Adsorptive separation of cadmium from aqueous solutions and wastewaters by riverbed sand

Application of riverbed sand for the adsorptive separation of cadmium(II) from aqueous solutions has been investigated. Removal increased from 26.8 to 56.4% by decreasing the initial concentration of cadmium from 7.5 x 10(-5) to 1.0 x 10(-5)M at pH 6.5, 25 degrees C temperature, agitation speed of 100 rpm, 100 microm particle size and 1.0 x 10(-2) NaClO4 ionic strength. Process of separation is governed by first order rate kinetics. The value of rate constant of adsorption, k(ad), was found to be 2.30 x 10(-2)per min at 25 degrees C. Values of coefficient of mass transfer, beta L, were calculated and its value at 25 degrees C was found to be 1.92 x 10(-2)cm/s. Values of Langmuir constant were calculated. Values of thermodynamic parameters delta G0, delta H0 and delta S0 were also calculated and were recorded as -0.81 kcal/mol, -9.31 kcal/mol and -28.10 cal/mol at 25 degrees C. pH has been found to affect the removal of cadmium significantly and maximum removal, 58.4%, has been found at pH 8.5. Process can be used for treatment of cadmium(II) rich wastewaters.     

Biochemical characterization of a multiple heavy metal, pesticides and phenol resistant Pseudomonas fluorescens strain

Pseudomonas fluorescens SM1 isolate was found to be resistant to some major water pollutants namely Cd2+, Cr6+, Cu2+, Ni2+, Pb2+, BHC, 2,4-D, mancozeb and phenols up to a concentration four times to the normal levels occurring in the highly pollulated regions. Curing experiment brought about the loss of one or more resistance markers indicating the plasmid born resistance. Plasmid profile of SM1 strain showed the presence of one DNA band of 43.6 kb. This Plasmid was isolated from SM1 strain and introduced into Escherichia coli DH5 alpha with a transformation frequency of 6.7 x 10(-4)transformants/recipient cell. The test SM1 strain was also capable of biotransforming Cr(VI) to Cr(III) which is less toxic compounds. Present studies further indicated that the test SM1 strain was not only resistant to 2,4-D, phenols and catechol but also capable of bioremediating these toxicants quite efficiently. Moreover, studies with inhibitors like sodium azide, 2,4-DNP and chloramphenicol suggested that the major mechanism for the bioremediation of the heavy metals other than Cr6+ would be the biosorption process.     

淀粉基黄原酸盐处理重金属废水的条件优化研究

采用淀粉基黄原酸盐处理含重金属的电镀废水 ,对淀粉基黄原酸盐的用量、pH值和反应时间等条件进行了研究。结果发现 ,1L含氰电镀废水 (含Cr3+15mg/L、Cu2 +3mg/L、Ni2 +9.2mg/L和Zn2 +6mg/L) ,加入 1g淀粉基黄原酸盐 ,调节 pH为 8,搅拌 1h ,过滤 ,处理后的废水中Cr3+、Cu2 +、Zn2 +和Ni2 +残余浓度分别为 0 .0 8mg/L、0 .0 1mg/L、0 .1mg/L和 0 .0 8mg/L。含有重金属盐的残渣 ,可用硝酸处理 ,以回收重金属     

皂化改性橘子皮生物吸附剂对重金属离子的吸附

以生物废料橘子皮(OP)为原料,经乙醇、氢氧化钠处理,得到改性橘子皮生物吸附剂SOP,将其用于对重金属离子Cu2+、Pb2+、Cd2+、Zn2+和Ni2+的吸附。研究了溶液pH、吸附时间和重金属离子初始浓度对SOP吸附性能的影响。结果表明,重金属离子在生物吸附剂上的吸附速率快,符合准二级动力学方程。SOP对重金属离子的吸附等温线符合Lang-muir模型,根据Langmuir模型计算SOP对Cu2+、Pb2+、Cd2+、Zn2+和Ni2+的饱和吸附量分别为56.82、152.4、66.27、33.90和23.02 mg/g,均高于改性前。常见阳离子的存在对重金属离子吸附的影响较小,改性后的橘子皮生物吸附剂可以再生重复使用4次以上,是性能良好的重金属离子吸附剂。     

Chemical climatology of high elevation spruce-fir forests in the southern Appalachian mountains

The physical and chemical climatology of high elevation (> 1500 m) spruce-fir forests in the southern Appalachian mountains was studied by establishing a weather and atmospheric chemical observatory at Mt Mitchell State Park in North Carolina (35 degrees 44' 05" N, 82 degrees 17' 15"W). Data collected during the summer and autumn (May-October) of 1986, 1987, and 1988 are reported. All measurements were made on or near a 16.5 m walk-up tower extending 10 m above the forest canopy on Mt Gibbes (2006 m msl), which is located approximately 2 km SW of Mt Mitchell. The tower was equipped with standard meteorological instrumentation, a passive cloud water collector, and gas pollutant sensors for O3, SO2, NOx. The tower and nearby forest canopy were immersed in clouds 25 to 40% of the time. Non-precipitating clouds were very acidic (pH 2.5-4.5). Precipitating clouds were less acidic (pH 3.5-5.5). The dominant wind directions were WNW and ESE. Clouds from the most common wind direction (WNW) were more acidic (mean pH 3.5) than those from the next most common wind direction (ESE, mean pH 5.5). Cloud water acidity was related to the concentration of SO4(2-), and NO3- ions. Mean concentration of H+, NH4+, SO4(2-), and NO3- ions in the cloud water varied from 330-340, 150-200, 190-200 and 120-140 micromol litre(-1) respectively. The average and range of O3 were 50 (25-100) ppbv (109) in 1986, 51 (26-102) ppbv in 1987, and 66 (30-140) during the 1988 field seasons, respectively. The daily maximum, 1-h average, and 24-h average concentrations were all greatest during June through mid-August, suggesting a correlation with the seasonal temperature and solar intensity. Throughfall collectors near the tower were used to obtain a useful estimate of deposition to the forest canopy. Between 50-60% of the total deposition of SO4(2-) was due to cloud impact.     

化学-混凝沉淀处理含氟含重金属废水研究

为解决某铝材电镀工业园含氟含重金属废水达标排放的问题，研究了化学混凝沉淀法同时处理该废水中氟与金属的效果及影响因素，采用正交和单因素实验确定了最佳工艺条件。结果表明，当CaCl₂投加量与废水中氟离子摩尔比为5∶1（即CaCl_{质量4 782 mg/L），聚氯化铝（PAC）用量为500 mg/L，pH为9.5，聚丙烯酰胺（PAM）用量2 mg/L时，出水中残留F离子浓度可降至8 mg/L，Cu²⁺、Ni²⁺、Cr⁶⁺和Zn²⁺出水浓度分别降至0.05、0.07、0.3和0.1 mg/L，出水能达到《水污染物排放限值》（DB44/26-2001）第二时段一级标准，且最为经济。}     

Investigations of chemical fraction of Co and Ni in industrial fly ash and mobility of metals in environmental conditions

The quantitative evaluation of chemical fraction of Co and Ni in the industrial fly ash by methods of five step sequential extraction was carried out in order to characterize metal mobility in environmental conditions. The research involved (i) water-soluble (pH=7), (ii) acid-soluble (pH=5), (iii) oxide, (iv) sulfide and (v) residue metal fractions. It was discovered, that the total extraction of the studied metals from fly ash to solutions take place in the following quantities Co - 35.5 and Ni - 153.0mgkg(-1). The investigations of chemical fractions proved that the subject metals occur mainly in fly ash as: oxide (Co - 7.0, Ni - 28.5mgkg(-1)) and residue (Co - 11.5, Ni - 42.5mgkg(-1)) as well as sulfide (Co - 8.5, Ni - 46.5mgkg(-1)). Low concentrations of metals for water-soluble fraction (Co - 0.7, Ni - 1.2mgkg(-1)) and acid-soluble fraction (Co - 4.5, Ni - 23.5mgkg(-1)) were observed. The fractions of Co and Ni leachable from the ash in environmental conditions contain: 24.0% (Co) and 23.3% (Ni) of metal total amount in the industrial fly ash. The obtained mobility parameter of Co and Ni can be applied to estimate the concentration increase of mobile and hardly mobile forms of these metals in soil polluted with the ash.     

Adsorption characteristics of Ni(II) on gamma-type alumina particles and its determination of overall adsorption rate by a differential bed reactor

The adsorption experiment of nickel ion [Ni(II)] on gamma-type alumina by a differential bed reactor in aqueous solutions was investigated to determine the adsorption characteristics and overall adsorption rate. The adsorbed amount increased rapidly with pH from pH 2 to 6 and kept constant over pH 6. The adsorbed amount of Ni(II) increased with temperature from 20 to 50 degrees C. Correlation coefficients (R2) of Langmuir and Freundlich adsorption isotherms were 0.9268 and 0.9489, respectively, and Freundlich isotherm was more suitable for adsorption on gamma-type alumina than Langmuir isotherm.The overall adsorption rate of Ni(II) on gamma-type alumina at pH 6 by a differential bed rector was determined as follows: r = 68.77Ce(1.61) - 17.60qe(0.36). Al(III) ions in solutions were away from the alumina surface during the adsorption of Ni(II) and Al(III) concentration increased with an increasing Ni(II) adsorbed amount on alumina.     

Utilization of Modified Attapulgite for the Removal of Sr(II), Co(II), and Ni(II) Ions from Multicomponent System,Part I: Kinetic Studies

Radionuclide sorption by natural and modified clays is extensively accepted to be an important process from the radioactive waste point of view. This work focused on modification of natural attapulgite with a layered double hydroxide to produce a novel chemisorbent for Sr2+, Ni2+, and Co2+ removal from multicomponent solution. The structural and surface characteristics of both attapulgite (ATP) and modified attapulgite (LDH-ATP) were investigated using XRD, FTIR, SEM, and thermal analysis. Comparison of sorption features of Sr2+, Ni2+, and Co2+ onto ATP and LDH-ATP was achieved; the results indicated that LDH-ATP was the most efficient sorbent for Sr2+, Ni2+, and Co2+. Kinetic studies established that the sorption is fast and reaching >90% within 30 min. The sorption of Sr2+, Ni2+, and Co2+ are well defined by non-linear pseudo-second-order model and controlled by an intra-particle diffusion mechanism. The diffusivity was determined using homogeneous surface diffusion (HSDM) model and found in the order 10−13 m2/min; this confirmed that the sorption of the three ions is chemisorption process. LDH-ATP can be employed as a candidate chemisorbent for the removal of some metal ions from waste solution.     

Bioavailability and mass balance studies of a commercial pentabromodiphenyl ether mixture in male Sprague-Dawley rats

Cyanogenic glycosides are common plant toxins. Toxic hydrogen cyanide originating from cyanogenic glycosides may affect soil processes and water quality. In this study, hydrolysis, degradation and sorption of dhurrin (4-hydroxymandelonitrile-beta-d-glucoside) produced by sorghum has been studied in order to assess its fate in soil. The log K(ow) of dhurrin was -1.18+/-0.08 (22 degrees C). Hydrolysis was a first-order reaction with respect to dhurrin and hydroxyl ion concentrations. Half lives ranged from 1.2h (pH 8.6; 25 degrees C) to 530d (pH 4; 25 degrees C). The activation energy of hydrolysis was 112+9kJ. At pH 5.8 and room temperature, addition of humic acids (50gl(-1)) increased the rate of hydrolysis tenfold, while addition of kaolinite or goethite (100-250gl(-1)) both decreased the rate considerably. No significant sorption to soil components could be observed. The degradation rates of dhurrin in top and subsoils of Oxisols, Ultisols, Alfisols and Mollisols were studied at 22 degrees C (25mgl(-1), soil:liquid 1:1 (w:V), pH 3.8-8.1). Half-lives were 0.25-2h for topsoils, and 5-288h in subsoils. Hydrolysis in solution explained up to 45% of the degradation in subsoils whereas the contribution in topsoils was less than 14%, indicating the importance of enzymatic degradation processes. The highest risk of dhurrin leaching will take place when the soil is a low activity acid shallow soil with low content of clay minerals, iron oxides and humic acids.     

Evolution of heavy metal speciation during the aerobic composting process of sewage sludge

The contents of heavy metals and their bioavailability to the soil-plant system were the major limitation to the application of sewage sludge compost in soil. This study was conducted to determine the evolution of heavy metal speciation in the course of an aerobic composting, and investigate the influence of changes of composting process parameters including pH, temperature and organic matter (OM) content on distribution of heavy metal speciation in composted sludge. The sequential extraction procedure developed by Tessier et al. was used in sludge compost to determine the heavy metal speciation. Results showed that, during composting, (1) the contents of the residue fraction for Pb, Zn and Cd were decreased but those for Ni and Cr were increased; the Cu residue fraction was almost constant; (2) the contents of the total mobile fractions (including fractions 1-4) for Zn and Pb were significantly increased, but the increase of those for Cu and Ni were not so remarkable; (3) there were significant degrees of correlation between heavy metal fractions and changes of some selected parameters (for example, pH, composting temperature, and OM content). Only the content of the total mobile fractions for Cu could be predictable from its total content. For the prediction of the total mobile fractions of Zn, Ni, Cd and Cr, the R(2) value was significantly increased by the inclusion of other variables such as pH, temperature and OM content.     

Bioleaching of heavy metals from anaerobically digested sewage sludge using FeS2 as an energy source

The effect of using FeS2 as an energy source, on the bioleaching of heavy metals (Zn, Cr, Cu, Pb and Ni) and nutrients (nitrogen and phosphorus) from anaerobically digested sludge using isolated indigenous iron-oxidizing bacteria was investigated in this paper. Addition of FeS2 in the range of 0.5-4.0 g l(-1) accelerated the acidification of sludge and raised the oxidation-reduction potential of sludge medium with an inoculation of 15% (v/v) of active bacteria, thus resulting in an overall increase in metal dissolution efficiency. After 16 days of bioleaching at 28 degrees C and an initial pH of 3.0, up to 99% of Zn, 65% of Cr, 74% of Cu, 58% of Pb and 84% of Ni can be removed from the sludge. In contrast, only 94% of Zn, 12% of Cr, 21% of Cu, 32% of Pb and 38% of Ni were leached out in the control without inoculation of iron-oxidizing bacteria and the addition of FeS2. Less than 15% of nitrogen and 6% of phosphorous were lost after 16 days of bioleaching when using FeS2 as the energy source. Comparing to 39% and 45% loss respectively for these two nutrients when using FeSO4.7H2O as the energy source, FeS2 appears to be a more suitable energy source for preserving nutrients in sludge while removing heavy metals from sludge.     

Competitive adsorption characteristics of Co2+, Ni2+, and Cr3+ by IRN-77 cation exchange resin in synthesized wastewater

Adsorption properties of Co2+, Ni2+, and Cr3+ on an Amberlite IRN-77 cation exchange resin were investigated in batch systems. Levels of adsorption rapidly approached an equilibrium state within 1 h. The adsorption characteristics of each metal onto the resin were accurately represented by Langmuir isotherms. Co2+ and Ni2+, which have an equivalent electrovalence, displayed similar levels of adsorption onto the resin when they coexisted in the solution. However, when Cr3+ was added to the solution it competitively replaced Co2+ and Ni2+ ions that had been previously adsorbed onto the resin, resulting in the desorption of these metals into the solution. The result was likely due to a higher adsorption affinity of Cr3+ relative to Co2+ and Ni2+. This implies that interactively competitive adsorption of multi-cations onto the resin should be thoroughly considered when contemplating the efficient operation of an ion exchange process in the treatment of industrial wastewater.     

芘降解菌DY-1的条件优化及降解动力学特性分析

选用已筛选出以芘为唯一碳源的假单胞菌DY-1(Pseudomonas sp.)作为芘降解菌,采用摇瓶振荡培养方法,研究了不同环境条件对菌DY-1降解芘效率的影响以及降解动力学特性。结果表明,在含芘50 mg/L的条件下培养9 d,降解率达83.2%。最适宜温度为30℃,pH值为7.5,摇床转速为120 r/min,接种量为1.5 mL;在不同培养条件下芘的降解符合一级动力学模型;低浓度Zn2+,Cd2+,Cr6+的存在对芘降解效果影响较小,Cu2+,Pb2+对芘的降解有较强的毒性;加入低浓度有机物质,蔗糖可提高DY-1芘的降解;低浓度萘或蒽的存在可促进芘的降解。     

Treatment of cork boiling wastewater using chemical oxidation and biodegradation

Three cultures were enriched from cork boiling wastewater using tannic acid as the selective carbon substrate, at 25 degrees C and pH 7.2, 25 degrees C and pH 4.7 and 50 degrees C and pH 4.7. The enrichment culture obtained at neutral pH was composed of five culturable isolates, whereas from each acidic enrichment two bacterial strains were isolated. Mesophilic isolates were Gram negative bacteria belonging to the genera Klebsiella, Pseudomonas, Stenotrophomonas and Burkholderia. Thermophilic isolates were members of the genus Bacillus. Despite the capability of the enrichment cultures to use tannic acid as single carbon and energy source, those cultures were unable to reduce the total polyphenols or the total organic carbon content of cork boiling wastewater. In order to increase the bioavailability of the organic carbon in cork boiling wastewater, biodegradation was preceded by Fenton oxidation. It was demonstrated that the combined process, using small amounts of Fenton reagents and biodegradative inoculum added almost simultaneously to cork boiling wastewater, leads to TOC reductions of more than 90%.     

Heavy metal ion influence on the photosynthetic growth of Rhodobacter sphaeroides

The potential of purple non-sulphur bacteria for bioremediation was assessed by investigating the ability of Rhodobacter sphaeroides strain R26.1 to grow photosynthetically in heavy metal contaminated environments. Bacterial cultures were carried out in artificially polluted media, enriched with the transition metal ions Hg2+, Cu2+, Fe2+, Ni2+, Co2+, MoO4(2-), and CrO4(2-) in millimolar concentration range. For each investigated ion the effect on growth parameters was evaluated. The analysis of concentration-effect curves revealed a differentiated response, indicating that diverse mechanisms of tolerance and/or resistance are involved. Adaptation or selection procedures were not applied, leading to assess intrinsic abilities of coping with these contaminants. The microorganism proved to be highly tolerant to heavy metal exposure, especially towards Co2+, Fe2+ and MoO4(2-). In addition Ni2+ and Co2+ were found to decrease the cellular content of light harvesting complexes. A characteristic behavior was observed with mercuric ions, which produced a significant increase of the lag-phase.     

Nickel speciation of residual oil fly ash and ambient particulate matter using X-ray absorption spectroscopy

The chemical speciation of Ni in fly ash produced from approximately 0.85 wt % S residual (no. 6 fuel) oils in laboratory (7 kW)- and utility (400 MW)-scale combustion systems was investigated using X-ray absorption fine structure (XAFS) spectroscopy, X-ray diffraction (XRD), and acetate extraction [1 M NaOAc-0.5 M HOAc (pH 5) at 25 degrees C]-anodic stripping voltammetry (ASV). XAFS was also used to determine the Ni speciation of ambient particulate matter (PM) sampled near the 400-MW system. Based on XAFS analyses of bulk fly ash and their corresponding acetate extraction residue, it is estimated that > 99% of the total Ni (0.38 wt %) in the experimentally produced fly ash occurs as NiSO4.xH2O, whereas > 95% of the total Ni (1.70 and 2.25 wt %) in two fly ash samples from the 400-MW system occurs as NiSO4.xH2O and Ni-bearing spinel, possibly NiFe2O4. Spinel was also detected using XRD. Acetate extracts most of the NiSO4.xH2O and concentrates insoluble NiFe2O4 in extraction residue. Similar to fly ash, ambient PM contains NiSO4.xH2O and NiFe2O4; however, the proportion of NiSO4.xH2O relative to NiFe2O4 is much greater in the PM. Results from this and previous investigations indicate that residual oil ash produced in the 7-kW combustion system lack insoluble Ni (e.g., NiFe2O4) but are enriched in soluble NiSO4.xH2O relative to fly ash from utility-scale systems. This difference in Ni speciation is most likely related to the lack of additive [e.g., Mg(OH)2] injection and residence time in the 7-kW combustion system.     

Dibenzothiophene oxidation by horseradish peroxidase in organic media: effect of the DBT:H2O2 molar ratio and H2O2 addition mode

Its is well known that in the biodesulfurization (BDS) process the low water solubility of sulfur compounds hinders its transference from the oil phase to the cells being the rate-limiting step in the metabolism of dibenzothiophenes (DBT). Thus sulfur compounds derivatives with high water solubility could be more easily transported increasing the BDS efficiency. The present work performed a stepwise evaluation of the enzymatic oxidation of DBT by horseradish peroxidase (HRP). Reactions were carried out in monophasic organic media containing 25% (v/v) acetonitrile. The following parameters were evaluated: DBT:H2O2 molar ratio (1:1-1:20); H2O2 addition mode (single or stepwise); pH (6.0-8.0) and temperature (37-50 degrees C). Best results were observed in a reaction medium at pH 8.0 presenting HRP 0.06IUml(-1), DBT 0.267mM, DBT:H2O2 molar ratio of 1:20 (stepwise hydrogen peroxide addition) and incubated at 45 degrees C for 60min. Under these conditions 60% of DBT was converted into dibenzothiophene sulfoxide (12%) and dibenzothiophene sulfone (46%). The DBT oxidation rate observed in this work, of 5mmolmin(-1)g(-1) of HRP, was 250-fold higher than the BDS rate, 20mumolmin(-1)g(-1) of catalyst. As such a combined enzyme-microbial desulfurization process could be envisaged. Products were determined by HPLC RP C-18.     

Biosorption of nickel(II) from aqueous solution by Aspergillus niger: Response surface methodology and isotherm study

In the present study, the effects of biosorbent Aspergillus niger dosage, initial solution pH and initial Ni(II) concentration on the uptake of Ni(II) by NaOH pretreated biomass of A. niger from aqueous solution were investigated. Batch experiments were carried out in order to model and optimize the biosorption process. The influence of three parameters on the uptake of Ni(II) was described using a response surface methodology (RSM) as well as Langmuir and Freundlich isotherm models. Optimum Ni(II) uptake of 4.82 mg Ni(II) g⁻¹ biomass (70.30%) was achieved at pH 6.25, biomass dosage of 2.98 g L⁻¹ and initial Ni(II) concentration of 30.00 mg L⁻¹ Ni(II). Langmuir and Freundlich were able to describe the biosorption isotherm fairly well. However, prediction of Ni(II) biosorption using Langmuir and Freundlich isotherms was relatively poor in comparison with RSM approaches. The biosorption mechanism was also investigated by using Fourier transfer infrared (FT-IR) analysis of untreated, NaOH pretreated, and Ni(II) loaded A. niger biomass.     

Reduction of selenite to red elemental selenium by moderately halotolerant Bacillus megaterium strains isolated from Bhitarkanika mangrove soil and characterization of reduced product

Two Gram (+) bacterial strains, BSB6 and BSB12, showing resistance and potential for Se(IV) reduction among 26 moderately halotolerant isolates from the Bhitarkanika mangrove soil were characterized by biochemical and 16S rDNA sequence analyses. Both of them were strictly aerobic and able to grow in a wide range of pH (4-11), temperature (4-40 °C) and salt concentration (4-12%) having an optimum growth at 37 °C, pH ∼7.5 and 7% salt (NaCl). The biochemical characteristics and 16S rDNA sequence analysis of BSB6 and BSB12 showed the closest phylogenetic similarity with the species Bacillus megaterium. Both the strains effectively reduced Se(IV) and complete reduction of selenite (up to 0.25 mM) was achieved within 40 h. SEM with energy dispersive X-ray and TEM analyses revealed the formation of nano size spherical selenium particles in and around the bacterial cells which were also supported by the confocal micrograph study. The UV-Vis diffuse reflectance spectra and XRD of selenium precipitates revealed that the selenium particles are in the nanometric range and crystalline in nature. These bacterial strains may be exploited further for bioremediation process of Se(IV) at relatively high salt concentrations and green synthesis of selenium nanoparticles.