首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 18 毫秒
1.
α-MnO_2 nanotubes and their supported Au-Pd alloy nanocatalysts were prepared using hydrothermal and polyvinyl alcohol-protected reduction methods, respectively. Their catalytic activity for the oxidation of toluene/m-xylene, acetone/ethyl acetate, acetone/m-xylene and ethyl acetate/m-xylene mixtures was evaluated. It was found that the interaction between Au-Pd alloy nanoparticles and α-MnO_2 nanotubes significantly improved the reactivity of lattice oxygen, and the 0.91 wt.% Au0.48 Pd/α-MnO_2 nanotube catalyst outperformed the α-MnO_2 nanotube catalyst in the oxidation of toluene, m-xylene, ethyl acetate and acetone. Over the0.91 wt.% Au0.48 Pd/α-MnO_2 nanotube catalyst,(i) toluene oxidation was greatly inhibited in the toluene/m-xylene mixture, while m-xylene oxidation was not influenced;(ii) acetone and ethyl acetate oxidation suffered a minor impact in the acetone/ethyl acetate mixture; and(iii) m-xylene oxidation was enhanced whereas the oxidation of the oxygenated VOCs(volatile organic compounds) was suppressed in the acetone/m-xylene or ethyl acetate/m-xylene mixtures. The competitive adsorption of these typical VOCs on the catalyst surface induced an inhibitive effect on their oxidation, and increasing the temperature favored the oxidation of the VOCs. The mixed VOCs could be completely oxidized into CO_2 and H_2 O below 320°C at a space velocity of 40,000 m L/(g·hr). The 0.91 wt.% Au0.48 Pd/α-MnO_2 nanotube catalyst exhibited high catalytic stability as well as good tolerance to water vapor and CO_2 in the oxidation of the VOC mixtures. Thus, the α-MnO_2 nanotube-supported noble metal alloy catalysts hold promise for the efficient elimination of VOC mixtures.  相似文献   

2.
It is important to develop efficient and economic techniques for removing volatile organic compounds(VOCs) in indoor air. Heterogeneous Ti O_2-based semiconductors are a promising technology for achieving this goal. Anatase/brookite/rutile tricrystalline Ti O_2 with mesoporous structure was synthesized by a low-temperature hydrothermal route in the presence of HNO_3.The obtained samples were characterized by X-ray diffraction and N_2 adsorption–desorption isotherm. The photocatalytic activity was evaluated by photocatalytic decomposition of toluene in air under UV light illumination. The results show that tricrystalline Ti O_2 exhibited higher photocatalytic activity and durability toward gaseous toluene than bicrystalline Ti O_2,due to the synergistic effects of high surface area, uniform mesoporous structure and junctions among mixed phases. The tricrystalline Ti O_2 prepared at R HNO_3= 0.8, containing80.7% anatase, 15.6% brookite and 3.7% rutile, exhibited the highest photocatalytic activity,about 3.85-fold higher than that of P25. The high activity did not significantly degrade even after five reuse cycles. In conclusion, it is expected that our study regarding gas-phase degradation of toluene over tricrystalline Ti O_2 will enrich the chemistry of the Ti O_2-based materials as photocatalysts for environmental remediation and stimulate further research interest on this intriguing topic.  相似文献   

3.
Advanced oxidation technologies are a friendly environmental approach for the remediation of industrial wastewaters. Here, one pot synthesis of mesoporous WO_3 and WO_3-graphene oxide(GO) nanocomposites has been performed through the sol–gel method. Then, platinum(Pt) nanoparticles were deposited onto the WO_3 and WO_3-GO nanocomposite through photochemical reduction to produce mesoporous Pt/WO_3 and Pt/WO_3-GO nanocomposites. X-ray diffraction(XRD) findings exhibit a formation of monoclinic and triclinic WO_3 phases. Transmission Electron Microscope(TEM) images of Pt/WO_3-GO nanocomposites exhibited that WO_3 nanoparticles are obviously agglomerated and the particle sizes of Pt and WO_3 are ~ 10 nm and 20–50 nm, respectively. The mesoporous Pt/WO_3 and Pt/WO_3-GO nanocomposites were assessed for photocatalytic degradation of Methylene Blue(MB) as a probe molecule under visible light illumination.The findings showed that mesoporous Pt/WO_3, WO_3-GO and Pt/WO_3-GO nanocomposites exhibited much higher photocatalytic efficiencies than the pure WO_3. The photodegradation rates by mesoporous Pt/WO_3-GO nanocomposites are 3, 2 and 1.15 times greater than those by mesoporous WO_3, WO_3-GO, and Pt/WO_3, respectively. The key factors of the enhanced photocatalytic performance of Pt/WO_3-GO nanocomposites could be explained by the highly freedom electron transfer through the synergetic effect between WO_3 and GO sheets, in addition to the Pt nanoparticles that act as active sites for O2 reduction, which suppresses the electron hole pair recombination in the Pt/WO_3-GO nanocomposites.  相似文献   

4.
Surface junctions between Bi OBr and BiVO_4 were synthesized. The BiOBr/BiVO_4 with 1 wt.%of Bi OBr exhibited the highest photocatalytic activity in the degradation of Rh B under visible-light irradiation. It was found that the highly efficient adsorption of Rh B molecules via the electrostatic attraction between Br-and cationic \N(Et)_2 group played a key role for the high photocatalytic activities of BiOBr/BiVO_4. This efficient adsorption promoted the N-deethylation of Rh B and thus accelerated the photocatalytic degradation of Rh B.Moreover, the metal-to-metal charge transfer(MMCT) mechanism was proposed, which revealed the concrete path paved with Bi–O–Bi chains for the carrier migration in BiOBr/BiVO_4. The interaction between photoexcited Rh B* and the Bi~(3+) in BiVO_4 provided the driving force for the migration of photo-generated carriers along the Bi–O–Bi chains. This work has not only demonstrated the important role of efficient adsorption in the photocatalytic degradation of organic contaminants, but also developed a facile strategy to improve the efficiency of photocatalysts.  相似文献   

5.
Porous S-doped bismuth vanadate with an olive-like morphology and its supported iron oxide (y wt.% FeOx/BiVO4-δS0.08, y = 0.06, 0.76, and 1.40) photocatalysts were fabricated using the dodecylamine-assisted alcohol-hydrothermal and incipient wetness impregnation methods, respectively. It is shown that the y wt.% FeOx/BiVO4-δS0.08 photocatalysts contained a monoclinic scheetlite BiVO4 phase with a porous olive-like morphology, a surface area of 8.8-9.2 m^2/g, and a bandgap energy of 2.38-2.42 eV. There was co-presence of surface Bi^5+, Bi^3+, V^5+, V^3+, Fe^3+, and Fe^2+ species in y wt.% FeOx/BiVO4-δS0.08. The 1.40 wt.% FeOx/BiVO4-δS0.08 sample performed the best for Methylene Blue degradation under visible-light illumination. The photocatalytic mechanism was also discussed. We believe that the sulfur and FeOx co-doping, higher oxygen adspecies concentration, and lower baudgap energy were responsible for the excellent visible-light-driven catalytic activity of 1.40 wt.% FeOx/BiVO4-δS0.08.  相似文献   

6.
Novel 3D biogenic C-doped Bi_2 MoO_6/In_2O_3-ZnO Z-scheme heterojunctions were synthesized for the first time, using cotton fiber as template. The as-prepared samples showed excellent adsorption and photodegradation performance toward the hazardous antibiotic doxycycline under simulated sunlight irradiation. The morphology, phase composition and in situ carbon doping could be precisely controlled by adjusting processing parameters. The carbon doping in Bi_2 MoO_6/In_2O_3-ZnO was derived from the cotton template, and the carbon content could be varied in the range 0.9–4.4 wt.% via controlling the heat treatment temperature. The sample with Bi_2 MoO_6/In_2O_3-ZnO molar ratio of 1:2 and carbon content of1.1 wt.% exhibited the highest photocatalytic activity toward doxycycline degradation,which was 3.6 and 4.3 times higher than those of pure Bi_2 MoO_6 and Zn In Al-CLDH(calcined layered double hydroxides), respectively. It is believed that the Z-scheme heterojunction with C-doping, the 3D hierarchically micro–meso–macro porous structure, as well as the high adsorption capacity, contributed significantly to the enhanced photocatalytic activity.  相似文献   

7.
We report a rapid method of green chemistry approach for synthesis of gold nanoparticles(AuNPs)using Lagerstroemia speciosa leaf extract(LSE). L. speciosa plant extract is known for its effective treatment of diabetes and kidney related problems. The green synthesis of Au NPs was complete within 30 min at 25°C. The same could also be achieved within 2 min at a higher reaction temperature(80°C). Both UV–visible spectroscopy and transmission electron microscopy results suggest that the morphology and size distribution of Au NPs are dependent on the pH of gold solution,gold concentration,volume of LSE,and reaction time and temperature. Comparison between Fourier transform infrared spectroscopy(FT-IR)spectra of LSE and the synthesized Au NPs indicate an active role of polyphenolic functional groups(from gallotannins,lagerstroemin,and corosolic acid)in the green synthesis and capping of Au NPs. The green route synthesized Au NPs show strong photocatalytic activity in the reduction of dyes viz.,methylene blue,methyl orange,bromophenol blue and bromocresol green,and 4-nitrophenol under visible light in the presence of Na BH_4. The non-toxic and cost effective LSE mediated Au NPs synthesis proposed in this study is extremely rapid compared to the other reported methods that require hours to days for complete synthesis of Au NPs using various plant extracts. Strong and stable photocatalytic behavior makes Au NPs attractive in environmental applications,particularly in the reduction of organic pollutants in wastewater.  相似文献   

8.
A series of new biochar-supported composite based on the combination of biochar and metallic nanoparticles(NPs)were produced through single-step pyrolysis of FeCl_3–Ti(OBu)_4 laden agar biomass under NH_3 environment.The physiochemical properties of composites were characterized thoroughly.It has found that heating temperature and N-doping through NH_3-ambiance pyrolysis significantly influence the visible-light sensitivity and bandgap energy of composites.The catalytic activities of composites were measured by degradation of Methylene Blue(MB)in the presence or absence of H_2O_2 and visible-light irradiation.Our best catalyst(N–TiO_2–Fe_3O_4-biochar)exhibits rapid and high MB removal competency(99.99%)via synergism of adsorption,photodegradation,and Fenton-like reaction.Continuous production of O_2U~-and UOH radicles performs MB degradation and mineralization,confirmed by scavenging experiments and degradation product analysis.The local trap state Ti~(3+),Fe_3O_4,and N-carbon of the catalyst acted as active sites.It has suggested that the Ti~(3+)and N-doped dense carbon layer improve charge separation and shuttle that prolonged photo-Fenton like reaction.Moreover,the catalyst is highly stable,collectible,and recyclable up to 5 cycles with high MB degradation efficiency.This work provides a new insight into the synthesis of highly visible-light sensitized biocharsupported photocatalyst through NH_3-ambiance pyrolysis of NPs-laden biomass.  相似文献   

9.
The performance of a biofilter for off-gas treatment relies on the activity of microorganisms and adequate O_2 and H_2O. In present study, a microelectrode was applied to analyze O_2 in polyurethane foam cubes(PUFCs) packed in a biofilter for SO_2 removal. The O_2 distribution varied with the density and water-containing rate(WCR) of PUFCs. The O_2 concentration dropped sharply from 10.2 to 0.8 mg/L from the surface to the center of a PUFC with 97.20%of WCR. The PUFCs with high WCR presented aerobic–anoxic–aerobic areas.Three-dimensional simulated images demonstrated that the structure of PUFCs with high WCR consisted of an aerobic "shell" and an anoxic "core", with high-density PUFCs featuring a larger anoxic area than low-density PUFCs. Moreover, the H_2O distribution in the PUFC was uneven and affected the O_2 concentration. Whereas aerobic bacteria were observed in the PUFC surface, facultative anaerobic microorganisms were found at the PUFC core, where the O_2 concentration was relatively low. O_2 and H_2O distributions differed in the PUFCs, and the distribution of microorganisms varied accordingly.  相似文献   

10.
In this article,the effects of TiO_2 surface fluorination and sulfation,on the active oxygen species formed at the reduction site in the photocatalytic process,namely O_2~(?) and H_2O_2,were investigated from a new perspective.The superoxide radical,(O_2~(?)),was determined by colorimetry of nitroblue tetrazolium,a prominent O_2~(?) scavenger.Hydrogen peroxide (H_2O_2) was estimated by using the iodide-starch method.In the naked TiO_2 photocatalysis,O_2~(?) though less reactive,was a very important intermediate.When the TiO_2 surface was fluorinated,more O_2~(?) and H_2O_2 were produced,which indicated that the surface modification could greatly reduce the recombination of photogenerated electrons and holes,thus enhancing the photocatalytic rate.In the sulfated system,photocatalysis proceeded with a more complicated mechanism.These results added support to the view of fluoride-induced enhancement and sulfide's nonappreciable inhibition effect.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号