Copper uptake by Elsholtzia splendens and Silene vulgaris and assessment of copper phytoavailability in contaminated soils

Tolerance and metal uptake are two essential characteristics required for phytoextraction of metals from contaminated soils. We compared tolerance and Cu uptake of Elsholtzia splendens (reported previously to be a Cu hyperaccumulator) with Silene vulgaris (the Imsbach population, a well-known Cu-tolerant excluder species), using 30 soils varying widely in total Cu concentration (19-8645 mg kg(-1)). We further investigated the effectiveness of different soil testing methods for predicting plant metal uptake. The results showed that both Elsholtzia splendens and Silene vulgaris were tolerant to Cu, especially Silene vulgaris. However, Elsholtzia splendens did not hyperaccumulate Cu, but behaved as a typical Cu excluder like Silene vulgaris. The concentrations of Cu in both plants correlated more closely with 1 M NH4NO3 extractable Cu, soil solution Cu, or effective Cu concentration determined using DGT, than with soil total Cu, EDTA extractable Cu or free Cu2+ activity. The relationships between soil solution properties and root Cu concentrations were further investigated using multiple regression. The results showed that increasing soil solution pH increased root Cu concentration when free Cu2+ activity was held constant, suggesting a higher phytoavailability of free Cu2+ at a higher pH. Soil solution DOC appeared to play two contrasting roles on the phytoavailability of Cu: (1) reducing Cu availability by complexing Cu; and (2) increasing Cu availability at the same level of free Cu2+ activity by providing a strong buffer for free Cu2+. The results are consistent with the intensity/capacity concept for phytoavailability of metals in soils.     

Comparison of a rhizosphere-based method with other one-step extraction methods for assessing the bioavailability of soil metals to wheat

There is no method recognized as a universal approach for evaluation of bioavailability of heavy metals in soil. Based on the simulation of the rhizosphere soil conditions and integration of the combined effects of root-soil interactions as a whole, a rhizosphere-based method has been proposed. Wet fresh rhizosphere soil was extracted by low-molecular-weight organic acids (LMWOAs) to fractionate metal fractions of soil pools, which were then correlated with the metal contents of wheat roots and shoots. The rhizosphere-based method was compared with other one-step extraction methods using DTPA, EDTA, CaCl2, and NaNO3 as extractants and the first step of the Community Bureau of Reference (BCR) method. Simple correlation and stepwise multiple regression analysis were used for the comparison. Simple correlation indicated that the extractable Cu, Zn, Cr, and Cd of soils by the rhizosphere-based method were significantly correlated with the metal contents of wheat roots. For DTPA, BCR1 and EDTA methods there was a relatively poor correlation between the extractable Cu, Zn and Cd of soil and metal contents of wheat roots. Stepwise multiple regression analysis revealed that the equation of the rhizosphere-based method was the simplest one, and no soil properties variables needed to be added. In contrast, the equations of other one-step extraction methods were more complicated, and soil properties variables needed to be entered. The most distinct feature of the rhizosphere-based method was that the recommended method was suitable for acidic, neutral and near alkaline soils. However, the DTPA and EDTA extraction methods were suitable for calcareous soils only-or-only for acidic soils. The CaCl2, and NaNO3 extraction methods were only suitable for exchangeable metals. In short, the rhizosphere-based method was the most robust approach for evaluation of bioavailability of heavy metals in soils to wheat.     

A model for evaluation of the phytoavailability of trace elements to vegetables under the field conditions

Currently, several single extraction methods are used for the evaluation of the phytoavailability of metals using pot experiments. A systematic comparison, however, is lacking. It is especially true for the field studies. This study was to investigate the phytoavailability of trace elements to vegetables grown on metal-contaminated soils under the field conditions. All soils collected were typical calcareous soils in northern China. Four frequently used methods using CaCl2, diethylenetriaminepentaacetic acid (DTPA), CH3COOH, and water as extractants were compared for phyto-availability. The concentrations of metals extracted by these four extraction methods ranged from 3.42 to 815, 1.51- 6965, 0.732-24473, 0.688-7863, 0.246-685, 1.99-5337 0.203-4649 ng/g for Cr, Ni, Zn, Cu, Cd, Pb and REEs, respectively. Simple correlation analysis indicated that a significant correlation (Cr: r = 0.5411**; Zn: r = 0.6352**; Cd: r = 0.6979**; Pb: r = 0.5537** and REEs: r = 0.5185** -0.6684**) was observed between the CaCl2-extractable metals in soil solution and that in Chinese cabbage. In addition, soil pH, organic matter (OM), and cation exchange capacity (CEC) also affect the phytoavailability. An empirical model was developed to express the combined effect of soil properties on the phytoavailability. The stepwise multiple regression analysis demonstrated that the phytoavailability of trace elements strongly correlated with the extractable fraction by CaCl2, total metal concentration in soils, and soil pH, OM, CEC. This model can describe approximately 75-95% of the variability of metal uptake and the r2 values ranged from 0.741** to 0.954**, which were much better than the single correlation analysis. For celery and cole, a strong correlation was obtained for Cr, Ni, Zn, Cu, Cd, La, Ce, Pr and Nd. For spinach and Chinese cabbage, however, a positive correlation was only observed for 1 and 3 metals, respectively. Generally, the developed empirical model can integrate the combined effects of soil properties, extractable metal fractions in soil solutions and plant species on the phytoavailability of metals to vegetables in the field conditions.     

Microbial indicators of heavy metal contamination in urban and rural soils

Urban soils and especially their microbiology have been a neglected area of study. In this paper, we report on microbial properties of urban soils compared to rural soils of similar lithogenic origin in the vicinity of Aberdeen city. Significant differences in basal respiration rates, microbial biomass and ecophysiological parameters were found in urban soils compared to rural soils. Analysis of community level physiological profiles (CLPP) of micro-organisms showed they consumed C sources faster in urban soils to maintain the same level activity as those in rural soils. Cu, Pb, Zn and Ni were the principal elements that had accumulated in urban soils compared with their rural counterparts with Pb being the most significant metal to distinguish urban soils from rural soils. Sequential extraction showed the final residue after extraction was normally the highest proportion except for Pb, for which the hydroxylamine-hydrochloride extractable Pb was the largest part. Acetic acid extractable fraction of Cd, Cu, Ni, Pb and Zn were higher in urban soils and aqua regia extractable fraction were lower suggesting an elevated availability of heavy metals in urban soils. Correlation analyses between different microbial indicators (basal respiration, biomass-C, and sole C source tests) and heavy metal fractions indicated that basal respiration was negatively correlated with soil Cd, Cu, Ni and Zn inputs while soil microbial biomass was only significantly correlated with Pb. However, both exchangeable and iron- and manganese-bound Ni fractions were mostly responsible for shift of the soil microbial community level physiological profiles (sole C source tests). These data suggest soil microbial indicators can be useful indicators of pollutant heavy metal stress on the health of urban soils.     

The use of a sequential leaching procedure for heavy metal fractionation in green liquor dregs from a causticizing process at a pulp mill

A five-stage sequential leaching procedure was used to fractionate heavy metals (Cd, Cu, Pb, Cr, Zn, Fe, Mn, Ni, Co, As, V, Ba and Ti) in green liquor dregs into the following fractions: (1) water-soluble fraction (H2O), (2) exchangeable fraction (CH3COOH), (3) easily reduced fraction (HONH3Cl), (4) oxidizable fraction (H2O2 + CH3COONH4), and (5) residual fraction (HF + HNO3 + HCl). The green liquor dregs were derived from a causticizing process at a pulp mill at Kemi, Northern Finland. According to the leaching studies, the leachability of heavy metals in the water-soluble fraction varied between 0.5 and 2 mg kg(-1) expressed on a dry weight (d.w.) basis, indicating relatively low bioavailability of the metals. However, the concentration of Mn (2065 mg kg(-1); d.w.) showed a strong and of Zn (17.6 mg kg(-1); d.w.), Ni (39.7 mg kg(-1); d.w.) and Ba (32.0 mg kg(-1); d.w.) slightly tendency to be extracted in the exchangeable fraction. In addition, Zn, Mn, Ni, Co, V and Ba showed clear leachability in the easily reduced fraction, as well as Cd, Cu, Cr, Zn, Mn, As and Ba in the oxidizable fraction. For Cd, Cu, Cr, Zn, Mn, Ni, Co, Ba and Ti, the sum of leachable heavy metal concentrations in fractions 1-5 agreed relatively well with the "total" heavy metal concentrations. Recoveries of the sum of fractions 1-5 were 84-56% of those obtained by the US EPA method 3052 (i.e. concentrations obtained after microwave oven digestion with a mixture of HF and HNO3).     

Optimizing the molarity of a EDTA washing solution for saturated-soil remediation of trace metal contaminated soils

Three experiments were conducted to optimize the use of ethylenediaminetetraacetic acid (EDTA) for reclaiming urban soils contaminated with trace metals. As compared to Na(2)EDTA, (NH(4))(2)EDTA extracted 60% more Zn and equivalent amounts of Cd, Cu and Pb from a sandy loam. When successively saturating and draining loamy sand columns during a washing cycle, which submerged it once with a (NH(4))(2)EDTA wash and four times with deionised water, the post-wash rinses largely contributed to the total cumulative extraction of Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn. Both the washing solution and the deionised water rinses were added in a 2:5 liquid to soil (L:S) weight ratio. For equal amounts of EDTA, concentrating the washing solution and applying it and the ensuing rinses in a smaller 1:5 L:S weight ratio, instead of a 2:5 L:S weight ratio, increased the extraction of targeted Cr, Cu, Ni, Pb and Zn.     

Assessment of the bioavailability of rare earth elements in soils by chemical fractionation and multiple regression analysis

The bioavailability of rare earth elements (REEs) in soils was evaluated, based on the combination of chemical fractionation and multiple regression analysis. REEs in soils were partitioned by a sequential extraction procedure into water soluble (F(ws)), exchangeable (F(ec)), bound to carbonates (F(cb)), bound to organic matter (F(om)), bound to Fe-Mn oxides (F(fm)) and residual (F(rd)) fractions. Alfalfa (Medicago Staiva Linn.) had been grown on the soils in a pot-culture experiment under greenhouse conditions for 35 days. The concentrations of REEs in fractions and plant were determined by inductively coupled plasma-mass spectrometry (ICP-MS). Chemical fractionation showed that (F(ws)) fraction of REEs was less than 0.1% and residual (F(rd)) was the dominant form, more than 60% in soils. Bioaccumulation of REEs was observed in Alfalfa. REE availability to the plant was evaluated by multiple regression analysis. F(ws), F(ec), F(cb) and F(om) fractions were significantly correlated with REE uptake by alfalfa. But the exchangeable Pr(F(ec)) was significantly correlated with Pr concentration in alfalfa. F(ec), F(cb) and F(om) greatly contributed to La and Nd bioavailability; F(ec) and F(om) to Ce, Gd and Dy; F(ec) and F(cb) to Yb; and F(ws), F(ec) and F(om) to total REEs. This meant that the bioavailability of different species of REEs varied with individual REE. The results of this study indicated that the sequential extraction procedure, in conjunction with multiple regression analysis, may be useful for the prediction of plant uptake of REEs from soils.     

Estimates of ambient background concentrations of trace metals in soils for risk assessment

Site-specific or soil type-specific ambient background concentrations (ABCs) of trace metals in soils are needed for risk assessment. We investigated three different methods for estimating ABCs in soils using a dataset of 5691 soil samples from England and Wales. The concentrations of Co, Cr and Ni were strongly associated with Al and Fe, and multiple regressions explained 62-85% of their variation, and Al and Fe can therefore be used to predict ABCs for these metals. Soil texture had a major influence on the concentrations of Cd, Co, Cr, Cu, Ni and Zn, and the medians were 3-5 fold higher in clayey than in sandy soils. This was used to predict texture-specific ABCs. Lead concentration was higher in acidic peaty soils than in other soils. A probability graph method was used to estimate ABC for Pb in a population of relatively uncontaminated soils. Potential applications of ABCs are discussed.     

Isotherms and sequential extraction procedures for evaluating sorption and distribution of heavy metals in soils

Heavy metals are potentially toxic to human life and the environment. Their contaminating effect in soils depends on chemical associations. Hence, determining the chemical form of a metal in soils is important to evaluate its mobility and bioavailability. We utilized a sequential extraction procedure and sorption isotherms (monometal and competitive) to evaluate the mobility and distribution of Cd, Cu, Ni, Pb, and Zn in four soils differing in their physicochemical properties: Calcixerollic Xerochrepts (Cx1 and Cx2), Paralithic Xerorthent (Px) and Lithic Haplumbrept (Lh). Most of the metals retained under point B conditions of sorption isotherms were extracted from the more mobile fractions: exchangeable and carbonates, in contrast with the profiles of the original soils where metals were preferently associated with the residual fraction. In soils having carbonate concentration under 6% (Cx1 and Lh), the exchangeable fraction was predominant, whereas in calcareous soils (Cx2 and Px) metals extracted from carbonates predominated. Partitioning profiles were in accordance with the affinity sequences deduced from the initial slope of isotherms and showed that the soils had a greater number of surface sites and higher affinity for Pb and Cu than for Cd, Ni, or Zn. In general, the simultaneous presence of the cations under study increased the percentages of metals released in the exchangeable fraction. The tendency towards less specific forms was more noticeable in Cx2 and Px soils and for Ni, Zn, and Cd. The affinity of inorganic surfaces was larger for Zn than for Cd or Ni, but the affinity of organic surfaces was larger for Cd or Ni than for Zn.     

Use of sequential extraction to assess metal partitioning in soils

The state of heavy metal pollution and the mobility of Cd, Cu, Ni, Cr, Pb and Zn were studied in three texturally different agricultural soil profiles near a Cu-Ni smelter in Harjavalta, Finland. The pseudo-total concentrations were determined by an aqua regia procedure. Metals were also determined after division into four fractions by sequential extraction with (1) acetic acid (exchangeable and specifically adsorbed metals), (2) a reducing agent (bound to Fe/Mn hydroxides), (3) an oxidizing agent (bound to soil organic matter) and (4) aqua regia (bound to mineral structures). Fallout from the smelter has increased the concentrations of Cd, Cu and Ni in the topsoil, where 75-90% of Cd, 49-72% of Cu and 22-52% of Ni occurred in the first two fractions. Slight Pb and Zn pollution was evident as well. High proportions of mobile Cd, Cu and Ni also deeper in the sandy soil, closest to the smelter, indicated some downward movement of metals. The hydroxide-bound fraction of Pb dominated in almost all soils and horizons, while Ni, Cr and Zn mostly occurred in mineral structures. Aqua regia extraction is usefully supplemented with sequential extraction, particularly in less polluted soils and in soils that exhibit substantial textural differences within the profiles.     

Distribution, availability, and sources of trace metals in different particle size fractions of urban soils in Hong Kong: Implications for assessing the risk to human health

The concentration and loading distribution of trace metals (Cu, Zn, Pb, Co, Ni, Cr, and Mn) and major elements (Al, Ca, Fe, and Mg) in different particle size fractions (2000-280, 280-100, 100-50, 50-10, 10-2, and <2 μm) of surface soils from highly urbanized areas in Hong Kong were studied. The enrichment of Pb, Cu, and Zn in the urban soils was strongly influenced by anthropogenic activities, and Pb accumulated in fine particles was mainly derived from past vehicular emissions as shown by Pb isotopic signatures. Trace metals primarily accumulated in clay, fine silt, and very fine sand fractions, and might pose potential health risks via the inhalation of resuspended soil particles in the air (PM₁₀ or PM_2.5), and ingestion of adhered soils through the hand-to-mouth pathway. The mobility, bioavailability, and human bioaccessibility of Pb and Zn in bulk soils correlated significantly with metal concentrations in fine silt and/or very fine sand fractions.     

Effect of soil on microbial responses to metal contamination

An experiment was conducted to investigate microbial responses to metal inputs in five soils with varying clay and organic contents; one soil had also a higher pH. These soils were treated with a low metal, sewage sludge control or with this sludge contaminated to achieve Cu=112, Ni=58 and Zn=220 mg kg(-1) in medium and Cu=182, Ni=98 and Zn=325 mg kg(-1) in high metal soils. CO(2) evolution rates were measured at 1 week and at 4-5-day intervals thereafter until the end of the incubation (7 weeks). Extractable metals (CaCl(2) and water), biomass C, metabolic quotient, ergosterol, bacterial-fungal phospholipid fatty acid (PLFA-3 weeks only) ratio and mineral N were measured at 3 and 7 weeks. Metal inputs caused a marked increase in metal availability in the slightly acidic sandy loams, a smaller increase in slightly acidic clays and had little effect in the alkaline loam. After an initial increase in CO(2) evolution with metal inputs in all soils, the high metal treatment alone caused a significant decrease at later stages, mainly in sandy loams. Although biomass C and metabolic quotient decreased in all soils with higher metal inputs, the effect was more pronounced in the sandy loams. Metal inputs increased ergosterol and decreased bacterial-fungal PLFA ratios in most soils. Larger mineral N contents were found in all high metal soils at 3 weeks but, after 7 weeks, metals caused a significant decrease in sandy loams. CaCl(2) and water-extractable Cu, Ni and Zn contents were closely correlated with microbial indices in sandy loam but not in clay soils. Overall, the effect of treatments on microbial and extractable metal indices was greater in loams. Within a single series, higher organic soils showed less pronounced responses to metal inputs, although this trend was not always consistent.     

Residual metal concentrations in soils and leaf accumulations in tobacco a decade following farmland application of municipal sludge

The objectives of this investigation were to examine the long-term residual effects of metal loading through sewage sludge applications on the total vs. diethylene triamine pentacetic acid (DTPA) extractable metal concentrations in soil and leaf accumulations in tobacco. Maryland tobacco (Nicotiana tabacum L.), cv. 'MD 609', was grown in 1983 and 1984 at two sites in Maryland that had been amended in 1972 with dewatered, digested sewage sludge from washington, DC, at rates equal to 0, 56, 112 and 224 mg ha(-1). The metal concentrations in the sludge, in mg kg(-1) dry weight, were: 1300 Zn, 570 Cu, 280 Pb, 45 Ni and 13 Cd. Soil samples collected from the surface horizon and composite leaf samples of cured tobacco were analyzed for total Zn, Cu, Mn, Fe, Pb, Ni and Cd concentrations. The soil samples were also examined for soil pH and DTPA extractable metals. Equations were generated using polynomic and stepwise regression analyses which described the relationships between total vs. DTPA extractable soil metals, and between DTPA soil and soil pH vs. plant metal concentrations, respectively. Significant increases were observed for both total and DTPA extractable metal concentrations for all metals, with all but total Mn and Ni being significant for linear and quadratic effects regarding sludge rates. However, linear relationships were found between DTPA extractable vs. total soil concentrations for all elements except Pb and Ni which were quadratic. Significant increases in plant Zn, Cu, Mn, Ni and Cd and decreases in Fe were observed with increased sludge rates. Plant Pb levels were unaffected by sludge applied Pb. Linear relationships were observed between plant Zn and Cd and DTPA soil metal levels: however, Mn and Cu levels were described by quadratic and cubic relationship, respectively. Relationships between plant Fe and Pb and DTPA extractable concentrations were nonsignificant. Additional safeguards to protect crop contamination from heavy metals such as Cd were discussed.     

Growth response and phytoextraction of copper at different levels in soils by Elsholtzia splendens

Phytoremediation is a promising approach for cleaning up soils contaminated with heavy metals. Information is needed to understand growth response and uptake mechanisms of heavy metals by some plant species with exceptional capability in absorbing and superaccumulating metals from soils. Greenhouse study, field trial, and old mined area survey were conducted to evaluate growth response and Cu phytoextraction of Elsholtzia splendens in contaminated soils, which has been recently identified to be tolerant to high Cu concentration and have great potential in remediating contaminated soils. The results from this study indicate that the plant exhibited high tolerance to Cu toxicity in the soils, and normal growth was attained up to 80 mg kg(-1) available soil Cu (the NH4OAc extractable Cu) or 1000 mg kg(-1) total Cu. Under the field conditions, a biomass yield of 9 ton ha(-1) was recorded at the soil available Cu level of 77 mg kg(-1), as estimated by the NH4OAc extraction method. Concentration-dependent uptake of Cu by the plant occurred mainly at the early growth stage, and at the late stage, there is no difference in shoot Cu concentrations grown at different extractable soil Cu levels. The extractability of Cu from the highly polluted soil is much greater by the roots than that by the shoots. The NH4OAc extractable Cu level in the polluted soil was reduced from 78 to 55 mg kg(-1) in the soil after phytoextraction and removal of Cu by the plant species for one growth season. The depletion of extractable Cu level in the rhizosphere was noted grown in the mined area, even at high Cu levels, the NH4OAc extractable Cu in the rhizosphere was 30% lower than that in the bulk soil. These results indicate that phytoextraction of E. splendens can effectively reduce the plant-available Cu level in the polluted soils.     

A comparison of the rhizosphere-based method with DTPA, EDTA, CaCl2, and NaNO3 extraction methods for prediction of bioavailability of metals in soil to barley

A rhizosphere-based method was compared with DTPA, EDTA, CaCl2, and NaNO3 extraction methods for the evaluation of bioavailability of heavy metals in soil to barley. The extractable amounts of Cr, Cu, Zn and Cd analyzed by the rhizosphere-based method correlated significantly with the metal content of barley roots. The extractable metals identified by DTPA, EDTA, CaCl2 and NaNO3 methods exhibited relatively poor or no correlation with the metal content of barley roots. The stepwise multiple regression equation of the rhizosphere-based method was the simplest one, as no soil properties needed to be entered, whereas the equations for the DTPA, EDTA, CaCl2 and NaNO3 extraction methods always require those variables. The most distinct feature of the rhizosphere-based method was that the proposed method was suitable for acidic, neutral and near alkaline soils. In contrast, the other extraction methods were restricted to soil types. In summary, the rhizosphere-based method is the most robust approach for evaluation of bioavailability of metals in soil to barley.     

Implications of rhizospheric heavy metals and nutrients for the growth of alfalfa in sludge amended soil

Rhizospheric distribution of nutrients and heavy metals in sludge amended soil was investigated using the rhizobag technique to give an indication of the release of metals from wastewater sludge. DTPA-extractable Zn, Cd, Ni and Mn, and available P, K and NH4+-N in the rhizosphere were markedly depleted when soil was amended with sludge. There was no conspicuous depletion or accumulation of DTPA-extractable Cu in the rhizosphere when the soil was amended with sewage sludge but DTPA-extractable Fe accumulated in the rhizosphere when the soil was amended with increasing amounts of sludge. The pH value in the rhizosphere increased with distance from the roots when soil was amended with larger amounts of sludge. The exchangeable fraction of Cu in the rhizosphere was depleted whether or not the soil was treated with sludge. Carbonate, oxide, organic and residual fractions of Cu and Zn were depleted in the rhizosphere at a distance of 0-2 mm from the roots when soil was amended with 50% sludge. Application of sewage sludge had a positive effect on alfalfa growth. With an increase in sludge amounts, the concentrations of Fe, Cu and Zn in alfalfa shoots did not change. Soil amendments with less than 25% sludge did not increase the availability or mobility of heavy metals. The depletion in rhizospheric DTPA-extractable Zn, Cd and Ni indicates that with the sole exception of Cu, release of metals from sludge amended soil was very limited.     

Retention and distribution of heavy metals in mangrove soils receiving wastewater

The distribution and chemical fractionation of heavy metals retained in mangrove soils receiving wastewater were examined by soil column leaching experiments. The columns, filled with mangrove soils collected from two swamps in Hong Kong and the People's Republic of China, were irrigated three times a week for 150 days with synthetic wastewater containing 4 mg l(-1) Cu, 20 mg l(-1) Zn, 20 mg l(-1) Mn and 0.4 mg l(-1) Cd. Soil columns leached with artificial seawater (without any heavy metals) were used as the control. At the end of the leaching experiments, soil samples from each column were divided into five layers according to its depth viz. 0-1, 1-3, 3-5, 5-10 and > 10 cm, and analyzed for total and extractable heavy metal content. The fractionation of heavy metals in the surface soil samples (0-1 cm) was investigated by the sequential extraction technique. In both types of mangrove soils, the surface layer (0-1 cm) of the columns receiving wastewater had significantly higher concentrations of total Cu, Cd, Mn and Zn than the control. Concentrations declined significantly with soil depth. The proportion of exchangeable heavy metals in soils receiving wastewater was significantly higher than that found in the control, about 30% of the total heavy metals accumulated in the soil masses of the treated columns were extracted by ammonium acetate at pH 4. The sequential extraction results show that in native mangrove soils (the soils without any treatment), the major portion of Cu, Zn, Mn and Cd was associated with the residual and precipitated fractions with very low concentrations in more labile phases. However, in mangrove soils receiving wastewater, a significantly higher percentage of Mn, Zn and Cd was found in the water-soluble and exchangeable fractions. Copper appeared to be more strongly adsorbed in mangrove soils than the other heavy metals. In general, heavy metal accumulation in the surface mangrove soils collected in Hong Kong was higher than those in the PRC, although the metals in the latter soil type were more strongly bound. These findings suggest that whether the heavy metal retained in managrove soils becomes a secondary source or a permanent sink would depend on the kinds of heavy metals and also the types of mangrove soils.     

Solid speciation and mobility of potentially toxic elements from natural and contaminated soils: a combined approach

The study area (Szklary Massif, SW Poland) comprises three sites of different soil provenance: (1) natural serpentine Cambisol, (2) anthroposol situated on waste dump and (3) cultivated Inceptisol developed on glacial tills next to the dump. Potentially toxic elements (PTE) have either lithogenic or anthropogenic origins in these sites. The chemical partitioning of Co, Cr, Cu, Ni, Pb and Zn among solid forms was determined by sequential extractions coupled with direct mineral identifications (SEM, electron microprobe analysis - EMPA, and XRD). Examination of solid residues after several extraction steps was conducted in order to discuss the indirect speciation obtained by the extraction method. Total concentrations of PTE having anthropogenic origin greatly exceed those of lithogenic origin. Mobility of studied PTE is variable in the different environments except for Cr which is always mostly found in residual fractions of extractions. Cu and Pb are more mobile than Cr and Co in all soils. Zn is more stable (Cu>Pb>Ni>Co>Zn>Cr) in the serpentine soil and cultivated epipedon (Pb>Cu>Zn>Ni>Co>Cr) than in the anthroposol (Zn>CuPb>Ni>Co>Cr). PTE of lithogenic origin are generally less mobile than those from anthropogenic origin except Ni which is more mobile in the serpentine soil. Nonetheless, mineral forms of metals better determine their mobility than metal origin. Identification by direct methods of the PTE mineral form was not possible for metals present at low concentrations (Cu, Pb). However, direct mineralogical examinations of the solid residues of several extractions steps improved the assessment of the PTE solid speciation and mobility, particularly for Cr, Ni and Zn.     

Investigations of chemical fraction of Co and Ni in industrial fly ash and mobility of metals in environmental conditions

The quantitative evaluation of chemical fraction of Co and Ni in the industrial fly ash by methods of five step sequential extraction was carried out in order to characterize metal mobility in environmental conditions. The research involved (i) water-soluble (pH=7), (ii) acid-soluble (pH=5), (iii) oxide, (iv) sulfide and (v) residue metal fractions. It was discovered, that the total extraction of the studied metals from fly ash to solutions take place in the following quantities Co - 35.5 and Ni - 153.0mgkg(-1). The investigations of chemical fractions proved that the subject metals occur mainly in fly ash as: oxide (Co - 7.0, Ni - 28.5mgkg(-1)) and residue (Co - 11.5, Ni - 42.5mgkg(-1)) as well as sulfide (Co - 8.5, Ni - 46.5mgkg(-1)). Low concentrations of metals for water-soluble fraction (Co - 0.7, Ni - 1.2mgkg(-1)) and acid-soluble fraction (Co - 4.5, Ni - 23.5mgkg(-1)) were observed. The fractions of Co and Ni leachable from the ash in environmental conditions contain: 24.0% (Co) and 23.3% (Ni) of metal total amount in the industrial fly ash. The obtained mobility parameter of Co and Ni can be applied to estimate the concentration increase of mobile and hardly mobile forms of these metals in soil polluted with the ash.     

巢湖表层沉积物中重金属的分布特征及其污染评价

以巢湖表层沉积物为研究对象,利用BCR连续提取法研究了沉积物中Cr、Co、Ni、Cu、Cd、Zn、V和Pb等8种重金属元素的分布特征,同时运用潜在风险指数法和地累积指数法综合评价了巢湖沉积物中重金属的生态风险。结果表明,巢湖沉积物中的重金属含量在空间上表现出东西高、中间低的分布特征。巢湖表层沉积物中Cr、Co、Ni、V和Cu 5种重金属都主要以残渣态为主,Zn和Cd主要以弱酸提取态为主,Pb以可还原态为主,同时,Co和Cu 2种元素的可交换态及可还原态含量占有较高比例,具有潜在危害性。相关性分析显示,Cr、Cu、Pb、Ni、Zn和Cd 6种重金属元素的来源和分布可能具有相似性,Co和V 2种重金属元素具有相似的地球化学行为且其主要来源可能与其他几种重金属不同。潜在生态风险指数评价结果表明,巢湖表层沉积物中8种重金属元素构成的生态危害顺序为:Cd>Pb>Co>Cu>Ni>Zn>V>Cr,Cd具有高的生态危害等级,其他7种重金属元素均为低生态危害等级。地累积指数法评价结果表明:巢湖沉积物重金属元素的富集程度为Cd>Zn>Pb>Co>Cu>V>Ni>Cr,Cr属于清洁级别,Co、Cu、V和Ni处于轻度污染水平,Zn和Pb处于偏中度污染,Cd达到了重污染水平。