含MTBE废水处理研究进展

主要介绍了含MTBE废水处理的工艺进展以及一些新方法、技术在实验以及生产实践中的应用，如氧化、气提、吸收、降解和自然衰减等，同时对各种方法的优缺点进行了评述，对未来的工艺进步做了展望。     

粉末活性炭-生物处理技术及工程应用

粉末活性炭-生物处理技术是一种强化生物工艺。本文介绍了该工艺的设计方法以及作者在不同化工废水处理中的应用实例，表明该技术在处理难生物降解的工业废水中有很好的应用前景，而且经济上可行。     

放射性废水处理技术研究进展

强调了放射性废水处理技术研究的重要性,系统综述了国内外各种放射性废水处理技术的工艺、原理,并对其适用条件、优缺点等进行了分析探讨,介绍了国外的最新研究成果.指出多种处理技术的联合使用将取得较好效果,而采用闭路循环、提高利用效率才是最终出路.     

拟除虫菊酯类农药废水处理技术研究进展

拟除虫菊酯类农药废水COD浓度高、毒性大、污染物成分复杂、较难生物降解。通过系统阐述目前国内外各种针对拟除虫菊酯类农药废水处理技术的最新研究动态,分析了各种方法的优缺点,并对此类农药废水处理技术的发展方向进行了展望,可为此类废水处理工艺选择和工程设计提供有益参考。     

水解酸化-活性污泥法处理印染废水研究

以江苏某印染企业废水工程为例，探讨了水解酸化活性污泥法在印染废水处理中的应用。结果表明该工艺可以较好地解决PVA、染料的处理问题，印染废水处理后达到《纺织染整工业水污染物排放标准》(GB4287-92)一级排放标准。与传统的物理化学-生化法相比，该工艺具有处理效率高、运行稳定、动力消耗低和污泥量少等优点。     

电镀废水膜分离法问世

电镀废水回用技术的开发成果，首次将纳滤及反渗透技术集成用来处理电镀废水，这一成果已经申请“电镀废水处理零排放的膜分离方法”发明专利。该成果开发创新了新型膜组件等硬件技术和膜工艺设计、优化、管理运行等方面的软件，采用纳滤膜除去废水中的一价盐，并对镍离子预浓缩，再通过二级反渗透进一步浓缩镍，使其浓缩100倍，     

汽车涂装废水的处理

汽车涂装废水污染物种类较多，水质、水量波动较大，工程、工艺设计时需对源头水进行分流，并对高浓度废液进行分质预处理，以提高后续处理工艺的稳定性，进而确保废水处理稳定达标排放。南汽集团公司所属南维柯车身厂涂装废水处理站，在工程工艺设计中，根据上述原理，同时，根据所执行的一级排放标准的需要，选择了两级物化加水解酸化，再加SBR生化处理方法。实践表明，该污水处理站工程，工艺费用合理，净化效果稳定，并达到相应排放标准。     

含MTBE废水处理研究进展

主要介绍了含MTBE废水处理的工艺进展以及一些新方法、技术在实验以及生产实践中的应用 ,如氧化、气提、吸收、降解和自然衰减等 ,同时对各种方法的优缺点进行了评述 ,对未来的工艺进步做了展望     

基于层次分析法的电解锰废水处理技术评价

基于电解锰废水处理技术现状，采用层次分析法建立了一个4层10指标3方案的技术评价体系，从环境效益、经济效益、技术性能3个方面，对3种电解锰废水处理技术进行分析。采用专家评分的方法，根据各指标的权重，对3种技术进行评分。结果表明，电解锰废水全过程控制技术由于低廉的运行成本，较易运行，较高的锰、铬、氨氮去除率和回收率等优点使其总评分高于其他2种技术，是电解锰废水处理技术的首选。     

改革引进电冰箱生产线中的废水处理工艺

根据引进电冰箱生产的废水处理工艺在运转中存在腐蚀性强、污染环境、劳动条件恶劣、运转费用高等缺点以及废水中Zn~(2+)、PO_4~(3-)、SS、COD等含量高的特点,对废水处理工艺进行了改革,并对两种工艺的优缺点进行了比较。     

The application of flotation for the downstream separation of metal-loaded microorganisms

The studied innovative wastewater treatment process involved the initial abstraction of heavy metal ions onto fungal or stalks biomass (biosorption), followed by the application of a typical flotation stage for the efficient downstream separation of metal-laden biosorbent particles. The ability of microorganisms to remove metal ions from dilute aqueous solutions is a well-known property. Flotation originated from the minerals' processing field; however, it has nowadays found application in the wastewater treatment field. The two processes of biosorption and flotation can be efficiently combined, forming the so-called 'biosorptive flotation' process.     

The process of flotation: an efficient solid/liquid separation technique for biological materials

The studied innovative wastewater treatment process involved the initial abstraction of heavy metal ions onto fungal or stalks biomass (biosorption), followed by the application of a typical flotation stage for the efficient downstream separation of metal-laden biosorbent particles. The ability of microorganisms to remove metal ions from dilute aqueous solutions is a well-known property. Flotation originated from the minerals' processing field; however, it has nowadays found application in the wastewater treatment field. The two processes of biosorption and flotation can be efficiently combined, forming the so-called 'biosorptive flotation' process.     

Biosorption properties of zinc(II) from aqueous solutions by Pseudevernia furfuracea (L.) Zopf

Pseudevernia furfuracea (L.) Zopf biosorption efficiency for zinc(II) was determined. The biosorption efficiency of Zn(II) onto P. furfuracea was significantly affected by the parameters of pH, biomass concentration, stirring speed, contact time, and temperature. The maximum biosorption efficiency of P. furfuracea was 92% at 10 mg/L Zn(II), for 5 g/L lichen biomass dosage. The biosorption of Zn(II) ions onto biomass was better described by the Langmuir model and the pseudo-second-order kinetic. The obtained thermodynamic parameters from biosorption of Zn(II) ions onto biomass were feasible, exothermic, and spontaneous. The different desorbents were used to perform the desorption studies for Zn(II)-loaded biomass. Fourier transform infrared (FTIR) spectroscopy was used to determine the participating functional groups of P. furfuracea biomass in Zn (II) biosorption. The broad and strong bands at 3292–3304 cm^?1 were due to bound hydroxyl (–OH) or amine (–NH) groups. The effective desorptions were obtained up to 96% with HNO₃. P. furfuracea is an encouraging biosorbent for Zn(II) ions, with high metal biosorption and desorption capacities, availability, and low cost. It was believed that by using this new method in which biomass is used as a sorbent, the toxic pollutants could be selectively removed from aqueous solutions to desired low levels. The remarkable properties of lichens in the transformation and detoxification of organic and inorganic pollutants are well known, and many processes have received attention in the general area of environmental biotechnology and microbiology.

Implications:The remarkable properties of lichens in the biosorption capacity of organic and inorganic pollutants are well known, and many processes have received attention in the general area of environmental biotechnology and microbiology.     

Characterization of Cd-, Pb-, Zn-resistant endophytic Lasiodiplodia sp. MXSF31 from metal accumulating Portulaca oleracea and its potential in promoting the growth of rape in metal-contaminated soils

The aim of this study was to characterize the features of a Cd-, Pb-, and Zn-resistant endophytic fungus Lasiodiplodia sp. MXSF31 and to investigate the potential of MXSF31 to remove metals from contaminated water and soils. The endophytic fungus was isolated from the stem of Portulaca oleracea growing in metal-contaminated soils. The maximum biosorption capacities of MXSF31 were 3.0?×?10³, 1.1?×?10⁴, and 1.3?×?10⁴ mg kg^?1 for Cd, Pb, and Zn, respectively. The biosorption processes of Cd, Pb, and Zn by MXSF31 were well characterized with the pseudo-second-order kinetic model. The biosorption isotherm processes of Pb and Zn by the fungus were fitted better with the Langmuir model, while the biosorption processes of Cd was better fitted with the Freundlich model. The biosorption process of MXSF31 was attributed to the functional groups of hydroxyl, amino, carbonyl, and benzene ring on the cell wall. The active biomass of the strain removed more Cd, Pb, and Zn (4.6?×?10⁴, 5.6?×?10⁵, and 7.0?×?10⁴ mg kg^?1, respectively) than the dead biomass. The inoculation of MXSF31 increased the biomass of rape (Brassica napus L.), the translocation factor of Cd, and the extraction amount of Cd by rape in the Cd?+?Pb-contaminated soils. The results indicated that the endophytic fungus strain had the potential to remove heavy metals from water and soils contaminated by multiple heavy metals, and plants accumulating multiple metals might harbor diverse fungi suitable for bioremediation of contaminated media.     

Biosorption of Cr3+, Cd2+ and Cu2+ ions by blue-green algae Spirulina sp.: kinetics, equilibrium and the mechanism of the process

The process of biosorption of heavy metal ions (Cr3+, Cd2+, Cu2+) by blue-green algae Spirulina sp. is discussed in this paper. Spirulina sp. was found to be a very efficient biosorbent. The aim of the present study was to investigate quantitatively the potential binding sites present at the surface of Spirulina sp., using both potentiometric titrations and adsorption isotherms. The kinetic experiments showed that the process equilibrium was reached quickly, in less than 5-10 min. It was found that the equilibrium dependence between biosorption capacity and bulk metal ion concentration could be described with Langmuir equation. This suggests that the mechanism of biosorption is rather chemisorption than physical adsorption and was further confirmed by the low surface area associated with physical adsorption and by the presence of cations that appeared in the solution after biosorption. The maximum contribution of physical adsorption in the overall biosorption process was evaluated as 3.7%. It was proposed that functional groups on the cell surface contributed to the binding of metal ions by a biosorbent via equilibrium reaction. Three functional groups capable of cation exchange were identified on the cell surface. The biomass was described as weakly acidic ion exchanger. Since deprotonation of each functional group depends on pH, the process of biosorption is strongly pH-dependent. This was confirmed in the biosorption experiments carried out at different pH. The contribution of functional groups in the biosorption process was confirmed by chemical modification of the groups. Chemically blocked groups did not show neither biosorption nor ion-exchange capabilities. It has been shown that growth conditions can affect the metal adsorption properties of microalgae. The paper also discusses desorption characteristics of the biosorbent. The criteria for desorption were high elution efficiency and preservation of biosorptive properties. Desorbent that possessed these characteristics was nitric acid.     

Biosorption of alpacide blue from aqueous solution by lignocellulosic biomass: <Emphasis Type="Italic">Luffa cylindrica</Emphasis> fibers

The aim of the present work is to develop an effective and inexpensive pollutant-removal technology using lignocellulosic fibers: Luffa cylindrica, for the biosorption of an anionic dye: alpacide blue. The influence of some experimental parameters such as pH, temperature, initial concentration of the polluted solution, and mass of the sorbent L. cylindrica on the biosorption of alpacide blue by L. cylindrica fibers has been investigated. Optimal parameters for maximum quantity of biosorption dye were achieved after 2 h of treatment in a batch system using an initial dye concentration of 20 mg/L, a mass of 1 g of L. cylindrica fibers, and pH 2. In these conditions, the quantity of dye retained is 2 mg/g and the retention rate is 78 %. Finally, a mathematical modeling of kinetics and isotherms has been used for mathematical modeling; the model of pseudo-second order is more appropriate to describe this phenomenon of biosorption. Concerning biosorption isotherms, the Freundlich model is the most appropriate for a biosorption of alpacide blue dye by L. cylindrica fibers.     

Evaluation of different isotherm models,kinetic, thermodynamic,and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm.

The biosorption characteristics of Cu(II) ions from aqueous solution using Lobaria pulmonaria (L.) Hoffm. biomass were investigated. The biosorption efficiency of Cu(II) onto biomass was significantly influenced by the operating parameters. The maximum biosorption efficiency of L. pulmonaria was 65.3% at 10 mg/L initial metal concentration for 5 g/L lichen biomass dosage. The biosorption of Cu(II) ions onto biomass fits the Langmuir isotherm model and the pseudo-second-order kinetic model well. The thermodynamic parameters indicate the feasibility and exothermic and spontaneous nature of the biosorption. The effective desorption achieved with HCl was 96%. Information on the nature of possible interactions between the functional groups of the L. pulmonaria biomass and Cu(II) ions was obtained via Fourier transform infrared (FTIR) spectroscopy. The results indicated that the carboxyl (–COOH) and hydroxyl (–OH) groups of the biomass were mainly involved in the biosorption of Cu(II) onto L. pulmonaria biomass. The L. pulmonaria is a promising biosorbent for Cu(II) ions because of its availability, low cost, and high metal biosorption and desorption capacities.

Implications: Lobaria pulmonaria is a promising biosorbent for Cu(II) ions because of its availability, low cost, and high metal biosorption and desorption capacities. To the best of our knowledge, this is the first paper on the biosorption Cu by L. pulmonaria.     

非固定化和固定化啤酒酵母对Cd^2＋和Cu^2＋的吸附特性研究

对比了不同吸附剂对重金属的吸附效果，同时研究了啤酒酵母的固定化方法、菌体用量对吸附效果的影响、非同定化和固定化啤酒酵母吸附热力学特性。研究结果表明，非固定化死啤酒酵母对Cd^2＋的单位菌体吸附量是常用吸附剂活性炭的3倍；由1：3的海藻酸钠与碱处理啤酒酵母（w／w）制得的固定化颗粒吸附效果最好；菌体用量的增加会降低单位菌体对重金属的吸附量；啤酒酵母对重金属的吸附位点有限，Cd^2＋的实际最大吸附量为13．95mg／g，Cu^2＋为7．67μg／g。非固定化和固定化啤酒酵母对Cu^2＋和Cd^2＋的等温吸附过程均可用Linear方程、Langmuir方程和Freundlich方程来进行拟合，但非同定化啤酒酵母以Langmuir方程最优，其拟合计算的最大吸附量qmzxCd和qmxxCu分别为13．96mg／g和8．01mg／g；固定化啤酒酵母以Freundlich方程最优，实际最大吸附量Cd为75．41mg／g，Cu为66．58mg／g。     

酸度对好氧颗粒污泥生物吸附含铅废水影响的研究

为了有效地控制铅污染，利用序批式反应器（sequencing batch reactor,SBR）培养的以醋酸钠为碳源的好氧颗粒污泥作为吸附剂，进行生物吸附含铅废水的效能和机理的研究。通过考察酸度、接触时间和Pb²⁺初始浓度等因素的影响，验证好氧颗粒污泥吸附模型，并利用不同的脱附剂，进一步解析其生物吸附的Pb²⁺。实验结果表明, 酸度是影响好氧颗粒污泥生物吸附Pb²⁺的关键因素，当初始pH为5时，好氧颗粒污泥对含铅废水生物吸附效果最好。对低浓度（0～20 mg/L）含铅废水， 10 min后可快速达到吸附平衡。好氧颗粒污泥对Pb²⁺的实测饱和吸附量为101.97±9.00 mg/g，符合朗缪尔（Langmuir）模型。好氧颗粒污泥生物吸附Pb²⁺的过程，伴随着pH值的升高和K⁺、 Ca²⁺、 Mg²⁺的释放，此现象揭示离子交换作用是好氧颗粒污泥生物吸附Pb²⁺的机理之一。此外，脱附剂HNO₃、EDTA和CaCl₂能实现Pb²⁺的回收和好氧颗粒污泥的重复利用。     

满江红干体对锌离子的生物吸附

以满江红干体为生物吸附剂，研究了不同条件下对废水中Zn²⁺的净化作用。结果表明，满江红干体对Zn²⁺的吸附是一个快速的过程，前5 min的吸附量达到最大吸附量的62.9%，30 min达到吸附平衡；初始pH值对Zn²⁺的吸附有显著的影响，最适pH值为6；随着干体量的增加，吸附率逐渐提高而吸附量则降低；随着Zn²⁺初始浓度的增加，吸附率逐渐降低而吸附量则提高。满江红干体对Zn²⁺的吸附符合Langmuir吸附等温线方程，最大吸附容量达57.5 mg/g。5次吸附解吸循环实验数据表明，重复次数和再生处理对满江红干体的吸附能力没有产生显著影响。因此，满江红干体在处理含Zn²⁺废水中的重复使用是可行的。