Release flux of mercury from different environmental surfaces in Chongqing, China

An investigation was conducted to estimate mercury emission to the atmosphere from different environmental surfaces and to assess its contribution to the local mercury budget in Chongqing, China. Mercury flux was measured using dynamic flux chamber (DFC) at six soil sites of three different areas (mercury polluted area, farmland and woodland) and four water surfaces from August 2003 to April 2004. The mercury emission fluxes were 3.5 ± 1.2–8.4 ± 2.5 ng m⁻² h⁻¹ for three shaded forest sites, 85.8 ± 32.4 ng m⁻² h⁻¹ for farming field, 12.3 ± 9.8–733.8 ± 255 ng m⁻² h⁻¹ for grassland sites, and 5.9 ± 12.6–618.6 ± 339 ng m⁻² h⁻¹ for water surfaces. Mercury exchange fluxes were generally higher from air/water surfaces than from air/soil surfaces. The mercury negative fluxes were found in tow soil sites at overcast days (mean = −6.4 ± 1.5 ng m⁻² h⁻¹). The diurnal and seasonal variations of mercury flux were observed in all sites. The mercury emission responded positively to the solar radiation, but negatively to the relative humidity. The mercury flux from air/soil surfaces was significantly correlated with soil temperature, which was well described by an Arrhenius-type expression with activation energy of 31.1 kcal mol⁻¹. The annual mercury emission to the atmosphere from land surface is about 1.787 t of mercury in Chongqing.     

Isoprene emission from tropical trees in Okinawa Island, Japan

This study surveyed isoprene emission from 42 indigenous and exotic tropical trees in subtropic Okinawa, Japan. Of the 42 trees studied, 4 emitted isoprene at a rate in excess of 20 μg g⁻¹ h⁻¹, and 28 showed the rates of 1–10 μg g⁻¹ h⁻¹. The remainder emitted less than 1 μg g⁻¹ h⁻¹. The majority of trees in this study may therefore fall within the lower emitting species. However, species in Moraceae that is indigenous in Okinawa emitted isoprene at relatively higher rates with an average of 14.2 μg g⁻¹ h⁻¹. The highest emission rate of 107.1 μg g⁻¹ h⁻¹ for Ficus virgata yielded the area basis rate of 47.4 nmol m⁻² s⁻¹, which is almost equivalent to the rate of high emitting species. Furthermore, a linear relationship between light intensity and isoprene emission was noted with Ficus virgata up to 1700 μmol m⁻² s⁻¹. These findings may show the potential importance of subtropical areas as sources of isoprene to the atmosphere.     

Methane fluxes from tundra soils and snowpack in the maritime Antarctic

Methane fluxes were measured from three exposed tundra sites and four snowpack sites on the Fildes Peninsula in the maritime Antarctic in the summertime of 2002. The average fluxes at two normal tundra sites were −15.3 μg m⁻² h⁻¹ and −14.3 μg m⁻² h⁻¹, respectively. The fluxes from tundra site with fresh penguin dropping addition showed positive values with the average of 36.1 μg m⁻² h⁻¹, suggesting that the deposition of fresh droppings greatly enhanced CH₄ emissions from the poor Antarctic tundra during penguin breeding periods. The summertime variation in CH₄ flux was correlated with surface ground temperature and the precipitation. The correlation between the flux and PT₀, which is the product of the precipitation and surface ground temperature, was quite strong. The diurnal cycle of CH₄ flux from the tundra soils was not obtained due to local fluky weather conditions. The fluxes through four snowpack sites were also obtained by the vertical CH₄ concentration gradient and their average fluxes were −46.5 μg m⁻² h⁻¹, −28.2 μg m⁻² h⁻¹, −46.4 μg m⁻² h⁻¹ and −17.9 μg m⁻² h⁻¹, respectively, indicating that tundra soils under snowpack also consume atmospheric CH₄ in the maritime Antarctic; therefore these fluxes could constitute an important part of the annual CH₄ budget for Antarctic tundra ecosystem.     

Distribution of pesticides and heavy metals in trophic chain

Determination of triazines herbicides (atrazine and simazine) by high performance liquid chromatography (HPLC) in samples of trophic chain were worked out. Determination limits of 0.5 μg g⁻¹ for atrazine, 0.8 μg g⁻¹ for simazine with pesticides recovery of 70–77% in trophic chain samples were obtained. The content of simazine in soils was in range 1.72–57.89 μg g⁻¹, in grass 5–88 μg g⁻¹, in milk 2.32–15.29 μg g⁻¹, in cereals 10.98–387 μg g⁻¹, in eggs 30.14–59.48 μg g⁻¹, for fruits: 2.45–6.19 μg g⁻¹. The content of atrazine in soils was in range 0.69–19.59 μg g⁻¹, in grass 7.85–23.85 μg g⁻¹, in cereals 1.88–43.08 μg g⁻¹. Cadmium, lead and zinc were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) in the same samples as atrazine and simazine. Determination limits for cadmium 5 × 10⁻³ μg g⁻¹, for lead 1 × 10⁻² μg g⁻¹, and for zinc 0.2 × 10⁻³ μg g⁻¹, were obtained. The content of cadmium in soil was in range 0.13–5.89 μg g⁻¹, in grass 114–627.72 × 10⁻³ μg g⁻¹, in milk 8.88–61.88 × 10⁻³ μg g⁻¹, in cereals 0.20–0.31 μg g⁻¹, in eggs 0.11–0.15 μg g⁻¹, in fruits 0.23–0.59 μg g⁻¹. The content of lead in soils was in range 0.57–151.50 μg g⁻¹, in grass 0.16–136.57 μg g⁻¹, in milk 1.16–3.74 μg g⁻¹, in cereals 1.05–5.47 μg g⁻¹, in eggs 5.79–55.87 μg g⁻¹, in fruits 21.00–87.36 μg g⁻¹. Zinc content in soil was in range 9.15–424.5 μg g⁻¹, in grass 35.20–55.87 μg g⁻¹, in milk 20.00–34.38 μg g⁻¹, in cereals 14.94–28.78 μg g⁻¹, in eggs 15.67–32.01 μg g⁻¹, in fruits 14.94–18.88 μg g⁻¹.

Described below extraction and mineralization methods for particular trophic chains allowed to determine of atrazine, simazine, cadmium, lead and zinc with good repeatability and precision. Emphasis was focused on liquid–liquid extraction and solid-phase extraction of atrazine and simazine from analysed materials, as well as, on monitoring the content of herbicides and metals in soil and along trophic chain. Higher concentration of pesticides in samples from west region of Poland in comparison to that of east region is likely related to common applying them in Western Europe in relation to East Europe. The content of metals strongly depends on samples origin (industry area, vicinity of motorways).     

Nitrous oxide emissions from tundra soil and snowpack in the maritime Antarctic

The nitrous oxide emissions were measured at three tundra sites and one snowpack on the Fildes Peninsula in the maritime Antarctic in the summertime of 2002. The average fluxes at two normal tundra sites were 1.1 ± 2.2 and 0.6 ± 1.7 μg N₂O m⁻² h⁻¹, respectively. The average flux from tundra soil site with penguin dropping addition was 3.7 ± 2.0 μg N₂O m⁻² h⁻¹, 3–6 times those from the normal tundra soils, suggesting that the deposition of fresh droppings enhanced N₂O emissions during penguin breeding period. The summer precipitation had an important effect on N₂O emissions; the flux decreased when heavy precipitation occurred. The diurnal cycle of the N₂O fluxes from Antarctic tundra soils was not obtained due to local fluky weather conditions. The N₂O fluxes through four snowpack sites were obtained by the vertical N₂O concentration gradient and their average fluxes were 0.94, 1.36, 0.81 and 0.85 μg N₂O m⁻² h⁻¹, respectively. The tundra soils under snowpack emitted N₂O in the maritime Antarctic and increased local atmospheric N₂O concentrations; therefore these fluxes could constitute an important part of the annual N₂O budget for Antarctic tundra ecosystem.     

Leaching of atrazine, metolachlor and diuron in the field in relation to their injection depth into a silt loam soil

A field experiment was conducted on a Calcaric Cambisol soil to study the consequences of the penetration depth and properties of pesticides on the risk of subsequent leaching. Three pesticides with different mobility characteristics and bromide were injected at 30 cm (where soil organic matter (OM) was 2%) and 80 cm (soil OM 0.5%) on irrigated plots without a crop. The migration of injected solutes was assessed for two years by sampling the soil solution using six porous cups installed at 50 and 150 cm depth and by relating solute contents to drainage water flux estimated by the STICS model (Simulateur mulTIdisciplinaire pour les Cultures Standard). Pesticides injected at 30 cm were strongly retained so that no metolachlor or diuron was detected at 50 and 150 cm. The ratio of atrazine peak concentration in the soil solution to concentration in the injected solution (C/C₀) was 1 × 10⁻³ and 0.2 × 10⁻³, respectively, at 50 and 150 cm. When injected at 80 cm, (C/C₀) of atrazine, metolachlor and diuron were 10 × 10⁻³, 1 × 10⁻³ and 0.3 × 10⁻³ at 150 cm, respectively; 1/(C/C₀) was correlated with K_oc values reported from databases. The ratio of drainage volume to the amount of water at field capacity in the soil layer between the injection point at 30 cm and the water sampling level (V/V₀) at 50 and 150 cm was 0.6 and 0.9, respectively, for bromide and 1.6 and 1.0 for atrazine. V/V₀ of the injected solutes at 80 cm was for bromide, atrazine, metolachlor and diuron 0.6, 0.9, 1.2 and 1.7, respectively; pesticide V/V₀ was correlated with K_oc. The retardation factor was a good indicator of migration risk, but tended to overestimate retardation of molecules with high K_oc. Atrazine desorption represented an additional leaching risk as a source of prolonged low contamination. The large variability in soil solution of bromide and pesticide concentrations in the horizontal plane was attributed to flow paths and clods in the tilled soil layer. This heterogeneity was assumed to channel water fluxes into restricted areas and thereby increase the risk of groundwater contamination. The methodology used in the field proves to provide consistent results.     

Biodegradation kinetics and toxicity of vegetable oil triacylglycerols under aerobic conditions

The aerobic biodegradation of five triacylglycerols (TAGs), three liquids [triolein (OOO), trilinolein (LLL), and trilinolenin (LnLnLn)] and two solids [tripalmitin (PPP) and tristearin (SSS)] was studied in water. Respirometry tests were designed and conducted to determine the biochemical oxygen demand (BOD) parameters of the compounds. In the case of the solid lipids, the degradation process was limited by their extremely non-polar nature. When added to water, PPP and SSS formed irregular clumps or gumballs, not a fine and uniform suspension required for the lipase activity. After 30 days, appreciable mineralization was not achieved; therefore, first-order biodegradation coefficients could not be determined. The bioavailability of the liquid TAGs was restricted due to the presence of double bonds in the fatty acids (FAs). An autoxidation process occurred in the allylic chains, resulting in the production of hydroperoxides. These compounds polymerized and became non-biodegradable. Nevertheless, the non-oxidized fractions were readily mineralized, and BOD rate constants were estimated by non-linear regression: LLL (k = 0.0061 h⁻¹) and LnLnLn (k = 0.0071 h⁻¹) were degraded more rapidly than OOO (k = 0.0025 h⁻¹). Lipids strongly partitioned to the biomass and, therefore, Microtox^® toxicity was not observed in the water column. However, EC₅₀ values (<15% sample volume) were measured in the solid phase.     

Macro-porosity and leaching of atrazine in tilled and orchard loamy soils

Atrazine is the most commonly detected herbicide in the groundwater. Leaching of atrazine largely depends on soil management practices. The aim of this study was to examine leaching of atrazine in tilled and orchard silty loam soils. The experimental objects included: conventionally tilled field (CT) with main tillage operations including pre-plow (10 cm) + harrowing, mouldboard ploughing (20 cm), and a 35 year-old apple orchard (OR) with a permanent sward. To determine leaching of atrazine soil columns of undisturbed structure were taken with steel cylinders of 21.5 cm diameter and 20 cm high from the depth of 0–20 cm. All columns were equilibrated at water content corresponding to field capacity (0.21 kg kg⁻¹). Atrazine suspended in distilled water was dripped uniformly onto the surface of each column. Then water was infiltrated and breakthrough times of leachates were recorded. Atrazine concentration in the leachates was determined by means of HPLC Waters. Macro-porosity and percolation rate were higher in OR than CT soil. Cumulative recovery % of the atrazine applied was 1.267% for OR and approximately one third more from the CT soil but the rate of leaching (per unit of time) was greater from the OR soil. The lower leaching under OR than CT can be due to a greater SOM and the presence of earthworm burrows with organic burrow linings that could adsorb atrazine and contribute to preferential flow allowing solutes to bypass parts whereas the greater rate of leaching due to a greater infiltration rate.The results indicate potential of management practices for minimizing atrazine leaching.     

Direct measurement of denitrification activity in a Gulf coast freshwater marsh receiving diverted Mississippi River water

Wetland loss along the Louisiana Gulf coast and excessive nitrate loading into the Gulf of Mexico are interrelated environmental problems. Nitrate removal by soil denitrification activity was studied in a ponded freshwater marsh receiving diverted Mississippi River water for the purpose of reversing or slowing wetland loss. Labeled ¹⁵N-nitrate was applied at 3.8 g N m⁻² into four replicate study plots after removing above ground vegetation. Nitrogen gas (N₂) and nitrous oxide (N₂O) emissions from the plots were determined by isotope ratio mass spectrometry (IRMS). Nitrous oxide emissions were also compared with the results determined by gas chromatograph (GC). Results showed that it took 2 weeks to remove the added nitrate with N₂O emission occurring over a period of 4 d. The apparent denitrification dynamics were assumed to follow the Michaelis–Menten equation. The maximum denitrification rate and K_m value were determined as 12.6 mg N m ⁻² h⁻¹, and 6.5 mg N l⁻¹, respectively. Therefore the maximum capacity for nitrate removal by the marsh soil would be equivalent to 110 g N m⁻² yr⁻¹, with more than 30% of nitrogen gas evolved as N₂O. For typical nitrate concentrations in Mississippi River water of about 1 mg N l⁻¹, nitrate would be removed at a rate of 14.7 g N m⁻² yr⁻¹ with N₂O emission about 1.5%. A denitrification dynamic model showed that the efficiency of nitrate removal would largely depend on the water discharge rate into the ponded wetland. Higher discharge rate will result in less retention time for the water in the marsh where nitrate is denitrified.     

Modeling solute transport in one-dimensional homogeneous and heterogeneous soil columns with continuous time random walk

In this paper, we used the continuous time random walk (CTRW) framework to characterize the transport process in 1250-cm long one-dimensional homogenous and heterogeneous soil columns at the experiments conducted by Huang et al. [Huang, K., Toride, N., van Genuchten, M.Th., 1995. Experimental investigation of solute transport in large, homogeneous and heterogeneous, saturated soil columns. Trans. Porous Media. 18, 283-302]. The transport process was also simulated by using the advection-dispersion equation (ADE) and the spatial fractional advection-dispersion equation (FADE) for comparison. In the homogeneous soil column, the non-Fickian behavior is found at the distances less than 1000cm with beta values larger than 1.60, but less than 2, and Fickian form transport is obtained at distances larger than 1000cm with beta values larger than 2. In the heterogeneous soil column, we found the most anomalous behavior at distances from 200cm to 700cm with beta values ranging from 0.894 to 0.958, and non-Fickian transport process is observed at distances larger than 800cm with beta values in the range between 1 and 1.3. More significant non-Fickian behavior is found for transport in the heterogeneous soil column than that in the homogeneous soil column. The CTRW fits to the breakthrough curves (BTCs) have lower values of root mean square error (RMSE) and higher values of determination coefficient (r(2)), with respect to the fits of ADE and FADE. The CTRW model also is better captures the full evolution of BTCs, and especially their tails.     

Ammonia removal from pretreated methane fermentation effluent through a soil trench system: a column experiment

In order to find the optimal running conditions and mechanisms of ammonia removal through a soil trench system that is designed for treating pretreated methane fermentation effluent, a soil column whose structure was similar to the soil trench system was prepared, and irrigated with wastewater below 30 °C. At the beginning, ammonia was mainly adsorbed by the soils, and the ammonia adsorption capacity of soils gradually saturated. After the 12th day, nitrification began in the soil column; the ammonia in the soil column decreased sharply, and the nitrite and nitrate peak appeared sequentially as the wastewater application rate decreased from 0.74 to 0.37 l h⁻¹. When the nitrification in the soil column reached a steady-state, 98% of all the ammonia in the influent was transformed into nitrate.

By changing the running conditions such as temperature, aeration, and wastewater application rate, it was found that the ammonia removal efficiency can be improved by aeration and impeded by low temperature. In these three variables, wastewater application rate has much greater affect on the ammonia removal efficiency; a lower wastewater application rate can increase the ammonia removal efficiency substantially because of the longer travel time.     

Cold season CH4, CO2 and N2O fluxes from freshwater marshes in northeast China

Cold season (winter and thaw) CH₄, CO₂ and N₂O fluxes from freshwater marshes (47°35′N, 133°31′E, Northeast China) were measured, using the static chamber method. The mean CH₄ and CO₂ fluxes from Carex lasiocarpa (Cl) were 0.5 ± 0.19 and 6.23 ± 1.36 mg C m⁻² h⁻¹, respectively, and those from Deyeuxia angustifoli (Da) were 0.18 ± 0.15 and 5.22 ± 2.48 mg C m⁻² h⁻¹, respectively in winter. There was no significant difference between Cl and Da (p > 0.05). The contributions of winter CH₄ fluxes were about 5.5% and 3% in the Cl and Da, respectively. Marshes are an important potential N₂O sink in winter season in northeast China. During thaw, the CH₄ and CO₂ emissions rapidly increased, 4.5–6 times of winter emissions. Wetland became a source of N₂O. Cold season gases flux from northern wetlands play an important role in the seasonal gas exchange.     

On the performance of Fe and Fe,F doped Ti-Pt/PbO2 electrodes in the electrooxidation of the Blue Reactive 19 dye in simulated textile wastewater

The electrochemical performance of pure Ti–Pt/β-PbO₂ electrodes, or doped with Fe and F (together or separately), in the oxidation of simulated wastewaters containing the Blue Reactive 19 dye (BR-19), using a filter-press reactor, was investigated and then compared with that of a boron-doped diamond electrode supported on a niobium substrate (Nb/BDD). The electrooxidation of the dye simulated wastewater (volume of 0.1 l, with a BR-19 initial concentration of 25 mg l⁻¹) was carried out under the following conditions: current density of 50 mA cm⁻², volume flow rate of 2.4 l h⁻¹, temperature of 25 °C and electrode area of 5 cm². The performances of the electrodes in the dye decolorization were quite similar, achieving 100% decolorization, and in some cases 90% decolorization was achieved by applying only ca. 0.3 A h l⁻¹ (8 min of electrolysis). The reduction of the simulated wastewater organic load, monitored by its total organic carbon content (TOC), was greater for the Ti–Pt/β-PbO₂–Fe,F electrode obtained from an electrodeposition bath containing 1 mM Fe³⁺ and 30 mM F⁻. In this case, after 2 h of electrolysis the obtained TOC reduction was 95%, while for the pure β-PbO₂ and the Nb/BDD electrodes the reductions were 84% and 82%, respectively.     

Effects of different quinoid redox mediators on the removal of sulphide and nitrate via denitrification

The impact of different quinoid redox mediators on the simultaneous conversion of sulphide and nitrate in a denitrifying culture was evaluated. All quinones evaluated, including anthraquinone-2,6-disulphonate (AQDS), 2-hydroxy-1,4-naphthoquinone and 1,2-naphthoquinone-4-sulphonate (NQS) were reduced by sulphide under abiotic conditions. NQS showed the highest reduction rate by sulphide (132 μmol h⁻¹) and promoted the maximum rate of sulphide oxidation (87 μmol h⁻¹) by denitrifying sludge, which represents an increase of 44% compared to the control lacking quinones. The reduced form of AQDS (AH₂QDS) served as an electron donor for the microbial reduction of nitrite and N₂O, which represents the first demonstration of hydroquinones supporting the microbial reduction of denitrifying intermediates. The results taken as a whole suggest that some quinones may significantly increase the rate of removal of S and N under denitrifying conditions.     

Monoterpene emissions and carbonyl compound air concentrations during the blooming period of rape (Brassica napus)

An increasing percentage of agricultural land in Germany is used for oil seed plants. Hence, rape has become an important agricultural plant (in Saxony 1998: 12% of the farmland) in the recent years. During flowering of rape along with intensive radiation and high temperatures, a higher production and emission of biogenic VOC was observed. The emissions of terpenes were determined and more importantly, high concentrations of organic carbonyl compounds were observed during this field experiment. All measurements of interest have been carried out during two selected days with optimal weather conditions. It is found that the origin or the mechanism of formation of different group of compounds had strong influence on the day to day variation of their concentrations. The emission flux of terpenes from flowering rape plants was determined to be 16–32 μg h⁻¹ m⁻² (30–60 ng h⁻¹ per g dry plant––540–1080 ng h⁻¹ per plant), in total. Limonene, -thujene and sabinene were the most important compounds (about 60% of total terpenes). For limonene and sabinene reference emission rates (M_S) and temperature coefficients were determined: β_limonene=0.108 K⁻¹ and M_S=14.57 μg h⁻¹ m⁻²; β_sabinene=0.095 K⁻¹ and M_S=5.39 μg h⁻¹ m⁻².

The detected carbonyl compound concentrations were unexpectedly high (maximum formaldehyde concentration was 18.1 ppbv and 3.4 ppbv for butyraldehyde) for an open field. Possible reasons for these concentrations are the combination of primary emission from the plants induced by high temperature and high ozone stress, the secondary formation from biogenically and advected anthropogenically emitted VOC at high radiation intensities and furthered by the low wind speeds at this time.     

Decomposition of chlorinated dioxins, odourous compounds and NOx from MSW incineraton plant by oxidizing catalyst

An experiment was carried out to decompose chlorinated dioxins (PCDDs, PCDFs) Chlorobenzenes, NOx and odourous compounds (H₂S, CH₄S, C₂H₆S₂, C₈H₈, C₂H₆S, C₂H₄O, NH₃) simultaneously using a catalyst in the MSW incineration plant. The experiments were conducted at temperatures from 200°C to 400°C and from 3000h⁻¹ to 6000h⁻¹ at space velocity. A catalyst containing V₂O₅ and WO₃ on the basis of TiO₂ is used, an oxidizing catalyst of the honeycomb type. The average decomposition efficiencis were 95%, 98%, 92% for PCDDs(48CDDs), PCDFs(48CDFs) and Chlorobenzenes(36CLBs) at a reaction temperature of 350°C and a space velocity of 3000h⁻¹, more than 90% for NOx at a reactiont temperature of 300°C and more than 80% for odourous compounds at the reaction temperature of 300°C and a space velocity of 6000h⁻¹. All those compounds were decomposed successfully with increasing contact time and surface. The rate-determing step was the chemical reaction of catalyst surface.     

Organic chlorine compounds in lake sediments. V. Bottom of Baikal near a pulp mill

Organically bound chlorine (OCl) together with inorganic chloride (Cl⁻) was measured from bottom surface samples of the Lake Baikal near a pulp mill and compared to organic matter contents (OM). Although total contents of OCl, Cl⁻ and OM were much lower than, the ratio of OCl to OM was of the same order of magnitude as in pulp mill recipients of Finland.     

Feasibility of phosphate fertilizer to immobilize cadmium in a field

To reduce effectively cadmium (Cd) phytoextractability by phosphate fertilizer in Cd contaminated soil, fused and superphosphate (FSP) was applied at the rate of 0, 33.5 (recommendation level), 167.5, and 335 kg P ha⁻¹ for radish (Raphanus sativa L.). Unlike from what we expected, soil Cd extractability and Cd concentration in radish increased with increasing FSP application in the field. To determine the effect of FSP on Cd immobilization, FSP was mixed with the selected soil at the rate of 0, 200, 400, 800, and 1600 mg P kg⁻¹ and then incubated for 8 weeks. As observed in the field study, NH₄OAc extractable Cd concentration increased slightly with FSP addition up to 400 mg P kg⁻¹ and thereafter dramatically decreased upon increasing its application rate. Soil pH and negative charge were decreased at low level of FSP application up to 400 mg P kg⁻¹, but thereafter continually increased with increasing application level. This could be indirect evidence that net soil negative charge was increased by the specific adsorption of phosphate at the high rate of FSP application over 400 mg P kg⁻¹. The labile Cd fraction (water soluble and exchangeable + acidic fraction) increased with increasing FSP application by 400 mg P kg⁻¹ and thereafter gradually decreased with corresponding increase in unlabile fraction (oxidizable and residual fraction). Based on these results, FSP might be applied with a very high rate over 800 mg P kg⁻¹ to decrease Cd extractability in the selected field. However, this level is equivalent to 1440 kg P ha⁻¹, which is about 43 times higher than the recommendation levels for radish production and resulted in a significant increase in water soluble P concentration creating a new environmental problem. Therefore, the feasibility of FSP to reduce Cd extractability in the field is very low.     

Relationship between the loading rate of inorganic mercury to aquatic ecosystems and dissolved gaseous mercury production and evasion

The purpose of our study was to test the hypothesis that dissolved gaseous mercury (DGM) production and evasion is directly proportional to the loading rate of inorganic mercury [Hg(II)] to aquatic ecosystems. We simulated different rates of atmospheric mercury deposition in 10-m diameter mesocosms in a boreal lake by adding multiple additions of Hg(II) enriched with a stable mercury isotope (²⁰²Hg). We measured DGM concentrations in surface waters and estimated evasion rates using the thin-film gas exchange model and mass transfer coefficients derived from sulfur hexafluoride (SF₆) additions. The additions of Hg(II) stimulated DGM production, indicating that newly added Hg(II) was highly reactive. Concentrations of DGM derived from the experimental Hg(II) additions (“spike DGM”) were directly proportional to the rate of Hg(II) loading to the mesocosms. Spike DGM concentrations averaged 0.15, 0.48 and 0.94 ng l⁻¹ in mesocosms loaded at 7.1, 14.2, and 35.5 μg Hg m⁻² yr⁻¹, respectively. The evasion rates of spike DGM from these mesocosms averaged 4.2, 17.2, and 22.3 ng m⁻² h⁻¹, respectively. The percentage of Hg(II) added to the mesocosms that was lost to the atmosphere was substantial (33–59% over 8 weeks) and was unrelated to the rate of Hg(II) loading. We conclude that changes in atmospheric mercury deposition to aquatic ecosystems will not change the relative proportion of mercury recycled to the atmosphere.     

Water and solute movement in soil as influenced by macropore characteristics: 2. Macropore tortuosity

The paper describes the results of a laboratory study on the effects of macropore tortuosity on breakthrough curves BTCs and solute distribution in a Forman loam (fine loamy-mixed Udic Haploborolls) soil. BTC were obtained using 2-D columns (slab) containing artificial macropores of five different tortuosity levels. The BTCs were run under a constant hydraulic head of 0.08 m over an initially air dry soil. The input solutions contained 1190 mg l⁻¹ of potassium bromide, 10 mg l⁻¹ of Rhodamine WT, and 100 mg l⁻¹ of FD&C Blue #1. A soil column without macropores served as a control. The displacement of a non-adsorbed tracer was not affected by the tortuosity level. An increase in macropore tortuosity progressively increased the breakthrough time, increased the apparent retardation coefficient (R′), decreased the depth to the center of mass of a given adsorbed tracer, and increased the anisotropy in tracer distribution profile. The relative importance of macropore tortuosity increased with an increase in the adsorption coefficient of the tracer. Compared to macropore continuity, the macropore tortuosity had greater impact on solute distribution profile than in its leaching.