Heavy metal (Cu,Cd, Pb,Cr) washing from river sediment using biosurfactant rhamnolipid

Heavy metal-contaminated sediments posed a serious threat to both human beings and environment. A biosurfactant, rhamnolipid, was employed as the washing agent to remove heavy metals in river sediment. Batch experiments were conducted to test the removal capability. The effects of rhamnolipid concentration, washing time, solution pH, and liquid/solid ratio were investigated. The speciation of heavy metals before and after washing in sediment was also analyzed. Heavy metal washing was favored at high concentration, long washing time, and high pH. In addition, the efficiency of washing was closely related to the original speciation of heavy metals in sediment. Rhamnolipid mainly targeted metals in exchangeable, carbonate-bound or Fe-Mn oxide-bound fractions. Overall, rhamnolipid biosurfactant as a washing agent could effectively remove heavy metals from sediment.

     

Inconsistency and comprehensiveness of risk assessments for heavy metals in urban surface sediments

Numerous indices have been developed to assess environmental risk of heavy metals in surface sediments, including the total content based geoaccumulation index (I_geo), exchangeable fraction based risk assessment code (RAC), and biological toxicity test based sediment quality guidelines (SQGs). In this study, the three indices were applied to freshwater surface sediments from 10 sections along an urbanization gradient of the Grand Canal, China to assess the environmental risks of heavy metals (Cu, Pb, Zn, Cd, and Cr) and to understand discrepancies of risk assessment indices and urbanization effects regarding heavy metal contamination. Results showed that Cd, Zn, and Pb were the most enriched metals in urban sections assessed by I_geo and over 95% of the samples exceeded the Zn and Pb thresholds of the effect range low (ERL) of SQGs. According to RAC, Cu, Zn, Cd, and Cr had high risks of adversely affecting the water quality of the Grand Canal due to their remarkable portions of exchangeable fraction in surface sediment. However, Pb showed a relative low risk, and was largely bounded to Fe/Mn oxides in the urban surface sediments. Obviously, the three assessment indices were not consistent with each other in terms of predicting environmental risks attributed to heavy metals in the freshwater surface sediments of this study. It is recommended that risk assessment by SQGs should be revised according to availability and site specificity. However, the combination of the three indices gave us a comprehensive understanding of heavy metal risks in the urban surface sediments of the Grand Canal.     

Estimation of atmospheric trace metal emissions in Vilnius City, Lithuania, using vertical concentration gradient and road tunnel measurement data

A new approach for the estimation of trace metal emissions in Vilnius city was implemented, using vertical concentration profiles in the urban boundary layer and road tunnel measurement data. Heavy metal concentrations were examined in fine and coarse particle fractions using a virtual impactor (cut-off size diameter 2.5 μm). Negative vertical concentration gradients were obtained for all metals (Ba, Pb, V, Sb, Zn) and both fractions. It was estimated that the vertical concentration gradient was formed due to emissions from an area of about 12 km². Road tunnel measurements indicated that trace metal concentrations on fine particles were lower than those on coarse particles, which suggested that re-emitted road dust was highly enriched in trace metal due to historic emissions within the tunnel. Emission rates of different pollutants in the road tunnel were calculated using pollutant concentration differences at the tunnel entrance and exit and traffic flow data. Heavy metal emission rates from the area of Vilnius city were estimated using the vertical gradient of heavy metal concentrations and the coefficient of turbulent mixing, as derived from meteorological measurement data. The emission values calculated by the two different methods coincided reasonably well, which indicated that the main source of airborne trace metals in Vilnius city is traffic. The potential of the vertical concentration gradient method for the direct estimation of urban heavy metal emissions was demonstrated.     

Occurrence and possible sources of polychlorinated biphenyls in surface sediments from the Wuhan reach of the Yangtze River, China

Twenty-seven surface sediment samples were collected from the mainstream and eight tributaries of the Wuhan reach of the Yangtze River, China, in 2005, in order to assess the distribution, possible sources, and potential risk of polychlorinated biphenyls (PCBs) in the environment. The total concentrations of PCBs (the sum of 39 congeners) ranged from 1.2 to 45.1 ng g⁻¹ dry weight, with a mean value of 9.2 ng g⁻¹. Sediment samples with the highest PCB concentrations came from the tributary sites, which are closer to PCB sources. Conversely, PCB concentrations in the sediment from the mainstream sites of Yangtze River were relatively low. The observed PCB levels were higher than those found in the sediments of other rivers in China, but lower than those in river sediments from other urban areas and harbors around the world. Low-chlorinated PCBs, dominated by tetra-PCBs and penta-PCBs, were identified as being prevalent in the surface sediments. Correlation analyses between the PCBs and the geochemistry and heavy metal content of the sediments suggest that the washing of these compounds from the land into the river by floods and heavy rains, or industrial wastewater and domestic sewage, may be the major sources of the PCBs. According to established sediment quality guidelines, the risk of adverse biological effects from the levels of PCBs recorded at most of the studied sites should be insignificant, although the higher concentrations at other sites could cause acute biological damage.     

Using Various Guidelines and Approaches for the Assessment of Marine Sediment Quality

The aim of the present study is to explore the implications of using different quality guidelines and approaches for marine sediment characterization. As a case study, the sediments of Souda Port, Crete, Greece, were examined in order to assess heavy metal contamination and to estimate anthropogenic contribution and potential adverse effects to aquatic environment, as well as to indicate feasible future management options. The concentration of six heavy metals (Co, Cr, Cu, Ni, Pb, and Zn) was determined and compared with different sediment quality guidelines (SQGs) and regional/national criteria established for dredged material characterization and management. In addition, the geo-accumulation index (I_geo) was calculated and the sediments toxicity and heavy metals bioavailability were determined. Based on the experimental data, it is deduced that Souda sediments are characterized as moderately polluted only in terms of Co, Ni, and Pb.     

巢湖表层沉积物中重金属的分布特征及其污染评价

以巢湖表层沉积物为研究对象,利用BCR连续提取法研究了沉积物中Cr、Co、Ni、Cu、Cd、Zn、V和Pb等8种重金属元素的分布特征,同时运用潜在风险指数法和地累积指数法综合评价了巢湖沉积物中重金属的生态风险。结果表明,巢湖沉积物中的重金属含量在空间上表现出东西高、中间低的分布特征。巢湖表层沉积物中Cr、Co、Ni、V和Cu 5种重金属都主要以残渣态为主,Zn和Cd主要以弱酸提取态为主,Pb以可还原态为主,同时,Co和Cu 2种元素的可交换态及可还原态含量占有较高比例,具有潜在危害性。相关性分析显示,Cr、Cu、Pb、Ni、Zn和Cd 6种重金属元素的来源和分布可能具有相似性,Co和V 2种重金属元素具有相似的地球化学行为且其主要来源可能与其他几种重金属不同。潜在生态风险指数评价结果表明,巢湖表层沉积物中8种重金属元素构成的生态危害顺序为:Cd>Pb>Co>Cu>Ni>Zn>V>Cr,Cd具有高的生态危害等级,其他7种重金属元素均为低生态危害等级。地累积指数法评价结果表明:巢湖沉积物重金属元素的富集程度为Cd>Zn>Pb>Co>Cu>V>Ni>Cr,Cr属于清洁级别,Co、Cu、V和Ni处于轻度污染水平,Zn和Pb处于偏中度污染,Cd达到了重污染水平。     

The sorption of heavy metal species by sediments in soakaways receiving urban road runoff

Infiltration facilities are designed for both the retention of non-point pollutants and the replenishment of groundwater in urban areas. In this study, sorption tests were conducted to evaluate the speciation of heavy metals and their behaviour in infiltration facilities receiving urban road runoff containing high DOC concentrations and stable heavy metal organic complexes. Road dust and three soakaway sediments were collected from heavy traffic areas and a residential area with an infiltration-type sewerage system in Tokyo, Japan. Sequential multiple batch tests were conducted by adding prepared road dust leachate (artificial road runoff) or deionised water to soakaway sediment to obtain soakaway sediment leachate (artificial percolating water from soakaway sediment), which mimicked the sorption by sediments in soakaways receiving urban road runoff. Heavy metal speciation was assessed by means of a combination of anion-exchange resin measurements and MINTEQA2 model calculations, and further validated by chelating resin measurements. In road dust leachates and soakaway sediment leachates, Cu predominantly existed as organic complexes and carbonates, whereas most Mn, Zn and Cd were found to exist in the form of free ions and carbonate complexes. Stable organic complexes of Cu in road dust leachates were strongly adsorbed by soakaway sediments despite the limited adsorption of DOC. On the other hand, desorption of free Mn, Zn and Cd ions from the sediment receiving road dust leachates was observed, indicating that heavy metals such as Mn, Zn and Cd may ultimately reach groundwater as free ions.     

Vertical distribution of acid-volatile sulfide and simultaneously extracted metals in mangrove sediments from the Jiulong River Estuary,Fujian, China

Background Acid-volatile sulfide (AVS) is operationally defined as sulfides in sediment, which are soluble in cold acid, and is reported as the most active part of the total sulfur in aquatic sediments. It is a key partitioning phase controlling the activities of divalent cationic heavy metals in sediment. Methods In order to examine this in mangrove environments, six sites were selected along the Jiulong River Estuary in Fujian, China, which had previously been reported to be polluted by heavy metals. Sediments were sampled from 0–60 cm depth at each site, and the spatial distribution of AVS and SEM (simultaneously extracted metals: copper, cadmium, zinc, and lead) were determined. Results and Discussion The results indicate that the AVS concentrations had a spatial variation, ranging from 0.24 to 16.10 μmol g⁻¹ sediment dry weight. The AVS concentration in the surface layer is lower than that of the deeper sediment, with peak values in the 15–30 cm horizon. There was no correlation between the AVS value and organic matter content or total dissolved salts, but a significant positive correlation of AVS with surface sediment (0–5 cm) moisture content was found. This indicates that water logged sediments tend to have a high AVS value. The amount of SEM was within the range of 0.33–2.80 μmol g⁻¹ sediment dry weight and decreased with sediment depth. Conclusions There was a marked variation in AVS and SEM among different sites studied. AVS concentrations were generally lower in the surface sediments, while SEM concentrations slightly decreased with the depth. Higher concentrations of SEM found in the upper layers of the sediments confirm the earlier suggestions that this study area may suffer from increasing heavy metal pollution. Recommendations and Perspectives When monitoring environmental impacts by using AVS, the micro and large-scale spatial variation as well as vertical distribution need to be estimated to avoid misleading results. Both AVS and SEM concentrations in different sediment layers should be taken into account in assessing the potential impact of heavy metals on the biotic environment.     

Deposition velocities to Sorbus aria, Acer campestre, Populus deltoides X trichocarpa 'Beaupré', Pinus nigra and X Cupressocyparis leylandii for coarse, fine and ultra-fine particles in the urban environment

Trees are effective in the capture of particles from urban air to the extent that they can significantly improve urban air quality. As a result of their aerodynamic properties conifers, with their smaller leaves and more complex shoot structures, have been shown to capture larger amounts of particle matter than broadleaved trees. This study focuses on the effects of particle size on the deposition velocity of particles (Vg) to five urban tree species (coniferous and broadleaved) measured at two field sites, one urban and polluted and a second more rural. The larger uptake to conifers is confirmed, and for broadleaves and conifers Vg values are shown to be greater for ultra-fine particles (Dp < 1.0 microm) than for fine and coarse particles. This is important since finer particles are more likely to be deposited deep in the alveoli of the human lung causing adverse health effects. The finer particle fraction is also shown to be transported further from the emission source; in this study a busy urban road. In further sets of data the aqueous soluble and insoluble fractions of the ultra-fines were separated, indicating that aqueous insoluble particles made up only a small proportion of the ultra-fines. Much of the ultra-fine fraction is present as aerosol. Chemical analysis of the aqueous soluble fractions of coarse, fine and ultra-fine particles showed the importance of nitrates, chloride and phosphates in all three size categories at the polluted and more rural location.     

Heavy Metals in Urban Soils of East St. Louis,IL Part II: Leaching Characteristics and Modeling

ABSTRACT

The city of East St. Louis, IL, has a history of abundant industrial activities including smelters of ferrous and non-ferrous metals, a coal-fired power plant, companies that produced organic and inorganic chemicals, and petroleum refineries. Following a gross assessment of heavy metals in the community soils (see Part I of this two-part series), leaching tests were performed on specific soils to elucidate heavy metal-associated mineral fractions and general leachability. Leaching experiments, including the Toxicity Characteristic Leaching Procedure (TLCP) and column tests, and sequential extractions, illustrated the low leachability of metals in East St. Louis soils. The column leachate results were modeled using a formulation developed for fly ash leaching. The importance of instantaneous dissolution was evident from the model. By incorporating desorption/adsorption terms into the source term, the model was adapted very well to the time-dependent heavy metal leachate concentrations. The results demonstrate the utility of a simple model to describe heavy metal leaching from contaminated soils.     

Consequences and implication of heavy metal spatial variations in sediments of the Keelung River drainage basin, Taiwan

A great deal of effort was enforced to reduce the pollution of the Keelung River in the past 20 years. A set of sediments covering most of the Keelung River drainage basin was analyzed for bulk sediment heavy metal concentrations, grain size content and Pb-210 dating in order to understand the spatial variations of sediment heavy metal contents as well as to evaluate the effectiveness of pollution control. The results showed that anthropogenic pollution and grain size are two of the most important factors in controlling spatial variations of metals in the Keelung River sediments. In addition, little reduction of sediment heavy metal concentrations was observed in the Keelung River drainage basin. Large spatial variations of metals and grain size were observed. High concentrations of zinc, copper, lead and cadmium were found in sediments near the main outlets of the adjacent Da-Wu-Lun Industrial Park and municipal waste drainage systems. Anthropogenic sources of heavy metal have altered the natural sediment heavy metal distributions. Positive linear relationships between aluminum, iron and fine-grained sediments showed that spatial grain size variations controlled the natural aluminum and iron concentrations in sediments. Zinc, copper, lead and cadmium contents were much higher than those measured 15 years ago. The unusually high concentrations of heavy metals, high enrichment factors and their rapid increases with time in Pb-210 dated core showed that the efforts in heavy metal reduction were futile. A proper regulation to prevent further heavy metals from entering into the river is urgently needed.     

Heavy metal in sediments of Ziya River in northern China: distribution,potential risks,and source apportionment

The concentration partitioning between the sediment particle and the interstitial water phase plays an important role in controlling the toxicity of heavy metals in aquatic systems. The aim of this study was to assess the sediment quality in a polluted area of the Ziya River, Northern China. The contamination potential and bioavailability of six metals were determined from the concentrations of total metals and the bioavailable fractions. The results showed that the concentrations of Cr, Cu, Ni, Zn, and Pb exceeded the probable effect concentration at several sites. The high geoaccumulation indices showed that the sediments were seriously contaminated by Cd. The ratio of acid-volatile sulfide (AVS) to simultaneously extracted metal (SEM) was higher than 1, which indicated that the availability of metals in sediments was low. The risk assessment of interstitial waters confirmed that there was little chance of release of metals associated with acid-volatile sulfide into the water column. Values of the interstitial water criteria toxicity unit indicated that none of the concentrations of the studied metals exceeded the corresponding water quality thresholds of the US Environmental Protection Agency. Positive matrix factorization showed that the major sources of metals were related to anthropogenic activities. Further, if assessments are based on total heavy metal concentrations, the toxicity of heavy metals in sediment may be overestimated.     

Tissue-specific heavy metal (Cd, Pb, Cu, Zn) deposition in a natural population of the zebra mussel Dreissena polymorpha Pallas.

The zebra mussel Dreissena polymorpha was tested as an indicator of heavy metal exposure in urban waters of Vienna, Austria. Mussels, two sediment fractions, suspended matter, and filtrate were collected over one annual cycle at five sampling stations. Dreissena was dissected into five body parts: viscera, gill, foot, byssus, and shell, to determine tissue-specific metal accumulation. Cadmium, lead, copper, and zinc were measured by AAS. There was no clear relationship between (relatively low) metal concentrations in ambient compartments and in zebra mussel bodies. Therefore, D. polymorpha must be regarded as a poor suitable indicator tool under near-background contamination situations. Tissue-specific metal accumulation showed that cadmium was mainly stored in soft body parts. Lead, copper, and zinc showed significantly highest concentrations in the byssal threads. Metal concentrations and distribution patterns within the mussel's body must be interpreted as a result of (unknown) internal metal treatment/regulation. Excretion of lead, copper, and zinc via the byssus complex probably is an effective strategy for preventing toxic injury in D. polymorpha.     

Concentration, size distribution, and dry deposition rate of particle-associated metals in the Los Angeles region

Daily averaged atmospheric concentrations and dry deposition fluxes of particulate metals were measured seasonally at six urban sites and one non-urban coastal site in the Los Angeles region using a conventional total suspended particulate matter (TSP) filter, surrogate surface deposition plates, and a Noll Rotary Impactor (NRI), which provides information about particle size distribution in four size ranges above 6 μm. With the exception of the non-urban site, particulate metal concentrations and deposition fluxes were remarkably uniform spatially and temporally. At all sites there were significant metal concentrations on particles greater than 10 μm, a commonly used upper limit for many air quality monitoring studies, and these large particles were estimated to be responsible for most of the deposited mass of metals. Annual averaged values of deposition rates measured with a surrogate surface were in good agreement with values estimated using theoretical deposition velocities in conjunction with measured size-segregated particle concentrations. Image analysis of particles deposited on NRI stage A, which collects all particles greater than 6 μm, indicated nighttime metal concentrations and deposition at the non-urban coastal site was higher than in the day time due to offshore advection of urban air associated with the diurnal land breeze. Measured enrichments of crustal elements and metals were correlated, indicating efficient mixing of natural and anthropogenic material from different sources, hypothesized to be the result of cyclical resuspension and deposition of dust by moving vehicles and wind.     

Heavy metals and Pb isotopic composition of aerosols in urban and suburban areas of Hong Kong and Guangzhou,South China—Evidence of the long-range transport of air contaminants

Rapid urbanization and industrialization in South China has placed great strain on the environment and on human health. In the present study, the total suspended particulate matter (TSP) in the urban and suburban areas of Hong Kong and Guangzhou, the two largest urban centres in South China, was sampled from December 2003 to January 2005. The samples were analysed for the concentrations of major elements (Al, Fe, Mg and Mn) and trace metals (Cd, Cr, Cu, Pb, V and Zn), and for Pb isotopic composition. Elevated concentrations of metals, especially Cd, Pb, V and Zn, were observed in the urban and suburban areas of Guangzhou, showing significant atmospheric trace element pollution. Distinct seasonal patterns were observed in the heavy metal concentrations of aerosols in Hong Kong, with higher metal concentrations during the winter monsoon period, and lower concentrations during summertime. The seasonal variations in the metal concentrations of the aerosols in Guangzhou were less distinct, suggesting the dominance of local sources of pollution around the city. The Pb isotopic composition in the aerosols of Hong Kong had higher ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁷Pb ratios in winter, showing the influence of Pb from the northern inland areas of China and the Pearl River Delta (PRD) region, and lower ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁷Pb ratios in summer, indicating the influence of Pb from the South Asian region and from marine sources. The back trajectory analysis showed that the enrichment of heavy metals in Hong Kong and Guangzhou was closely associated with the air mass from the north and northeast that originated from northern China, reflecting the long-range transport of heavy metal contaminants from the northern inland areas of China to the South China coast.     

Research progress of heavy metals in desert—visual analysis based on CiteSpace

In this paper, Web of Science (a database) is used to retrieve related literature in the field of heavy metal pollution in desert. CiteSpace is used to make a quantitative and qualitative evaluation on the literature in the field on the basis of a brief analysis on the research status, research focus, and evolution process in the field. Through CiteSpace visual analysis, a comparative analysis is given on related literature in terms of annual number of published papers, author groups, and their countries and regions, journals, publishing institutions, highly cited papers, research focuses, and burst terms, so as to explore the research status and future development trend of the field on a global scale. The results are shown as follows: (1) The literature in the field was originally published in 2000; the number of published papers increased steadily. The literature was mostly published on high-quality journals, the USA topped in terms of the number of published papers, and the research results achieved by developed countries had a greater influence. Chinese Acad Sci topped with the highest centrality and most published papers, which have made outstanding contributions to the field and occupy a leading position in the field. However, the fact is that there lacks communication and cooperation among research institutions. The most influential journal is Science of the Total Environment. (2) The hot research words in the field are as follows: heavy metal, soil, pollution, lead, desert, cadmium, and microelement. (3) In the field, burst terms have transformed from atmospheric deposition, biomonitoring, and phytoremediation to trace element, stream sediment, street dust, and water quality, and finally transformed to river and sediment. New words keep emerging in the research, and more and more attention is paid to the issue of heavy metal pollution in river sediment, which will be a future research hotspot in the field.

     

pH值对霞湾港沉积物重金属Zn、Cu释放的影响

以霞湾港(铜霞路段)的底泥沉积物为研究对象,采用重金属连续浸提法对重金属Zn、Cu在沉积物中的5种形态进行浸提,分析了其分布特征和在不同pH值与时间的条件下重金属的释放规律。研究结果表明,重金属Zn主要以铁锰氧化物结合态和碳酸盐结合态的形态存在,Cu主要以有机结合态和残渣态的形态存在,可交换离子态的重金属含量都很低。重金属Zn、Cu从沉积物中的释放,主要是在酸性条件下发生,在酸性区内释放量随pH的升高而迅速降低。释放能力和释放速率均为ZnCu,它们释放的过程基本相似,释放速率都比较小,向环境中的释放是个长期过程。     

Heavy metals from the River Adayar,India: infiltration into the adjacent groundwater aquifer

In the Adayar riverbed and its estuary 5 undisturbed sediment cores were drilled using a petrol-driven hammer. Cores of a depth of 4-5 m were sampled in 0.5 m steps. The distribution of heavy metals (Cr, Mn, Ni, Cu, Zn, Cd and Pb) in the top layers of fluvial and estuarine sediments indicates recent anthropogenic input: Revealing that the river acts as a sink for drainage from the residential and industrial zones. In this study, the mobilization of heavy metals into greater depths and their probable effects on the groundwater body are discussed. The high concentration of heavy metals and the influent character of the river Adayar allow the mobilization of metal ions and their transport into the deeper layers of the sediment. A changing environment due to effects such as saltwater intrusion and monsoon floods is the driving force for this phenomenon.     

Ecological risk assessment of heavy metals in sediment and human health risk assessment of heavy metals in fishes in the middle and lower reaches of the Yangtze River basin

The concentrations of heavy metals (Cr, Cd, Hg, Cu, Zn, Pb and As) in the water, sediment, and fish were investigated in the middle and lower reaches of the Yangtze River, China. Potential ecological risk analysis of sediment heavy metal concentrations indicated that six sites in the middle reach, half of the sites in the lower reach, and two sites in lakes, posed moderate or considerable ecological risk. Health risk analysis of individual heavy metals in fish tissue indicated safe levels for the general population and for fisherman but, in combination, there was a possible risk in terms of total target hazard quotients. Correlation analysis and PCA found that heavy metals (Hg, Cd, Pb, Cr, Cu, and Zn) may be mainly derived from metal processing, electroplating industries, industrial wastewater, and domestic sewage. Hg may also originate from coal combustion. Significant positive correlations between TN and As were observed.     

Sorption of copper, zinc and lead on soil mineral phases

Soil mineral phases play a significant role in controlling heavy metal mobility in soils. The effective study of their relation needs the integrated use of several analytical methods. In this study, analytical electron microscopy analyses were combined with sequential chemical extractions on soils spiked with Cu, Zn and Pb. Our aims were to study the metal sorption capacity of soil mineral phases and the effect of presence of iron oxide and carbonate on this property of soil minerals. Copper and Pb were found to be characterized by higher and stronger sorption on the studied samples than Zn. Only the former two metals showed significant differences in their immobilized metal amounts on the studied samples and soil mineral particles. Highest metal amounts were sorbed on the swelling clay mineral particles (smectites and vermiculites), but iron-oxide phases may also have similar lead sorption capacity. Alkaline conditions due to the carbonate content of soils resulted both in increased sorption on the mineral particles for Cu and in enhanced role of precipitation for all the studied metals. On the other hand, the intimate association of phyllosilicates and iron resulted in significant increase in metal sorption capacity of the given particle. The results of sequential extractions could be successfully completed by the analytical electron microscopy analyses for studying the sorption capacity of discrete mineral particles. Their integrated use helps us in better understanding the heavy metal-mineral interactions in soils.