首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 140 毫秒
1.
Concentrations of atmospheric PM10 and chemical components (including twenty-one elements, nine ions, organic carbon (OC) and elemental carbon (EC)) were measured at five sites in a heavily industrial region of Shenzhen, China in 2005. Results showed that PM10 concentrations exhibited the highest values at 264 μg/m3 at the site near a harbor with the influence of harbor activities. Sulfur exhibited the highest concentrations (from 2419 to 3995 ng/m3) of all the studied elements, which may be related to the influence of coal used as fuel in this area for industrial plants. This was verified by the high mass percentages of SO42-, which accounted for 34.3%-39.7% of the total ions. NO3-/SO42- ratios varied from 0.64-0.71, which implies coal combustion was predominant compared with vehicle emission. The anion/cation ratios range was close to 0.95, indicating anion deficiency in this region. The harbor site showed the highest OC and EC concentrations, with the influence of emission from vessels. Secondary organic carbon accounted for about 22.6%-38.7% of OC, with the highest percentage occurring at the site adjacent to a coal-fired power plant and wood plant. The mass closure model performed well in this heavily industrial region, with significant correlation obtained between chemically determined and gravimetrically measured PM10 mass. The main constituents of PM10 were found to be organic materials (30.9%-69.5%), followed by secondary inorganic aerosol (7.9%-25.0%), crustal materials (6.7%-13.8%), elemental carbon (3.5%-10.8%), sea salt (2.4%-6.2%) and trace elements (2.0%-4.9%) in this heavily industrialized region. Principal component analysis indicated that the main sources for particulate matter in this industrial region were crustal materials and coal/wood combustion, oil combustion, secondary aerosols, industrial processes and vehicle emission.  相似文献   

2.
Knowledge of particle number size distribution(PND) and new particle formation(NPF)events in Southern China is essential for mitigation strategies related to submicron particles and their effects on regional air quality,haze,and human health.In this study,seven field measurement campaigns were conducted from December 2013 to May 2015 using a scanning mobility particle sizer(SMPS) at four sites in Southern China,including three urban sites and one background site.Particles were measured in the size range of15-515 nm,and the median particle number concentrations(PNCs) were found to vary in the range of 0.3× 10~4-2.2 × 10~4 cn~(-3) at the urban sites and were approximately 0.2 × 10~4 cm~(-3) at the background site.The peak diameters at the different sites varied largely from 22 to 102 nm.The PNCs in the Aitken mode(25-100 nm) at the urban sites were up to 10 times higher than they were at the background site,indicating large primary emissions from traffic at the urban sites.The diurnal variations of PNCs were significantly influenced by both rush hour traffic at the urban sites and NPF events.The frequencies of NPF events at the different sites were0%-30%,with the highest frequency occurring at an urban site during autumn.With higher SO_2 concentrations and higher ambient temperatures being necessary,NPF at the urban site was found to be more influenced by atmospheric oxidizing capability,while NPF at the background site was limited by the condensation sink.This study provides a unique dataset of particle number and size information in various environments in Southern China,which can help understand the sources,formation,and the climate forcing of aerosols in this quickly developing region,as well as help constrain and validate NPF modeling.  相似文献   

3.
This study presents the mass concentrations of PM_(2.5),O_3,SO_2 and NOxat one urban,one suburban and two rural locations in the Changchun region from September 25 to October 272013. Major chemical components of PM_(2.5)at the four sites were daily sampled and analyzed. Most of daily concentrations of SO_2(7–82 μg/m~3),O_3(27–171 μg/m~3) and NOx(14–213 μg/m~3) were below the limits of the National Ambient Air Quality Standard(NAAQS)in China. However,PM_(2.5)concentrations(143–168 μg/m~3) were 2-fold higher than NAAQS.Higher PM_(2.5)concentrations(~ 150 μg/m~3) were measured during the pre-harvest and harvest at the urban site,while PM_(2.5)concentrations significantly increased from 250 to400 μg m~(-3) at suburban and rural sites with widespread biomass burning. At all sites,PM_(2.5)components were dominated by organic carbon(OC) and followed by soluble component sulfate(SO_4~(2-)),ammonium(NH_4~+) and nitrate(NO_3~-). Compared with rural sites,urban site had a higher mineral contribution and lower potassium(K~+and K) contribution to PM_(2.5).Severe atmospheric haze events that occurred from October 21 to 23 were attributed to strong source emissions(e.g.,biomass burning) and unfavorable air diffusion conditions.Furthermore,coal burning originating from winter heating supply beginning on October 18 increased the atmospheric pollutant emissions. For entire crop harvest period,the Positive Matrix Factorization(PMF) analysis indicated five important emission contributors in the Changchun region,as follows: secondary aerosol(39%),biomass burning(20%),supply heating(18%),soil/road dust(14%) and traffic(9%).  相似文献   

4.
To understand the pollution characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China, total suspended particulate(TSP) and PM10samples were collected in cities of Changsha, Zhuzhou and Xiangtan from December 2011 to January 2012, and heavy metals of Cd, Pb, Cr, and As were analyzed. It shows that the average TSP concentration in Changsha, Zhuzhou and Xiangtan were(183 ± 73),(201 ± 84) and(190 ± 66) μg/m3respectively, and the average PM10 were(171 ± 82),(178 ± 65) and(179 ± 55) μg/m3respectively. The lowest TSP and PM10concentrations occurred at the background Shaping site of Changsha. The average ratio of ρ(PM10)/ρ(TSP) was 91.9%, ranging from 81.3% to 98.9%. Concerning heavy metals, in TSP samples, the concentration of Cr, As, Cd and Pb were 28.8–56.5, 18.1–76.3, 3.9–26.1 and 148.0–460.9 ng/m3, respectively, while in PM10samples, were 16.4–42.1, 15.5–67.9, 3.3–22.2 and 127.9–389.3 ng/m3, respectively. The enrichment factor of Cd was the highest, followed by Pb and As, while that of Cr was the lowest.  相似文献   

5.
The suitability of two common and ubiquitously distributed and exotic ornamental plant species in Nigeria-Delonix regia and Casuarina equisetifolia as biomonitors and as effective bioaccumulators of atmospheric trace metals(Cd,Pb,Zn and Cu) has been evaluated.Bark and leaf samples from these plant species were collected in June and July 2006 at five locations in Benin City.Four of the sampling sites were in areas of high traffic density and commercial activities,the fifth site is a remote site,selected to act as a control and also to provide background information for the metals.The plant samples were collected and processed using standard procedures and trace metals were determined using atomic absorption spectrometer.The bark of the plants was able to bioaccumulate the trace metals,especially Pb which originates from anthropogenic contributions in the city.The Pb range of 20.00-70.00 μg/g measured for the bark samples of D.regia,exceeded the normal plant Pb concentration of 0.2-20.0 μg/g and most Pb data available in literature.The bark of the plants was observed to accumulate more metals compared to the leave,while D.regia was found to be slightly better than C.equisetifolia in trace metal uptake efficiency.Spatial variations in the distributions of Pb and Zn were significant(p 0.05),and the continuous use of leaded fuel in Nigeria was identified as the predominant source of Pb in the atmosphere.  相似文献   

6.
Two sampling sites representing the urban and suburban area of Chengdu, China were sampled and analyzed for selected chemicals to characterize the evolution of the chemical composition of fogwater. A trend of total organic carbon (TOC) > total nitrogen (TN) > total inorganic carbon (TIC) was observed for both sites. Variation of inorganic ions indicated that inorganic pollutants were not accumulated in the fog. Concentrations of n-alkanes (C11-C37) at the urban site ranged from 7.58 to 27.75 ng/mL while at the suburban site concentrations were 2.57-21.55 ng/mL. The highest concentration of n-alkanes was observed in the mature period of fog (393.12 ng/mL) which was more than ten times that in the fog formation period (27.83 ng/mL) and the fog dissipation period (14.87 ng/mL). Concentrations of Σ15PAHs were in the range of 7.27-38.52 ng/mL at the urban site and 2.59-22.69 ng/mL at the suburban site. Contents of PAHs in the mature period of fog (27.15 ng/mL) > fog dissipation period (11.59 ng/mL) > fog formation period (6.42 ng/mL). Concentrations of dicarboxylic acids (C5-C9) ranged from 10.92 to 40.78 ng/mL, with glutaric acid (C5) as the dominant dicarboxylic acid. These data provide strong indications of the accumulation of certain organic chemicals of environmental concern in fog and fog water, and provide additional insights about processes in urban and suburban air acting on organic chemicals with similar physical chemical properties.  相似文献   

7.
To identify the concentrations and sources of heavy metals, and to assess soil environmental quality, 63 soil samples were collected in Yibin City, Sichuan Province, China. Mean concentrations of As, Pb, Zn, and Cu were 10.55, 61.23, 138.88 and 56.35 mg/kg, respectively. As concentrations were comparable to background values, while Pb, Zn, and Cu concentrations were higher than their corresponding background values. Industrial areas exhibited the highest concentrations of As, Pb, Zn, and Cu, while the lowest concentrations occurred in parks. Statistical analysis was performed and two cluster groups of metals were identified with Pb, Zn, and Cu in one group and As in the other. Spatial distribution maps indicated that Pb, Zn, and Cu were mainly controlled by anthropogenic activities, whereas As could be mainly accounted for by soil parent materials. Pollution index values of As, Pb, Zn, and Cu varied in the range of 0.24-1.93, 0.66-7.24, 0.42-4.19, and 0.62-5.25, with mean values of 0.86, 1.98, 1.61, and 1.78, respectively. The integrated pollution index (IPI) values of these metals varied from 0.82 to 3.54, with a mean of 1.6 and more than 90% of soil samples were moderately or highly contaminated with heavy metals. The spatial distribution of IPI showed that newer urban areas displayed relatively lower heavy metal contamination in comparison with older urban areas.  相似文献   

8.
In order to understand the size distribution and the main kind of heavy metals in particulate matter on the lead and zinc smelting affected area, particulate matter(PM) and the source samples were collected in Zhuzhou, Hunan Province from December 2011 to January 2012 and the results were discussed and interpreted. Atmospheric particles were collected with different sizes by a cascade impactor. The concentrations of heavy metals in atmospheric particles of different sizes, collected from the air and from factories, were measured using an inductively coupled plasma mass spectrometry(ICP-MS). The results indicated that the average concentration of PM, chromium(Cr), arsenic(As), cadmium(Cd) and lead(Pb) in PM was177.3 ± 33.2 μg/m~3, 37.3 ± 8.8 ng/m~3, 17.3 ± 8.1 ng/m~3, 4.8 ± 3.1 ng/m~3 and 141.6 ± 49.1 ng/m~3,respectively. The size distribution of PM displayed a bimodal distribution; the maximum PM size distribution was at 1.1–2.1 μm, followed by 9–10 μm. The size distribution of As, Cd and Pb in PM was similar to the distribution of the PM mass, with peaks observed at the range of1.1–2.1 μm and 9–10 μm ranges while for Cr, only a single-mode at 4.7–5.8 μm was observed. PM(64.7%), As(72.5%), Cd(72.2%) and Pb(75.8%) were associated with the fine mode below 2.1 μm,respectively, while Cr(46.6%) was associated with the coarse mode. The size distribution characteristics, enrichment factor, correlation coefficient values, source information and the analysis of source samples showed that As, Cd and Pb in PM were the typical heavy metal in lead and zinc smelting affected areas, which originated mainly from lead and zinc smelting sources.  相似文献   

9.
In this study, concentrations of Cr, Mn, Ni, Cu, Zn, Cd and Pb were determined in road dusts collected from different locations in Dhaka to assess source, contamination status and health risk. Energy-dispersive X-ray fluorescence spectroscopy and energy-dispersive X-ray spectroscopy were used to determine Cr, Mn, Ni, Cu, Zn, Cd and Pb and their mean concentrations were 162.27 ± 29.46, 721.18 ± 180.14, 35.65 ± 12.55, 104.56 ± 128.33, 515.32 ± 321.90, BDL, and 342.82 ± 591.20 mg/kg, respectively. Among the heavy metals, highest concentrations of Cu, Zn and Pb were found at urban sites-7 (municipal waste dumping) and 8 (medical waste incineration). Highest concentration of Cr followed by Cu and Zn was found at site-5 (Tejgaon, urban). Principal component analysis revealed that anthropogenic activities are the potential sources for Cr, Ni, Cu, Zn and Pb while earth crust for Mn. Pollution index and pollution load index results suggested that all the sites were contaminated and/or degraded by Cr, Cu, Zn and Pb except sites-9 (urban), 10 (sub-urban), 11 (rural) while sites-7 and 8 (urban) were extremely degraded. For noncarcinogenic health risk, hazard quotient values for dermal were higher compared to that of inhalation/ingestion. Though hazard index values were less than 1 at all the sites, these were at least one order of magnitude higher for children group than that of adult group, thus the children group may face more noncarcinogenic health risk at sites-7 and 8. Values of incremental lifetime cancer risk were from 10−9 to 10−11 showed no carcinogenic health risk by road dusts contaminated with the heavy metals.  相似文献   

10.
Heavy metals can be introduced into urban soils at the same time. Therefore, their selective retention and competitive adsorption by the soils become of major importance in determining their availability and movement throughout the soil. In this study, the availability and mobility of six heavy metals in eight urban soils collected from different cities of Zhejiang Province, southeastern China were assessed using distribution coefficients(Kd) and retardation factor(Rf). The results showed that there were great differences in the Kd and Rfamong the tested soils. The adsorption sequences were Cr〉Pb〉Cu〉Cd〉Zn〉Ni, and the Kd decreased with increasing levels of metal addition. Ni generally has the lowest Rf values followed closely by Cd, and Zn whereas Cr and Pb reached the highest values. The results suggest that Ni and Zn have the highest mobility associated to the lowest adsorption, Cr and Pb present the opposite behavior. Correlation analysis indicates that soil pH, CaCO3 content, and cation exchange capacity (CEC) are key factors controlling the solubility and mobility of the metals in the urban soils.  相似文献   

11.
东莞市PM1中重金属元素的污染特征及来源解析   总被引:3,自引:1,他引:2       下载免费PDF全文
采集了2011年8月—2012年7月间东莞市不同区域两点(A:生活区;B:工业区)的PM2.5~10、PM1~2.5和PM1样品,并用ICP-MS分析了颗粒物上Pb、Cu、Zn、As、Cd、V、Mn、Cr、Hg和Al等10种元素,重点研究了PM1中除Al外其它9种重金属元素的污染特征.分析结果显示,工业区B点PM1中的重金属污染明显较生活区A点严重,9种重金属元素在B点PM1中的浓度是A点的2.3~4.4倍.Zn和Pb是A、B两点PM1中主要的重金属元素,同时各重金属元素质量占PM1质量百分比范围为0.0008%~0.3530%.粒径分布、富集因子分析的结果显示,大部分重金属元素主要富集在PM1中,且主要受人为源的影响.因子分析源解析结果表明,A、B两点PM1主要来源于4类污染源:燃煤源、机动车/工厂燃油源、冶金化工源、土壤尘.污染源特征分析表明,偏北风时东莞地区PM1受局地源远距离输送影响更严重,偏南风时受本地污染源影响更严重.  相似文献   

12.
Atmospheric lead pollution in fine particulate matter in Shanghai, China   总被引:2,自引:1,他引:1  
The Pb-monitoring program was extended for 6 years from 2002 to 2007 at 17 representative urban sites (6 traffic, 5 industrial, and 6 residential sites), and 3 suburban sites to assess the lead pollution in fine particulate matter (PM2.5) after phasing out leaded gasoline in Shanghai. Compared with Pb levels reported in other places, the Pb pollution in Shanghai is still serious after phasing out leaded gasoline, which remains at high concentration range (213–176 ng/m3) in PM2.5 in winter. Significant spati...  相似文献   

13.
Nowadays, the fine particle pollution is still severe in some megacities of China, especially in the Sichuan Basin, southwestern China. In order to understand the causes, sources, and impacts of fine particles, we collected PM2.5 samples and analyzed their chemical composition in typical months from July 2018 to May 2019 at an urban and a suburban (background) site of Chengdu, a megacity in this region. The daily average concentrations of PM2.5 ranged from 5.6-102.3 µg/m3 and 4.3-110.4 µg/m3 at each site. Secondary inorganics and organic matters were the major components in PM2.5 at both sites. The proportion of nitrate in PM2.5 has exceeded sulfate and become the primary inorganic component. SO2 was easier to transform into sulfate in urban areas because of Mn-catalytic heterogeneous reactions. In contrast, NO2 was easily converted in suburbs with high aerosol water content. Furthermore, organic carbon in urban was much greater than that in rural, other than elemental carbon. Element Cr and As were the key cancer risk drivers. The main sources of PM2.5 in urban and suburban areas were all secondary aerosols (42.9%, 32.1%), combustion (16.0%, 25.2%) and vehicle emission (15.2%, 19.2%). From clean period to pollution period, the contributions from combustion and secondary aerosols increased markedly. In addition to tightening vehicle controls, urban areas need to restrict emissions from steel smelters, and suburbs need to minimize coal and biomass combustion in autumn and winter.  相似文献   

14.
O3and PM2.5were introduced into the newly revised air quality standard system in February 2012, representing a milestone in the history of air pollution control, and China's urban air quality will be evaluated using six factors(SO2, NO2, O3, CO, PM2.5and PM10) from the beginning of 2013. To achieve the new air quality standard, it is extremely important to have a primary understanding of the current pollution status in various cities. The spatial and temporal variations of the air pollutants were investigated in 26 pilot cities in China from August 2011 to February 2012, just before the new standard was executed. Hourly averaged SO2, NO2and PM10were observed in 26 cities, and the pollutants O3, CO and PM2.5were measured in 15 of the 26 cities. The concentrations of SO2and CO were much higher in the cities in north China than those in the south. As for O3and NO2, however, there was no significant diference between northern and southern cities. Fine particles were found to account for a large proportion of airborne particles, with the ratio of PM2.5to PM10ranging from 55% to 77%. The concentrations of PM2.5(57.5 μg/m3) and PM10(91.2 μg/m3) were much higher than the values(PM2.5: 11.2 μg/m3; PM10 : 35.6 μg/m3) recommended by the World Health Organization. The attainment of the new urban air quality standard in the investigated cities is decreased by 20% in comparison with the older standard without considering O3, CO and PM2.5, suggesting a great challenge in urban air quality improvement, and more eforts will to be taken to control air pollution in China.  相似文献   

15.
为探讨珠海市郊区大气环境PM2.5中主要元素尤其是重金属的污染特征及其健康风险,于2014~2015年选取春、夏、秋、冬季4个典型月采集了PM2.5样品.利用X射线荧光光谱法分析得到15种元素的含量,进一步利用富集因子和主成分分析方法分析其来源,并采用US EPA环境健康风险评价模型评估痕量重金属的健康风险.结果表明:大气PM2.5中地壳元素(Al、Si、Ca、Fe、Ti)总质量浓度在春、夏、秋、冬季典型月分别为(708±213)、(645±269)、(1155±503)和(1466±492)ng·m-3,痕量重金属元素(Ba、Co、Cr、Cu、Mn、Ni、Pb、Sb、V、Zn)总质量浓度在春、夏、秋、冬典型月分别为(271±124)、(163±87.6)、(424±192)和(546±183)ng·m-3.富集因子分析显示Sb、Zn、Pb、Cu、Ni、Ba、Ca、Co等元素富集显著,其富集因子均值范围为172~2426.主成分分析显示,区域性输送污染源、船舶源、燃煤和电子工业是PM2.5中重金属的主要来源,其贡献率分别为53.4%、13.0%、7.6%和6.8%.健康风险评价结果表明,Mn元素对儿童存在一定的非致癌风险,Cr、Pb和Co存在一定的致癌风险.  相似文献   

16.
为研究有色冶炼工业园区周边道路扬尘中重金属污染特征及其健康风险,在云南省蒙自地区采集了城市道路、有色冶炼工业园区道路以及隧道尘样品,通过再悬浮设备将尘样悬浮至Teflon滤膜上获得PM_(2.5)和PM_(10)样品,并利用ICP-MS分析了Cr、Mn、Ni、Cu、Zn、As、Cd和Pb这8种重金属的含量.结果表明,在PM_(2.5)中重金属的平均含量高于PM_(10).Pb、Cd、As和Zn在3种道路扬尘中平均含量最高,且在不同道路扬尘中平均含量差异表现为:隧道工业园区道路城市道路.隧道扬尘中Pb和As的平均含量高于其它重金属,在PM_(2.5)中达到92 338.3 mg·kg~(-1)和12 457.7 mg·kg~(-1);工业园区道路扬尘中Pb和Zn的平均含量最高,在PM_(2.5)中分别是4 381.7 mg·kg~(-1)和4 685.0 mg·kg~(-1);城市道路平均含量最高的重金属是Zn和Pb,在PM_(2.5)中为1 952.6 mg·kg~(-1)和1 944.8 mg·kg~(-1), 3种道路扬尘中Cu、Zn、As、Cd和Pb平均含量均高于云南省土壤背景值.富集因子分析和主成分分析结果显示:Cu、Zn、As、Cd和Pb在3种道路上均有明显富集,受到有色冶炼工业和交通源的显著影响;而Cr、Mn和Ni在3种道路上富集不明显,未受到明显的人为源影响.健康风险评价结果表明,摄食是主要的暴露途径;儿童的非致癌风险高于成人.在PM_(2.5)道路扬尘中所含有的As、Cd和Pb都会对成人和儿童造成非致癌风险,在PM_(10)工业园区道路和隧道扬尘中的As、Cd和Pb对人体有非致癌风险,城市道路中的As仅对儿童有非致癌风险.此外,隧道中的As具有致癌风险.  相似文献   

17.
A typical Printed Circuit Board(PCB) manufacturer was chosen as the object of this study.During PCB processing, fine particulate matter and heavy metals(Cu, Zn, Pb, Cr, Cd and Ni)will be released into the air and dust, which then impact workers' health and the environment. The concentrations of total suspended particle(TSP), PM10 and PM2.5in the off-site were 106.3, 90.0 and 50.2 μg/m3, respectively, while the concentrations of TSP, PM10 and PM2.5in the workshops ranged from 36.1 to 365.3, from 27.1 to 289.8 and from 22.1 to212.3 μg/m3, respectively. Almost all six of the heavy metals were detected in all of the particle samples except Cd. For each workshop, it was obvious that Zn was the most enriched metal in TSP, followed by Cu 〉 Pb(Cr) 〉 Ni 〉 Cd, and the same trend was found for PM10 and PM2.5. In the dust samples, Cu(which ranged from 4.02 to 56.31 mg/g) was the most enriched metal, followed by Zn, Cr, Pb, Ni and Cd, and the corresponding concentrations ranged from 0.77 to 4.47, 0.37 to 1.59, 0.26 to 0.84, 0.13 to 0.44 and nd to0.078 mg/g, respectively. The health risk assessment showed that noncancerous effects are unlikely for Zn, Pb, Cr, Cu, Cd and Ni. The carcinogenic risks for Cd and Ni were all lower than 10-6, except for Cr. This result indicates that carcinogenic risks for workers are relatively possible in the workshops. These findings suggest that this technology is advanced from the perspective of environmental protection in the waste PCB's recycling industry.  相似文献   

18.
为探讨曹妃甸采暖期和非采暖期PM2.5中Cr、Pb、As和Cd元素的污染特征、来源及健康风险,以华北理工大学曹妃甸校区为研究地点,于2017年12月—2018年10月采集98份PM2.5样品.利用重量法测定空气中PM2.5浓度,使用电感耦合等离子体质谱仪分析PM2.5中4种重金属元素(Cr、Pb、As和Cd)的浓度;采用Wilcoxon Mann-Whitney U检验比较采暖期与非采暖期,以及PM2.5超标日与非超标日各元素含量的差异,利用Kruskal-Wallis H检验法比较不同PM2.5浓度分级下4种金属元素浓度差异,用PMF(正定矩阵因子分解)模型对4种重金属元素的来源及贡献率进行解析,并用美国环境保护局推荐的人体暴露健康风险评价模型进行健康风险评估.结果表明:①曹妃甸采暖期PM2.5及Pb、As和Cd浓度均高于非采暖期,而Cr浓度略低于非采暖期.②PM2.5超标日Pb、As和Cd浓度均高于非超标日,不同PM2.5浓度级别下Pb、As和Cd浓度有所差异,且Pb、As和Cd浓度随PM2.5浓度的增加而增加.③PMF模型源解析表明,燃煤源及交通源是曹妃甸采暖期PM2.5金属元素主要来源,二者贡献率分别为50.4%和31.7%;工业源及交通源是非采暖期PM2.5金属元素的主要来源,二者贡献率分别为47.4%和37.0%.④健康风险评价结果表明,采暖期和非采暖期4种重金属元素的非致癌风险值均小于1.采暖期3种致癌性重金属(Cr、As和Cd)对成年男性、成年女性和儿童青少年的致癌风险均高于人类可接受风险水平(1×10-6);非采暖期Cr和As对成年男性、成年女性和儿童青少年的致癌风险均高于人类可接受风险水平;重金属非致癌风险(Cr、Pb、As和Cd)和致癌风险(Cr、As和Cd)指数高低均呈成年男性>成年女性>儿童青少年的特征.研究显示,在采暖期和非采暖期曹妃甸PM2.5中Pb、As和Cd浓度随PM2.5浓度的增加而增加,燃煤源和工业源是其主要来源,Cr、As和Cd对人群存在一定的致癌风险.   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号