Efficient use of Fe metal as an electron transfer agent in a heterogeneous Fenton system based on Fe0/Fe3O4 composites

In this work a novel heterogeneous Fenton system based on Fe(0)/Fe3O4 composites is described. The composites with several Fe(0)/Fe3O4 ratios were prepared by two different methods, i.e. mechanical alloying of Fe(0) and Fe3O4 powders and controlled reduction of Fe3O4 with H2. Reaction studies and detailed Conversion Electron M?ssbauer surface characterization of the composites Fe(0)/Fe3O4, Fe(0), Fe3O4, alpha-Fe2O3 and gamma-Fe2O3 suggested that Fe2+surf species are essential to produce an active Fenton system. Kinetic studies for the oxidation of the dye methylene blue, used as an organic model molecule, and for the peroxide decomposition suggest that the reactions proceed via HO* radicals generated from Fe2+surf species and H2O2 in a Fenton like mechanism. The increase in activity caused by the addition of Fe(0) is discussed in terms of a creation of Fe2+surf species during the preparation of the composite and by an electron transfer mechanism from Fe(0) to Fe3+surf during the Fenton reaction to regenerate the Fe2+surf active species.     

Potential application of highly reactive Fe(0)/Fe3O4 composites for the reduction of Cr(VI) environmental contaminants

We describe the use of highly reactive Fe(0)/Fe3O4 composites for the reduction of Cr(VI) species in aqueous medium. The composites were prepared by simple mechanical alloying of metallic iron and magnetite in different proportions, i.e. Fe(0) 25, 50, 75 and 90wt%. While after 3h of reaction pure Fe(0) and pure Fe3O4 showed only a low reduction efficiency of 15% and 25% Cr(VI) conversion, respectively, the composites, in particular Fe(0)(25wt%)/Fe3O4, showed a remarkable activity with ca. 65% Cr(VI) conversion. Kinetic experiments showed a high reaction rate during the first 3h, which subsequently decreased strongly, probably due to a pH increase from 6 to 8. Experiments with composites based on Fe(0)/alpha-Fe2O3, Fe(0)/gamma-Fe2O3 and Fe(0)/FeOOH showed very low activities, suggesting that Fe(oct)2+ in the magnetite structure plays an important role in the reaction. Scanning and high resolution electron microscopies and M?ssbauer spectra (transmission and conversion electron M?ssbauer spectroscopy) indicated that the mechanical alloying process promotes a strong interaction and interface between the metallic and oxide phases, with the Fe(0) particles completely covered by Fe3O4 particles. The high efficiency of the composite Fe(0)/Fe3O4 for Cr(VI) reduction is discussed in terms of a special mechanism where an electron is transferred from Fe(0) to magnetite to reduce Fe(oct)3+ to Fe(oct)2+, which is active for Cr(VI) reduction.     

Mechanisms of NOx removal from flue gas by zero valent iron

Chemical reaction between nitric oxide (NO) andzero valent iron (ZVI) was studied in a packed-bed column process with high temperatures based on ZVI strong reducing abilities. For six controlled temperatures of 523-773 K and 400 ppm of NO (typical flue gas temperature and concentration), under short empty bed contacttime ([EBCT] 0.0226-0.0679 sec), NO was completely removed for temperature of 573-773 K but not for 523 K. Break-through curves were conducted for the five working temperatures, and the results indicated that NO reductions by ZVI were varied from 2 to 26.7 mg NO/g ZVI. Higher temperature and longer EBCT achieved better NO removal efficiency. X-ray diffraction (XRD) and electron spectroscopy for chemical analysis (ESCA) were conducted to analyze the crystal structure and oxidation state of the reacted ZVI. Three layers of iron species were detected by XRD: ZVI, Fe3O4, and Fe2O3. ZVI was the most prevalent species, and Fe3O4 and Fe2O3 were less from the XRD analysis. By ESCA, the oxidation state on the reacted ZVI surface was determined, and the species was identifled as Fe2O3, which is the most oxidizing species for iron. Therefore, three layers from the ZVI core to the ZVI surface can be identified: ZVI, Fe3O4, and Fe2O3. Combining the results from XRD and ESCA, the mechanisms for ZVI and NO can be proposed as two consecutive reactions from lower oxidation state (ZVI) in the core to higher oxidation state on the iron surface (Fe2O3): 3Fe + 4NO<--(high temperature)-->Fe3O4 + 2N2 (A1), 4Fe3O4 + 2NO<--(high temperature)-->6Fe2O3 + N2* (A2) Because there was only <5% ZVI used to remove NO comparing to theoretical ZVI used based on the proposed stoichiometry, it can be concluded that the heterogeneous reaction only occurred on the ZVI surface instead of on bulk of the ZVI.     

Photo–degradable and recyclable starch/Fe3O4/TiO2 nanocomposites: feasibility of an approach to reduce the recycling labor cost in plastic waste management

Environmental Science and Pollution Research - In this research, a biodegradable starch/Fe3O4/TiO2 bio-nanocomposites (SFT) were produced using different nano Fe3O4/TiO2 (FT) (3, 5, and 10 (wt% dry...     

Fabrication and characterization of 3,4-diaminobenzophenone-functionalized magnetic nanoadsorbent with enhanced VOC adsorption and desorption capacity

Environmental Science and Pollution Research - The present study, for the first time, utilized 3,4-diaminobenzophenone (DABP)-functionalized Fe3O4/AC@SiO2 (Fe3O4/AC@SiO2@DABP) magnetic...     

Effects of fulvic acid on aggregation,sedimentation, and adsorption of Fe3O4 magnetic nanoparticles

Environmental Science and Pollution Research - Environmental behavior, bioavailability, and risks posed by Fe3O4, magnetic nanoparticles (Fe3O4 NPs) in surface waters are affected by complex...     

淀粉改性纳米四氧化三铁的制备及其除磷效能的研究

以可溶性淀粉为改性剂,采用氧化沉淀法分别制备了可溶性淀粉改性Fe3O4以及纯Fe3O4,并研究了2种Fe3 O4粒径、表面性质以及除磷效能的差异。实验结果表明,淀粉改性使得纳米Fe3 O4粒径减小,粒径由60 nm减小到10nm左右;红外和Zeta电位结果表明淀粉在Fe3 O4粒子表面是化学吸附;2种纳米Fe3 O4对...     

Fe3O4纳米磁性微粒对全氟辛烷磺酸盐的吸附

采用共沉淀法合成Fe3O4纳米磁性颗粒,用透射电子显微镜(TEM)、X射线衍射仪(XRD)以及振动样品磁强计(VSM)对Fe3O4纳米磁性颗粒的粒径、形貌和磁性进行表征并研究Fe3O4纳米磁性微粒对全氟辛磺酸盐的吸附。结果表明:在PFOS初始浓度4 mg/L,pH为3,反应时间24 h,Fe3O4纳米磁性微粒投加量1.25 g/L,对全氟辛磺酸盐去除率达到90%。Fe3O4纳米磁性微粒对PFOS的吸附符合Freundlich吸附方程。     

Fe3O4纳米磁性微粒对全氟辛烷磺酸盐的吸附

采用共沉淀法合成Fe3O4纳米磁性颗粒,用透射电子显微镜（TEM）、X射线衍射仪（XRD）以及振动样品磁强计（VSM）对Fe3O4纳米磁性颗粒的粒径、形貌和磁性进行表征并研究Fe3O4纳米磁性微粒对全氟辛磺酸盐的吸附。结果表明：在PFOS初始浓度4 mg/L,pH为3,反应时间24 h,Fe3O4纳米磁性微粒投加量1.25 g/L,对全氟辛磺酸盐去除率达到90%。Fe3O4纳米磁性微粒对PFOS的吸附符合Freundlich吸附方程。     

Persulfate oxidation for in situ remediation of TCE. I. Activated by ferrous ion with and without a persulfate-thiosulfate redox couple

The objective of the laboratory study is to examine the conditions under which transition metal ions (e.g., ferrous ion, Fe2+) could activate the persulfate anion (S2O8(2)-) to produce a powerful oxidant known as the sulfate free radical (SO4-*) with a standard redox potential of 2.6 V. The SO4-* is capable of destroying groundwater contaminants in situ such as trichloroethylene (TCE). Experiments using Fe2+ as an activator under various molar ratios of S2O8(2)-/Fe2+/TCE in an aqueous system indicated that partial TCE degradation occurred almost instantaneously and then the reaction stalled. Either destruction of SO4-* in the presence of excess Fe2+ or the rapid conversion of all Fe2+ to Fe3+ limited the ultimate oxidizing capability of the system. Sequential addition of Fe2+ in small increments resulted in an increased TCE removal efficiency. Therefore, it appeared that Fe2+ played an important role in generating SO4-*. An observation of oxidation-reduction potential (ORP) variations revealed that the addition of sodium thiosulfate (Na2S2O3) to the ferrous ion activated persulfate system could significantly decrease the strong oxidizing conditions. It was hypothesized that the thiosulfate induced reducing conditions might convert Fe3+ to a lower valence state of Fe2+, making the Fe2+ available to activate persulfate decomposition. The sequential addition of thiosulfate (S2O3(2)-), after the initial stalling of ferrous ion activated persulfate oxidation of TCE, resulted in an improvement in TCE removal. The ferrous ion activated persulfate-thiosulfate redox couple resulted in fairly complete TCE degradation in aqueous systems in a short time frame. In soil slurry systems, TCE degradation was slower in comparison to aqueous systems.     

Selective removal of anionic dyes in single and binary system using Zirconium and iminodiacetic acid modified magnetic peanut husk

Environmental Science and Pollution Research - A novel adsorbent (PN-Fe3O4-IDA-Zr) was developed from the chemical modification of peanut husk (a low cost material) with Fe3O4, iminodiacetic acid...     

Comparison of advanced oxidation processes and identification of monuron photodegradation products in aqueous solution

The photodegradation of monuron (3-(4-chlorophenyl)-1,1-dimethylurea) in aqueous solutions under simulated solar irradiation has been conducted by different advanced oxidation processes (UV/H(2)O(2), UV/H(2)O(2)/Fe(2+), UV/H(2)O(2)/TiO(2), UV/TiO(2), dark H(2)O(2)/Fe(3+)). The degradation rates were always higher for the homogeneous catalysis in photo-Fenton reactions (UV/H(2)O(2)/Fe(2+)) compared to the heterogeneous photocatalytic systems (TiO(2)/UV and UV/H(2)O(2)/TiO(2)). Optimal concentrations of Fe(2+) and H(2)O(2) for the abatement of the herbicide in the photo-Fenton system were found to be 1 mM Fe(II) and 10 mM H(2)O(2). Several intermediary products were identified using large volume injection micro-liquid chromatography with UV detection (mu-LC-UV), mu-LC-MS and GC-MS techniques and a degradation mechanism has been proposed.     

Incinerating volatile organic compounds with ferrospinel catalyst MnFe2O4: an example with isopropyl alcohol

This paper concerns the incineration of isopropyl alcohol (IPA) using the ferrospinel catalyst MnFe2O4. It covers the preparation of the ferrospinel catalyst, the screening of catalytic activity, catalytic incineration testing, and 72-hr decay testing of the catalyst. The experimental results of catalyst screening reveal that the Mn/Fe catalyst is the best of five prepared catalysts (chromium/iron [Cr/Fe], manganese/iron [Mn/Fe], zinc/iron [Zn/Fe], nickel/iron [Ni/Fe], and pure magnetite [Fe3O4]). In tests of the catalytic incineration system used to convert IPA, 98% conversion was obtained at a space velocity of 24,000 hr(-1), an oxygen (O2) content of 21%, 1700 ppm of IPA, and a reaction temperature of 200 degrees C.     

A comparative study of the effects of chloride, sulfate and nitrate ions on the rates of decomposition of H2O2 and organic compounds by Fe(II)/H2O2 and Fe(III)/H2O2

The effects of chloride, nitrate, perchlorate and sulfate ions on the rates of the decomposition of hydrogen peroxide and the oxidation of organic compounds by the Fenton's process have been investigated. Experiments were conducted in a batch reactor, in the dark at pH < or = 3.0 and at 25 degrees C. Data obtained from Fe(II)/H2O2 experiments with [Fe(II)]0/[H2O2]0 > or = 2 mol mol(-1), showed that the rates of reaction between Fe(II) and H2O2 followed the order SO4(2-) > ClO4(-) = NO3- = Cl-. For the Fe(III)/H2O2 process, identical rates were obtained in the presence of nitrate and perchlorate, whereas the presence of sulfate or chloride markedly decreased the rates of decomposition of H2O2 by Fe(III) and the rates of oxidation of atrazine ([atrazine]0 = 0.83 microM), 4-nitrophenol ([4-NP]0 = 1 mM) and acetic acid ([acetic acid]0 = 2 mM). These inhibitory effects have been attributed to a decrease of the rate of generation of hydroxyl radicals resulting from the formation of Fe(III) complexes and the formation of less reactive (SO4(*-)) or much less reactive (Cl2(*-)) inorganic radicals.     

Oxidative transformations of environmental pharmaceuticals by Cl₂, ClO₂, O₃, and Fe(VI): kinetics assessment

Several pharmaceuticals have been detected globally in surface water and drinking water, which indicate their insufficient removal from water and wastewater using conventional treatment methods. This paper reviews the kinetics of oxidative transformations of pharmaceuticals (antibiotics, lipid regulators, antipyretics, anticonvulsants, and beta-blockers) by Cl(2), ClO(2), O(3), and ferrate(VI) (Fe(VI)O(4)(2-),Fe(VI)) under treatment conditions. In the chlorination of sulfonamide antibiotics, HOCl is the major reactive Cl(2) species whereas in the oxidation by Fe(VI), HFeO(4)(-) is the dominant reactive species. Both oxidation processes can oxidize sulfonamides in seconds at a neutral pH (t(1/2)≤ 220 s; 1 mg L(-1) HOCl or K(2)FeO(4)). The reactivity of O(3) with pharmaceuticals is generally higher than that of HOCl (k(app,pH 7) (O(3))=1-10(7)M(-1)s(-1); k(app,pH 7) (HOCl)=10(-2)-10(5)M(-1)s(-1)). Ozone selectively oxidizes pharmaceuticals and reacts mainly with activated aromatic systems and non-protonated amines. Oxidative transformation of most pharmaceuticals by O(3) occurs in seconds (t(1/2)≤ 100 s; 1 mg L(-1) O(3)) while half-lives for oxidations by HOCl differ by at least two orders of magnitude. Ozone appears to be efficient in oxidizing pharmaceuticals in aquatic environments. The limited work on Fe(VI) shows that it can also potentially transform pharmaceuticals in treatment processes.     

Comparison of various advanced oxidation processes and chemical treatment methods for COD and color removal from a polyester and acetate fiber dyeing effluent

In this paper, a comparison of various advanced oxidation processes (O3, O3/UV, H2O2/UV, O3/H2O2/UV, Fe2+/H2O2) and chemical treatment methods using Al2(SO4)3.18H2O, FeCl3 and FeSO4 for the chemical oxygen demand (COD) and color removal from a polyester and acetate fiber dyeing effluent is undertaken. Advanced oxidation processes (AOPs) showed a superior performance compared to conventional chemical treatment, which maximum achievable color and COD removal for the textile effluent used in this study was 50% and 60%, respectively. Although O3/H2O2/UV combination among other AOPs methods studied in this paper was found to give the best result (99% removal for COD and 96% removal for color), use of Fe2+/H2O2 seems to show a satisfactory COD and color removal performance and to be economically more viable choice for the acetate and polyester fiber dyeing effluent on the basis of 90% removal.     

Sustainable adsorptive removal of antibiotics from aqueous streams using Fe3O4-functionalized MIL101(Fe) chitosan composite beads

Environmental Science and Pollution Research - In this study, we synthesized recyclable Fe3O4-functionalized MIL101(Fe) chitosan composite beads for the removal of tetracycline (TC), doxycycline...     

纳米Fe3O4磁性粒子的制备及吸附性能研究

采用共沉淀法制备了纳米Fe3O4磁性粒子。应用透射电子显微镜（TEM）、扫描电子显微镜（SEM）、X-射线衍射仪（XRD）和振动样品磁强计（VSM）等对纳米磁性粒子的粒径、结构、形貌、磁性能进行了表征，进行了磁分离沉降性能和腐殖酸吸附去除实验研究。结果表明：在未添加任何分散剂的条件下，制得的纳米Fe3O4磁性粒子主要呈球状，平均粒径约11nm，为典型的反尖晶石结构；饱和磁化强度、矫顽力和剩余磁化强度分别为73．10emu／g、159．2A／m和0．41emu／g；磁分离沉降速度为重力场的50倍；纳米Fe3O4磁性粒子对腐殖酸的吸附符合Langmuir型吸附等温线。     

Fe3O4／Ag磁性纳米颗粒去除水中的铅离子

采用水相共沉淀法制备小尺寸磁性Fe3O4纳米颗粒，以没食子酸作为还原剂和表面修饰剂，还原Ag[（NH3）2]’制备出Fe3O4／Ag磁性纳米颗粒。研究该磁性纳米颗粒对水溶液中铅离子的吸附行为，研究结果表明，pH为7．0，吸附温度30℃时可得到最好的处理效果，铅的去除率可达99．7％以上，Fe3O4／Ag颗粒吸附行为符合二级动力学模型（R2〉0．99）。该磁性纳米颗粒经过多次再生处理后，仍具有很好的吸附效果，表明Fe3O4／Ag在水处理方面拥有良好的应用前景。     

Removal of As,Mn, Mo,Se, U,V and Zn from groundwater by zero-valent iron in a passive treatment cell: reaction progress modeling

Three treatment cells were operated at a site near Durango, CO. One treatment cell operated for more than 3 years. The treatment cells were used for passive removal of contamination from groundwater at a uranium mill tailings repository site. Zero-valent iron [Fe(0)] that had been powdered, bound with aluminosilicate and molded into plates was used as a reactive material in one treatment cell. The others used granular Fe(0) and steel wool. The treatment cells significantly reduced concentrations of As, Mn, Mo, Se, U, V and Zn in groundwater that flowed through it. Zero-valent iron [Fe(0)], magnetite (Fe3O4), calcite (CaCO3), goethite (FeOOH) and mixtures of contaminant-bearing phases were identified in the solid fraction of one treatment cell. A reaction progress approach was used to model chemical evolution of water chemistry as it reacted with the Fe(0). Precipitation of calcite, ferrous hydroxide [Fe(OH)2] and ferrous sulfide (FeS) were used to simulate observed changes in major-ion aqueous chemistry. The amount of reaction progress differed for each treatment cell. Changes in contaminant concentrations were consistent with precipitation of reduced oxides (UO2, V2O3), sulfides (As2S3, ZnS), iron minerals (FeSe2, FeMoO4) and carbonate (MnCO3). Formation of a free gas phase and precipitation of minerals contributed to loss of hydraulic conductivity in one treatment cell.