Atmospheric emissions of F,As, Se,Hg, and Sb from coal-fired power and heat generation in China

Coal is one of the major energy resources in China, with nearly half of produced Chinese coal used for power and heat generation. The large use of coal for power and heat generation in China may result in significant atmospheric emissions of toxic volatile trace elements (i.e. F, As, Se, Hg, and Sb). For the purpose of estimating the atmospheric emissions from coal-fired power and heat generation in China, a simple method based on coal consumption, concentration and emission factor of trace element was adopted to calculate the gaseous emissions of elements F, As, Se, Hg, and Sb. Results indicate that about 162 161, 236, 637, 172, and 33 t F, As, Se, Hg, and Sb, respectively, were introduced into atmosphere from coal combustion by power and heat generation in China in 2009. The atmospheric emissions of F, As, Se, Hg, and Sb by power and heat generation increased from 2005 to 2009 with increasing coal consumptions.     

The reduction of dioxin emissions from the processes of heat and power generation

The first reports that it is possible to emit dioxins from the heat and power generation sector are from the beginning of the 1980s. Detailed research proved that the emission of dioxins might occur during combustion of hard coal, brown coal, and furnace oil as well as coke-oven gas. The emission of dioxins occurs in wood incineration; wood that is clean and understood as biomass; or, in particular, wood waste (polluted). This paper thoroughly discusses the mechanism of dioxin formation in thermal processes, first and foremost in combustion processes. The parameters influencing the quantity of dioxins formed and the dependence of their quantity on the conditions of combustion are highlighted. Furthermore, the methods of reducing dioxin emissions from combustion processes (primary and secondary) are discussed. The most efficacious methods that may find application in the heat and power generation sector are proposed; this is relevant from the point of view of the implementation of the Stockholm Convention resolutions in Poland with regard to persistent organic pollutants.     

Assessment and Distribution of Antimony in Soils around Three Coal Mines,Anhui, China

ABSTRACT

Thirty-three soil samples were collected from the Luling, Liuer, and Zhangji coal mines in the Huaibei and Huainan areas of Anhui Province, China. The samples were analyzed for antimony (Sb) by inductively coupled plasma-optical emission spectrometry (ICP-OES) method. The average Sb content in the 33 samples was 4 mg kg^?1, which is lower than in coals from this region (6.2 mg kg^?1). More than 75% of the soils sampled showed a significant degree of Sb pollution (enrichment factors [EFs] 5–20). The soils collected near the gob pile and coal preparation plant were higher in Sb content than those collected from residential areas near the mines. The gob pile and tailings from the preparation plant were high in mineral matter content and high in Sb. They are the sources of Sb pollution in surface soils in the vicinity of coal mines. The spatial dispersion of Sb in surface soil in the mine region shows that Sb pollution could reach out as far as 350 m into the local environment conditions. Crops in rice paddies may adsorb some Sb and reduce the Sb content in soils from paddyfields. Vertical distribution of Sb in two soil profiles indicates that Sb is normally relatively immobile in soils.

IMPLICATIONS This work was carried out to analyze the pollution situation and environmental distribution of Sb in three important mines in Anhui Province of China. A detailed concentration analysis of Sb was used to indicate the anthropogenic source of human operation such as coal mining and depositing, coal cleaning, and electricity generation by coal power plants in the mine region. The investigation provides special useful information on the environmental behavior characteristics of Sb for environmental scientists and policy-makers.     

Anthropogenic mercury emissions in China

An inventory of mercury emissions from anthropogenic activities in China is compiled for the year 1999 from official statistical data. We estimate that China's emissions were 536 (±236) t of total mercury. This value includes open biomass burning, but does not include natural sources or re-emission of previously deposited mercury. Approximately 45% of the Hg comes from non-ferrous metals smelting, 38% from coal combustion, and 17% from miscellaneous activities, of which battery and fluorescent lamp production and cement production are the largest. Emissions are heaviest in Liaoning and Guangdong Provinces, where extensive smelting occurs, and in Guizhou Province, where there is much small-scale combustion of high-Hg coal without emission control devices. Emissions are gridded at 30×30 min spatial resolution. We estimate that 56% of the Hg in China is released as Hg⁰, 32% as Hg²⁺, and 12% as Hg^p. Particulate mercury emissions are high in China due to heavy burning of coal in residential and small industrial settings without PM controls. Emissions of Hg²⁺ from coal-fired power plants are high due to the absence of flue-gas desulfurization units, which tend to dissolve the soluble divalent mercury. Metals smelting operations favor the production of elemental mercury. Much of the Hg is released from small-scale activities in rather remote areas, and therefore the activity levels are quite uncertain. Also, emissions test data for Chinese sources are lacking, causing uncertainties in Hg emission factors and removal efficiencies. Overall, we calculate an uncertainty level of ±44% (95% confidence interval) in the estimate of total emissions. We recommend field testing of coal combustors and smelters in China to improve the accuracy of these estimates.     

Assessment and distribution of antimony in soils around three coal mines, Anhui, China

Thirty-three soil samples were collected from the Luling, Liuer, and Zhangji coal mines in the Huaibei and Huainan areas of Anhui Province, China. The samples were analyzed for antimony (Sb) by inductively coupled plasma-optical emission spectrometry (ICP-OES) method. The average Sb content in the 33 samples was 4 mg kg(-1), which is lower than in coals from this region (6.2 mg kg(-1)). More than 75% of the soils sampled showed a significant degree of Sb pollution (enrichment factors [EFs] 5-20). The soils collected near the gob pile and coal preparation plant were higher in Sb content than those collected from residential areas near the mines. The gob pile and tailings from the preparation plant were high in mineral matter content and high in Sb. They are the sources of Sb pollution in surface soils in the vicinity of coal mines. The spatial dispersion of Sb in surface soil in the mine region shows that Sb pollution could reach out as far as 350 m into the local environment conditions. Crops in rice paddies may adsorb some Sb and reduce the Sb content in soils from paddyfields. Vertical distribution of Sb in two soil profiles indicates that Sb is normally relatively immobile in soils.     

Status and Environmental Impact of Emissions from Thermal Power Plants in India

The main emissions from coal combustion at thermal power plants are carbon dioxide (CO₂), nitrogen oxides, sulfur oxides, chlorofluorocarbons (CFCs), and airborne inorganic particles such as fly ash and soot; CO₂, methane, and CFCs are greenhouse gases. These emissions are considered to be partially responsible for harmful global climate change. This review summarizes the status of thermal power plants in India and their various types of emissions that directly or indirectly produce harmful effects on the environment and human health. Moreover, it focuses on various types of preventive measures used to avoid/minimize emissions.     

Black carbon emissions in China

Black carbon (BC) is an important aerosol species because of its global and regional influence on radiative forcing and its local effects on the environment and human health. We have estimated the emissions of BC in China, where roughly one-fourth of global anthropogenic emissions is believed to originate. China's high rates of usage of coal and biofuels are primarily responsible for high BC emissions. This paper pays particular attention to the application of appropriate emission factors for China and the attenuation of these emissions where control devices are used. Nevertheless, because of the high degree of uncertainty associated with BC emission factors, we provide ranges of uncertainty for our emission estimates, which are approximately a factor of eight. In our central case, we calculate that BC emissions in China in 1995 were 1342 Gg, about 83% being generated by the residential combustion of coal and biofuels. We estimate that BC emissions could fall to 1224 Gg by 2020. This 9% decrease in BC emissions can be contrasted with the expected increase of 50% in energy use; the reduction will be obtained because of a transition to more advanced technology, including greater use of coal briquettes in place of raw coal in cities and towns. The increased use of diesel vehicles in the future will result in a greater share of the transport sector in total BC emissions. Spatially, BC emissions are predominantly distributed in an east–west swath across China's heartland, where the rural use of coal and biofuels for cooking and heating is widespread. This is in contrast to the emissions of most other anthropogenically derived air pollutants, which are closely tied to population and industrial centers.     

北京市燃煤的空气质量影响及其控制研究

建立了2005年北京市燃煤污染源排放清单,利用MM5-CMAQ模型计算了各区县各行业燃煤对北京市空气质量的影响。研究表明,2005年1月北京市燃煤源对各监测站点SO_2浓度的贡献在70%以上,对PM_(10)和NO_x浓度的贡献约为20%～40%和10%～30%;7月本地燃煤源对SO_2浓度的贡献在40%～50%左右。1月采暖锅炉对空气质量影响最大,占50%～70%;7月电厂的影响最大。依据北京市奥运空气质量保障方案以及"十一五"期间能源规划,建立了2010年燃煤污染源大气排放的规划情景,并模拟了各规划措施对大气质量的改善效果。通过实施电厂脱硫脱硝除尘、炼焦工业停产、钢铁行业和水泥行业搬迁减产、供热锅炉改造、平房用煤改造等措施,与2005年相比,SO_2平均浓度下降30%左右,NO_x和PM_(10)浓度的下降幅度15%。     

Sulfur dioxide and nitrogen oxides emissions from U.S. pulp and paper mills, 1980-2005

Comprehensive surveys conducted at 5-yr intervals were used to estimate sulfur dioxide (SO,) and nitrogen oxides (NO.) emissions from U.S. pulp and paper mills for 1980, 1985, 1990, 1995, 2000, and 2005. Over the 25-yr period, paper production increased by 50%, whereas total SO, emissions declined by 60% to 340,000 short tons (t) and total NO, emissions decreased approximately 15% to 230,000 t. The downward emission trends resulted from a combination of factors, including reductions in oil and coal use, steadily declining fuel sulfur content, lower pulp and paper production in recent years, increased use of flue gas desulfurization systems on boilers, growing use of combustion modifications and add-on control systems to reduce boiler and gas turbine NO, emissions, and improvements in kraft recovery furnace operations.     

我国氮氧化物排放因子的修正和排放量计算:2000年

根据我国城市的发展状况 ,采用城市分类的方法 ,将我国 2 6 1个地级市按照人口数量分为 5个类别。每类城市选取一个典型城市进行实地调查 ,对我国燃烧锅炉和机动车的NOx 的排放因子进行了修正 ,提出了适合我国目前排放水平的各类城市的固定源和移动源的排放因子。并依据 2 0 0 0年中国大陆地区的电站锅炉、工业锅炉和民用炉具的燃料消耗量和机动车保有量 ,以地级市为基本单位 ,估算了 2 0 0 0年我国各地区的NOx 排放量 ,分析了分地区、分行业、分燃料类型的NOx 排放特征。 2 0 0 0年我国NOx 排放总量为 11.12Mt,其中固定源占 6 0 .8% ;移动源占 39.2 %。NOx 排放在地域、行业和燃料类型上分布均不平衡。NOx 的排放主要集中在华东和华北地区 ,其排放量占全国排放量的一半以上。燃煤为最重要的NOx 排放源 ,其排放量占燃料型NOx 排放量的 72 .3%左右。     

Evaluation of mercury emissions to the atmosphere from coal combustion,China

Mercury emissions from the coal smoke is the main source of anthropogenic discharge and mercury pollution in atmosphere. The calculated total amount of mercury emissions of China in 1995 is approximately 213.8 tonnes, which accounts for c. 5% of estimated total global discharge of 4000 tonnes in the same period. From 1978 to 1995, total coal consumption increased fourfold. Based on these data it is estimated that the mercury emissions will increase at a rate of 5% a year, and the predicted emissions will be 273 tonnes in China in 2000. Controlling and solving mercury emissions from coal combustion are among the most important environmental tasks facing China.     

Sulfur Dioxide and Nitrogen Oxides Emissions from U.S. Pulp and Paper Mills, 1980–2005

Abstract

Comprehensive surveys conducted at 5-yr intervals were used to estimate sulfur dioxide (SO₂) and nitrogen oxides (NO_x) emissions from U.S. pulp and paper mills for 1980, 1985, 1990, 1995, 2000, and 2005. Over the 25-yr period, paper production increased by 50%, whereas total SO₂ emissions declined by 60% to 340,000 short tons (t) and total NO_x emissions decreased approximately 15% to 230,000 t. The downward emission trends resulted from a combination of factors, including reductions in oil and coal use, steadily declining fuel sulfur content, lower pulp and paper production in recent years, increased use of flue gas desulfurization systems on boilers, growing use of combustion modifications and add-on control systems to reduce boiler and gas turbine NO_x emissions, and improvements in kraft recovery furnace operations.     

Control strategies of atmospheric mercury emissions from coal-fired power plants in China

Atmospheric mercury (Hg) emission from coal is one of the primary sources of anthropogenic discharge and pollution. China is one of the few countries in the world whose coal consumption constitutes about 70% of total primary energy, and over half of coals are burned directly for electricity generation. Atmospheric emissions of Hg and its speciation from coal-fired power plants are of great concern owing to their negative impacts on regional human health and ecosystem risks, as well as long-distance transport. In this paper, recent trends of atmospheric Hg emissions and its species split from coal-fired power plants in China during the period of 2000-2007 are evaluated, by integrating each plant's coal consumption and emission factors, which are classified by different subcategories of boilers, particulate matter (PM) and sulfur dioxide (SO2) control devices. Our results show that the total Hg emissions from coal-fired power plants have begun to decrease from the peak value of 139.19 t in 2005 to 134.55 t in 2007, though coal consumption growing steadily from 1213.8 to 1532.4 Mt, which can be mainly attributed to the co-benefit Hg reduction by electrostatic precipitators/fabric filters (ESPs/FFs) and wet flue gas desulfurization (WFGD), especially the sharp growth in installation of WFGD both in the new and existing power plants since 2005. In the coming 12th five-year-plan, more and more plants will be mandated to install De-NO(x) (nitrogen oxides) systems (mainly selective catalytic reduction [SCR] and selective noncatalytic reduction [SNCR]) for minimizing NO(x) emission, thus the specific Hg emission rate per ton of coal will decline further owing to the much higher co-benefit removal efficiency by the combination of SCR + ESPs/FFs + WFGD systems. Consequently, SCR + ESPs/FFs + WFGD configuration will be the main path to abate Hg discharge from coal-fired power plants in China in the near future. However advanced specific Hg removal technologies are necessary for further reduction of elemental Hg discharge in the long-term.     

Distribution of volatile organic compounds during the combustion process in coal-fired power stations

This study concerns the distribution of volatile organic compounds (VOC) emitted during combustion processes in coal-fired power stations. Thermal desorption technique was employed to analyse VOC concentrations in gaseous emissions (trapped onto Carbotrap B sorbent) and solid samples (coal, fly ash and slag). An empirical parameter (Y) was employed to evaluate the relationships between the compounds emitted during a real combustion process and those obtained in coal analysis by thermal desorption. The Y calculation does not provide any information about VOC emissions through solid effluents as fly ash or slag. A comparison method was created for this purpose. The results obtained using this method confirm that combustion is almost complete for aromatic and aliphatic hydrocarbons. Chlorinated compounds are mainly formed during the combustion.     

Atmospheric emissions of mercury from Australian point sources

The UN Global Mercury Assessment (GMA) estimates that atmospheric emissions of mercury from Australian stationary combustion sources were 97.0 tonnes for the year of 1995. This is more than 90% of the estimated emissions from stationary combustion for the whole of North America, and seems abnormally high for a country with a population of around 20 million, in spite of the fact that most of Australia's stationary energy supply is provided by coal. It is also significantly larger than previous estimates of mercury emissions from Australian sources. New estimates of Australian mercury emissions from stationary energy sources, based on both a top down and bottom up approach, are presented. These estimates can be reconciled for black coal fired power stations, but suggest that the bottom up approach (the Australian National Pollutant Inventory) significantly under-estimates emissions from brown coal fired plant, if mercury capture efficiencies in these plants are low, as observed for lignite-fired plant. The major uncertainties in these estimates are the coal mercury content in coals burnt in Australian power stations, and the mercury capture efficiency in particulate control devices used at these stations. Based on these estimates, Australian emissions of mercury from stationary energy are currently 2–8 tonnes/year, significantly lower than the GMA estimate.     

Spatial and temporal distribution of polycyclic aromatic hydrocarbons (PAHs) in sediments from Daya Bay, South China

The spatial and temporal distribution of polycyclic aromatic hydrocarbons (PAHs) has been investigated in Daya Bay, China. The total concentration of the 16 USEPA priority PAHs in surface sediments ranged from 42.5 to 158.2 ng/g dry weight with a mean concentration of 126.2 ng/g. The spatial distribution of PAHs was site-specific and combustion processes were the main source of PAHs in the surface sediments. Total 16 priority PAH concentration in the cores 8 and 10 ranged from 77.4 to 305.7 ng/g and from 118.1 to 319.9 ng/g respectively. The variation of the 16 PAH concentrations in both cores followed the economic development in China very well and was also influenced by input pathways. Some of the PAHs were petrogenic in core 8 while pyrolytic source was dominant in core 10. In addition, pyrolytic PAHs in both cores were mainly from the coal and/or grass and wood combustion.     

Trends in hazardous trace metal concentrations in aerosols collected in Beijing, China from 2001 to 2006

Daily observations of hazardous trace metal concentrations in aerosols in Beijing, China were made in the period from 2001 to 2006. We considered coal combustion as a major source of some anthropogenic metals by achieving a correlation analysis and by investigating enrichment factors and relative composition of metals. A possible extra source of some specific metals, such as Cu and Sb, was brake abrasion particles, however, we did not think the transport-related particle was a major source for the hazardous anthropogenic metals even though they could originate from vehicle exhaust and brake/tire abrasion particles. A time-trend model was used to describe temporal variations of chemical constituent concentrations during the five-year period. Several crustal elements, such as Al, Ti, V, Cr, Mn, Fe, and Co, did not show clear increases, with annual rates of change of -15.2% to 3.6%. On the other hand, serious increasing trends were noted from several hazardous trace metals. Cu, Zn, As, Cd, and Pb, which are derived mainly from anthropogenic sources, such as coal combustion, showed higher annual rate of change (4.9-19.8%, p<0.001) according to the regression model. In particular, the Cd and Pb concentrations increased remarkably. We hypothesize that the trend towards increasing concentrations of metals in the air reflects a change that has occurred in the process of burning coal, whereby the use of higher temperatures for coal combustion has resulted in increased emissions of these metals. The increasing use of low-rank coal may also explain the observed trends. In addition, nonferrous metal smelters are considered as a potential, albeit minor, reason for the increasing atmospheric concentrations of anthropogenic hazardous metals in Beijing city.     

A New Method to Assess Mercury Emissions: A Study of Three Coal-Fired Electric-Generating Power Station Configurations

Abstract

U.S. Environmental Protection Agency (EPA) Method 7473 for the analysis of mercury (Hg) by thermal decomposition, amalgamation, and atomic absorption spectroscopy has proved successful for use in Hg assessment at coal-fired power stations. In an analysis time of ～5 min per sample, this instrumental methodology can directly analyze total Hg—with no discrete sample preparation—in the solid matrices associated with a coal-fired power plant, including coal, fly ash, bottom ash, and flue gas desulfurization (FGD) material. This analysis technique was used to investigate Hg capture by coal combustion byproducts (CCBs) in three different coal-fired power plant configurations. Hg capture and associated emissions were estimated by partial mass balance. The station equipped with an FGD system demonstrated 68% capture on FGD material and an emissions estimate of 18% (11 kg/yr) of total Hg input. The power plant equipped with low oxides of nitrogen burners and an electrostatic precipitator (ESP) retained 43% on the fly ash and emitted 57% (51 kg/yr). The station equipped with conventional burners and an ESP retained less than 1% on the fly ash, emitting an estimated 99% (88 kg/yr) of Hg. Estimated Hg emissions demonstrate good agreement with EPA data for the power stations investigated.     

Isotopes as tracers of sources of lead and strontium in aerosols (TSP & PM2.5) in Beijing

Even after its being phased out in gasoline in the late 90s, lead (Pb) is still present at relatively high levels in the atmosphere of Beijing, China (0.10–0.18 μg m^?3). Its origin is subject to debate as several distinct sources may contribute to the observed pollution levels. This study proposes to constrain the origin(s) of Pb and strontium (Sr) in aerosols, by coupling both Pb and Sr isotope systematics. The characterisation of the main pollution sources (road traffic, smelters, metal refining plants, coal combustion, cement factories, and soil erosion) shows that they can unambiguously be discriminated by the multi-isotope approach (²⁰⁶Pb/²⁰⁴Pb and ⁸⁷Sr/⁸⁶Sr). The study of total suspended particulates (TSP) and fine particles (PM_2.5) from Beijing and its vicinity indicates that both size fractions are controlled by the same sources. Lead isotopes indicate that metal refining plants are the major source of atmospheric lead, followed by thermal power stations and other coal combustion processes. The role of this latter source is confirmed by the study of strontium isotopes. Occasionally, emissions from cement plants and/or input from soil alteration are isotopically detectable.     

Environmental and economic evaluation of bioenergy in Ontario, Canada

We examined life cycle environmental and economic implications of two near-term scenarios for converting cellulosic biomass to energy, generating electricity from cofiring biomass in existing coal power plants, and producing ethanol from biomass in stand-alone facilities in Ontario, Canada. The study inventories near-term biomass supply in the province, quantifies environmental metrics associated with the use of agricultural residues for producing electricity and ethanol, determines the incremental costs of switching from fossil fuels to biomass, and compares the cost-effectiveness of greenhouse gas (GHG) and air pollutant emissions abatement achieved through the use of the bioenergy. Implementing a biomass cofiring rate of 10% in existing coal-fired power plants would reduce annual GHG emissions by 2.3 million metric tons (t) of CO2 equivalent (7% of the province's coal power plant emissions). The substitution of gasoline with ethanol/gasoline blends would reduce annual provincial lightduty vehicle fleet emissions between 1.3 and 2.5 million t of CO2 equivalent (3.5-7% of fleet emissions). If biomass sources other than agricultural residues were used, additional emissions reductions could be realized. At current crude oil prices ($70/barrel) and levels of technology development of the bioenergy alternatives, the biomass electricity cofiring scenario analyzed is more cost-effective for mitigating GHG emissions ($22/t of CO2 equivalent for a 10% cofiring rate) than the stand-alone ethanol production scenario ($92/t of CO2 equivalent). The economics of biomass cofiring benefits from existing capital, whereas the cellulosic ethanol scenario does not. Notwithstanding this result, there are several factors that increase the attractiveness of ethanol. These include uncertainty in crude oil prices, potential for marked improvements in cellulosic ethanol technology and economics, the province's commitment to 5% ethanol content in gasoline, the possibility of ethanol production benefiting from existing capital, and there being few alternatives for moderate-to-large-scale GHG emissions reductions in the transportation sector.