 and Aroclor 1254/1254(late)/1260 release into the sediment and sludge samples around the thermal power plant.Conclusions
Since there are no other sources of PCBs in the region and the identity of PCB sources estimated by the CMB model mirrors PCB mixtures contained in transformers formerly used in the plant, the environmental contamination observed especially in sediments is attributed to the power plant. Release of PCBs over time, as indicated by the significant concentrations observed even in surface samples, emphasizes the importance of the need for better environmental management.9.
Introduction
Several hot spots of severe freshwater pollution and sediment contamination (mostly heavy metals, polyaromatic hydrocarbons and polychlorinated biphenyls) have been identified in Serbia as the consequence of outdated environmental legislation, negligible amounts of properly treated waste waters and accidental spills.Discussion
Since ecotoxicological methods have never been incorporated into risk assessment procedures, mandatory effluent discharge or ambient water monitoring programmes, ecotoxicological research, based on bioaccumulation studies, conventional ecotoxicological tests and, recently, biomarkers of exposure and effect have been restricted to independent small- to medium-scale studies, conducted, basically, to confirm, underline or oppose the results of chemical-based monitoring and to lament on inadequate environmental regulations/policy and management practice. Although hot and unresolved ecotoxicological problems still remain beyond the reach of ecotoxicological research currently conducted in Serbia, or are tackled only sporadically, it is to be expected that on-going research and institutional capacity building should, hopefully, increase the competence and competitiveness of scientific community and speed up the process of harmonisation of national environmental legislation and policy with European Union.10.
Introduction
This paper is in response to criticism of our article “The human sex odds at birth after the atmospheric atomic bomb tests, after Chernobyl, and in the vicinity of nuclear facilities” published in Environ Sci Pollut Res 18(5):697–707, 2011.Methods
Our findings and methods concerning the disturbed human sex odds at birth have been criticized in this journal for being artifacts of data mining, that the concept of statistical significance was misunderstood, and that confounding factors have not been accounted for. Here, we show that this criticism has no basis. We applied well-established statistical methods to large official data sets, and confounding is less important at the level of secular sex odds trends in aggregated annual figures from countries or continents.Results and conclusions
Moreover, our results are strengthened by recent findings concerning increased infant death sex odds in Germany and increased Down syndrome prevalence at birth across Europe after Chernobyl. Prompted by our studies, an official investigation in Lower Saxony, Germany, by the “Niedersächsisches Landesgesundheitsamt (NLGA)” confirmed our observation of severely escalated sex odds within 40 km distance from the nuclear storage site in Gorleben, Germany.11.
Obiri S Cobbina SJ Armah FA Naangmenyele Z 《Environmental science and pollution research international》2011,18(7):1166-1173
Objective
Concentrations of polycyclic aromatic hydrocarbons (PAHs) in street dust in the Tamale metropolis, Ghana, have been measured in this study.Results
The concentrations of the various types of PAHs identified in street dust samples from high vehicular traffic density in the metropolis are as follows: naphthalene, 10,000 μg/kg; acenaphthylene, 13,000 μg/kg; acenaphthene, 76,000 μg/kg; fluorene, 18,900 μg/kg; phenanthrene, 40,000 μg/kg; anthracene, 21,000 μg/kg; fluoranthene, 35,200 μg/kg; pyrene, 119,000 μg/kg; benzo[a]anthracene, 17,700 μg/kg; chrysene, 10,600 μg/kg; benzo[k]fluoranthene, 18,700 μg/kg; benzo[a]pyrene, 10,900 μg/kg and benzo[g, h, i]perylene, 21,000 μg/kg. Calculation of the phenanthrene/anthracene ratio indicated that the PAHs identified in this study were from vehicular fallout as the ratio was less than 10.Conclusion
It is clear from the results of the study that road users in the Tamale metropolis, especially hawkers, are exposed to the harmful effects of PAHs, and this suggests the need for the establishment of mitigation measures by the regulatory agencies.12.
Razinger J Dermastia M Drinovec L Drobne D Zrimec A Koce JD 《Environmental science and pollution research international》2007,14(3):194-201
Goal, Scope and Background
Elevated concentrations of copper in the environment result in accumulation of the metal in plants and cause an increase in reactive oxidative species (ROS). The first response to elevated amounts of ROS is increased levels of enzymatic and non-enzymatic antioxidants that reduce oxidative stress. The aim of our study was to evaluate the early stages of antioxidative responses to the low copper concentrations usually present in moderately polluted environments. In addition, some other parameters were examined to evaluate the effect of copper on plants.Methods
Duckweed (Lemna minor L.) was exposed to different concentrations of copper sulphate for up to 24 hours. Glutathione concentration and enzymatic activities of catalase, guaiacol peroxidase and glutathione reductase were measured spectrophotometrically. Additionally, delayed and prompt chlorophyll fluorescence was measured by luminometry and fluorometry, respectively. The accumulation of copper in plants exposed for 24 hours to various concentrations of copper sulphate was measured by flame atomic absorption spectrophotometry.Results
The treatment of plants with copper sulphate resulted in an immediate decrease of the glutathione pool, which was replenished after 24 hours at CuSO4 concentrations lower than 2 μM. Higher CuSO4 concentrations caused a decrease of reduced glutathione. The responses of the antioxidant enzymes glutathione reductase, guaiacol peroxidase and catalase to CuSO4 differed during the first six hours of exposure, but their enzyme activities all increased after 24 hours of exposure. All these enzymes displayed biphasic activity curves with maximum values between 0.5 μM and 1 μM CuSO4. The response of guaiacol peroxidase was the most pronounced and statistically significantly specific and that of catalase the least. Delayed chlorophyll fluorescence decreased after exposure to 1 μM CuSO4, but no significant effect on maximum quantum yield of photosystem II (Fv/Fm) was observed. L. minor accumulated relatively high concentrations of copper. The accumulation rate was higher at lower concentrations of copper in the test medium (up to 2 μM CuSO4) than at concentrations above 2 μM CuSO4.Discussion
One of the most pronounced antioxidative responses to copper exposure was modified levels of oxidized and reduced forms of glutathione. The decrease of the glutathione pool is most probably coupled with induced production of phytochelatins. Antioxidative enzymes showed the biphasic enzyme activity characteristic of stress response. Guaiacol peroxidase exhibited the greatest significant increase of activity, even at higher CuSO4 concentrations at which the activity of catalase and glutathione reductase dropped. The intensity of delayed chlorophyll fluorescence decreased, indicating reduced photosynthesis of plants under stress. All the measured parameters showed that plants respond to even low copper concentrations very soon after exposure. The accumulation rate of copper in duckweed tissues indicates that L. minor is an accumulator species.Conclusions
The synchronized and prompt inducibility of antioxidants indicates their involvement in a general plant defence strategy for coping with metal-induced oxidative stress. Glutathione concentration and guaiacol peroxidase activity were found to be the most sensitive of the early indicators of exposure to copper concentrations present in polluted water bodies.Recommendation and Perspectives
The experimental design of the present study allowed us to compare the sensitivity of various methods and parameters for detecting plant responses to heavy metal-induced oxidative stress. The level of glutathione and the enzyme activities of guaiacol peroxidase and glutathione reductase could be used as a rapidly determined early warning system in toxicity studies.13.
Background
In this review, the position of behavioural ecotoxicology within the available means to assess the status of marine environments is described as filling the gap for the needed “early warning” signals. A few examples of studies performed since the 1960s are discussed to highlight the sensitivity of these approaches in investigating the effects of chemicals, including priority pollutants and emerging contaminants, relative to conventional toxicity tests measuring survival.Discussion
The advantage of the behavioural response is due to the integration of biochemical and physiological processes that reflect changes at higher levels of organisation with ecological relevance. Avoidance often represents a behavioural symptom easily detected in many animals exposed to contaminants and would be a useful test to explore more widely. This rapid response would reflect a defence mechanism protective against further exposure and the potential development of more pronounced deleterious effects, whilst in some cases, escape could lead to the relocation of a species with negative consequences. An investigation of the avoidance behaviour of mud shrimp, Corophium volutator, along with the chemical analyses of sediments and amphipods to assess the quality of harbour sediments is summarised. The body burden of the amphipods was 1,000 times lower than the one associated with narcosis, emphasizing the sensitivity of this endpoint. The application of this acute toxicity test is briefly compared to additional work that involved intertidal mussels collected in the field.Conclusions
Recent research undertaken with mud snails, Ilyanassa obsoleta, and harbour sediments confirmed the usefulness of the escape behaviour as an assessment tool. However, the limits of the state of knowledge regarding the fate of contaminants in species with the ability to metabolise contaminants is further discussed along with directions to be pursued to address questions arising from the reviewed literature.14.
Background, aim, and scope
According to their high sorption capacity polyethylene (PE) passive samplers are often used for the analysis of polycyclic aromatic hydrocarbons (PAHs) in the aquatic environment. PE is also one of the primary synthetic polymers found in oceans, and sorption of PAHs to marine PE debris may determine PAH exposure and therefore hazards in marine ecosystems. Thus, an understanding of the sorption process is of great importance. In the present study, the sorption of several PAHs with different polarities to low density polyethylene (LDPE) and high density polyethylene (HDPE) was studied in order to improve our understanding of the influence of material properties on the Fickian diffusion of PAHs into PE.Materials and methods
Batch sorption experiments were performed with aqueous solutions containing acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, and LPDE or HDPE pellets. Samples were shaken in the dark at 20?±?1°C for 16 time intervals within one week. Concentrations of PAHs were determined in the aqueous samples using solid-phase microextraction coupled with gas chromatography–mass spectrometry. The distribution coefficients (K PE) between PE and water were estimated from different models reported in the literature. Kinetic sorption of the PAHs into the plastic pellets was described by a diffusion model based on Fick’s second law in spherical coordinates.Results and discussion
A comparison between different models describing the equilibrium distribution of PAHs between PE and water revealed that the sorption equilibrium seemed to be driven by parameters other than, or in addition to, organic carbon. For both plastic types, diffusion coefficients decreased while the molecular weight of the PAHs increased which indicates a hindered diffusion through the matrix as a result of a larger molecule size. Higher diffusion coefficients were derived for LPDE than for HDPE indicating a greater sorption velocity for LPDE according to the lower polymer density.Conclusions
Our results revealed that equilibrium time could be shortened during passive sampling as polymer membranes of lower density are used. In some areas, marine ecosystems may not be in equilibrium with respect to concentrations of organic contaminants and abundance of marine plastic debris. In such cases, different polymer densities should be taken into account in risk assessments.15.
Introduction
The International Association for Danube Research (IAD), a legal association (Verein) according to Austrian law, presently consists of 13 member countries and 12 expert groups covering all water-relevant scientific disciplines. IAD, founded in 1956, represents a traditional and significant stakeholder in the Danube River Basin, fulfilling an important task towards an integrative water and river basin management requested by the EU Water Framework Directive.Discussion
IAD, stretching between basic and applied research, adapted its strategy after the major political changes in 1989. IAD fosters transdisciplinary and transboundary projects to support integrative Danube River protection in line with the governmental International Commission for the Protection of the Danube River (ICPDR) in which IAD has had observer status since 1998. Recent scientific outputs of IAD encompass, amongst others, a water quality map of the Danube and major tributaries, the Sturgeon Action Plan, hydromorphological mapping of the Drava, a macrophyte inventory, and a Mures River study. Further information about IAD can be found on our website http://www.iad.gs.16.
Idris SM Jones PL Salzman SA Croatto G Allinson G 《Environmental science and pollution research international》2012,19(4):1159-1170
Introduction
Two emergent macrophytes, Arundo donax and Phragmites australis, were established in experimental subsurface flow, gravel-based constructed wetlands (CWs) receiving untreated recirculating aquaculture system wastewater.Materials and methods
The hydraulic loading rate was 3.75 cm day?1. Many of the monitored water quality parameters (biological oxygen demand [BOD], total suspended solids [TSS], total phosphorus [TP], total nitrogen [TN], total ammoniacal nitrogen [TAN], nitrate nitrogen [NO3], and Escherichia coli) were removed efficiently by the CWs, to the extent that the CW effluent was suitable for use on human food crops grown for raw produce consumption under Victorian state regulations and also suitable for reuse within aquaculture systems.Results and discussion
The BOD, TSS, TP, TN, TAN, and E. coli removal in the A. donax and P. australis beds was 94%, 67%, 96%, 97%, 99.6%, and effectively 100% and 95%, 87%, 95%, 98%, 99.7%, and effectively 100%, respectively, with no significant difference (p?>?0.007) in performance between the A. donax and P. australis CWs. In this study, as expected, the aboveground yield of A. donax top growth (stems + leaves) (15.0?±?3.4 kg wet weight) was considerably more than the P. australis beds (7.4?±?2.8 kg wet weight). The standing crop produced in this short (14-week) trial equates to an estimated 125 and 77 t ?ha?1 year?1 biomass (dry weight) for A. donax and P. australis, respectively (assuming that plant growth is similar across a 250-day (September–April) growing season and a single-cut, annual harvest).Conclusion
The similarity of the performance of the A. donax- and P. australis-planted beds indicates that either may be used in horizontal subsurface flow wetlands treating aquaculture wastewater, although the planting of A. donax provides additional opportunities for secondary income streams through utilization of the energy-rich biomass produced.17.
C. R. Chen I. R. Phillips L. L. Wei Z. H. Xu 《Environmental science and pollution research international》2010,17(5):1098-1109
Background, aim and scope
Australia is the largest producer of bauxite in the world, with an annual output of approximately 62 million metric dry tons in 2007. For every tonne of alumina, about 2 tonnes of highly alkaline and highly saline bauxite-processing residue are produced. In Western Australia, Alcoa World Alumina, Australia (Alcoa) produces approximately 15 MT of residue annually from its refineries (Kwinana, Pinjarra and Wagerup). The bauxite-processing residue sand (BRS) fraction represents the primary material for rehabilitating Alcoa’s residue disposal areas (RDAs). However, the inherently hostile characteristics (high alkalinity, high salinity and poor nutrient availability) of BRS pose severe limitations for establishing sustainable plant cover systems. Alcoa currently applies 2.7 t ha?1 of di-ammonium phosphate ((NH4)2HPO4; DAP)-based fertiliser as a part of rehabilitation of the outer residue sand embankments of its RDAs. Limited information on the behaviour of the dominant components of this inorganic fertiliser in highly alkaline BRS is currently available, despite the known effects of pH on ammonium (NH4) and phosphorus (P) behaviour. The aim of this study was to quantify the effects of pH on NH3 volatilisation and residual nitrogen (N) in BRS following DAP applications.Methods
The sponge-trapping and KCl-extraction method was used for determining NH3 volatilisation from surface-applied DAP in samples of BRS collected from each of Alcoa’s three Western Australia Refineries (Kwinana, Pinjarra, Wagerup) under various pH conditions (pH 4, 7, 9 and 11). Following cessation of volatilisation, the residual N was extracted from BRS using 2 M KCl and concentrations of NH 4 + –N and NO 3 ? –N were determined by flow injection analysis.Results
The quantities of NH3 volatilised increased dramatically as the pH increased from 4 to 11. Much of the N lost as NH3 (up to 95.2%) occurred within a short period (24 h to 7 days), particularly for the pH 9 and 11 treatments. Concentrations of residual NH 4 + –N recovered in DAP-treated BRS at the end of the experiment decreased with increasing pH. This finding was consistent with increasing loss of N via volatilisation as pH increased. The concentration of NO 3 ? –N was very low due to no nitrification in BRS.Discussion
The pH was a key driver for NH3 volatilisation from DAP-treated BRS and primarily controlled N dynamics in BRS. Results indicate that NH4 not adsorbed by BRS was highly susceptible to volatilisation. The likely lack of nitrifying bacteria did not allow conversion of ammonium to nitrate, thereby further exacerbating the potential for loss via volatilisationConclusions
It was demonstrated that the pH is the key factor controlling the loss of inorganic N from BRS. Although volatilisation was considerably lower at pH 4, achieving this pH reduction in the field is not possible at present. Findings from this study highlight the need to better understand which forms of N fertiliser are most suitable for use in highly alkaline BRS.Recommendation and perspectives
Although pH reduction is the most likely means of stopping NH3 volatilisation in BRS, it is economically and operationally unfeasible to add sufficient acidity for adequately lowering pH in the BRS for revegetation. More attention on forms of fertilisers more suitable to highly alkaline, microbially inert soil conditions appears to be warranted.18.
&#;er&#;ansk&#; Slavom&#;r Ur&#;k Martin &#;evc Jaroslav Khun Miloslav 《Environmental science and pollution research international》2007,14(1):31-35
Goal, Scope and Background
The aim of this work is to show the ability of several fungal species, isolated from arsenic polluted soils, to biosorb and volatilize arsenic from a liquid medium under laboratory conditions. Mechanisms of biosorption and biovolatilization play an important role in the biogeochemical cycle of arsenic in the environment. The quantification of production of volatile arsenicals is discussed in this article.Methods
Heat-resistant filamentous fungi Neosartorya fischeri, Talaromyces wortmannii, T. flavus, Eupenicillium cinnamopurpureum, originally isolated from sediments highly contaminated with arsenic (more than 1403 mg.l-1 of arsenic), and the non-heat-resistant fungus Aspergillus niger were cultivated in 40 mL liquid Sabouraud medium (SAB) enriched by 0.05, 0.25, 1.0 or 2.5 mg of inorganic arsenic (H3AsO4). After 30-day and 90-day cultivation under laboratory conditions, the total arsenic content was determined in mycelium and SAB medium using the HG AAS analytical method. Production of volatile arsenic derivates by the Neosartorya fischeri strain was also determined directly by hourly sorption using the sorbent Anasorb CSC (USA).Results
Filamentous fungi volatilized 0.025–0.321 mg of arsenic from the cultivation system, on average, depending on arsenic concentrations and fungal species. The loss of arsenic was calculated indirectly by determining the sum of arsenic content in the mycelium and culture medium. The amount of arsenic captured on sorption material was 35.7 ng of arsenic (22nd day of cultivation) and 56.4 ng of arsenic (29th day of cultivation) after one hour's sorption. Biosorption of arsenic by two types of fungal biomass was also discussed, and the biosorption capacity for arsenic of pelletized and compact biomass of Neosartorya fischeri was on average 0.388 mg and 0.783 mg of arsenic, respectively.Discussion
The biosorption and amount of volatilized arsenic for each fungal species was evaluated and the effect of initial pH on the biovolatilization of arsenic was discussed.Conclusions
The most effective biovolatilization of arsenic was observed in the heat-resistant Neosartorya fischeri strain, while biotransformation of arsenic into volatile derivates was approximately two times lower for the non-heat-resistant Aspergillus niger strain. Biovolatilization of arsenic by Talaromyces wortmannii, T. flavus, Eupenicillium cinnamopurpureum was negligible. Results from biosorption experiments indicate that nearly all of an uptaken arsenic by Neosartorya fischeri was transformed into volatile derivates.Recommendations and Perspective
. Biovolatilization and biosorption have a great potential for bioremediation of contaminated localities. However, results showed that not all fungal species are effective in the removal of arsenic. Thus, more work in this research area is needed.19.
Marc Soutter Maria Alexandrescu Colin Schenk Radu Drobot 《Environmental science and pollution research international》2009,16(1):33-41
Background, aim, and scope
The need for global and integrated approaches to water resources management, both from the quantitative and the qualitative point of view, has long been recognized. Water quality management is a major issue for sustainable development and a mandatory task with respect to the implementation of the European Water Framework Directive as well as the Swiss legislation. However, data modelling to develop relational databases and subsequent geographic information system (GIS)-based water management instruments are a rather recent and not that widespread trend. The publication of overall guidelines for data modelling along with the EU Water Framework Directive is an important milestone in this area. Improving overall water quality requires better and more easily accessible data, but also the possibility to link data to simulation models. Models are to be used to derive indicators that will in turn support decision-making processes. For this whole chain to become effective at a river basin scale, all its components have to become part of the current daily practice of the local water administration. Any system, tool, or instrument that is not designed to meet, first of all, the fundamental needs of its primary end-users has almost no chance to be successful in the longer term.Materials and methods
Although based on a pre-existing water resources management system developed in Switzerland, the methodological approach applied to develop a GIS-based water quality management system adapted to the Romanian context followed a set of well-defined steps: the first and very important step is the assessment of needs (on the basis of a careful analysis of the various activities and missions of the water administration and other relevant stakeholders in water management related issues). On that basis, a conceptual data model (CDM) can be developed, to be later on turned into a physical database. Finally, the specifically requested additional functionalities (i.e. functionalities not provided by classical commercial GIS software), also identified during the assessment of needs, are developed. This methodology was applied, on an experimental basin, in the Ialomita River basin.Results
The results obtained from this action-research project consist of a set of tangible elements, among which (1) a conceptual data model adapted to the Romanian specificities regarding water resources management (needs, data availability, etc.), (2) a related spatial relational database (objects and attributes in tables, links, etc.), that can be used to store the data collected, among others, by the water administration, and later on exploited with geographical information systems, (3) a toolbar (in the ESRI environment) offering the requested data processing and visualizing functionalities. Lessons learned from this whole process can be considered as additional, although less tangible, results.Discussion
The applied methodology is fairly classical and did not come up with revolutionary results. Actually, the interesting aspects of this work are, on the one hand, and obviously, the fact that it produced tools matching the needs of the local (if not national) water administration (i.e. with a good chance of being effectively used in the day-to-day practice), and, on the other hand, the adaptations and adjustments that were needed both at the staff level and in technical terms.Conclusions
This research showed that a GIS-based water management system needs to be backed by some basic data management tools that form the necessary support upon which a GIS can be deployed. The main lesson gained is that technology transfer has to pay much attention to the differences in existing situations and backgrounds in general, and therefore must be able to show much flexibility. The fact that the original objectives could be adapted to meet the real needs of the local end-users is considered as a major aspect in achieving a successful adaptation and development of water resources management tools. Time needed to setup things in real life was probably the most underestimated aspect in this technology transfer process.Recommendations and perspectives
The whole material produced (conceptual data model, database and GIS tools) was disseminated among all river basin authorities in Romania on the behalf of the national water administration (ANAR). The fact that further developments, for example, to address water quantity issues more precisely, as envisaged by ANAR, can be seen as an indication that this project succeeded in providing an appropriate input to improve water quality in Romania on the long term.20.