Enhanced photocatalytic performance of Bi2O2CO3/Bi4O5Br2/reduced graphene oxide Z-schemehe terojunction via a one-pot room-temperature synthesis

Bi₂O₂CO₃(BOC)/Bi₄O₅Br₂(BOB)/reduced graphene oxide (rGO) Z-scheme heterojunction with promising photocatalytic properties was synthesized via a facile one-pot room-temperature method.Ultra-thin nanosheets of BOC and BOB were grown in situ on r GO.The formed 2D/2D direct Z-scheme heterojunction of BOC/BOB with oxygen vacancies (OVs) effectively leads to lower negative electron reduction potential of BOB as well as higher positive h...     

Newly developed Fe3O4–Cr2O3 magnetic nanocomposite for photocatalytic decomposition of 4-chlorophenol in water

Chlorophenols, typically 4-chlorophenols are highly toxic and non-biodegradable organic contaminants which pose serious threat to the environment, particularly when released into aqueous medium. The removal of these pollutants by efficient method has received worldwide concern in recent past. A new Fe_3O_4–Cr_2O_3 magnetic nanocomposite was synthesized by wet chemical method under ultrasonic irradiation. Microstructure and morphology of the nanocomposite were characterized by powder X-ray diffraction(XRD),Fourier transform infrared(FT-IR), and a transmission electron microscope(TEM). Magnetic and optical properties were studied by a vibrating sample magnetometer(VSM) and an ultraviolet–visible(UV–Vis) spectrophotometer respectively. The magnetic nanocomposite(MNC) was used as photocatalyst for effective decomposition of 4-chlorophenol in water under ultraviolet(UV) irradiation.     

One-step preparation of a novel graphitic biochar/Cu0/Fe3O4 composite using CO2-ambiance pyrolysis to activate peroxydisulfate for dye degradation

Herein,a one-step co-pyrolysis protocol was adopted for the first time to prepare a novel pyrogenic carbon-Cu⁰/Fe₃O₄ heteroatoms (FCBC) in CO₂ ambiance to discern the roles of each component in PDS activation.During co-pyrolysis,CO₂ catalyzed formation of reducing gases by biomass which facilitated reductive transformation of Fe³⁺ and Cu²⁺ to Cu⁰ and Fe₃O₄,respectively.According to the a...     

Pd Pt VOx/CeO2-ZrO2:Highly efficient catalysts with good sulfur dioxide-poisoning reversibility for the oxidative removal of ethylbenzene

The PdPtVO_x/CeO₂-ZrO₂(PdPtVO_x/CZO) catalysts were obtained by using different approaches,and their physical and chemical properties were determined by various techniques.Catalytic activities of these materials in the presence of H₂O or SO₂were evaluated for the oxidation of ethylbenzene (EB).The PdPtVO_x/CZO sample exhibited high catalytic activity,good hydrothermal stability,and reversible sulfur dioxide-poisoning perfo...     

Choice of precipitant and calcination temperature of precursor for synthesis of NiCo2O4 for control of CO–CH4 emissions from CNG vehicles

Compressed natural gas(CNG)is most appropriate an alternative of conventional fuel for automobiles.However,emissions of carbon-monoxide and methane from such vehicles adversely affect human health and environment.Consequently,to abate emissions from CNG vehicles,development of highly efficient and inexpensive catalysts is necessary.Thus,the present work attempts to scan the effects of precipitants(Na_2CO_3,KOH and urea)for nickel cobaltite(Ni Co_2O_4)catalysts prepared by co-precipitation from nitrate solutions and calcined in a lean CO-air mixture at 400°C.The catalysts were used for oxidation of a mixture of CO and CH_4(1:1).The catalysts were characterized by X-ray diffractometer,Brunauer–Emmett–Teller surface-area,X-ray photoelectron spectroscopy;temperature programmedreductionandScanningelectronmicroscopycoupledwith Energy-Dispersive X-Ray Spectroscopy.The Na_2CO_3was adjudged as the best precipitant for production of catalyst,which completely oxidized CO-CH_4mixture at the lowest temperature(T_(100)=350°C).Whereas,for catalyst prepared using urea,T_(100)=362°C.On the other hand the conversion of CO-CH_4mixture over the catalyst synthesized by KOH limited to 97%even beyond 400°C.Further,the effect of higher calcination temperatures of 500 and600°C was examined for the best catalyst.The total oxidation of the mixture was attained at higher temperatures of 375 and 410°C over catalysts calcined at 500 and 600°C respectively.Thus,the best precipitant established was Na_2CO_3and the optimum calcination temperature of 400°C was found to synthesize the Ni Co_2O_4catalyst for the best performance in CO-CH_4oxidation.     

Simultaneous removal of NO and dichloromethane（CH2Cl2） over Nb-loaded cerium nanotubes catalyst

Herein, a series of niobium oxide supported cerium nanotubes（Ce NTs） catalysts with different loading amount of Nb₂O₅（0–10 wt.%） were prepared and used for selective catalytic reduction of NOxwith NH₃（NH₃-SCR） in the presence of CH₂Cl₂. Commercial V₂O₅-WO₃-TiO₂ catalyst was also prepared for comparison. The physcial properties and chemical properties of the Nb₂O₅ lo...     

Growth of Ag/g-C3N4 nanocomposites on nickel foam to enhance photocatalytic degradation of formaldehyde under visible light

Formaldehyde is a pollutant that significantly affects the indoor air quality.However,conventional remediation approaches can be challenging to deal with low-concentration formaldehyde in an indoor environment.In this study,Photocatalysts of Ag/graphitic carbon nitride (g-C₃N₄)/Ni with 3D reticulated coral structure were prepared by thermal polymerization and liquid phase photo-deposition,using nickel foam (NF) as the carrier.Experiments demonstrated that when the Ag concen...     

N/Ce doped graphene supported Pt nanoparticles for the catalytic oxidation of formaldehyde at room temperature

Pt catalysts with nitrogen-doped graphene oxide (GO) as support and CeO₂ as promoter were prepared by impregnation method,and their catalytic oxidation of formaldehyde (HCHO) at room temperature was tested.The Pt-CeO₂/N-rGO (reduced GO) with a mass fraction of 0.7% Pt and 0.8%CeO₂ exhibited an excellent catalytic performance with the 100% conversion of HCHO at room temperature.Physicochemical characterization demonstrated that nitrogendoping greatly increased the...     

Insights into the interface of NiCo2O4 spinel/LaCoO3 perovskite nano-composite for CO and soot oxidation

In the quest for the development of thermally stable, highly active and low-cost catalysts for use in catalyzed diesel particulate filter, nano-composites are new areas of research. Therefore, we reported the easy synthesis of spinel NiCo₂O₄/perovskite LaCoO₃ nano-composite,and its individual oxides NiCo₂O₄and LaCoO₃ for comparison. The detailed insights into the physio-chemical characteristics of formed NiCo₂O₄     

Enhanced remediation of Cr（Ⅵ）-contaminated groundwater by coupling electrokinetics with ZVI/Fe3O4/AC-based permeable reactive barrier

Although widely used in permeation reaction barrier（PRB） for strengthening the removal of various heavy metals, zero-valent iron（ZVI） is limited by various inherent drawbacks, such as easy passivation and poor electron transfer. As a solution, a synergistic system with PRB and electrokinetics（PRB-EK） was established and applied for the efficient removal of Cr（Ⅵ）-contaminated groundwater. As the filling material of PRB, ZVI/Fe₃O₄/activated carbon（ZVI/Fe₃O₄     

纳米四氧化三铁对2,4-D的降解研究

采用纳米Fe3O4降解溶液中的2,4-D,考察了2,4-D初始浓度、纳米Fe3O4的投加量、溶液pH对2,4-D降解效率的影响,并探讨了2,4-D的降解机理。实验结果表明,Fe3O4对2,4-D有明显的降解作用,纳米Fe3O4的降解效果优于微米级Fe3O4,降解过程中溶液中的氯离子浓度随着2,4-D的降解而升高,Fe3O4对2,4-D的降解机理是还原脱氯。当2,4-D初始浓度在0～10mg/L、纳米Fe3O4投加量0～300mg/L的范围内,2,4-D降解率随初始浓度和纳米Fe3O4投加量的增加而增大。在2,4-D初始浓度为10mg/L、pH3.0、纳米Fe3O4投加量300mg/L时降解效率最高,48h内2,4-D的降解率可达40%。     

Effect of SiO2 addition on NH4HSO4 decomposition and SO2 poisoning over V2O5–MoO3/TiO2–CeO2 catalyst

The deposition of NH₄HSO₄ and the poisoning effect of SO₂ on SCR catalyst are the main obstacles that restrict the industrial application of CeO₂-doped SCR catalysts. In this work, deposited NH₄HSO₄ decomposition behavior and SO₂ poisoning over V₂O₅–MoO₃/TiO₂ catalysts modified with CeO₂ and SiO₂ were investigated. By the means of characterization analysis, it was found that the addition of SiO₂ into VMo/Ti–Ce had an impact on the interaction existed between catalyst surface atoms and NH₄HSO₄. Temperature-programmed methods and in situ diffused reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments indicated that the doping of SiO₂ promoted the decomposition of deposited NH₄HSO₄ on VMo/Ti–Ce catalyst surface by reducing the thermal stability of NH₄HSO₄ and enhancing the NH₄HSO₄ reactivity with NO in low temperature. And this improvement may be the reason for the better catalytic activity than VMo/Ti–Ce in the case of NH₄HSO₄ deposition. Accompanied with cerium sulfate species generated over catalyst surface, the conversion of SO₂ to SO₃ was inhibited in SiCe mixed catalyst. The addition of SiO₂ could promote the decomposition of cerium sulfate, which may be a potential strategy to enhance the resistance of SO₂ poisoning over CeO₂-modifed catalysts.     

蔬菜样品的H_2SO_4-H_2O_2快速消化方法

本文报道了使用硫酸 -过氧化氢对蔬菜样品进行快速消化的方法。其消化时间比常规消化方法大为缩短。重金属元素镉、铬、铜、镍、锌含量测定的结果 ,与用常规消化方法 (硝酸 -高氯酸 )相吻合。     

4-CP在零价铁/H_2O_2体系中的降解研究

文章对4-氯酚在非均相零价铁/H2O2体系中的降解进行了实验研究。结果表明,4-氯酚能在低pH零价铁/H2O2体系中迅速降解。pH对降解具有重要影响,当pH大于5,4-CP降解效果<10%。同时在低pH(pH3)环境下考察了铁粉和H2O2投加量的影响,在最佳条件下对溶液中亚铁离子的形成和过氧化氢的分解进行了进一步的实验研究。最后在对中间产物分析的基础上提出了4-CP降解路径假设。