四环素光催化降解特性与选择性研究

研究了盐酸四环素的光催化降解行为,结果表明四环素光催化降解反应符合一级反应动力学方程,吸附过程为整个光催化降解的控制步骤,推断四环素的主要降解途径是吸附在二氧化钛(TiO2)表面发生光催化氧化反应.同时,通过对四环素与磺胺甲唑或阿莫西林混合样品的降解实验表明,改变pH、TiO2投加量等因素,两种抗生素的降解表现出了明显的选择性.     

WC/TiO2纳米复合界面光催化剂制备及其光催化降解酚类污染物研究

设计并制备了新型WC/TiO2纳米复合界面光催化剂应用于酚类污染物的光催化降解反应中.采用X射线衍射(XRD)和扫描电子显微镜(SEM)技术分析了WC/TiO2纳米复合界面光催化剂的晶型和表面形貌.结果显示锐钛矿型TiO2纳米颗粒均匀地分散在WC纳米球表面并很好地构筑了WC/TiO2界面.研究了不同WC负载比例的WC/TiO2光催化剂在模拟太阳光照射下降解苯酚的光催化性能.结果表明:WC/TiO2复合界面的形成可以有效地提高TiO2光催化降解性能;其中,3%WC/TiO2(质量分数)光催化降解苯酚的活性最高.利用紫外-可见光谱(UV-Vis)和高效液相色谱-质谱联用技术(HPLC-MS)分析了WC/TiO2纳米复合界面光催化剂降解苯酚的中间产物,提出了苯酚在WC/TiO2界面上可能的降解机理.     

Immobilization of self-assembled pre-dispersed nano-TiO2 onto montmorillonite and its photocatalytic activity

The immobilization of pre-dispersed Ti O_2 colloids onto the external surface of the clay mineral montmorillonite(Mt) was accomplished and regulated via a self-assembly method employing the cationic surfactant cetyltrimethylammonium bromide(CTAB). The role of CTAB in the synthesis process was investigated by preparing a series of Ti O_2-CTAB-Mt composites(TCM) with various CTAB doses. The results indicated that a uniform and continuous Ti O_2 film was deposited on the external surface of montmorillonite in the composite synthesized with 0.1 wt.% of CTAB, and the TCM nano-composites showed much higher values for specific surface area, average pore size and pore volume than the raw montmorillonite clay. Then, the formed TCM materials were applied in photocatalytic degradation of 2,4-dichlorophenol(2,4-DCP) in aqueous solution. The degradation efficiency reached as high as 94.7%. Based on the degradation intermediates benezoquinone, fumaric acid and oxalic acid identified by LC–MS analysis, a mechanism for the photocatalytic oxidation of 2,4-DCP on Ti O_2/Mt nano-composites is proposed.     

TiO2-PW9复合催化剂光催化降解游离氰

采用水热法制备了二氧化钛(TiO_2)与三缺位磷钨酸钠(Na_8H[β-A-PW_9O_(34)]·24H_2O)共价结合形成的TiO_2-PW_9复合催化剂,并对其光催化降解游离氰(CN~-)的效果进行了研究.NMR和XPS等表征结果证明,Na_8H[β-A-PW_9O_(34)]·24H_2O(简写为Na-PW_9)已成功负载于TiO_2上.光电化学表征结果表明,Na-PW_9的引入可有效提高TiO_2的界面电荷转移.光催化实验结果表明,与单独TiO_2相比,TiO_2-PW_9的光催化活性有明显提高.同时,探究了初始CN~-浓度和催化剂投加量对CN~-去除的影响.结果表明,当初始CN~-浓度为0.3 mmol·L~(-1)、催化剂投加量为1 g·L~(-1)时,复合催化剂的光催化活性最佳,反应150 min后,CN~-的去除率达到81%.CN~-的氧化产物分析结果表明,氰酸根(CNO~-)是CN~-氧化的唯一产物.自由基淬灭实验和电子自旋共振(ESR)波谱分析结果表明,~1O_2是反应体系中的主要活性氧物种.本实验可为多功能催化材料的开发及其在含氰废水污染控制领域的应用提供参考.     

Immobilization of self-assembled pre-dispersed nano-TiO2 onto montmorillonite and its photocatalytic activity

The immobilization of pre-dispersed TiO₂ colloids onto the external surface of the clay mineral montmorillonite (Mt) was accomplished and regulated via a self-assembly method employing the cationic surfactant cetyltrimethylammonium bromide (CTAB). The role of CTAB in the synthesis process was investigated by preparing a series of TiO₂-CTAB-Mt composites (TCM) with various CTAB doses. The results indicated that a uniform and continuous TiO₂ film was deposited on the external surface of montmorillonite in the composite synthesized with 0.1 wt.% of CTAB, and the TCM nano-composites showed much higher values for specific surface area, average pore size and pore volume than the raw montmorillonite clay. Then, the formed TCM materials were applied in photocatalytic degradation of 2,4-dichlorophenol (2,4-DCP) in aqueous solution. The degradation efficiency reached as high as 94.7%. Based on the degradation intermediates benezoquinone, fumaric acid and oxalic acid identified by LC–MS analysis, a mechanism for the photocatalytic oxidation of 2,4-DCP on TiO₂/Mt nano-composites is proposed.     

高度分散TiO2催化超声降解乙基紫及与悬浮TiO2催化活性的比较

采用输出功率为50 W,频率为40 kHz的超声波作为激发源激发TiO₂,比较了分散和悬浮2种不同形态TiO₂存在时超声降解乙基紫的情况.结果表明,在高度分散TiO₂存在的条件下,超声降解乙基紫的效果要远远好于悬浮TiO₂,超声照射40 min降解率达到78.45 %,而在悬浮TiO₂存在下降解率只有27.12 %,在单纯超声波作用下同样时间内降解率只有10%.另外还研究了不同因素包括：反应时间、初始浓度、催化剂加入量、超声功率和温度等对TiO₂催化超声降解乙基紫反应的影响,讨论了TiO₂催化超声降解乙基紫可能的反应机理.     

介质阻挡放电等离子协同TiO_2-GAC降解甲基橙的研究

采用介质阻挡放电(DBD)等离子协同颗粒活性炭负载TiO2(TiO2-GAC)对甲基橙进行降解,研究了该体系的协同处理效果,探讨了放电电压、初始pH、初始电导率、初始浓度和TiO2-GAC投加量等操作参数的影响,并建立了协同体系的表观反应动力学模型.实验结果表明,DBD与TiO2-GAC联合处理表现出明显的协同效应,处理25min后,协同体系对甲基橙的降解率和COD去除率分别为96.2%和90%,与单独DBD体系相比,分别提高了52.7%和50.4%;协同体系降解甲基橙的过程符合表观反应动力学模型,模型值与实验值吻合良好,总级数为2.352;体系中H2O2、O3浓度测定结果表明,与单独DBD体系对比,协同体系的H2O2浓度增高,而O3浓度降低,说明TiO2-GAC起到了催化作用;TiO2-GAC在DBD体系中获得了原位再生,五次再生循环后再生率达80%.     

CuO-TiO2/导电聚合物纤维复合材料的制备及其光催化性能

利用高压静电纺丝技术,制得含羧基的导电聚合物纤维(聚偏氟乙烯/苯乙烯-马来酸酐共聚物/纳米石墨).水热条件下在纤维表面原位合成了纳米级的TiO2,再通过水热法在TiO2表面制备了微米级的球形CuO颗粒,得到CuO-TiO2/导电聚合物纤维复合材料.运用扫描电子显微镜(SEM)、X射线衍射仪(XRD)、紫外-可见吸收光谱仪(UV-Vis)和热失重分析(TGA)对复合材料的结构与性能进行表征,并利用氙灯模拟太阳光进行光催化降解次甲基蓝实验.结果发现,CuO-TiO2/导电聚合物纤维复合材料的降解效率高于CuO-TiO2/非导电聚合物纤维、CuO-TiO2粉体和Degussa P25,光催化降解3.5h时,次甲基蓝的残留率为4.7％.     

Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.     

铜卟啉修饰In2TiO5纳米带的制备及其光催化性能

以5,10,15,20-四苯基铜卟啉（CuTPP）和5-（4-氨基苯基）-10,15,20-三苯基铜卟啉（CuAPTPP）为敏化剂,采用溶剂热法成功制备了铜卟啉敏化In₂TiO₅复合光催化剂.利用紫外、FT-IR、XRD、SEM、UV-vis DRS和N₂吸附脱附曲线对所得铜卟啉及复合光催化剂进行表征和分析.结果表明,铜卟啉负载于In₂TiO₅纳米带表面,复合光催化剂的禁带宽度及比表面积出现一定程度的减小,但未改变In₂TiO₅的晶型及形貌.其中,CuTPP敏化In₂TiO₅复合光催化剂的光催化活性最强,在模拟太阳光的照射下,120 min时罗丹明B（RhB）的降解率高达98.9%,而In₂TiO₅纳米带对RhB的降解率仅为33.5%,且循环使用5次后其光催化降解率仍保持在95%以上.     

BiOCl/TiO2的氯化改性及其新式光生自由基催化反应

采用溶胶凝胶法制备了BiOCl/TiO₂复合催化剂,透射电镜（TEM）照片显示,两种半导体分布均匀、相互连接,形成的异质结可以为电子传导提供有效通道.经过氯化处理的复合材料具备更强的光催化能力,在紫外光条件下对苯的降解率达到90%,是原BiOCl/TiO₂的2倍、纯TiO₂的10倍.本文利用X射线光电子能谱、红外光谱和电子顺磁共振,对表面氯化的机理进行研究.结果表明,氯元素以Ti—Cl的方式吸附在催化剂表面,在光照条件下光生空穴夺取一个电子,使其生成氯自由基,进而配合超氧、羟基,构成一种新型的三自由基光催化体系,使催化降解能力大幅提升.最后,利用实验方法得到了光生氯自由基的直接证据,并构建了该体系的光催化反应机理.     

TiO2-Fe3+可见光催化H2O2降解阿特拉津的协同效应

以内分泌干扰物阿特拉津为模型污染物,研究了TiO2-Fe3+可见光催化H2O2降解阿特拉津的协同效应.结果表明,在H2O2存在条件下,金红石TiO2经可见光激发可持续稳定地产生.OH自由基,在Fe3+协同作用下,.OH自由基生成量急剧增加;TiO2能可见光催化H2O2降解阿特拉津,金红石TiO2显示出较锐钛矿TiO2及混晶TiO2(TiO2P25)更高的催化活性,反应60 min,阿特拉津的降解率可达40%;以Fe3+协同TiO2可见光催化H2O2降解阿特拉津时,反应效率显著加快,反应5 min即对阿特拉津的降解率达到100%,而金红石TiO2显示出更为明显的协同效应.     

Photocatalytic degradation of 4-tert-octylphenol in a spiral photoreactor system

A spiral photoreactor system (SPS) was developed for the degradation of 4-tert-octylphenol (4-t-OP) in aqueous phase. 4-t-OP was previously considered as a endocrine disrupting compound frequently present in water. The direct photodegradation reaction caused by the SPS was found to accord with the characteristic of apparent first-order reaction with reaction rate constantk= 4.8 × 10^-2 min^-1. However, the direct photodegradation reaction could not make the 4-t-OP mineralized. The photodegradation efficiency increased from 88% to 91.2% in 45 min irradiation period after the internal surface of SPS was sintered with TiO₂ thin film as catalyst. Catalyst concentration, number of catalyst coating layers and initial concentration of 4-t-OP were proven to be the factors affecting the photocatalytic degradation performance of the SPS on aqueous 4-t-OP. The degradation mechanism was investigated and the byproducts were analyzed using total organic carbon analyzer (TOC) and LC-MS. The possible chemical structures of the products were suggested. SPS with single layer of TiO₂ prepared by sintering 13.6% of TiO₂ precursor was proven to be more efficient than most of previous systems for removal of 4-t-OP from aqueous phase. 28.3% of the 4-t-OP was mineralized in 45 min according to the decreased amount of TOC value.     

TiO2投加量及其表面载银量对光催化降解Aro-clor1260的影响

在紫外灯照射下,催化剂TiO₂的投入量及其表面载银量对光催化降解Aroclor1260有显著的影响.但TiO₂的投入量并不与Aroclor1260的降解速率成正比关系,而是有一个最佳投入量,在本文的实验条件下,这个最佳值为60mg(3g/L).TiO2的表面载银量越多,Aroclor1260的降解速率也越大,而且浓度相对较高的PCB单体化合物的降解速率大于浓度相对较低的PCB单体化合物的降解速率.对于多数PCB单体化合物而言,TiO₂的催化活性随其表面载银量的增加而增强.     

Photoelectrocatalytic degradation of high COD dipterex pesticide by using TiO2/Ni photo electrode

A TiO₂ thin film electrode deposited on porous nickel net (TiO₂/Ni) was prepared by the sol-gel method, and the surface morphology, crystal structure features and the grain size were characterized by Field emission scan electron microscopy (FESEM) and X-ray diffraction (XRD). The photoelectrocatalytic system was set up using a UV high-pressure mercury lamp as the light source, TiO₂ coated on foamed nickel as photo anode, Pt sheet as counter electrode and the pesticide dipterex in synthetic wastewater. Various factors that influence the photoelectrocatalytic decomposition of dipterex pesticide have been studied, such as degradation time, the type of electrolyte, current density, original pH value and different degradation methods. The prepared catalysts were employed to photoelectrocatalytically degrade the pesticide dipterex under UV irradiation, comparing the results with photocatalytic degradation and electrochemical oxidation. The results indicated that under the optimal conditions of 0.02 mol/L NaCl as the supporting electrolyte, current density = 2.5 mA/cm², pH 6.0 and dipterex pesticide 40 mg/L, and reaction time 2 hr, dipterex chemical oxygen demand (COD) removal rate and organophosphorous conversion of up to 82.6% and 83.5% were achieved, respectively. The method of photoelectrocatalytic degradation is more efficient than photocatalysis and electrochemical oxidation. The possible roles of the electrolytes on the reactions and probable mechanisms were also discussed.     

TiO2光催化联合技术降解苯酚机制及动力学

主要研究了TiO2光催化体系结合H2O2或外加电催化(EC)体系对苯酚催化降解效率的影响,评价比较TiO2/UV、H2O2/UV、TiO2/UV/H2O2、TiO2/UV/EC体系下苯酚降解机制及动力学.结果表明,TiO2/UV/H2O2和TiO2/UV/EC体系下苯酚降解效率明显高于TiO2/UV体系,当苯酚溶液pH值为6,TiO2质量浓度0.2 g·L-1,紫外光照2 h,光催化降解效果达到86%,当电流密度为12 mA·cm-2,则苯酚可达到100%去除.比较了不同催化体系下的能量利用率,苯酚降解15 min,TiO2/UV/EC体系能量利用率最大为0.030 6 g·(kW·h)-1,其能量消耗为0.0640 kW·h-1,说明采用TiO2/UV/EC体系能更多地利用能量降解苯酚.通过不同催化体系下中间产物分析,建立苯酚及其中间产物对苯二酚、邻苯二酚和苯醌的拟一级降解动力学模型,通过模型验证各催化体系下苯酚的降解历程,同时也说明了TiO2/UV/EC体系有利于苯酚及其中间产物的降解.     

钯掺TiO2光催化降解全氟辛酸

全氟辛酸(perfluorooctanoic acid,PFOA)以其分布广泛性、生物蓄积性、生物毒性强而成为全球关注的一种新型持久性有机污染物.采用化学还原法制备钯掺二氧化钛(Pd-Ti O2)催化剂,利用XRD、FESEM、UV-vis DRS对催化剂进行表征,并考察其在365 nm紫外光照射下对PFOA的光催化降解效果.结果表明,化学还原的制备方法使Ti O2粒径减小、比表面积增大且对紫外光的吸收性能增大,但并不引起PFOA光催化效果的改变.而Pd掺杂后大大增强了PFOA的降解效果,反应7 h后溶液中氟离子浓度为6.62 mg·L-1,是Ti O2(P25)的7.3倍.投加俘获剂与通入氮气的实验证明,在PFOA的降解过程中·OH起重要作用,氧气的存在可促进PFOA的降解.采用UPLC-QTOF-MS对产物进行鉴定分析,PFOA的可能降解过程是经h+氧化后发生脱羧基反应,产生的全氟烷烃自由基(·CnF2n+1)被·OH氧化,脱氟生成短链全氟羧酸.Pd能作为电子(e-)捕获剂、加速e-向O2等电子受体的转移,从而缓解e-累积,提高对PFOA的降解效果.     

SiO2纳米颗粒内嵌强化介孔TiO2单晶光催化降解盐酸四环素

吸附性能和光生载流子的分离效率是决定光催化降解抗生素的主要因素.为提高介孔TiO_2单晶(MSCs)的吸附性能和光生载流子的分离效率,在MSCs内部构建SiO_2纳米颗粒吸附结构.同时,利用表面光电压谱、氮气等温吸附-脱附、X射线衍射等研究其结构特性.最后,以盐酸四环素为抗生素代表,通过控制SiO_2纳米颗粒比表面积,考察SiO_2对复合材料吸附及光催化性能的影响.结果表明,SiO_2纳米颗粒与TiO_2单晶复合显著提高了材料的吸附性能,表面保护蚀刻进一步提升了材料的比表面积.实验条件下,高比表面积SiO_2-TiO_2单晶复合材料(KSiO_2@TiO_2)对盐酸四环素的平衡吸附量、降解效率、降解速率常数和矿化率分别达到了0.96 mg·g-1、90.2%、0.0079 min-1、54.4%,分别是MSCs的4.4、1.5、2.6和3.1倍.副产物分析表明,SiO_2复合介孔单晶材料更易将盐酸四环素降解为小分子物质.     

Reaction site and mechanism in the UV or visible light induced TiO2 photodegradation of Orange G

For TiO2 heterogeneous reaction, the reaction site and the detailed mechanism are interesting and controversy topics. In this paper, effects of surface fluorination of TiO2 on the photocatalytic degradation of an azo dye, Orange G（OG） under UV or visible light irradiation were investigated, and the possible reaction site and mechanism were elucidated. The adsorption of OG on TiO2 was nearly inhibited by fluoride but its UV light induced photodegradation rate was greatly increased by a factor of about 2.7, which was due to the more generated free hydroxyl radicals. It supported the views that fluoride could desorb the oxidant species from surface and that the reaction sites could move to the bulk solution. In TiO2/Vis system, the observed inhibition effects of fluorination could be interpreted by the competitive adsorption, which provided additional evidences that the visible light sensitized photodegradation of dye pollutants on the catalyst surface.     

Photocatalytic degradation of phenanthrene on soil surfaces in the presence of nanometer anatase TiO2 under UV-light

The effect of nanometer anatase TiO₂ was investigated on the photocatalytic degradation of phenanthrene on soil surfaces under a variety of conditions. After being spiked with phenanthrene, soil samples loaded with different amounts of TiO₂ (0 wt.%, 1 wt.%, 2 wt.%, 3 wt.%, and 4 wt.%) were exposed to UV-light irradiation for 25 hr. The results indicated that the photocatalytic degradation of phenanthrene followed the pseudo first-order kinetics. TiO₂ significantly accelerated the degradation of phenanthrene with the half-life reduced from 45.90 to 31.36 hr for TiO₂ loading of 0 wt.% and 4 wt.%, respectively. In addition, the effects of H₂O₂, light intensity and humic acid on the degradation of phenanthrene were investigated. The degradation of phenanthrene increased with the concentration of H₂O₂, light intensity and the concentration of humic acids. It has been demonstrated that the photocatalytic method in the presence of nanometer anatase TiO₂ was a very promising technology for the treatments of soil polluted with organic substances in the future.