武汉市城市生活垃圾资源化处理的经济对策分析

对城市生活垃圾进行资源化处理,不仅有利于解决城市生活垃圾所带来的城市生态环境问题,而且能够获取部分城市发展所需的资源,是发展循环经济的重要环节之一。从武汉市城市生活垃圾资源化处理的现状入手,对武汉市城市生活垃圾在回收再利用、焚烧发电、堆肥等方面的资源化处理措施予以分析,指出武汉市应优先开展回收再利用,适度发展焚烧发电和堆肥的规模,并在此基础上借鉴日本、美国和德国等国城市生活垃圾资源化处理的先进经验,提出要提高城市生活垃圾回收的比率和效率,推进城市生活垃圾资源化处理的产业化发展,以促进武汉市城市生活垃圾的资源化处理进程。     

北京市城市垃圾资源化利用潜力与途径研究

北京市城市垃圾包括生活垃圾、餐厨垃圾和园林垃圾等,垃圾的减量化、资源化、无害化处理是垃圾治理的目标。垃圾资源化处理是行业发展的一个趋势。北京市垃圾分类工作开展数年以来,生活垃圾产量的增长得到了一定程度的控制,但餐厨垃圾、园林垃圾产量仍在不断增加,其处理途径仍需进一步规范。通过分析北京市城市垃圾产量及组分、调研城市垃圾资源化利用途径现状,最终对城市垃圾资源化利用潜力与途径进行研究。     

武汉市生活垃圾源头分类回收管理对策研究

城市生活垃圾对城市及周边的生态环境带来了沉重的压力,成为制约城市经济环境可持续发展的瓶颈之一。在对武汉市生活垃圾分类回收处理的现状和问题进行分析的基础上,针对现阶段武汉市生活垃圾以末端处理为主而源头分类不足的问题,借鉴国外城市生活垃圾源头分类回收处理的相关经验,提出加强源头分类处理的社区垃圾分类回收处理模式,并提出了城市生活垃圾源头分类回收管理的具体对策与建议。     

江苏省城市生活垃圾处理现状分析

随着城市化进程的加快,城市生活垃圾对城市及周边的生态环境造成了沉重的压力。生活垃圾的有效处理显得极为重要,同时也是社会经济和环境保护协调发展的重要内容。通过对江苏省13个地级市垃圾处理场进行调查,概述了江苏省的生活垃圾的处理现状,阐述了垃圾填埋方式存在的问题。最后提出了实现江苏省城市生活垃圾处理可持续发展的建议措施,即尽量减少城市生活垃圾的产量、对城市生活垃圾进行无害化处理和将城市垃圾资源化。     

贵州省城市生活垃圾处理处置方向探讨

分析了贵州省城市生活垃圾的特点及省情 ,得知省内有较好的条件进行城市生活垃圾的综合利用处理 ,可以达到城市生活垃圾的“三化”处理。     

浅析城市垃圾综合处理与再利用

综述了城市垃圾处理的现状及特点，分析了城市垃圾综合处理与再利用的优点、可行性，指出城市垃圾综合利用是加深垃圾再利用的关键，对如何促进城市垃圾综合处理与利用提出了建议。     

论城市垃圾的处理技术及管理

随着我国经济社会的不断发展,城市垃圾的处理和管理逐渐成为了制约我国城市和环境持续健康发展的一大难题。因此,需对城市垃圾进行合理和高效的处理,加强管理体系的建设,使城市环境得到有效的保护,加快现代化城市的建设步伐。本文论述了我国城市垃圾的处理现状及技术,分析了我国城市垃圾处理及管理中所存在的问题,提出了相应的对策建议,并且探讨了城市垃圾的新型处理技术。     

城市垃圾资源化工程实例分析

目前国内城市垃圾处理大多采用卫生填埋,真正实现城市垃圾资源化的寥寥无几,造成资源的浪费.而且个别城市垃圾资源化处理厂建成后,由于垃圾分选技术关键设备没能解决,导致不能正常运行,造成投资浪费.工程采用分选、厌氧发酵、复合肥制造、沼气发电综合处理系统处理城市垃圾,并较好地解决了垃圾分选技术与设备,实现了垃圾资源化,为城市垃圾实现“减量化、资源化、无害化”以借鉴.     

我国城市生活垃圾的现状及处理对策

论述了我国城市生活垃圾的排放量，生活垃圾的组成以及生活垃圾的处理技术，并针对我国的具体情况提出了城市生活垃圾的处理对策。     

日本处理城市生活垃圾的做法及启示

随着我国城市化进程的加快，城市生活垃圾的排出量急剧增加，造成环境污染问题日益严重。垃圾不但影响城市景观，传播疾病，而且还破坏环境，浪费资源。本文通过介绍日本处理城市生活垃圾的做法和效果，比较我国处理城市生活垃圾的现状，提出我国应发挥政府职能作用，加强对国民的环保宣传和教育，建立垃圾分类制度、细化标准，创新垃圾回收处理技术，鼓励和扶持垃圾回收产业体系等建议。     

Adaptations to the dynamics of rural water supply from natural sources: A village example in semi-arid Nigeria

Domestic and agro-economic activities in the semi-arid region of Nigeria rely exclusively on rainfall, streamflow and groundwater in deep and alluvial (fadama) aquifers. Such water supply systems are subject to considerable seasonal and inter-annual variability. However, a combination of the various sources may mitigate the effects of water scarcity. This study describes the dynamics of the water sources for a village in northeastern Nigeria as an example that demonstrates the linkages between rainfall, streamflow and groundwater. Such linkages are important for developing strategies to mitigate the effects of climatic variation. Long-term records of rainfall were not available at the site so that the short-term data was interpreted in the context of the long-term climatic experience of the region. The stratigraphic profile of the aquifer was developed from resistivity methods, to supplement information obtained from well level hydrographs. Field observations and analysis of the data reveal that the beginning of the rainy season is a precarious period because none of the water sources are reliable. Rainfall infiltration recharges the shallow aquifers while lateral water flux from the floodwater-saturated fadama also contributes to water level rises in the deep wells. A study of the water level changes in response to deepening of the wells suggests that the wells are fed by an assortment of water-bearing lenses, separated by layers of low transmissivity. One major finding of this study is that there exists a close association between the wells in this riparian community and the recharge processes within the fadama. Upstream diversion, abstraction or impoundment could therefore undermine the viability of aquifer exploitation by the communities in the riparian zone. Analysis of the interactions among the various sources of water leads to the identification of several potential adaptation strategies for confronting the problem of water scarcity.     

Emissions of SO2, NO and N2O in a circulating fluidized bed combustor during co-firing coal and biomass

This paper presents the experimental investigations of the emissions of SO2, NO and N2O in a bench scale circulating fluidized bed combustor for coal combustion and co-firing coal and biomass. The thermal capacity of the combustor is 30 kW. The setup is electrically heated during startup. The influence of the excess air, the degree of the air staging, the biomass share and the feeding position of the fuels on the emissions of SO2, NO and N2O were studied. The results showed that an increase in the biomass shares resulted in an increase of the CO concentration in the flue gas, probably due to the high volatile content of the biomass. In co-firing, the emission of SO2 increased with increasing biomass share slightly, however, non-linear increase relationship between SO2 emission and fuel sulfur content was observed. Air staging significantly decreased the NO emission without raising the SO2 level. Although the change of the fuel feeding position from riser to downer resulted in a decrease in the NO emission level, no obvious change was observed for the SO2 level. Taking the coal feeding position R as a reference, the relative NO emission could significantly decrease during co-firing coal and biomass when feeding fuel at position D and keeping the first stage stoichiometry greater than 0.95. The possible mechanisms of the sulfur and nitrogen chemistry at these conditions were discussed and the ways of simultaneous reduction of SO2, NO and N2O were proposed.     

某型飞机外翼5—8肋损伤原因分析及修复探讨

目的 分析某型飞机外翼5—8肋油箱区结构不同程度损伤的原因,制定修复方案。方法采用受载分析、有限元仿真计算、静力试验数据分析等强度计算方法分析损伤产生的原因,采用扫描电子显微镜和光学显微镜对磨痕形貌进行观测等失效分析,对损伤结构件开展失效模式分析,根据损伤原因及失效模式制定科学简便的修复方案,同时对损伤长桁采取的修补措施进行强度校核。结果 通过对外翼油箱充压破坏理论分析、有限元仿真计算、静力试验数据反推,并结合飞机实际损伤情况,得出油箱破坏理论分析危险薄弱部位与真实破坏情况一致的结论。有限元仿真计算最危险结构部位与实际结构首先发生破坏部位吻合,可作为深入制定修复方案及推测实际加载压力的依据。通过静力试验数据反推、结构实际损伤及有限元仿真计算结论得出,外翼5—8肋结构出现损伤时油箱施加压力约0.5 MPa,针对损伤制定了更换外翼油箱内部第5—8肋损伤结构和贴补加强损伤长桁的修理方案,经结构强度校核,满足设计要求。结论 分析认为外翼5—8肋油箱区结构损伤原因为油箱压力超过设计值导致结构过载断裂,采用贴补加强修理损伤长桁和更换第5—8肋损伤结构的修复方案能够满足强度设计要求,可指导同类飞机类似结构损伤故障的原因分析和修理,提醒同类飞机维修人员在飞机维护时应关注外翼油箱压力超压问题。     

中国“四化”建设对水足迹强度的影响分析

采用2000—2016年中国30省市（不包括香港、澳门、台湾、西藏四省区）的数据,构建四化指标体系,计算四化发展指数,进行地区四化水平评价,通过OLS和GMM回归模型考察四化发展对水足迹强度的影响,同时设置四化之间的交互项来识别四化指标之间的相互作用。主要结论如下：首先,从四化水平的地域发展差异上来看,中国四化水平总体上呈现出东部优于中部、中部优于西部的格局,水足迹强度的分布与之类似,说明四化水平发展与水足迹强度之间可能存在相关关系;其次,计量模型显示四化水平的提升对于水足迹强度的改善有积极影响,但每一化对于水足迹强度改善的影响大小不一;第三,以交互项衡量的四化相互作用对于水足迹强度的影响作用为正,表明四化发展对水足迹强度的改善效果逐渐趋于收敛。因此,优先提升落后地区的四化水平,以四化水平的提升推动水足迹强度的降低,能够有效降低我国总体水足迹强度水平。     

Effects of seed aerosols on the growth of secondary organic aerosols from the photooxidation of toluene

Hydroxyl radical （.OH）-initiated photooxidation reaction of toluene was carried out in a self-made smog chamber. Four individual seed aerosols such as ammonium sulfate, ammonium nitrate, sodium silicate and calcium chloride, were introduced into the chamber to assess their influence on the growth of secondary organic aerosols （SOA）. It was found that the low concentration of seed aerosols might lead to high concentration of SOA particles. Seed aerosols would promote rates of SOA formation at the start of the reaction and inhibit its formation rate with prolonging the reaction time. In the case of ca. 9000 pt/cm^3 seed aerosol load, the addition of sodium silicate induced a same effect on the SOA formation as ammonium nitrate. The influence of the four individual seed aerosols on the generation of SOA decreased in the order of calcium chloride〉sodium silicate and ammonium nitrate〉ammonium sulfate.     

Impact of atrazine and nitrogen fertilizers on the sorption of chlorotoluron in soil and model sorbents

Sorption of chlorotoluron in ammonium sulfate, urea and atrazine multi-solutes system was investigated by batch experiments. The results showed application of nitrogen fertilizers to the soil could affect the behavior of chlorotoluron. At the same concentration of N, sorption of chlorotoluron decreased as the concentration of atrazine increased on the day 0 and 6 in soil, respectively. The sorption of chlorotoluron increased from 0 to 6 d when soils were preincubated with deionized water, ammonium sulfate and urea solution for 6 d. That indicated incubation time was one of the most important factors for the sorption of chlorotoluron in nitrogen fertilizers treatments. The individual sorption isotherms of chlorotoluron in rubbery polymer and silica were strictly linear in single solute system, but there were competition sorption between pesticides or between pesticides and nitrogen fertilizers. That indicated the sorption taken place by concurrent solid-phase dissolution mechanism and sorption on the interface of water-organic matter or water-mineral matter.     

洪泽湖不同入湖河流沉积物磷形态特征及生物有效性

为揭示洪泽湖入湖河流沉积物磷形态空间差异性及影响因素,分析了洪泽湖自西北向西南7条入湖河流65个表层沉积物中不同磷（P）形态,并探讨了磷形态空间赋存特征的影响因素及环境意义.研究表明：沉积物总磷（TP）含量为488.90mg/kg~960.22mg/kg,无机磷（Pi）为主要形态,相对含量为65.81%~76.16%.西部入湖流域沉积物有机磷（Po）以非活性有机磷（NLOP）为主,汴河最高,相对含量约占Po的50.41%,生物有效态无机磷（BAP）相对含量最高,占Pi的66.84%,污染程度最高;西南和西北入湖流域Po则以中活性有机磷（MLOP）为主,Pi以钙结合态无机磷（HCl-Pi）为主.西北入湖流域由于受当地地质背景的影响,HCl-Pi所占Pi相对含量最高（43.02%）,从而减缓了磷的移动能力,污染程度最低.随着沉积物污染程度的增加,生物有效态Po含量增加,但所占Po相对含量降低;HCl-Pi含量增加,所占Pi相对含量降低,这一现象和我国其它典型地区沉积物磷形态空间分布类似.西部和西南入湖流域主要受水土流失、有机面源污染及藻类生长的影响,有机质环境较高,水交换能力弱,可被有机质降解的Po组分高于可被矿化的Po组分,大部分难降解Po组分易沉积,导致西部和西南入湖流域较高的BAP和NLOP含量,富营养化程度较高.沉积物OM是各形态磷之间相互转化的关键因素,和沉积物内源磷地球生物化学循环密切相关.洪泽湖入湖流域沉积物磷形态空间差异性主要由农业面源污染物的输入而导致内源磷负荷加剧.洪泽湖西部和西南入湖流域应重点控制农田水土流失及养殖业面源污染,建设滨岸修复带,遵循少量多次增施有机肥原则,减少农用地水土流失.健全农村养殖业废水废渣处理;划定科学养殖区;提倡铜围网箱,增加水体交换率.而对于洪泽湖西北入湖流域则应重点防止过度城镇化带来的水土流失及对生态功能保护区过高的污染负荷.     

Artificial neural network model for identifying taxi gross emitter from remote sensing data of vehicle emission

Vehicle emission has been the major source of air pollution in urban areas in the past two decades. This article proposes an artificial neural network model for identifying the taxi gross emitters based on the remote sensing data. After carrying out the field test in Guangzhou and analyzing various factors from the emission data, the artificial neural network modeling was proved to be an advisable method of identifying the gross emitters. On the basis of the principal component analysis and the selection of algorithm and architecture, the Back-Propagation neural network model with 8-17-1 architecture was established as the optimal approach for this purpose. It gave a percentage of hits of 93%. Our previous research result and the result from aggression analysis were compared, and they provided respectively the percentage of hits of 81.63% and 75%. This comparison demonstrates the potentiality and validity of the proposed method in the identification of taxi gross emitters.     

Transformation of mercury speciation through the SCR system in power plants

Coal-fired utility boilers are now identified as the largest source of mercury in the United States. There is speculation that the installation of selective catalytic reduction （SCR） system for reduction of NOx can also prompt the oxidation and removal of mercury. In this paper, tests at six full-scale power plants with similar type of the SCR systems are conducted to investigate the effect of the SCR on the transformation of mercury speciation. The results show that the SCR system can achieve more than 70%-80% oxidation of elemental mercury and enhance the mercury removal ability in these units. The oxidation of elemental mercury in the SCR system strongly depends on the coal properties and the operation conditions of the SCR systems. The content of chloride in the coal is the key factor for the oxidization process and the maximum oxidation of elemental mercury is found when chloride content changes from 400 to 600 ppm. The sulfur content is no significant impact on oxidation of elemental mercury.     

Adsorption thermodynamics and kinetic investigation of aromatic amphoteric compounds onto different polymeric adsorbents

The adsorption behavior of p-aminobenzoic acid and o-aminobenzoic acid onto the different polymeric adsorbents was systematically investigated as a function of the solution concentration and temperature.Experimental results indicated that the equilibrium adsorption data of the four polymeric adsorbents fitted well in the Freundlich isotherm.The adsorption capacity of multi-functional polymeric adsorbent NJ-99 was the highest,which might be attributed to the strong hydrogen-bonding interaction between the amino groups on the resin and the carboxyl group of aminobenzoic acid.The adsorption capacity of o-aminobenzoic acid onto any adsorbent was higher than p-aminobenzoic acid.Thermodynamic studies suggested the exothermic,spontaneous physical adsorption process.Adsorption kinetics results showed that the adsorption followed the pseudo-second-order kinetics model and the intraparticle mass transfer process was the rate-controlling step.