The MMT bag for emission source sampling: design and evaluation

This paper presents the design and evaluation results for a metal-coated multilayer Tedlar (MMT) bag that was developed for the collection of source emissions. The applicability of the MMT bag was evaluated for a number of important greenhouse relevant gases: CO, CO2, CH4, N2O, and total hydrocarbons (THCs). The bag was tested for durability and stability for a range of concentrations of the tested compounds using both laboratory-prepared samples and real source samples. The results show that all tested compounds were more stable when stored in the MMT bag than when stored in a regular Tedlar bag. These compounds can be stored at room temperature for at least 3 months without significant changes in concentration. When properly packed, the MMT bag is durable and may be shipped by air. The MMT bag is lower in cost, lighter in weight, and easier to clean, and it requires less devices during the subsequent laboratory analysis compared with a stainless steel canister, which is often used to collect air and source samples.     

Ambient Air Measurements of Petroleum Refinery Emissions

An ambient air monitoring program to characterize airborne emissions from the Exxon petroleum refinery at Benicia, California was conducted during September 8–22, 1975. Ground level sampling facilities and an instrumented aircraft provided an integrated, three-dimensional monitoring network. Measurements made during the study included ozone, oxides of nitrogen, methane, carbon monoxide, individual C₂-C₆ hydrocarbons, halocarbons, condensation nuclei, visual distance and various meteorological parameters. The study focused on three major areas: (1) the characterization of gaseous components within the refinery effluent, especially non-methane hydrocarbons and ozone, (2) natural sunlight bag irradiation experiments to determine the ozone forming potential of refinery emissions, and (3) an investigation of changes in plume chemistry as refinery emissions were transported downwind.     

Active biomonitoring of polycyclic aromatic hydrocarbons by means of mosses

Spherical bags, packed with 20 g of peat moss (Sphagnum spp.), were exposed to ambient air at a distance of 1 km from a plant manufacturing electrodes for the production of aluminium, near Rotterdam, The Netherlands. In these bags, the concentrations of six polycyclic aromatic hydrocarbons were determined, and compared with the concentrations in moss bags that had been exposed in relatively clean areas. From the results it can be concluded that, in addition to their useful application for biomonitoring of heavy metals, mosses can be applied in active biomonitoring of polycyclic aromatic hydrocarbons in ambient air.     

Odor concentration decay and stability in gas sampling bags

This paper presents results of an experimental study into factors contributing to decay of odor samples during storage, between 4 and 40 hr after sample collection. The odor studied was sampled from a tobacco processing plant as part of collaborative research with a view to establishing a manual outlining methods for odor annoyance management, specifically for the tobacco industry. In August and September 1997, an experimental program was carried out in which two types of tobacco odor were sampled: Burley Toaster and Mix. The dependent variable was odor concentration in the bag, measured by dynamic olfactometry in accordance with the draft Comité Européen de Normalisation (CEN) standard EN13725 "Air Quality-Determination of Odor Concentration by Dynamic Olfactometry." The independent variables were sampling bag material, degree of dilution during sampling, dilution gas used, particle removal during sampling, and age of sample in hours. In the first phase, 94 odor analyses were carried out. In a second test, 32 samples were analyzed for odor concentration. In addition, 16 samples were analyzed using gas chromatography-mass spectrometry (GC-MS). Analysis of the results (analysis of variance) led to the unexpected conclusion that Nalophan film bags performed significantly better than metalized Cali-Bond layered film as a bag material. The odor concentration of samples in Nalophan bags remained relatively stable between 4 and 12 hr after sampling. After 30 hr, decay to about half the initial concentration, as measured at 4 hr, was observed. Particle removal during sampling caused the odor concentration in the bags to be reduced by approximately 20%. For practical reasons, particle removal remains useful, to avoid contamination of equipment. Using air or nitrogen as the neutral gas for pre-dilution during sampling or the dilution factor used (between factor 2 and 6) did not appear to have an effect on the decay characteristic of odor samples. The following recommendations are suggested for the practice of collecting odor samples and apply specifically to tobacco processing emissions: Analyze samples as soon as possible, preferably within 12 hr; When samples age for more than 12 hr, decay is likely to cause a reduction in odor concentration to half the original concentration at age 30 hr; Use sampling bags made of Nalophan NA or benchmark performance of other materials against Nalophan NA before using alternative materials; Use pre-dilution when sampling only for the purpose of avoiding condensation during sample storage. Use an appropriate minimum dilution factor to avoid condensation; Both nitrogen and high-purity (synthetic) air are suitable to use as neutral gas for pre-dilution; and When sampling tobacco odors, use an odorless filter to remove particles. This practice removes a source of variation and avoids contamination of equipment. The effect on results, despite being consistently lower in odor concentration, is not meaningful in terms of perceived intensity or annoyance potential.     

Prediction of Particulate Loading in Exhaust from Fabric Filter Baghouses with One or More Failed Bags

Abstract

Loss of filtration efficiency in a fabric filter baghouse is typically caused by bag failure, in one form or another. The degree of such failure can be as minor as a pinhole leak or as major as a fully involved baghouse fire. In some cases, local air pollution regulations or federal hazardous waste laws may require estimation of the total quantity of particulate matter released to the environment as a result of such failures. In this paper, a technique is presented for computing the dust loading in the baghouse exhaust when one or more bags have failed. The algorithm developed is shown to be an improvement over a previously published result, which requires empirical knowledge of the variation in baghouse pressure differential with bag failures. An example calculation is presented for a bag-house equipped with 200 bags. The prediction shows that a small percentage of failed bags can cause a relatively large proportion of the gas flow to bypass the active bags, which, in turn, leads to high outlet dust loading and low overall collection efficiency from the baghouse.     

Prediction of particulate loading in exhaust from fabric filter baghouses with one or more failed bags

Loss of filtration efficiency in a fabric filter baghouse is typically caused by bag failure, in one form or another. The degree of such failure can be as minor as a pinhole leak or as major as a fully involved baghouse fire. In some cases, local air pollution regulations or federal hazardous waste laws may require estimation of the total quantity of particulate matter released to the environment as a result of such failures. In this paper, a technique is presented for computing the dust loading in the baghouse exhaust when one or more bags have failed. The algorithm developed is shown to be an improvement over a previously published result, which requires empirical knowledge of the variation in baghouse pressure differential with bag failures. An example calculation is presented for a baghouse equipped with 200 bags. The prediction shows that a small percentage of failed bags can cause a relatively large proportion of the gas flow to bypass the active bags, which, in turn, leads to high outlet dust loading and low overall collection efficiency from the baghouse.     

Formation of Oxides of Nitrogen in Pulverized Coal Combustion

Nitrogen oxides are a potential atmospheric pollutant. Their formation and decomposition were studied in an experimental pulverized-coal-fired furnace. The concentration of nitrogen oxides (NO_x) was a maximum in the combustion zone and decreased as the combustion gas cooled. At a coal burning rate of 2 Ib/hr and 22% excess air, reduction of nitrogen oxides was obtained by selective secondary-air distribution. With 105% cf the stoichiometric air fed to the coal-combustion zone and 17% additional air fed just beyond the flame front, 62% reduction of NO_x occurred with good combustion efficiency. Lowering the quantity of excess air lowered the NO_x concentration, but at the expense of combustion efficiency. When 22% excess air was fed to the primary combustion zone, NO_x concentration in the effluent was 550 ppm and carbon in the fly ash 2.0%. With 5% excess air, the NO_x concentration fell to 210 ppm and carbon in the fly ash rose to 13.8%. With stoichiometric combustion the NO_x was 105 ppm a reduction of 81 %, and the carbon was 42.3%. Recirculation of combustion gas was not an effective means of lowering NO_x formation.     

Modeling toxic compounds from nitric oxide emission measurements

Determining the amount and rate of degradation of toxic pollutants in soil and groundwater is difficult and often requires invasive techniques, such as deploying extensive monitoring well networks. Even with these networks, degradation rates across entire systems cannot readily be extrapolated from the samples. When organic compounds are degraded by microbes, especially nitrifying bacteria, oxides or nitrogen (NO_x) are released to the atmosphere. Thus, the flux of nitric oxide (NO) from the soil to the lower troposphere can be used to predict the rate at which organic compounds are degraded. By characterizing and applying biogenic and anthropogenic processes in soils the rates of degradation of organic compounds. Toluene was selected as a representative of toxic aromatic compounds, since it is inherently toxic, it is a substituted benzene compound and is listed as a hazardous air pollutant under Section 12 of the Clean Air Act Amendments of 1990. Measured toluene concentrations in soil, microbial population growth and NO fluxes in chamber studies were used to develop and parameterize a numerical model based on carbon and nitrogen cycling. These measurements, in turn, were used as indicators of bioremediation of air toxic (i.e. toluene) concentrations. The model found that chemical concentration, soil microbial abundance, and NO production can be directly related to the experimental results (significant at P < 0.01) for all toluene concentrations tested. This indicates that the model may prove useful in monitoring and predicting the fate of toxic aromatic contaminants in a complex soil system. It may also be useful in predicting the release of ozone precursors, such as changes in reservoirs of hydrocarbons and oxides of nitrogen. As such, the model may be a tool for decision makers in ozone non-attainment areas.     

Thermal removal of PCDD/Fs from medical waste incineration fly ash--effect of temperature and nitrogen flow rate

The fly ash used in this study was collected from a bag filter in a medical waste rotary kiln incineration system, using lime and activated carbon injection followed by their collection as mixed fly ash. Experiments were conducted on fly ash in a quartz tube, heated in a laboratory-scale horizontal tube furnace, in order to study the effect of temperature and nitrogen flow rate on the removal of PCDD/Fs. Results indicated that in this study PCDD/Fs in the fly ash mostly were removed and desorbed very little into the flue gas under thermal treatment especially when the heating temperature was higher than 350 °C, and dechlorination and destruction reactions took important part in the removal of PCDD/Fs. However, in terms of flow rate, when flow rate was higher than 4 cm s⁻¹, destruction efficiency of PCDD/Fs decreased dramatically and the main contributors were P₅CDF, H₆CDF and H₇CDF desorbed to flue gas, the PCDD/Fs in the fly ash decreased with enhanced flow rate.     

A Regulatory Analysis

The information presented in this paper is directed to those individuals interested in future air quality control programs aimed at areas that are attaining one or more air quality ambient standards. Section 116 of the Clean Air Act, as amended, requires the Environmental Protection Agency to promulgate regulations for the prevention of significant deterioration (PSD) of air quality in order to protect the nation's clean air resources from hydrocarbons, carbon monoxide, ozone, nitrogen oxides, and lead (Set II pollutants). This program will affect industry siting in many areas of the country, particularly in the rural, undeveloped areas. Among the many alternatives currently being considered by EPA to meet the PSD Set II goals are emission management systems, marketable emission permits, air quality increments, emission fees, and control of transportation related sources. The final regulation may be a combination of several options or may present several alternatives from which a State would choose its specific program.     

滤袋数目对翼形上进风袋式除尘器内流场影响的数值模拟研究

针对实际运行过程中,袋式除尘器滤袋使用寿命短,压力损失过大的问题,本文以翼形上进风袋式除尘器为研究对象,采用CFD(computational fluid dynamics)技术模拟分析不同滤袋数(分别为92、88、84、80、76和72)时袋式除尘器内气流分布和压力损失规律。主要考察了流量分配系数、最大流量不均幅值、气流迹线、滤袋表面速度分布与压降等指标。结果表明,滤袋数为76个时,气流分布最为均匀,各滤袋负载均衡;相同过滤速度下,装置的压降随滤袋数目的增加而上升,即压降大小顺序为9288847672;与72个滤袋相比,76个滤袋的可用过滤面积更大。综合考虑,袋式除尘器的最优滤袋数目为76个。模拟结果为袋式除尘器的设计和优化提供了依据。     

Mechanism of Peroxyacetyl Nitrate Formation

It is proposed that peroxyacetyl nitrate and its homologues are formed in polluted air by a reaction between acylate (or aroylate) radicals and nitrogen trioxide. The proposed reaction accounts for the delayed formation of peroxyacetyl nitrate upon the irradiation of low concentrations of hydrocarbons and nitrogen oxides in air. It also explains why peroxyacetyl nitrate is not formed in photooxidations at high reactant concentrations. It accounts for the formation of peroxyacetyl nitrate in the dark reaction of acetaldehyde, oxygen, and N₂O₅; and, finally, it explains the inhibiting effect that excess NO₂ has on that dark reaction. The proposed reaction could yield either the accepted peroxyacetyl nitrate molecular structure or a molecular structure called acetyl pernitrate that does not include an oxygen-oxygen bond. The chemical properties of the molecule can be reconciled with either formulation.     

Comparison of on-road emissions for B-0, B-10, and B-20 in transit buses

Biodiesels are often marketed as being cleaner than regular diesel for emissions. Emission test results depend on the biodiesel blend, but laboratory tests suggest that biodiesels decrease particulate matter, carbon monoxide, hydrocarbons, and air toxins when compared to regular diesel. Results for the amount of oxides of nitrogen (NOx) have been less conclusive. Tests have also not evaluated the commonly available ranges of biodiesel blends in the laboratory. Additionally, little information is available from on-road studies, so the effectiveness of using biodiesels to reduce actual emissions is unknown. A more complex relationship exists between engine operation and the rate of emission production than is typically evaluated using engine or chassis dynamometer tests. On-road emissions can vary dramatically because emissions are correlated to engine mode. Additionally, activity such as idling, acceleration, deceleration, and operation against a grade can produce higher emissions than more stable engine operating modes. Because these modes are not well captured in a laboratory environment, understanding on-road relationships is critical in evaluating the emissions reductions that may be possible with biodiesels. More tests and quantifications of the effects of different blends on engine and vehicle performance are required to promote widespread use of biodiesel. The objective of this research was to conduct on-road tests to compare the emission impacts of different blends of biodiesel to regular diesel fuel under different operating conditions. The team conducted on-road tests that utilized a portable emissions monitoring system that was used to instrument transit buses. Regular diesel and different blends of biodiesel were evaluated during on-road engine operation by instrumenting three in-use transit buses, from the CyRide system of Ames, Iowa, along an existing transit route.     

Site Representativeness of Urban Air Monitoring Stations

Abstract

This paper describes a statistic to quantify spatial representativeness for the air measurements of an urban fixed-site ambient air monitoring station. The application of such a statistic of representativeness has also been successfully demonstrated by two data sets collected at the Gu-Ting monitoring station in Taipei. By measuring NO2 at 22 sites simultaneously around the Gu-Ting station, the statistic has characterized different degrees of spatial representativeness for nitrogen dioxide (NO2) at various areas and microenvironments surrounding this fixed-site monitoring station. By measuring ambient air concentrations at six sites sequentially around the Gu-Ting station, the statistic has also characterized different degrees of representativeness for particulates less than 10 urn in size—(PM10), carbon monoxide (CO), sulfur dioxide (SO2), ozone (O3), NO2, nitrogen oxides (NOX), nitrogen monoxide (NO), total hydrocarbons (THC), and nonmethane hydrocarbons (NMHQ—at an open area surrounding this fixed-site monitoring station. This statistical method identifies the Gu-Ting station is well representative of outdoor concentrations of all nine air pollutants for a period of three weeks at the areas within a 700 m radius around this station. The indoor NO2 concentrations, however, are not represented by the measurements at the fixed-site monitoring station.     

Contribution of Burning of Agricultural Wastes to Photochemical Air Pollution

Agricultural wastes from orchards, grain fields, and range lands are burned each year in California as the most practical means of ridding the land of these wastes. In order to determine the relative contribution of the burning of such material to photochemical air pollution, the effluent from 1 23 fires of known weights of range brush, both dry and green, barley and rice stubble, and prunings from various fruit and nut trees were monitored in a special tower which provided an open burning situation. Analyses were made for total hydrocarbon, expressed as C, by flame ionization detection, and for 24 individual hydrocarbons by gas chromatography, as well as for CO and CO₂ by infrared spectroscopy. A few analyses were made for oxides of nitrogen. These data, coupled with temperature and airflow measurements, allowed calculations to be made on pounds of effluent per ton of material burned and demonstrated that the emissions from agricultural burning are much less than those from the automobile, a principal source of such emissions.     

Chemistry of Atmospheric Oxidants

All of the important oxidants in polluted air are formed there by chemical reactions which occur among the primary pollutants. The most abundant of these oxidants is ozone which is formed in a cycle involving nitric oxide, nitrogen dioxide, atmospheric oxygen, and hydrocarbons. This ozone is best understood, not as a reaction product, but as an intermediate in steady-state concentration between formation and disappearance reactions. Hydrocarbons permit accumulation of ozone by reacting to scavenge the nitric oxide which would otherwise remove the ozone. The amount of ozone which can be formed in ambient polluted air is limited to about 1 ppm because these scavenging reactions become less effective when the nitric oxide concentration becomes very small. The peroxyacyl nitrates are a group of oxidants which result from reactions between oxides of nitrogen and organic pollutants. Olefinic and aromatic hydrocarbons make the largest contribution to PAN formation; saturates contribute little if any. The role of nitrogen dioxide and other oxidizing agents is also discussed.     

Calculating Air Quality and Its Control

Air quality is shown as a function of averaging times of five minutes to one year for carbon monoxide, hydrocarbons, nitric oxide, nitrogen dioxide, nitrogen oxides, oxidant, and sulfur dioxide in Chicago, Cincinnati, Los Angeles, New Orleans, Philadelphia, San Francisco, and Washington, D. C. Concentrations are approximately lognormally distributed for all pollutants in all cities for all averaging times. Maximum concentration is inversely proportional to averaging time to an exponent. The exponent is a function of the standard geometric deviation. General air quality and control parameters are derived and shown for one example, nitrogen oxides in Washington, D. C. These values are compared to one air quality standard.     

Transformations,Lifetimes, and Sources of NO2, HONO,and HNO3 in Indoor Environments

Recent research has demonstrated that nitrogen oxides are transformed to nitrogen acids in indoor environments, and that significant concentrations of nitrous acid are present in indoor air. The purpose of the study reported in this paper has been to investigate the sources, chemical transformations and lifetimes of nitrogen oxides and nitrogen acids under the conditions existing in buildings. An unoccupied single family residence was instrumented for monitoring of NO, NO₂, NO_y, MONO, HNO₃, CO, temperature, relative humidity, and air exchange rate. For some experiments, NO₂ and HONO were injected into the house to determine their removal rates and lifetimes. Other experiments investigated the emissions and transformations of nitrogen species from unvented natural gas appliances. We determined that HONO is formed by both direct emissions from combustion processes and reaction of NO₂ with surfaces present indoors. Equilibrium considerations influence the relative contributions of these two sources to the indoor burden of HONO. We determined that the lifetimes of trace nitrogen species varied in the order NO ~ HONO > NO₂ >HNO₃. The lifetimes with respect to reactive processes are on the order of hours for NO and HONO, about an hour for NO₂, and 30 minutes or less for HNO3. The rapid removal of NO₂ and long lifetime of HONO suggest that HONO may represent a significant fraction of the oxidized nitrogen burden in indoor air.     

Gaseous Pollutants in St. Louis and Other Cities

During the fall of 1972, a study was undertaken to characterize gaseous air pollutants in the St. Louis metropolitan area. Information obtained in this study will be used in planning air pollution modeling studies to be carried out over the next 4 or 5 years under the Regional Air Pollution Study (RAPS) of the Environmental Protection Agency. From analyses of roadway samples, it was found that certain compounds in automotive emissions such as acetylene, carbon monoxide, o-xylene, ethylene, and 2-methylpentane occur in consistent proportions to other compounds. The concentrations of these indicator compounds in atmospheric samples were used to estimate the amounts of other hydrocarbons present that are attributable to automotive related emissions. Methane, ethane, and propane were found to originate principally from nonautomotive sources, both at St. Louis University and the St. Louis CAMP station. Similar concentrations were found in urban and non-urban areas. A comparison of ethylene-CO and propyl-ene-CO ratios in urban and non-urban areas indicates that CO can serve as an indicator of transport of urban pollutants. Sunlight irradiations of captured air samples showed increasing ozone production with increasing initial concentrations of hydrocarbons and nitrogen oxides. Substantial ozone and peroxyacetyl nitrate were formed from a total non-methane hydrocarbon concentration of only ¹/₄ ppm C.     

Contamination of the Lake Tahoe Air Basin by High Molecular Weight Petroleum Residues

The atmosphere of the Lake Tahoe air basin is contaminated with high molecular weight (> C₁₂) petroleum hydrocarbons. Aerosol samples were collected by high-volume filtration and the solvent-soluble organic matter was analyzed. The relative concentrations of petroleum residues found were as follows: winter > summer and day > night. This contamination is primarily due to the poorer combustion of diesel and home heating fuels at that altitude and during periods of colder climate.