共查询到19条相似文献,搜索用时 109 毫秒
1.
An improved implementation of distributed multiplier/fictitious domain method is presented for the direct numerical simulation of particulate flow. The key improvement is to replace a finite-element triangulation for the velocity and a “twice-coarser“ triangulation for the pressure with a rectangular discretization for the velocity and pressure. For code validation, the sedimentation of a single particle in a twodimensional channel was simulated. The results showed that the simulation is independent of the mesh size as well as the time step. The comparison between experimental data and this simulation showed that our code can give a more accurate simulation on the motion of particlesthan previous DLM code. The code was then applied to simulate the sedimentation of 600 particles in a rectangular box. The falling course ispresented and discussed. At the same time, this simulation also demonstrates that the method presented in this paper can be used for solving the initial problems involving a lager number of particles exaclly with computing durations kept at acceptable levels. 相似文献
2.
Application of numerical simulation on optimum design of two-dimensional sedimentation tanks in the wastewater treatment plant 总被引:1,自引:0,他引:1
ZENG Guang-ming ZHANG Shuo-fu QIN Xiao-sheng HUANG Guo-he LI Jian-bing 《环境科学学报(英文版)》2003,15(3):346-350
The paper establishes the relationship between the sttling efficiency and the sizes of the sedimentation through the process of numerical simulation,which is taken as of the constraints to set up a simple optimum dsigning model of sedimentation tank.The feasibility and advantages of this model based on numerical calculation are verified through the application of practical case. 相似文献
3.
Yu Huning 《环境科学学报(英文版)》1993,5(4):470-480
A synchronous observation of field microclimate parameters using a method of infrared analysis with additional air channel and circuit systems is introduced in this paper.The concentration and the flux density of CO2 in wheat field and maize field were studied.The data in several years were calculated using aerodynamic method and satisfactory results were obtained.Relation of CO2 flux to global radiation,net radiation,turbulent exchange coefficient and wind velocity were also analyzed and discussed integrated with practical aspects. 相似文献
4.
A stable finite element method for the time dependent Navier-Stokes equations was used for studying the wind flow and pollutant dispersion within street canyons. A three-step fractional method was used to solve the velocity field and the pressure field separately from the governing equations. The Streamline Upwind Petrov-Galerkin(SUPG) method was used to get stable numerical results. Numerical oscillation was minimized and satisfactory results can be obtained for flows at high Reynolds numbers. Simulating the flow over a square cylinder within a wide range of Reynolds numbers validates the wind field model. The Strouhal numbers obtained from the numerical simulation had a good agreement with those obtained from experiment. The wind field model developed in the present study is applied to simulate more complex flow phenomena in street canyons with two different building configurations. The results indicated that the flow at rooftop of buildings might not be assumed parallel to the ground as some numerical modelers did. A counter-clockwise rotating vortex may be found in street canyons with an inflow from the left to right. In addition, increasing building height can increase velocity fluctuations in the street canyon under certain circumstances, which facilitate pollutant dispersion. At high Reynolds numbers, the flow regimes in street canyons do not change with inflow velocity. 相似文献
5.
Diem-Mai Kim Nguyen Tsuyoshi Imai Thanh-Loc Thi Dang Ariyo Kanno Takaya Higuchi Koichi Yamamoto Masahiko Sekine 《环境科学学报(英文版)》2018,30(3):116-126
This paper presents the results from using a physical absorption process to absorb gaseous CO_2mixed with N_2using water by producing tiny bubbles via a liquid-film-forming device(LFFD)that improves the solubility of CO_2in water.The influence of various parameters—pressure,initial CO_2concentration,gas-to-liquid ratios,and temperature—on the CO_2removal efficiency and its absorption rate in water were investigated and estimated thoroughly by statistical polynomial models obtained by the utilization of the response surface method(RSM)with a central composite design(CCD).Based on the analysis,a high efficiency of CO_2capture can be reached in conditions such as low pressure,high CO_2concentration at the inlet,low gas/liquid ratio,and low temperature.For instance,the highest removal efficiency in the RSM–CCD experimental matrix of nearly 80%occurred for run number 20,which was conducted at 0.30 MPa,CO_2concentration of 35%,gas/liquid ratio of 0.71,and temperature of 15°C.Furthermore,the coefficients of determination,R~2,were 0.996 for the removal rate and 0.982 for the absorption rate,implying that the predicted values computed by the constructed models correlate strongly and fit well with the experimental values.The results obtained provide essential information for implementing this method properly and effectively and contribute a promising approach to the problem of CO_2capture in air pollution treatment. 相似文献
6.
In the Orbal oxidation ditch,denitrification is primarily accomplished in the outer channel.However,the detailed characteristics of the flow field and dissolved oxygen(DO)distribution in the outer channel are not well understood.Therefore,in this study,the flow velocity and DO concentration in the outer channel of an Orbal oxidation ditch system in a wastewater treatment plant in Beijing(China)were monitored under actual operation conditions.The flow field and DO concentration distributions were analyzed by computed fluid dynamic modeling.In situ monitoring and modeling both showed that the flow velocity was heterogeneous in the outer channel.As a result,the DO was also heterogeneously distributed in the outer channel,with concentration gradients occurring along the flow direction as well as in the cross-section.This heterogeneous DO distribution created many anoxic and aerobic zones,which may have facilitated simultaneous nitrification-denitrification in the channel.These findings may provide supporting information for rational optimization of the performance of the Orbal oxidation ditch. 相似文献
7.
In this paper,the eco-environmental susceptibility of Shangyi County,Northern Hebei Province of China has been calculated by using the weighted-addition method based on expert's giving a mark to each influencing factor according to their knowledge on the influence of all the factors on eco-environmental susceptibility.The eco-environmental classification and distribution map were reached based on the above results,its difference is mainly result from the physical conditions and human activity,however the value of eco-environmental susceptibility is only a relative index which can not completely reflect the quality of eco-environment.This work provided a basis for controlling the further development of desertification. 相似文献
8.
Sludge concentration dynamic distribution and its impact on the performance of UNITANK 总被引:2,自引:0,他引:2
UNITANK is a biological wastewater treatment process that combines the advantages of traditional activated sludge process and sequencing batch reactor, which is divided into Tank A, B and C. In this study, the sludge distribution and its impact on performance of UNITANK were carried out in Liede Wastewater Plant (WWTP) of Guangzhou, China. Results showed that there was a strong affiliation between Tank A and B of the system in sludge concentration distribution. The initial sludge concentration in Tank A could present the sludge distribution of the whole system. The sludge distribution was mainly influenced by hydraulic condition. Unsteady sludge distribution had an impact on variations of substrates in reactors, especially in decisive reactor, and this could lead to failure of system. Settler could partially remove substrates such as COD and NO3-N, but there was adventure of sludge deterioration. The rational initial sludge concentration in Tank A should be 4000-6000 mg/L MLSS. 相似文献
9.
Numerical simulation of the sedimentation of cylindrical pollutant particles in fluid 总被引:5,自引:1,他引:5
The sedimentation of cylindrical pollutant particles which fall through a fluid is investigated. Differing from previous research work,particle oscillation and effect of particle on the fluid are considered, and the torque exerted on a particle when viscous fluid flow around a particle is got through experiment and included in the numerical simulation. The computational results showed that the sedimentation velocities of particle increase slowly with the increase of particle aspect ratio 9. For disk-like particle, when the motion direction of particle is parallel to axis of particle, particle falls more slowly than the case of perpendicular to axis of particle; while for rod-like particle, it is inverse. For sedimentation of a crowd of high-frequency oscillating cylindrical particles with arbitrary initial orientation, both vertical velocity and horizontal velocity oscillate dramatically, the degree of oscillation of the former is stronger than the later. A crowd of particles fall more quickly than an isolated particle. Particles tend to strongly align in the direction of gravity. The computational results agreed well with the experimental ones and helpful for controlling of pollutant particles. 相似文献
10.
ZHANG Zhong-guo CHEN Zhao-yang LI Yan-zhong FAN Jing-hu FAN Bin LUAN Zhao-kun LU Dao-qiang 《环境科学学报(英文版)》2006,18(5):858-863
By increasing particle concentration and G value (root-mean-square velocity gradient) to enhance flocculation, a novel vertical-flow settler was designed to increase sedimentation effectiveness, and to simultaneously improve operational stabilization. Due to the gradual decrease in upward flow-rate of raw water, a floes blanket would form and suspend in the middle section of the settler, not at the bottom as in a conventional clarifier. Enough large floes, resulted from flocculation or fltration, would continuously settle out of the floes blanket, and simultaneously, the floes in raw water or those forming above the blanket would ceaselessly enter the floes blanket. As a result, the floes concentration in the blanket could keep a dynamic balance. The hydrodynamic shear in the blanket was improved by flow separation, which was induced by the abrupt change in flow channel. Due to the floes blanket and improved hydrodynamic shear, flocculation would be enhanced, which was helpful for removing fine particles in raw water. A comparative study showed that the novel vertical-flow settler had a much better performance in the removal of the particles in raw water than a conventional one, when they treated kaolin suspensions of different concentrations (500, 100 and 50 mg/L, respectively) coagulated by polyaluminum chloride(PAC1) at the up-flow rates of 1 and 2 mm/s, respectively. 相似文献
11.
IntroductionInwatertreatmenttechnology ,themostcommonlyusedmethodofsolidliquidseparationisgravitationalsedimentation .Fromstatistics,onequarterofthetotalinvestmentofthewastewatertreatmentplantisusedforsedimentationtanks (Swamee ,1 996) .Withthedevelopmentofc… 相似文献
12.
13.
14.
露天矿高陡边坡落石防护墙设计研究 总被引:1,自引:0,他引:1
将落石灾害防治研究引入到露天矿高陡边坡,结合河南省洛钼集团矿山公司某边坡落石问题进行模拟研究:首先采用动力学方法分析了落石运动轨迹的影响因素和运动方程,指明了落石防护设计的依据;然后采用数值模拟方法选取50块落石进行随机测试,重点考察落石的落点分布范围、弹跳高度和总动能等要素,以此为基础并结合边坡实际条件,设计了三道防护墙拦截落石的方案;最后确定了各道防护墙的位置、高度以及最小抗冲击强度.研究结果表明,该方案对落石的拦截率达到100%,对露天矿高陡边坡落石灾害的有效防治具有重要意义. 相似文献
15.
16.
Numerical simulation of a horizontal sedimentation tank considering
sludge recirculation 总被引:1,自引:0,他引:1
Most research conducted on the concentration distribution of sediment in the sedimentation tank does not consider the role of the
suction dredge. To analyze concentration distribution more accurately, a suspended sediment transportation model was constructed and
the velocity field in the sedimentation tank was determined based on the influence of the suction dredge. An application model was then
used to analyze the concentration distribution in the sedimentation tank when the suction dredge was fixed, with results showing that
distribution was in accordance with theoretical analysis. The simulated value of the outlet concentration was similar to the experimental
value, and the trends of the isoconcentration distribution curves, as well as the vertical distribution curves of the five monitoring sections
acquired through simulations, were almost the same as curves acquired through experimentation. The di erences between the simulated
values and the experimental values were significant. 相似文献
17.
以长沙市某污水处理厂二沉池为例,采用多相流混合物模型与k-ε湍流模型结合对辐流式二沉池内速度场和污泥浓度场进行了数值模拟.以出水口悬浮物浓度(SS)为响应目标,对影响二沉池沉淀效果的3个影响因素(进水口流速、颗粒污泥粒径、挡板的淹没深度)进行中心复合设计(central composite design,CCD),并经响应表面法分析得到影响出水SS的二次回归模型,确定了二沉池沉降的最佳条件:进水口流速为0.03m·s-1,颗粒污泥粒径为220.41μm,挡板的淹没深度为3.45m,采用数值仿真模拟实验得到出水口悬浮物浓度值为2.4mg·L-1,较优化之前的仿真结果一周平均值6.7mg·L-1相比,其处理效率提高了64.2%.采用数值仿真和响应表面法结合对二沉池工艺条件进行优化研究,可以加速寻优过程,是工艺优化的辅助工具. 相似文献
18.