Comparison of the droplet size spectra produced by rotary atomizers and hydraulic nozzles under simulated aerial application conditions

Abstract

A wind tunnel was used to characterize the droplet size spectra of liquid sprays from several different atomizers and nozzles used under simulated aerial application conditions. The atomizers included a D8–46 nozzle, a Through Valve Boom (TVB) nozzle, and rotary cage and drum atomizers.

The D8–46 hydraulic nozzle was evaluated, using water, at orientations of 0, 10, 20, 30, 40, 50, 60, 70, 80 and 90° relative to 145 and 180 km/h airstreams. The TVB nozzle was evaluated using water, water with isopropyl alcohol, and water with a non‐ionic surfactant at airstream velocities between 130 and 180 km/h. The rotary atomizers were evaluated at different rotation rates, flow rates of water and an insecticide, in 130 and 180 km/h airstreams.

The volumetric droplet size spectra parameters (D_vo.x) decreased as the angle of the D8–46 nozzle and the airstream velocity increased. Empirical models were developed to predict these values for different windspeed and nozzle angle conditions. The TVB nozzle produced larger droplets than the other atomizers under similar conditions, with a decrease in the D_vo.x parameter values as the airstream velocity increased.

The D_vo.x parameter values produced by the rotary atomizers increased as the liquid flow rate increased, and as the rotation rate and airstream velocity decreased, and were lower for the insecticide than for water. The slotted rotary drum atomizer gave the best control over droplet size, generally producing mono‐modal droplet size spectra where the other atomizers often produced bi‐ and multimodal spectra.     

Polymer and invert emulsifying oil effects upon droplet size spectra of sprays

Abstract

A series of wind tunnel atomization studies were carried out to investigate the effects of polymer and invert suspension oil “drift control adjuvants” upon the droplet size distribution spectra produced by nozzles typically used in aerial and ground based spraying of pesticides. A D8–46 disc and core was used as a typical aerial application nozzle, and an 8003 fan nozzle was used for the ground based sprayers simulation. The droplet size spectra were evaluated in a wind tunnel using a Malvern 2600 laser particle size analyzer immediately upon mixing and at 15 minutes after re‐circulation through a pumping system. The addition of the polymer‐based adjuvants significantly increased the droplet size spectra parameters of the spray cloud, but all the polymer products showed signs of breakdown of their molecular arrangements in the liquid medium, as a result of agitation. The invert suspension oil adjuvant did not change the droplet size spectra markedly, nor did it show signs of breakdown of the internal liquid structure after re‐circulation.     

Effect of in vitro administered 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) on DNA-binding activities of nuclear transcription factors in NIH-3T3 mouse fibroblasts

Abstract

Most modern pesticides are expensive. Application of excessive dosage rates is likely to cause undesirable biological side‐effects and is economically wasteful. Non‐uniform distribution of the spray cloud, or application at the wrong time, may result in failure to control the pest. It is the responsibility of the field operator to acquire sufficient knowledge and skill to ensure proper use of the control agents, to increase efficiency of their usage and to reduce unwanted side‐effects. To achieve this goal, he must take into consideration the various physical factors that govern field performance of pesticides.

A simple relationship exists between the spray volume and emission rate used, and droplet size produced. The use of extremely low spray volumes (i.e., those less than 2.0 litre per ha) for forest insect control in Canada, as opposed to higher volumes used in agriculture, necessitates the release of fine droplets (ranging from 20 to 70 μm in diameter) to obtain adequate coverage of the target area. These droplets take a long time to sediment downwards, evaporate in‐flight, become smaller in size and/or form powdery residues, thus contributing to off‐target drift and impaired droplet adhesion to target surfaces. Physical factors such as rain washing, degradation by sunlight and erosion by wind also influence the longevity of pesticide deposits on foliage which is crucial during the critical period of pest control.

Factors affecting the mode of entry into insects are related to the type of ingredients used in formulation. If a pesticide acts via crawling contact, formulations which would provide surface deposits would be more beneficial than emulsions or oil‐based mixes which tend to undergo penetration into foliar cuticle. Physical factors that affect field performance of a pesticide tank mix are related to phase separation and ‘breakdown of emulsions’ in the application equipment; ‘agglomeration and caking’ of wettable powder dispersions at the bottom of the tank; impaired flow behaviour of highly viscous formulations; and coarse atomization of high‐viscosity tank mixes leading to poor target cover.     

Effects of droplet density and concentration on the efficacy of bacillus thuringiensis and carbaryl against gypsy moth larvae (Lymantria dispar L.)

Abstract

The feeding behavior of gypsy moth larvae exposed to two pesticide deposits (Bt and carbaryl) on oak leaf disks was monitored to determine the relationships between its efficacy and application parameters (droplet density and pesticide concentration). A range of pesticide concentrations and droplet densities (from 9 to 149 droplets/cm²) was used to simulate high and low application rates produced by different methods of application in the field.

The LD₅₀ and the LC₅₀, appeared to be affected by the spatial distribution of the deposit on the leaf surface. Both Bt and carbaryl showed a decreasing LD₅₀ at increasing time after spray. The LD₅₀ of Bt decreased from 14.1 BIU/liter to 3.1 BIU/Iiter between 48 and 144 hours after spray. The results show that feeding inhibition by Bt is more closely related to concentration than to droplet density and dose per unit area with the highest feeding inhibition occurring at 10 BIU/liter at 9 droplets/cm². With carbaryl, an increase in both concentration and droplet density was necessary to cause a decrease in leaf area eaten by larvae.     

The effects of drop size and formulation upon the spread of pesticide droplets impacting on water‐sensitive papers

Abstract

The effects of drop size and formulation upon the spread of pesticide droplets impacting on water‐sensitive papers (WSPs) was investigated. Droplets of diameter 70–350 μm, of four permethrin formulations, were produced using a monosize droplet generator. The droplets were collected on WSPs and in Dow Corning fluid and their diameters measured using a binocular microscope. Spread factors, upon the WSPs, for each dropsize/formulation combination were then calculated. Spread factors varied with both formulation and droplet size and for droplets of 200 and 300 μm diameter spread was significantly correlated with the dynamic surface tension of the formulation. The results suggest that proper calibration of WSPs is necessary for effective droplet sizing.     

Rain‐washing of mimic®, RH‐5992, from balsam fir foliage following application of two formulations

Abstract

Two formulation concentrates of the insecticide, RH‐5992 [N'‐t‐butyl‐N'‐(3,5‐dimethylbenzoyl)‐N‐(4‐ethylbenzoyI) hydrazine], an aqueous flowable (2F) and an emulsion‐suspension (ES), were diluted with water to provide spray mixes containing dosage rates ranging from 35 to 150 g of the active ingredient (AI)/ha. The mixes were sprayed in a laboratory chamber, onto balsam fir branch tips collected from field trees and greenhouse‐grown seedlings. Droplet spectra and spray mass recovery were determined on artificial samplers. Simulated rainfall of two different intensities was applied at different rain‐free periods, and rain droplet sizes were determined. Foliar washoff of RH‐5992 was assessed after application of different amounts of rain, and the increase in soil residues was evaluated.

A direct relationship was indicated between the amount of rainfall and RH‐5992 washoff. The larger the rain droplet size, the greater the amount washed off. Longer rain‐free periods made the deposits more resistant to rain. Regardless of the amount of rainfall, rain droplet size and rain‐free period, foliar deposits of the 2F formulation were washed off to a greater extent than the ES formulation. The increase in soil residues due to foliar washoff was greater for the 2F than for the ES formulation. The deposits of the emulsion‐suspension were consistently more resistant to rain‐washing than those of the aqueous flowable formulation.     

Optimization of a wet scrubber with electrolyzed water spray—Part I: Ammonia removal

Electrolyzed water (EW) is an effective disinfectant with a wide range of pH. EW in acid range was proved to be an ammonia absorbent which make it valuable for wet scrubbers used in animal feeding operations (AFOs). This study aimed to optimize the design and operating parameters of a wet scrubber with EW spray for ammonia removal, based on the size distribution of droplets, the property of EW and the reduction efficiency of ammonia. The optimized parameters included droplet size, nozzle flow rates, pH and available chlorine concentration (ACC) of EW, nozzle number at single stage, stage number, initial ammonia concentration and air speed in the duct. The ammonia removal efficiency increased with the decrease of droplet size and the increase of flow rate. The pH values of EW showed significant influence on ammonia removal efficiency (P ? 0.05), while ACC of the EW showed no significant influence (P > 0.05). For inlet ammonia concentration of 70 ppm with one and three spray stages, the wet scrubber with EW (pH = 1.35) spray was able to reduce 55.8 ± 4.3 % and 97.2 ± 3.0 % of ammonia, respectively, when the nozzles with 0.9 mm orifice diameter operated at a flow rate of 1.20 L min^-1. Response surface analysis showed that orifice diameter, nozzle flow rate, and their combination were all significant factors impacting ammonia removal efficiency for both pH =1.35 and 5.50 at a 95% confidence level. Optimal ammonia removal efficiency was obtained at orifice diameter 0.9 mm and flow rate 1.20 L min^-1 within the selected range. The results of this study demonstrated that wet scrubber with EW spray could be a very effective and feasible ammonia mitigation technology for animal feeding operation.

Implications: It is difficult to effectively reduce ammonia emitted from the animal feeding operations (AFOs). Both the acidity and disinfection effects of electrolyzed water (EW) make it a potential absorbent used for spray in wet scrubber to reduce the ammonia and microorganisms. Based on some preliminary field test results, lab tests were conducted to optimize the design and operation parameters of a wet scrubber with EW spray to improve the ammonia removal efficiency. A better understanding of the application and influence factors of the wet scrubber with EW spray can contribute to effective mitigation of ammonia emission from animal houses and improve the atmosphere air quality.     

Dose transfer of Bacillus thuringiensis from cabbage to the diamondback moth: A graphical simulator

Abstract

The application of agrichemicals is a highly inefficient process and one of the main causes of the environmental and health risks currently associated with pesticide usage. Efforts to mitigate this inefficiency have largely been unsuccessful, due principally to the poor understanding of the processes involved in the spray application of pesticides, from atomization to biological effect. A generalized model of the application system for pesticides from atomization to biological result is described in this overview. The model allows the investigation of the biological consequences of altering the application parameters for the bacterial insecticide Bacillus thuringiensis when used against the diamondback moth (Plutella xylostella L.) with cabbage as the substrate. Parameters input into the model include the in‐flight droplet size frequency distribution of the spray cloud, spatial distribution of the deposit, spread and subsequent environmental degradation of the deposit, and behavioral and toxicological effects.

It is hoped that such a modelling approach can afford insights into the application process, and, through a better understanding of the inefficient but still highly effective hydraulic application systems used worldwide, reduce that inefficiency to tolerable levels.     

Priorities for forestry insecticide application technology research

Abstract

A survey was conducted to determine research priorities for forest insecticide application technology research. The target audience was persons with an interest in the topic (users, applicators, researchers, regulators). One quarter of the forestry users of insecticides felt that ground application technology research should have higher priority whereas three quarters felt that aerial application technology research should have higher priority. Five problems which ranked high for most respondent groups, were: 1) Increase the residual efficacy of Bt and viruses; 2) Determine how to develop public support for aerial application of insecticides in forestry; 3) Determine appropriate, scientifically‐based buffer zone widths required to prevent significant environmental impact in sensitive areas; 4) Develop techniques for rapid and accurate determination of Bt and virus tank mix potency; 5) Develop a practical deposit assessment technique for operational Bt and virus applications.     

Transient analysis of volatile organic compound concentrations for estimating emission rates

While emission rates of volatile organic compounds (VOCs) have been obtained for building materials, furnishings and processes in chambers, field measurements are more difficult. Procedures to estimate emission rates using transient analysis of VOC concentrations are described and applied in a two-story classroom/office building. The analysis employs semi-real-time VOC concentrations determined with a portable GC/FID and simultaneous air change rate measurements using tracer gas decay. The results of the analysis yield consistent values of emission rates for building materials ranging from 0.20 to 0.40 mg m⁻² h⁻¹ when normalized by floor area. Occupancy-related emissions were more difficult to estimate and covered a wider range from roughly 0.1 to 1.5 mg m⁻² h⁻¹. The test data were also analyzed in an attempt to determine sink parameters, but these efforts were not particularly successful. Furthermore, in these tests, the inclusion of sink effects did not significantly impact the estimated emission rates. While this paper offers a transient analysis approach that may lead to improved field estimates of VOC emission rates, it is not presented as a definitive methodology. Nevertheless, transient analysis has potential for use in other buildings, but simultaneous air change rate measurements are critical in its application in estimating VOC emission rates in the field.     

Sorption of chlorpyrifos and fonofos on four soils and turfgrass thatch using membrane filters

Abstract

Chemical transport in soil is a major factor influencing soil and water contamination. Four soils and turfgrass thatch, representing a wide range of organic carbon OC content were studied to determine sorption K_d and K_f parameters for the insecticides chlorpyrifos and fonofos. The batch equilibrium method was used. The concentration of insecticide was measured in the solution as well as in the solid phase to determine the most accurate sorption data. Four soils and thatch were equilibrated for 24 h at 22 ± 1^OC with aqueous insecticide solutions. Four concentrations of the insecticides, each <50% of their respective water solubilities, were selected for the experiments. After extraction with an organic solvent, the concentration of insecticides in the aqueous solution was determined by gas liquid chromatography using electron capture detection for chlorpyrifos, and nitrogen/phosphorus detection for fonofos. Data obtained were fitted to the log and simple linear form of the Freundlich equation. Mass balance Freundlich isotherm exponents n ranged between 0.82 and 0.93 for chlorpyrifos. 0.82 and 1.21 for fonofos, with r² ≥ 0.97. K_oc (percent of organic carbon %OC normalized Sorption coefficient) values were calculated by using experimentally developed K_d and K_f coefficients in relation to OC levels from 0.29 to 34.85%. K_d and K_f coefficients of both insecticides were positively correlated with OC (r² ≥ 0.96). organic matter OM (r² ≥ 0.96), and cation exchange capacity CEC (r² ≥ 0.90).     

The persistence and disappearance by washoff and dryfall of methoxychlor from soybean foliage—a preliminary study

Abstract

The persistence and disappearance (washoff or dryfall) of methoxychlor [2,2‐bis(p‐methoxypheny1)‐1,1,1‐trichloroethane] from mature soybean [Glycine max (L.) Merrill] foliage was investigated in a small field plot study under natural rainfall conditions in 1977 and 1978. Residue analyses were conducted using whole plant samples‐ Methoxychlor washoff rate was 8±4% of the amount on plants (prior to rain) per centimeter of rainfall, regardless of time after application. Total seasonal washoff for 1978 accounted for 33.5% of the applied pesticide; however, 30.5% of the total loss was removed by washoff on the second day after application. Dryfall or dislodgeable residue accounted for less than 1% of the amount applied. The amount of dryfall was significantly greater in plots entered by workers than in those where entry was avoided. More than 19% of the applied methoxychlor was lost as a result of through‐fall to the ground during application to the plots. Statistical analyses indicated that within‐sample variation for mechanical chopping of plant samples was significantly smaller at the 5% level than for a hand chopping method. Results from this study will be useful in defining research objectives for the development of algorithms to describe the behavior of foliar‐applied compounds. Such algorithms are necessary for estimating runoff losses of insecticides to water bodies.     

Endosulfan and Quinalphos Residues and Toxicity to Soil Microarthropods after Repeated Applications in a Field Investigation

Endosulfan (1,4,5,6,7,7-hexachloro-8,9,10-trinorborn-5-en-2,3-ylenedimethylsulphite) and quinalphos (O,O-diethyl O-quinoxalin-2-yl phosphorothioate) persistence and their effect on soil microarthropods were studied after repeated applications in cotton fields. Dissipation behavior of insecticides after repeated applications was observed from 78 to 292 days after the first insecticide treatment. At any given time the concentrations of endosulfan β residues were always higher as compared to endosulfan α. From 78 to 85 days, 5.0% and 20.4% decrease in α and β endosulfan residues was observed, respectively. Endosulfan β isomer decreased up to 93.0% in 292 days. Endosulfan sulfate was detected as a major metabolite in the soil samples. Total endosulfan residues decreased by 86.6% from 78 to 292 days. The amounts of quinalphos residues were less as compared to endosulfan at any given time. The residues observed after 78 days of application were 0.88 ng g^?1 d wt. soil. At the end of 145 days, a 35.0% decrease in quinalphos residue was observed, which decreased further by 50.9% in 292 days. Among the soil microarthropods studied, Acarina was more sensitive to the applied insecticides as compared to Collembola. Three days after the last treatment, up to 94.5% (p < 0.01) and 71.2% (p < 0.05) decrease in Acarina population was observed in endosulfan and quinalphos treated fields, respectively, compared to control field. In general, no noticeable change in Collembola population was observed after the insecticide treatments.     

On the forming mechanism of the cleaning airflow of pulse-jet fabric filters

To reveal the formation mechanism of a pulse-jet airflow’s cleaning effect in a filter bag, a theoretical model is built by using the theory of the gas jet and unitary adiabatic flow according to given specifications and dimensions of the bags and resistance characteristics of the cloth and dust layer. It is about the relationship between cleaning system structure and operating parameters. The model follows the principle that the flow and kinetic energy of jet flow injected into a filter bag should be consistent with the flow of cleaning airflow in the bag and the pressure drop flowing through the filter cloth and dust layer. The purpose of the model is to achieve the peak pressure of cleaning airflow, which dominates the effect of the pulse-jet cleaning process. The cleaning system structure includes air pressure in the nozzle, structure and size of nozzle, exit velocity of nozzle, jet distance, and diameter of jet cross section. Based on the condition of the cleaning system structure and operating parameters established by using the theoretical model, Fluent software is applied to carry out a numerical simulation of the jet airflow field at the nozzle’s outlet, jet airflow field between nozzle and bag top, and cleaning airflow field in the filter bag. Experimental results are used to verify the reliability of the theoretical model. They are obtained in a pilot-scale test filter with a single bag, with length 2 m and in general full-scale dimensions of the cleaning system. The results show that when any rectification measure is not installed at the bag opening, the cross-sectional area covered by the jet gas is hardly sufficient to cover the entire area of the bag opening. A large portion of the gases injected into the filter bag will overflow reversely upward from the edge due to pressure differences between the upper area and lower area inside the bag opening. This led to a serious shortage of the cleaning airflow and ar limited increase in static pressure. When a venturi-type rectifier tube is installed at the bag opening, the jet flow is converted to funnel flow for which the cross-section velocity distribution is more uniform at the throat of the rectifier tube due to the guided effects of the upper tapered pipe. Then it is transited to stressful flow below the bag opening via rectified effects of the lower dilated pipe. The results show that the gap between the static pressure of gas in the bag and the expected value is significantly reduced. The theoretical value of the nozzle diameter is enlarged to compensate for two aspects of adverse effects of cleaning airflow and energy. This is because the flow is not a purely free-form jet from the nozzle to the entrance of the rectifier tube and because the gas suffers from local resistance while flowing through the rectifier tube. The numerical simulation and experiment show that the peak pressure of cleaning airflow in the filter bag is able to reach the expected value. The results confirm that the mechanism of the pulse-jet cleaning airflow and the calculation method of the pulse-jet cleaning system structure and operating parameters offered in this study are correct. The study results provide a scientific basis for designing the system of pulse-jet fabric filters.

Implications: Pulse-jet cleaned fabric filters are commonly used for air pollution control in many industries. Pulse-jet cleaning is widely used for this purpose as it enables frequent cleaning while the filter is operating. However, the theoretical system of the forming mechanism of the pulse-jet cleaning has not formed so far. This indicates the theoretical model plays an important role in designing effective pulse-jet cleaned fabric filters.     

Bacillus thuringiensis field applications: Effect of nozzle type,drop size,and application timing on efficacy against gypsy moth

Abstract

In a series of recent studies, we evaluated the influence of delivery systems, drop size and application timing on the efficacy of aerially applied Bacillus thuringiensis against gypsy moth infestations. Use of different nozzle systems including Micronair, Flat Fan or Twin Jet, did not appear to result in significant differences in Bt coverage efficiency, foliage protection or population reduction. Nor was there any significant difference in population reduction when Bt was applied at two different drop sizes with volume median diameters of 110 and 163 μm. The efficacy of different formulations on larval populations were similar when used against the younger 1st and 2nd instar but differed when treatment was delayed until the population matured to the 3rd and 4th instar stages.     

Soil Persistence of Triasulfuron Herbicide as Affected by Biotic and Abiotic Factors

Persistence of triasulfuron [3-(6-methoxy-4methyl-1,3,5-triazin-2-yl)-1-{2-(2-chloroethoxy)-phenylsulfonyl}-urea] in soil was studied under wheat crop and laboratory conditions. Field experiment was conducted in the farms of Agronomy Division, Indian Agricultural Research Institute (IARI), New Delhi. Randomized block design (RBD) was followed with four replicates and two rates of treatments along with control and weedy check. Triasulfuron was applied as post-emergent application to wheat crop at two rates of application viz., 15 g and 20 g a.i. ha^?1. Soil samples at 0 (3 h), 1, 3, 5, 7, 10, 15, 20, and 30-day intervals after application were drawn, extracted, cleaned up, and analyzed for herbicide residues by high performance liquid chromatography (HPLC) using C₁₈ column and methanol: water (8:2) as mobile phase at 242 nm wave length. Effect of microbial activity and soil pH was studied under laboratory conditions. Dissipation of triasulfuron followed a first-order-rate kinetics. Residues dissipated from field soil with half-life of 5.8 and 5.9 days at two rates of application. The study indicated biphasic degradation with faster rate initially (t _1/2 = 3.7 days), followed by a slower dissipation rate at the end (t _1/2 = 9.4 days). Similar trend was observed with non-sterile soil in laboratory with a longer half-life. Acidic pH and microbial activity contributed toward the degradation of triasulfuron in soil.     

Survival and behavior of the insecticide-exposed predators Podisus nigrispinus and Supputius cincticeps (Heteroptera: Pentatomidae)

Pentatomid stinkbugs are important predators of defoliating caterpillars in agricultural and forestry systems, and knowledge of the impact of insecticides on natural enemies is important information for integrated pest management (IPM) programs. Thus, we assessed the toxicity and behavioral sublethal response of the predators Podisus nigrispinus and Supputius cincticeps exposed to deltamethrin, methamidophos, spinosad and chlorantraniliprole, insecticides commonly used to control the velvetbean caterpillar (Anticarsia gemmatalis) in soybean crops. With the exception of deltamethrin for S. cincticeps, all insecticides showed higher acute toxicity to the prey than to these natural enemies providing effective control of A. gemmatalis. The recommended field concentration of deltamethrin, methamidophos and spinosad for controlling A. gemmatalis caused 100% mortality of P. nigrispinus and S. cincticeps nymphs. Chlorantraniliprole was the less toxic and the most selective insecticide to these predators resulting in mortalities of less than 10% when exposed to 10× the recommended field concentration for a period of 72 h. Behavioral pattern changes in predators were found for all insecticides, especially methamidophos and spinosad, which exhibited irritability (i.e., avoidance after contact) to both predator species. However, insecticide repellence (i.e., avoidance without contact) was not observed in any of the insects tested. The lethal and sublethal effects of pesticides on natural enemies is of great importance for IPM, and our results indicate that substitution of pyrethroid and organophosphate insecticides at their field rates by chlorantraniliprole may be a key factor for the success of IPM programs of A. gemmatalis in soybeans.     

The effect of certain intrinsic and extrinsic variables on the acute toxicity of selected organophosphorus insecticides to the mummichog,Fundulus heteroclitus

Abstract

The acute toxicity of two organophosphorus (OP) insecticides, azinphosmethyl and acephate, was evaluated in the mummichog, Fundulus heteroclitus. In addition, the effects of certain intrinsic (sex) and extrinsic (salinity and multiple toxicant interraction) variables on the toxic response were also investigated. Azinphosmethyl was by far the most toxic of the two OP insecticides with a 96h LC50 ～ 100,000 x lower than that for acephate. Slight sex differences were observed in the sensitivity of mummichogs to each of the OP insecticides with male fish being marginally more sensitive. Significant effects of low salinity stress were observed only with acephate exposure and, in this case, low salinity appeared to be slightly protective. In general, all of the insecticide mixtures (azinphosmethyl/endosulfan, azinphosmethyl/fenvalerate and acephate/fenvalerate) tested exhibited simple additive toxicity.     

Effect of Dursban 480 EC (chlorpyrifos) and Talstar 10 EC (bifenthrin) on the physiological and genetic diversity of microorganisms in soil

This investigation was undertaken to determine the impact of the insecticides Dursban 480 EC (with organophosphate compound chlorpyrifos as the active ingredient) and Talstar 10 EC (with pyrethroid bifenthrin as the active ingredient) on the respiration activity and microbial diversity in a sandy loam luvisol soil. The insecticides were applied in two doses: the maximum recommended dose for field application (15 mg kg^?1 for Dursban 480 EC and 6 mg kg^?1 for Talstar 10 EC) and a 100-fold higher dose for extrapolation of their effect. Bacterial and fungal genetic diversity was analysed in soil samples using PCR DGGE and the functional diversity (catabolic potential) was studied using BIOLOG EcoPlates at 1, 3, 7, 14, 28, 56 and 112 days after insecticide application. Five bacterial groups (α, β, γ proteobacteria, firmibacteria and actinomycetes) and five groups of fungi or fungus-like microorganisms (Ascomycota, Basidiomycota, Chytridiomycota, Oomycota and Zygomycota) were analysed using specific primer sets. This approach provides high resolution of the analysis covering majority of microorganisms in the soil. Only the high-dose Dursban 480 EC significantly changed the community of microorganisms. We observed its negative effect on α- and γ-proteobacteria, as the number of OTUs (operational taxonomic units) decreased until the end of incubation. In the β-proteobacteria group, initial increase of OTUs was followed by strong decrease. Diversity in the firmibacteria, actinomycetes and Zygomycota groups was minimally disturbed by the insecticide application. Dursban 480 EC, however, both positively and negatively affected certain species. Among negatively affected species Sphingomonas, Flavobacterium or Penicillium were detected, but Achromobacter, Luteibacter or Aspergillus were supported by applied insecticide. The analysis of BIOLOG plates using AWCD values indicated a significant increase in metabolic potential of microorganisms in the soil after the high-dose Dursban application. Analysis of respiration demonstrated high microbial activity after insecticide treatments; thus, microbial degradation was relatively fast. The half-life of the active insecticide compounds were estimated within the range of 25 to 27 days for Talstar and 6 to 11 days for Dursban and higher doses stimulated degradation. The recommended dose levels of both insecticides can be considered as safe for microbial community in the soil.     

Cytoprotective and anti-apoptotic action of HSP70 stress protein in Oreochromis niloticus exposed to residual dilutions of insecticides with fipronil and ethiprole

Abstract

The objective of this research was to investigate the potential damage caused by the residual concentrations of the insecticides Regent^® WS 800 and Curbix^® SC 200, containing fipronil and ethiprole, respectively as active ingredients, on the liver of Oreochromis niloticus. The analyses of HSP70 shock protein labelling and cell death process by TUNEL method were performed in order to measure the effects of the exposure of cell repair system of fish to both insecticides. Statistical analyses showed no significant molecular damage to the hepatic tissue of animals. Nevertheless, variations in HSP70 and DNA fragmentation levels, endpoint of cell repair system response and cellular death, respectively, were observed in several groups. These results indicate that the cell repair machinery was efficient when in contact with residual concentrations of insecticides. However, the DNA fragmentation detected by the TUNEL method suggests that even in face of the cytoprotective action of the HSP70 protein, there are damages that become irreparable. To finish, it is worth mentioning that given the results obtained from residual concentrations, use in the field should be with caution.