Zn系LDHs负载改性石英砂和沸石对Cr(Ⅵ)吸附效果对比及其作用机理研究

为提升人工湿地常用填料对受污染水体中Cr(VI)的吸附性能,采用水热-共沉淀法在碱性条件下制备了Zn系LDHs涂层负载改性沸石和石英砂填料,并运用场发射扫描电子显微镜(SEM)、能谱分析仪(EDS)和BET等手段对改性前后填料的表面形态和化学成分进行了表征.最后,通过等温吸附试验、动力学吸附试验、吸附热力学试验对Zn系LDHs改性填料和天然填料的Cr(VI)吸附效果及其作用机理进行了对比研究.结果表明,通过Zn系LDHs涂层负载,沸石和石英砂对Cr(VI)的吸附类型由以物理吸附为主的多分子层吸附向以化学吸附为主的单分子层吸附转换,有利于吸附水中的Cr(VI);热力学相关参数ΔS~00,ΔG~00,ΔH~00,表明对Cr(VI)的吸附是自发放热过程.相比于天然沸石和石英砂,Zn系LDHs负载改性沸石和石英砂的表面物化性状发生明显变化,最大饱和吸附容量明显提高,尤其是石英砂的最大饱和吸附容量从21 mg·kg~(-1)提升到125 mg·kg~(-1).改性同种天然填料时,ZnAl-LDHs负载改性的效果更佳;而相对于天然沸石的改性,Zn系LDHs负载改性能更有效地提高石英砂对Cr(VI)的吸附能力.因此,本实验中ZnAl-LDHs负载改性石英砂可推荐用于实际人工湿地中Cr(VI)的去除.     

改性废报纸纤维对水中Cr(Ⅵ)的吸附研究

利用环氧氯丙烷与三甲胺对废报纸纤维进行改性制备阴离子吸附材料(CWNF),通过傅里叶变换红外光谱(FT-IR)、扫描电镜(SEM)、能谱(EDS)、热重分析(TGA)、比表面积(BET)对改性前后废报纸纤维进行表征,并研究其去除水中六价铬离子Cr(VI)的性能.结果表明,改性后废报纸纤维(CWNF)对Cr(VI)的吸附能力显著提高.当CWNF投加量为1g/L,溶液pH为1时,对100mg/L Cr(VI)的最大吸附量为38.66mg/g,平衡时间为60min,比改性前废报纸纤维(WNF)的吸附量(24.18mg/g)提高了59.88%.Langmuir与Freundlich等温吸附方程均能较好地描述CWNF对Cr(VI)的吸附特性,吸附动力学更符合拟二级速率方程.     

铁钛改性膨润土对铬的吸附性能研究

通过X-荧光分析I、R光谱分析、X射线衍射分析、扫描电镜分析手段对制备的铁钛改性膨润土进行了结构分析。研究了吸附剂用量、溶液pH、吸附时间等因素对Cr(VI)吸附行为的影响,比较了去除效果。结果表明:铁钛改性膨润土去除Cr(VI)的工艺条件为:吸附剂用量为6g/L,pH=3,吸附时间为15min,改性土对Cr(VI)的去除能力明显优于原土,处理Cr(VI)浓度为22mg/L左右的电镀废水,Cr(VI)去除率均在99%以上,残留Cr(VI)浓度低于国家综合排放标准(0.5mg/L)。     

草酸改性杨树叶对六价铬的吸附性能

利用草酸改性杨树叶为试验材料,对溶液中六价铬进行吸附去除。试验结果表明:当p H=2,吸附剂剂量为0.3 g,反应时间为120 min时,该材料对50 m L浓度为50 mg/L含铬废水的去除率达99.1%;伪二级动力学方程能较好地拟合该材料对Cr(VI)的吸附动力学过程,揭示其吸附主要是离子交换吸附;Langmuir方程能较好模拟该材料对Cr(VI)的等温吸附过程,表明其吸附主要是单分子层吸附,最大吸附量为40.91 mg/g。热力学研究表明,Cr(VI)在该材料表面的吸附是一个自发、吸热的物理吸附过程。     

油菜秸杆外壳对水溶液中六价铬的吸附作用

为探讨油菜秸秆外壳去除水溶液中重金属铬的可能性及其影响因素,并研究其吸附性能和吸附机制.采用Box-Behnken Design实验设计研究了水溶液中六价铬[Cr(VI)]初始浓度、pH值范围、油菜秸秆外壳添加量和吸附温度4个因素对油菜秸秆外壳去除溶液中Cr(VI)的影响作用;用吸附等温方程、吸附动力学方程与热力学方程分别探讨了油菜秸秆外壳去除水溶液中Cr(VI)的行为;采用红外光谱技术对油菜秸秆外壳吸附水溶液Cr(VI)前后进行表征,探讨其吸附机制.油菜秸秆外壳去除溶液中Cr(VI)的最佳条件组合为:在吸附时间为1440min时,Cr(VI)初始浓度为99.15mg/L、pH值为1.01、油菜秸秆外壳添加量为2.90g/L和吸附温度35.70℃,Cr(VI)去除率为91.97%;吸附等温线拟合,吸附Cr(VI)行为符合Freundlich方程,为优惠吸附;热力学研究表明:溶液中Cr(VI)吸附属吸热反应,且为自发吸附行为;吸附动力学显示:油菜秸秆外壳去除溶液Cr(VI)符合准二阶动力学方程,吸附过程中存在离子交换;红外光谱提示:吸附过程中,O—H、C—H、NH3+、N—H和C—O基团与Cr(VI) 络合吸附发挥了重要作用.油菜秸秆外壳能够有效吸附水溶液中的Cr(VI),pH值是最为重要的影响因素.     

煤渣—沸石复合球的制备及其对氨氮和COD_(Cr)的吸附研究

研制了煤渣-沸石复合多孔介质材料用于去除苇田养殖水体中的氨氮和COD_(Cr)。通过材料中煤渣、沸石不同配比对吸附效果的影响实验,确定了其配比为2:1。进而以吸附实验探讨了该材料对水中氨氮和COD_(Cr)的吸附性能。结果表明,该材料对氨氮和COD_(Cr)的吸附过程可用伪二级动力学方程和Langmuir等温方程描述;在25℃条件下,通过Langmuir吸附等温方程拟合出的最大吸附量分别为0.271 mg/g、0.680 mg/g,而吸附速率主要受到边界层扩散和内扩散的控制。该材料对实际水体的吸附效果显示,在不同COD_(Cr)浓度条件下其对氨氮的去除有着较好的稳定性,对COD_(Cr)的去除效率随着COD_(Cr)初始浓度的增大稍有增加。     

净水污泥负载零价纳米铁去除水中Cr(VI)

以净水污泥为原料,采用NaBH_4液相还原Fe(NO_3)_3·9H_2O的方法制备了净水污泥负载零价纳米铁(WS-nZVI)吸附剂,并用于去除含铬废水中的Cr(VI)。考察了Cr(VI)溶液的pH值、WS-nZVI投加量、Cr(VI)溶液初始浓度等因素对WS-nZVI去除Cr(VI)的效果影响,同时与还原铁粉、原泥进行了去除Cr(VI)的对比实验。采用SEM、BET、XRD和FTIR对WS-nZVI进行表征。实验结果表明:WS-nZVI去除Cr(VI)的效果要好于还原铁粉和原泥,当作用时间为3.5 h,WS-nZVI投加量为10 g/L时对Cr(VI)的去除效果最佳。利用净水污泥的吸附性能和零价纳米铁的还原性能协同作用,可将溶液中Cr(VI)还原为Cr(III)后吸附去除。     

不同类型沸石对水中CdⅡ的吸附去除作用比较

利用天然沸石及其改性后的H型沸石、Na型沸石研究比较了对水中Cd(的吸附去除作用和效果,并比较了改性前后沸石的孔径分布。结果表明:改性H型沸石与Na型沸石对水中CdⅡ的去除效果优于天然沸石。在初始Cd(浓度50mg/L、初始pH 1~8、沸石用量30g/L,150r/min搅拌吸附35min的条件下,两种改性沸石对水中Cd(的去除率接近100%,而天然沸石仅为92%以上。改性后H型沸石的平均微孔为8.6601×10-10m,平均孔径为51.3335×10-10m;Na型沸石的平均微孔孔径为9.8433×10-10m,平均孔径为54.9011×10-10m,而天然沸石平均微孔仅为6.9181×10-10m,平均孔径仅为34.8345×10-10m。改性沸石孔径的增大,增强了对水中Cd(的吸附去除作用。     

改性人造沸石处理含黄玉铬洁(Ⅵ张焕)祯地下水的实验研究

为了提高人造沸石对地下水中铬(Ⅵ)的去除能力,采用氯化铝对人造沸石进行改性。确定最佳改性条件:20%氯化铝溶液,液固比12 mL/g,室温下以180 r/min振荡改性8 h;最佳除Cr(Ⅵ)条件:pH值为4～8,液固比为33.3 mL/g,室温下水浴恒温振荡2 h。改性沸石对铬(Ⅵ)的吸附符合Langmuir及Freundlich等温线方程,由Langmuir吸附等温线可得其吸附容量为5.624 mg/g。在最佳反应条件下,水样中铬(Ⅵ)浓度可由5 mg/L下降到0.026 mg/L,低于0.05 mg/L,满足GB/T 14848—93《地下水环境质量标准》Ⅲ类标准。     

壳聚糖/改性平菇复合吸附剂对Cr(VI)的吸附特性

以壳聚糖和经酒石酸改性的平菇粉末为材料,通过戊二醛进行交联反应,制得壳聚糖-改性平菇凝胶小球（CMPOD）复合生物吸附剂,用于水溶液中Cr（VI）的吸附去除.结果表明,在实验所测pH值（2~10）范围内,复合吸附剂对Cr（VI）的吸附量随着pH值上升而降低;随着Cr（VI）初始浓度或温度的提高,吸附剂对Cr（VI）的吸附量均相应增加,当Cr（VI）初始浓度为600mg/L,温度为50℃,Cr（VI）吸附量可达190mg/g以上;Cr（VI）的吸附符合准二级动力学方程及Freundlich等温吸附模型;热力学分析表明,吸附剂对Cr（VI）的吸附过程为自发的吸热反应.扫描电镜（SEM）分析显示,吸附剂具有发达的网状结构,吸附Cr（VI）后网状孔隙被填充,且能谱分析（EDS）出现明显的Cr（VI）吸收峰;傅立叶红外光谱分析（FTIR）表明,壳聚糖中的氨基成功引入复合吸附剂中,在Cr（VI）吸附中为主要作用官能团.     

桉树遗态Fe/C复合材料对水中Cr(Ⅵ)的动态吸附探讨

为研究桉树遗态Fe/C复合材料（PBGC-Fe/C）对水中Cr（Ⅵ）的净化能力及其动态吸附过程,以PBGC-Fe/C吸附剂为固定床,选择溶液初始pH、进水流速、溶液初始浓度、吸附剂投加量和环境温度为影响因素开展动态吸附试验分析.结果表明:在溶液初始pH为2,进水流速为5.14 mL/min,吸附剂投加量为2 g和环境温度为35℃的条件下,PBGC-Fe/C对水中Cr（Ⅵ）的最佳平衡吸附容量达到10.72 mg/g;提高溶液初始pH、进水流速和溶液初始质量浓度或降低吸附剂投加量均可缩短反应穿透时间和衰竭时间;Thomas和Yoon-Nelson模型均能较好地描述PBGC-Fe/C对水中Cr（Ⅵ）的动态吸附过程,说明该吸附过程中内部扩散和外部扩散均为非限速步骤,吸附速率常数（k_Th）随着进水流速的增大从1.3×10-3 mL/（min·mg）升至2.6×10-3 mL/（min·mg）,随着溶液初始质量浓度的增大从2.7×10-3 mL/（min·mg）降至1.4×10-3 mL/（min·mg）.研究显示,PBGC-Fe/C对水中Cr（Ⅵ）具有较好的动态吸附能力,具有较好的市场应用前景.      

硫酸根离子强化零价铁去除Cr(Ⅵ)的试验研究

普通零价铁去除Cr（VI）的反应活性较低且Cr（VI）会导致零价铁较快钝化.通过连续流实验,研究了硫酸根离子提高零价铁去除水中Cr（Ⅵ）的可行性与反应机理.实验结果表明,在未加入硫酸根离子时,运行5.5h后柱子出水总铬及Cr（VI）已开始超出饮用水标准.而在加入1~3mmol/L SO₄^2-后,出水总铬及Cr（VI）持续降低,并最终降至饮用水水质标准以下且稳定运行长达240h以上.XPS分析结果表明,还原作用是零价铁除Cr（Ⅵ）的主要机理,硫酸根离子加速了零价铁的腐蚀进而促进了Cr（VI）的去除.     

Cr(VI) removal from aqueous solution with bamboo charcoal chemically modified by iron and cobalt with the assistance of microwave

Bamboo charcoal (BC) was used as starting material to prepare Co-Fe binary oxideloaded adsorbent (Co-Fe-MBC) through its impregnation in Co(NO3)2 , FeCl3 and HNO3 solutions simultaneously, followed by microwave heating. The low-cost composite was characterized and used as an adsorbent for Cr(VI) removal from water. The results showed that a cobalt and iron binary oxide (CoFe2O4 ) was uniformly formed on the BC through redox reactions. The composite exhibited higher surface area (331 m2/g) than that of BC or BC loaded with Fe alone (Fe-MBC). The adsorption of Cr(VI) strongly depended on solution pH, temperature and ionic strength. The adsorption isotherms followed the Langmuir isotherm model well, and the maximum adsorption capacities for Cr(VI) at 288 K and pH 5.0 were 35.7 and 51.7 mg/g for Fe-MBC and Co-Fe-MBC, respectively. The adsorption processes were well fitted by the pseudo second-order kinetic model. Thermodynamic parameters showed that the adsorption of Cr(VI) onto both adsorbents was feasible, spontaneous, and exothermic under the studied conditions. The spent Co-Fe-MBC could be readily regenerated for reuse.     

Weak magnetic field accelerates chromate removal by zero-valent iron

Weak magnetic field(WMF) was employed to improve the removal of Cr(VI) by zero-valent iron(ZVI) for the first time. The removal rate of Cr(VI) was elevated by a factor of 1.12–5.89 due to the application of a WMF, and the WMF-induced improvement was more remarkable at higher Cr(VI) concentration and higher p H. Fe2+was not detected until Cr(VI) was exhausted, and there was a positive correlation between the WMF-induced promotion factor of Cr(VI) removal rate and that of Fe2+release rate in the absence of Cr(VI) at pH 4.0–5.5. These phenomena imply that ZVI corrosion with Fe2+release was the limiting step in the process of Cr(VI) removal. The superimposed WMF had negligible influence on the apparent activation energy of Cr(VI) removal by ZVI, indicating that WMF accelerated Cr(VI)removal by ZVI but did not change the mechanism. The passive layer formed with WMF was much more porous than without WMF, thereby facilitating mass transport. Therefore,WMF could accelerate ZVI corrosion and alleviate the detrimental effects of the passive layer, resulting in more rapid removal of Cr(VI) by ZVI. Exploiting the magnetic memory of ZVI, a two-stage process consisting of a small reactor with WMF for ZVI magnetization and a large reactor for removing contaminants by magnetized ZVI can be employed as a new method of ZVI-mediated remediation.     

淀粉/ZVI-Ni-Cu三金属复合材料降解三氯乙烯和氯仿的效能

采用液相Na BH4还原法,制备出淀粉负载纳米铁镍双金属(淀粉/ZVI-Ni)和淀粉负载纳米铁镍铜三金属复合材料(淀粉/ZVI-Ni-Cu),并采用XRD、SEM、BET、XRF等仪器对其性能进行表征;进而对比其与纳米零价铁(ZVI)、淀粉负载零价铁(淀粉/ZVI)对三氯乙烯和氯仿的降解效果及影响淀粉/ZVI-Ni-Cu降解氯代烃的因素.结果表明:通过双金属和三金属的掺杂,可有效提高复合材料对氯代烃的降解,其降解效能关系为:淀粉/ZVI-Ni-Cu淀粉/ZVI-Ni/淀粉/ZVIZVI.其中淀粉/ZVI-Ni-Cu三金属复合材料在48 h内可实现氯代烃的完全降解.由于淀粉载体的加入,使得纳米金属材料成功地负载在淀粉上,复合材料的抗氧化性增强了,降解效果也更稳定可靠.     

Synthesis of a novel illite@carbon nanocomposite adsorbent for removal of Cr(VI) from wastewater

A novel illite@carbon (I@C) nanocomposite adsorbent has been synthesized via a facile hydrothermal carbonization process (HTC) using glucose as carbonaceous source and illite as the carrier. The morphology, microstructure and surface properties of the prepared nanocomposite adsorbent were analyzed by FESEM, TGA, XRD, FT-IR and Zeta potential measurements. Batch experiments were carried out on the adsorption of Cr(VI) to determine the adsorption properties of the composite. The adsorption of Cr(VI) onto the I@C nanocomposite was well described by the pseudo-second-order kinetic model and Langmuir isotherm. Compared with the illite and carbon material (SC) separately, the prepared I@C nanocomposite adsorbent exhibited enhanced adsorption performance for Cr(VI) with a maximum adsorption capacity of 149.25 mg/g, which was higher than that of most reported adsorbents. In addition, the adsorption process was spontaneous and endothermic based on the adsorption thermodynamics study. The adsorption of Cr(VI) by I@C was highly pH-dependent and the optimum adsorption occurred at pH 2.0. The Zeta potential analysis results indicated that the electrostatic interactions between anionic Cr(VI) and the positively charged surface of the adsorbent might be critical to the adsorption mechanism. This study demonstrated that the I@C nanocomposite should be a promising candidate for a low-cost, environmental friendly and highly efficient adsorbent for the removal of toxic Cr(VI) from wastewater.     

纳米Fe3O4负载的浮游球衣菌去除Cr(Ⅵ)的研究

以纳米Fe₃O₄负载浮游球衣菌（Sphaerotilus natans）为复合生物吸附剂,考察了其对Cr(Ⅵ)的吸附性能,并对生物吸附机理进行了初步研究.结果表明,pH值是影响复合生物吸附剂吸附Cr(Ⅵ)的主要因素,吸附的最佳pH为2～3;用此复合生物吸附剂对Cr(Ⅵ)进行吸附,其单位吸附量为0.0217 mmol/g.用HCl对其进行再生,再生率在90％以上;—CONH₂和—NH—是菌体吸附Cr(Ⅵ)的主要活性基团,静电吸引是复合生物吸附剂吸附Cr(Ⅵ)的主要机理之一.     

沸石负载羟基氧化铁对铬（VI）吸附的固体浓度效应研究

本文利用沸石负载羟基氧化铁作吸附剂对六价铬进行吸附和解吸附实验。探讨了沸石负载羟基氧化铁对六价铬的吸附机制和固体浓度效应。实验结果表明：当吸附剂的用量从0.05g增加到0.2g时,在实验条件下,六价铬的吸附量从27999.493μg/g降低到8930.610μg/g,吸附剂对Cr6＋的吸附存在明显的固体浓度（Cs）效应。吸附滞后角随着Cs的增加而减小,吸附反应的可逆性增大。将实验数据分别用Languir和Freundlich吸附模型进行拟合,发现Freundlich吸附模型对实验数据拟合效果较好,表明该吸附反应以单分子层吸附为主。     

生物硫铁复合材料处理含铬废水及铬资源化研究

研究了由硫酸盐还原菌(SRB)与其原位生成的纳米硫铁化合物组成的生物硫铁复合材料(生物硫铁)的耐铬性能和再生性能,并利用其再生特性,设计了处理高浓度含铬废水及铬资源化的还原-再生循环处理工艺.结果表明,生物硫铁处理含铬废水后,污泥中的SRB仍具有活性,能以反应产物Fe3+和S单质为电子受体,重新生成生物硫铁;而且SRB在Cr(VI)浓度600mg/L的废水中仍能存活并逐渐将Cr(VI)去除.还原-再生循环处理工艺处理含铬废水结果表明,出水Cr(VI)低于0.019mg/L,总Cr低于0.929mg/L,能达标排放.经10个循环处理后污泥中铬(Cr2O3)含量达到40.47%,铬铁比达到6.98,污泥达到冶金级(湿法冶炼铬)铬矿标准和化工级铬矿标准,可资源化利用.