Amelioration of toxicopathological effects of cadmium with silymarin and milk thistle in male Japanese quail (Coturnix japonica)

Environmental Science and Pollution Research - Cadmium is an important widely distributed heavy metal in the environment due to its several industrial uses, while milk thistle is an important herb...     

The Application of the Karl Fischer Oven for the Determination of Water in Consumer Products

Abstract

The direct Karl Fischer (KF) titration method has known interferences for measuring water content. In addition, in analyzing some paints, KF can fail to produce an accurate analysis. The California Air Resources Board (GARB) staff has developed a KF procedure that can be used to determine the water content of consumer products. The procedure uses an oven accessory to the titration system, and is based on a distillation method developed by the California Polytechnical University at San Luis Obispo (Cal Poly). Samples are diluted in l-methoxy-2-propanol (MPA), and an aliquot is injected into an enclosed oven system, where the MPA/water azeotrope is swept directly into the KF titration vessel. The technique is accurate and precise and, thus far, proves to be a fast and reliable method for analysis.     

Assessment of instream foam formation and quantification of foam in effluents

Although the foam formation on surface waters nowadays is not comparable with the foam “mountains” in the 1970s, it still is an issue of water quality concern. A drawback in the discussion is the lack of methods to assess instream foam formation and foam emitted by point sources. Foam formation on a transboundary river in Austria led to an intensive study resulting in two parameters to quantify instream and emitted foam. Foam potential is introduced as emission parameter that is defined as flow rate of river water, which can foam due to an effluent’s discharge. The foam index (FI) represents a parameter to assess the foam on the river and allows a semi-quantitative differentiation between the varying foaming conditions. This publication will present the developed methods and show some results to prove their accuracy and applicability.     

Use and environmental implications of pulp-mill sludge as an organic fertilizer

Pulp-mill sludge is an industrial by-product with a high level of organic matter, which is eventually biodegradable. Since there are few alternatives for its practical use, its utilization as an agricultural fertilizer is proposed. An experiment was carried out during 2 years, with yellow lupin plants (Lupinus luteus L.), in order to define the critical application levels of this material. Biodegradability of the sludge in the soil was also evaluated, as well as its pollutant effects. Results obtained in the first year of the experiment showed that an application rate larger than 50 t ha(-1) of pulp-mill sludge, has a depressive effect on yield. Yet, this effect is completely dissipated in the second year. Finally, it is concluded that, if the use of this organic waste as an agricultural fertilizer is adequately monitored, soil pollution problems should not occur.     

The Formulation of Emission Control Strategies Using a Cubic Polynomial Approximation

Assuming the existence of an ambient air standard for a given pollutant, there is some agreement that emission standards for local area and point sources should be established by formulating and testing various “control strategies” with use of a computer diffusion model. The procedure requires several, perhaps many, computer simulations of pollutant dispersion followed by an analysis of the results of each simulation. Part of this analysis is to include an “optimization” of sorts which is intended to provide a workable control strategy which, in turn, is to indicate required emission level reductions for point sources. This paper is intended to describe and apply an approximation technique which, when used in conjunction with a diffusion model, could be of value in determining acceptable emission levels for point sources.     

Value of information analysis in remedial investigations

Site investigations of contaminated land are associated with high costs. From a societal perspective, just enough economic resources should be spent on investigations so that society's limited resources can be used optimally. The solution is to design investigation programs that are cost effective, which can be performed using value of information analysis (VOIA). The principle of VOIA is to compare the benefit at the present state of knowledge with the benefit that is expected after an investigation has been performed. A framework for VOIA of site investigations is presented based on Bayesian risk-cost-benefit decision analysis. The result is an estimate of the value of an investigation program and, for specific problems, the optimal number of samples. The main strength of the methodology is that it promotes clear thinking and compels the decision maker to reflect on issues that otherwise would be ignored. The main weakness is the complexity of VOIA models.     

Numerical modeling of oxygen exclusion experiments of anaerobic bioventing

A numerical and experimental study of transport phenomena underlying anaerobic bioventing (ABV) is presented. Understanding oxygen exclusion patterns in vadose zone environments is important in designing an ABV process for bioremediation of soil contaminated with chlorinated solvents. In particular, the establishment of an anaerobic zone of influence by nitrogen injection in the vadose zone is investigated. Oxygen exclusion experiments are performed in a pilot scale flow cell (2 x 1.1 x 0.1 m) using different venting flows and two different outflow boundary conditions (open and partially covered). Injection gas velocities are varied from 0.25 x 10(-3) to 1.0 x 10(-3) cm/s and are correlated with the ABV radius of influence. Numerical simulations are used to predict the collected experimental data. In general, reasonable agreement is found between observed and predicted oxygen concentrations. Use of impervious covers can significantly reduce the volume of forcing gas used, where an increase in oxygen exclusion efficiency is consistent with a decrease in the outflow area above the injection well.     

A model of oscillatory transport in granular soils, with application to barometric pumping and earth tides

A simple algebraic model is proposed to estimate the transport of a volatile or soluble chemical caused by oscillatory flow of fluid in a porous medium. The model is applied to the barometric pumping of vapors in the vadose zone, and to the transport of dissolved species by earth tides in an aquifer. In the model, the fluid moves sinusoidally with time in the porosity of the soil. The chemical concentration in the mobile fluid is considered to equilibrate with the concentration in the surrounding matrix according to a characteristic time governed by diffusion, sorption, or other rate processes. The model provides a closed form solution, to which barometric pressure data are applied in an example of pore gas motion in the vadose zone. The model predicts that the additional diffusivity due barometric pumping in an unfractured vadose zone would be comparable to the diffusivity in stagnant pore gas if the equilibration time is 1 day or longer. Water motion due to the M2 lunar tide is examined as an example of oscillatory transport in an aquifer. It is shown that the tidal motion of the water in an aquifer might significantly increase the vertical diffusivity of dissolved species when compared to diffusion in an absolutely stagnant aquifer, but the hydrodynamic dispersivity due to tidal motion or gravitational flow would probably exceed the diffusivity due to oscillatory advection.     

Innovative application of facile single pot green synthesized CuO and CuO@APTES nanoparticles in nanopriming of Vigna radiata seeds

Environmental Science and Pollution Research - Nanopriming is an emerging field of science which uses nanoparticles in solution to improve parameters of seed vigor. This leads to an initial...     

Cost-effectiveness analyses of chemical risk control policies in Japan

Results of cost-effectiveness analyses (CEA) for chemical risk control policies are presented. Advantages and disadvantages of CEA and cost-benefit analysis (CBA) are discussed. It is made clear that CEA is not an incomplete form of instrument for policy appraisal compared with CBA, but has its own value for chemical risk control policies. Firstly, cost-effectiveness ratios are actually too high to make CBA relevant as an instrument of policy appraisal. Secondly, deep-rooted uncertainties in policy appraisal make relative comparisons more attractive than an absolute value approach such as CBA. Thirdly, the index of effectiveness is not restricted to individuals' preferences, and CEA is not restricted to the criterion of efficiency.     

Assessment of ensemble-based chemical data assimilation in an idealized setting

Data assimilation is the process of integrating observational data and model predictions to obtain an optimal representation of the state of the atmosphere. As more chemical observations in the troposphere are becoming available, chemical data assimilation is expected to play an essential role in air quality forecasting, similar to the role it has in numerical weather prediction (NWP). Considerable progress has been made recently in the development of variational tools for chemical data assimilation. In this paper, we assess the performance of the ensemble Kalman filter (EnKF). Results in an idealized setting show that EnKF is promising for chemical data assimilation.     

Transformation and biodegradation of 1,2,3-trichloropropane (TCP)

PURPOSE: 1,2,3-Trichloropropane (TCP) is a persistent groundwater pollutant and a suspected human carcinogen. It is also is an industrial chemical waste that has been formed in large amounts during epichlorohydrin manufacture. In view of the spread of TCP via groundwater and its toxicity, there is a need for cheap and efficient technologies for the cleanup of TCP-contaminated sites. In situ or on-site bioremediation of TCP is an option if biodegradation can be achieved and stimulated. This paper presents an overview of methods for the remediation of TCP-contaminated water with an emphasis on the possibilities of biodegradation. CONCLUSIONS: Although TCP is a xenobiotic chlorinated compound of high chemical stability, a number of abiotic and biotic conversions have been demonstrated, including abiotic oxidative conversion in the presence of a strong oxidant and reductive conversion by zero-valent zinc. Biotransformations that have been observed include reductive dechlorination, monooxygenase-mediated cometabolism, and enzymatic hydrolysis. No natural organisms are known that can use TCP as a carbon source for growth under aerobic conditions, but anaerobically TCP may serve as electron acceptor. The application of biodegradation is hindered by low degradation rates and incomplete mineralization. Protein engineering and genetic modification can be used to obtain microorganisms with enhanced TCP degradation potential.     

The Hygienic Aspects of the Production and Use of Lead Antiknock Compounds

Hydrogen sulfide and other sulfides can be determined in the part per billion range in air if the air is bubbled through an absorption mixture of an alkaline suspension of cadmium hydroxide contained in a macro impinger. Rates as high as 1 cubic foot per minute can be used, or 0.1 cubic foot per minute with a midget impinger. The concentration of the trapped sulfides is then estimated by the methylene blue method. A colorimetric method and a spectrophotometric method are described.     

Multilayer four-flux model of scattering,emitting and absorbing media

Four-flux model allows to compute diffuse and collimated flux through a slab containing absorbing and scattering particles in an absorbing medium. An extension of this model is proposed so that the slab can be composed of an arbitrary number of layers. Moreover, emission of the particles and of the surrounding matrix is taken into account.     

Waterborne agrichemicals compromise the anti-predatory behavior of zebrafish

Environmental Science and Pollution Research - Due to human activities, there is an increasing presence of agrochemicals residues in water bodies, which could be attributed to an increased use of...     

Respirometric testing method for biodegradability of xenobiotics using compost

Abstract

A simple, accurate automated respirometer is proposed to be used for testing the biodegradability of various xenobiotics. Compost is used as a source for microorganisms. The basic principle of the respirometer is that all oxygen consumed by the microorganisms is replaced by an equal amount of oxygen produced in an electrolytic cell which is plotted against time in a registration unit.

The proposed method is illustrated with pentachlorophenol as xenobiotic compound.

The advantages of this respirometer over other common equipment is briefly discussed.     

An evaluation of surfactant foam technology in remediation of contaminated soil

Soil contamination is notoriously difficult to treat because the contaminants are often tightly bound to the soil particles. Conventional remediation technologies are becoming less popular due to the high treatment costs. This paper gives a comprehensive overview and evaluation of an emerging promising alternative, surfactant foam technology. Different from other approaches, surfactant foam technology may be designed either to remove contaminants or/and simultaneously act as an augmentation for the existing technologies such as pump-and-treat systems and bioremediation processes to improve the contaminant removal efficiency and cost effectiveness. Encouraging results were achieved from laboratory and field demonstrations. However, as an innovative technology, there are many factors to be investigated with the future development. Special attention is paid to the selection of the most appropriate foaming surfactant and surfactant concentration, which are critical to the success of the implementation of the remediation process and have significant effects on the treatment costs. Moreover, development of predictive mathematical models in for future research is helpful to optimize the remediation process.     

The Potential of Pulse-Jet Baghouses for Utility Boilers Part 3: Comparative Economics of Pulse-Jet Baghouse,Precipitators and Reverse-Gas Baghouses

Pulse-jet fabric filters (PJFFs) are widely used in U.S. industrial applications, and in both utility and industrial boilers abroad. Their smaller size and reduced cost relative to more conventional baghouses make PJFFs an attractive particulate control option for utility boilers. This article which is the third in a three-part series, compares the cost of PJFFs with electrostatic precipitators (ESPs) and reverse-gas baghouses (RGBs).

This article presents the capital, operating and maintenance (O&M), and level-ized costs for ESPs, RGBs and PJFFs. The particulate control equipment design and pricing are supplied by manufacturers of the control equipment. A comparison of costs for a base case 250-MW boiler indicates that the PJFF capital cost is 22 percent lower than the cost of an ESP with 400 SCA and 12-inch plate spacing; in addition the PJFF is 35 percent lower than the cost of an RGB. The levelized cost for a PJFF is about equal to the cost of the ESP but 14 percent lower than the cost of the RGB. Overall, the attractiveness of a PJFF versus an ESP depends on the coal type and the outlet emissions limit required. PJFF is favored when low-sulfur coal is fired due to the high-resistivity fly ash. Also, PJFF is favored as more stringent outlet emission rates are required.     

The environmental significance of surface films II. Enhanced partitioning of Lindane in thin films of octanol on the surface of water

The log of the partition coefficient for Lindane between octanol and water at 22°C is 3.2; it is 3.9 if the octanol is in the form of a lens floating on the water, and it is 4.5 between an octanol monolayer and the underlying water.     

酶体外定向分子进化技术:环境生物污染治理中的新星

环境生物技术在环境控制与污染治理中的应用主要是利用微生物降解和转换污染物.一些人类合成的化学物质由于具有高毒性,且难以被自然界微生物降解,已经严重威胁生态环境和人类的健康.生物治理以其低成本、完成矿质化和实现原位处理等特点,成为较好的治理技术.体外定向分子进化技术是一种发现新的生物表型和新酶的好方法,DNA改组是重要的体外分子进化技术,成功地改造了许多在医药、工业和环境保护等的商业酶.综述了近年来体外定向分子进化技术在环境生物污染治理中的研究进展和应用.