Assessing the effects of surface-bound humic acid on the phototoxicity of anatase and rutile TiO2 nanoparticles in vitro

In this study,the cytotoxicity of two different crystal phases of TiO₂ nanoparticles,with surface modification by humic acid（HA）,to Escherichia coli,was assessed.The physicochemical properties of TiO₂ nanoparticles were thoroughly characterized.Three different initial concentrations,namely 50,100,and 200 ppm,of HA were used for synthesis of HA coated TiO₂ nanoparticles（denoted as A/RHA50,A/RHA100,and A/RHA200,respectively）.Results indicate that rutile（LC50（concentration that causes 50%mortality compared the control group）=6.5）was more toxic than anatase（LC₅0=278.8）under simulated sunlight（SSL）irradiation,possibly due to an extremely narrow band gap.It is noted that HA coating increased the toxicity of anatase,but decreased that of rutile.Additionally,AHA50 and RHA50had the biggest differences compared to uncoated anatase and rutile with LC₅0of 201.9 and21.6,respectively.We then investigated the formation of reactive oxygen species（ROS）by TiO₂ nanoparticles in terms of hydroxyl radicals（OH）and superoxide anions（O₂^-）.Data suggested that O₂^- was the main ROS that accounted for the higher toxicity of rutile upon SSL irradiation.We also observed that HA coating decreased the generation of OH and O₂^- on rutile,but increased O₂^- formation on anatase.Results from TEM analysis also indicated that HA coated rutile tended to be attached to the surface of E.coli more than anatase.     

Interfacial mechanisms of heterogeneous Fenton reactions catalyzed by iron-based materials: A review

The heterogeneous Fenton reaction can generate highly reactive hydroxyl radicals(·OH)from reactions between recyclable solid catalysts and H_2O_2 at acidic or even circumneutral pH.Hence,it can effectively oxidize refractory organics in water or soils and has become a promising environmentally friendly treatment technology.Due to the complex reaction system,the mechanism behind heterogeneous Fenton reactions remains unresolved but fascinating,and is crucial for understanding Fenton chemistry and the development and application of efficient heterogeneous Fenton technologies.Iron-based materials usually possess high catalytic activity,low cost,negligible toxicity and easy recovery,and are a superior type of heterogeneous Fenton catalysts.Therefore,this article reviews the fundamental but important interfacial mechanisms of heterogeneous Fenton reactions catalyzed by iron-based materials..OH,hydroperoxyl radicals/superoxide anions(HO_2./O_2~-.)and high-valent iron are the three main types of reactive oxygen species(ROS),with different oxidation reactivity and selectivity.Based on the mechanisms of ROS generation,the interfacial mechanisms of heterogeneous Fenton systems can be classified as the homogeneous Fenton mechanism induced by surface-leached iron,the heterogeneous catalysis mechanism,and the heterogeneous reaction-induced homogeneous mechanism.Different heterogeneous Fenton systems catalyzed by characteristic iron-based materials are comprehensively reviewed.Finally,related future research directions are also suggested.     

Quantum chemical investigation on photodegradation mechanisms of sulfamethoxypyridazine with dissolved inorganic matter and hydroxyl radical

Sulfamethoxypyridazine(SMP) is one of the commonly used sulfonamide antibiotics(SAs).SAs are mainly studied to undergo triplet-sensitized photodegradation in water under natural sunlight with other coexisting aquatic environmental organic pollutants.In this work,SMP was selected as a representative of SAs.We studied the mechanisms of triplet-sensitized photodegradation of SMP and the influence of selected dissolved inorganic matter,i.e.,anions(Br~-,Cl~-,and NO~-_3) and cations ions(Ca~(2+),Mg~(2+),and Zn~(2+)) on SMP photodegradation mechanism by quantum chemical methods.In addition,the degradation mechanisms of SMP by hydroxyl radical(OH·) were also investigated.The creation of SO_2 extrusion product was accessed with two different energy pathways(pathway-1 and pathway-2) by following two steps(step-I and step-II) in the tripletsensitized photodegradation of SMP.Due to low activation energy,the pathway-1 was considered as the main pathway to obtain SO_2 extrusion product.Step-II of pathway-1 was measured to be the rate-limiting step(RLS) of SMP photodegradation mechanism and the effect of the selected anions and cations was estimated for this step.All selected anions and cations promoted photodegradation of SMP by dropping the activation energy of pathway-1.The estimated low activation energies of different degradation pathways of SMP with OH·radical indicate that OH·radical is a very powerful oxidizing agent for SMP degradation via attack through benzene derivative and pyridazine derivative ring.     

Multiple transformation pathways of p-arsanilic acid to inorganic arsenic species in water during UV disinfection

p-Arsanilic acid(p-ASA) is widely used in China as livestock and poultry feed additive for promoting animal growth.The use of organoarsenics poses a potential threat to the environment because it is mostly excreted by animals in its original form and can be transformed by UV–Vis light excitation.This work examined the initial rate and efficiency of p-ASA phototransformation under UV-C disinfection lamp.Several factors influencing p-ASA phototransformation,namely,p H,initial concentration,temperature,as well as the presence of Na Cl,NH4+,and humic acid,were investigated.Quenching experiments and LC–MS were performed to investigate the mechanism of p-ASA phototransformation.Results show that p-ASA was decomposed to inorganic arsenic(including As(Ⅲ) and As(V))and aromatic products by UV-C light through direct photolysis and indirect oxidation.The oxidation efficency of p-ASA by direct photosis was about 32%,and those by HOU and1O2 were 19% and 49%,respectively.Cleavage of the arsenic–benzene bond through direct photolysis,HOU oxidation or1O2 oxidation results in simultaneous formation of inorganic As(Ⅲ),As(IV),and As(V).Inorganic As(Ⅲ) is oxidized to As(IV) and then to As(V) by1O2 or HOU.As(IV) can undergo dismutation or simply react with oxygen to produce As(V) as well.Reactions of the organic moieties of p-ASA produce aniline,aminophenol and azobenzene derivatives as main products.The photoconvertible property of p-ASA implies that UV disinfection of wastewaters from poultry and swine farms containing p-ASA poses a potential threat to the ecosystem,especially agricultural environments.     

Assessing the effect of different natural dissolved organic matters on the cytotoxicity of titanium dioxide nanoparticles with bacteria

Titanium dioxide nanoparticles(TiO_2 NPs) are among the most widely manufactured nanomaterials on a global scale. However, prudent and vigilant surveillance, incumbent upon the scientific community with the advent of new technologies, has revealed potentially undesirable effects of TiO_2 NPs on biological systems and the natural environment during their application and discharge. Such effects are likely best evaluated by first assessing the fate of the TiO_2 NPs in natural environments. In this study, the effects of terrestrial humic acid(HA) and tannic acid(TA), two major members of the collective:dissolved organic matter(DOM), on the cytotoxicity of TiO_2 NPs to Escherichia coli were investigated in the presence and absence of natural sunlight. Qualitative(transmission electron microscopy(TEM)) and quantitative(LC50) analyses were employed in this study. In addition, the production of reactive oxygen species(ROS) in the form of UOH was further assessed—as HA or TA increased the production of ROS decreased. The inhibition of bacterial viability in the light treatment groups, with respective treatment organics at concentrations of 10 ppm, was less in TA than in terrestrial HA. SAS was used to analyze the treatment effect of individual factors of light irradiation, DOM, and concentration of TiO_2 NPs.     

Gamma irradiation of 2-mercaptobenzothiazole aqueous solution in the presence of persulfate

Recently, water treatment by ionizing radiation has gained increasing attention as a powerful technology for the destruction of refractory pollutants. 2-Mercaptobenzothiazole(MBT) is known as a widespread, toxic and poorly biodegradable pollutant. This paper studied the gamma irradiation of aqueous solutions of MBT. Moreover, the effect of the addition of persulfate(S2O82-) on the radiolytic destruction of MBT was investigated. The main transformation products of the studied compound were detected and the sequence of occurrence of the products was described. The change of biodegradability of MBT solution was also observed. The main results obtained in this study indicated that gamma radiation was effective for removing MBT in aqueous solution. Persulfate addition, which induced the formation of reactive sulfate radicals(SO4-U), greatly enhanced the degradation of MBT. Benzothiazole was identified as the first radiation product, followed by 2-hydroxybenzothiazole. Decomposition of MBT started with the oxidation of –SH groups to sulfate ions. Possible pathways for MBT decomposition by gamma irradiation were proposed. The BOD/COD ratios of MBT samples were increased after radiation,indicating the improvement of biodegradability and reduction of toxicity.     

From illite/smectite clay to mesoporous silicate adsorbent for efficient removal of chlortetracycline from water

A series of mesoporous silicate adsorbents with superior adsorption performance for hazardous chlortetracycline(CTC) were sucessfully prepared via a facile one-pot hydrothermal reaction using low-cost illite/smectite(IS) clay,sodium silicate and magnesium sulfate as the starting materials.In this process,IS clay was "teared up" and then "rebuilt" as new porous silicate adsorbent with high specific surface area of 363.52 m~2/g(about 8.7 folds higher than that of IS clay) and very negative Zeta potential(- 34.5 mV).The inert Si- O- Si(Mg,Al) bonds in crystal framework of IS were broken to form Si(Al)- O~- groups with good adsorption activity,which greatly increased the adsorption sites served for holding much CTC molecules.Systematic evaluation on adsorption properties reveals the optimal silicate adsorbent can adsorb 408.81 mg/g of CTC(only 159.7 mg/g for raw IS clay) and remove 99.3%(only 46.5%for raw IS clay) of CTC from 100 mg/L initial solution(pH 3.51;adsorption temperature 30℃;adsorbent dosage,3 g/L).The adsorption behaviors of CTC onto the adsorbent follows the Langmuir isotherm model,Temkin equation and pseudo second-order kinetic model.The mesopore adsorption,electrostatic attraction and chemical association mainly contribute to the enhanced adsorption properties.As a whole,the high-efficient silicate adsorbent could be candidates to remove CTC from the wastewater with high amounts of CTC.     

Reuse of Fenton sludge as an iron source for NiFe2O4 synthesis and its application in the Fenton-based process

The potentially hazardous iron-containing sludge from the Fenton process requires proper treatment and disposal, which often results in high treatment cost. In this study, a novel method for the reuse of Fenton sludge as an iron source for the synthesis of nickel ferrite particles(NiFe_2O_4) is proposed. Through a co-precipitation method followed by sintering at 800°C, magnetic NiFe_2O_4 particles were successfully synthesized, which was confirmed by powder X-ray diffraction(XRD), scanning electronic microscopy(SEM), energy dispersive spectroscopy(EDS), Fourier transform infrared spectroscopy(FT-IR) and Raman spectroscopy. The synthesized NiFe_2O_4 could be used as an efficient catalyst in the heterogeneous Fenton process. In phenol degradation with H_2O_2 or NiFe_2O_4 alone, the phenol removal efficiencies within the reaction time of 330 min were as low as 5.9% ± 0.1% and 13.5% ±0.4%, respectively. However, in the presence of both NiFe_2O_4 and H_2O_2, phenol removal efficiency as high as 95% ± 3.4% could be achieved, indicating the excellent catalytic performance of NiFe_2O_4 in the heterogeneous Fenton process. Notably, a rapid electron exchange between_Ni II and_Fe III ions in the NiFe_2O_4 structure could be beneficial for the Fenton reaction. In addition, the magnetic catalyst was relatively stable, highly active and recoverable, and has potential applications in the Fenton process for organic pollutant removal.     

Activated carbon coated palygorskite as adsorbent by activation and its adsorption for methylene blue

An activation process for developing the surface and porous structure of palygorskite/carbon(PG/C) nanocomposite using ZnC l2 as activating agent was investigated. The obtained activated PG/C was characterized by X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), field-emission scanning electron microscopy(SEM), and Brunauer–Emmett–Teller analysis(BET) techniques. The effects of activation conditions were examined,including activation temperature and impregnation ratio. With increased temperature and impregnation ratio, the collapse of the palygorskite crystal structure was found to accelerate and the carbon coated on the surface underwent further carbonization. XRD and SEM data confirmed that the palygorskite structure was destroyed and the carbon structure was developed during activation. The presence of the characteristic absorption peaks of C_C and C–H vibrations in the FTIR spectra suggested the occurrence of aromatization. The BET surface area improved by more than 11-fold(1201 m2/g for activated PG/C vs. 106 m2/g for PG/C) after activation, and the material appeared to be mainly microporous. The maximum adsorption capacity of methylene blue onto the activated PG/C reached 351 mg/g. The activated PG/C demonstrated better compressive strength than activated carbon without palygorskite clay.     

Carbamazepine degradation by heterogeneous activation of peroxymonosulfate with lanthanum cobaltite perovskite: Performance, mechanism and toxicity

The widely used carbamazepine(CBZ) is one of the most persistent pharmaceuticals and suffers insufficient removal efficiency by conventional wastewater treatment.A synthesized Co-based perovskite(LaCoO_3) was used to activate peroxymonosulfate(PMS) in order to degrade CBZ.Results showed that LaCoO_3 exhibited an excellent performance in PMS activation and CBZ degradation at neutral pH,with low cobalt leaching.The results of FT-IR and XPS verified the high structurally and chemically stability of LaCoO_3 in PMS activation.Electron spin resonance(ESR) analysis suggested the generation of radical species,such as sulfate radicals(SO_4·~-) and hydroxyl radicals(·OH).Radical quenching experiments further revealed the responsibility of SO_4·~-as the dominant oxidant for CBZ oxidation.Ten products were detected via the oxidation of CBZ,with the olefinic double bond attacked by SO_4·~-as the initial step.Hydroxylation,hydrolysis,cyclization and dehydration were involved along the transformation of CBZ.The toxicity of CBZ solution was significantly reduced after treating by PMS/LaCoO_3.