Individual particle analysis of aerosols collected at Lhasa City in the Tibetan Plateau

To understand the composition and major sources of aerosol particles in Lhasa City on the Tibetan Plateau(TP), individual particles were collected from 2 February to 8 March, 2013 in Tibet University. The mean concentrations of both PM2.5and PM10 during the sampling were25.7 ± 21.7 and 57.2 ± 46.7 μg/m3, respectively, much lower than those of other cities in East and South Asia, but higher than those in the remote region in TP like Nam Co, indicating minor urban pollution. Combining the observations with the meteorological parameters and back trajectory analysis, it was concluded that local sources controlled the pollution during the sampling. Transmission electron microscopy(TEM) combined with energydispersive X-ray spectra(EDS) was used to study 408 particles sampled on four days. Based on the EDS analysis, a total of 8 different particle categories were classified for all 408 particles, including Si-rich, Ca-rich, soot, K-rich, Fe-rich, Pb-rich, Al-rich and other particles.The dominant elements were Si, Al and Ca, which were mainly attributed to mineral dust in the earth's crust such as feldspar and clay. Fe-, Pb-, K-, Al-rich particles and soot mainly originated from anthropogenic sources like firework combustion and biomass burning during the sampling. During the sampling, the pollution mainly came from mineral dust,while the celebration ceremony and religious ritual produced a large quantity of anthropogenic metal-bearing particles on 9 and 25 February 2013. Cement particles also had a minor influence. The data obtained in this study can be useful for developing pollution control strategies.     

Atmospheric fine particles in a typical coastal port of Yangtze River Delta

In recent decades, coastal ports have experienced rapid development and become an important economic and ecological hub in China. Atmospheric particle is a research hotspot in atmospheric environmental sciences in inland regions. However, few studies on the atmospheric particle were conducted in coastal port areas in China, which indeed suffers atmospheric particle pollution. Lack of the physicochemical characteristics of fine particles serves as an obstacle toward the accurate control for air pollution in the coastal port area in China. Here, a field observation was conducted in an important coastal port city in Yangtze River Delta from March 6 to March 19, 2019. The average PM_2.5 concentration was 63.7 ± 27.8 μg/m³ and NO₃^—, SO₄^2—, NH₄⁺, and organic matter accounted for ~60% of PM_2.5. Fe was the most abundant trace metal element and V as the ship emission indicator was detected. Transmission electron microscopy images showed that SK-rich, soot, Fe, SK-soot and SK-Fe were the major individual particles in the coastal port. V and soluble Fe were detected in sulfate coating of SK-Fe particles. We found that anthropogenic emissions, marine sea salt, and secondary atmosphere process were the major sources of fine particles. Backward trajectory analysis indicated that the dominant air masses were marine air mass, inland air mass from northern Zhejiang and inland-marine mixed air mass from Shandong and Shanghai during the sampling period. The findings can help us better understand the physicochemical properties of atmospheric fine particles in the coastal port of Eastern China.     

Source apportionment of PM2.5 and visibility in Jinan, China

Atmospheric extinction is impacted by the chemical composition of particles. To better understand the chemical composition of PM_2.5 (particles with diameters of less than 2.5 μm) and its relationship with extinction, one-month sampling campaigns were carried out in four different seasons from 2013 to 2014 in Jinan, China. The seasonal average concentrations of PM_2.5 were 120.9 (autumn), 156.6 (winter), 102.5 (spring), and 111.8 μg/m³ (summer). The reconstructed PM_2.5 chemical composition showed that sulfate, nitrate, chlorine salt, organic matter (OM), mineral dust, elemental carbon (EC) and others accounted for 25%, 14%, 2%, 24%, 22%, 3% and 10%, respectively. The relationship between the chemical composition of PM_2.5 and visibility was reconstructed by the IMPROVE method, and ammonium sulfate, ammonium nitrate, OM and EC dominated the visibility. Seven main sources were resolved for PM_2.5, including secondary particles, coal combustion, biomass burning, industry, motor vehicle exhaust, soil dust and cooking, which accounted for 37%, 21%, 13%, 13%, 12%, 3% and 1%, respectively. The contributions of different sources to visibility were similar to those to PM_2.5. With increasing severity of air pollution, the contributions of secondary particles and coal combustion increased, while the contribution of motor vehicle exhaust decreased. The results showed that coal combustion and biomass burning were still the main sources of air pollution in Jinan.     

Chemical compositions of PM2.5 aerosol during haze periods in the mountainous city of Yong''an, China

Haze phenomena were found to have an increasing tendency in recent years in Yong'an, a mountainous industrial city located in the center part of Fujian Province, China. Atmospheric fine particles (PM_2.5) in the urban area during haze periods in three seasons (spring, autumn and winter) from 2007 to 2008 were collected, and the mass concentrations and chemical compositions (seventeen elements, water soluble inorganic ions (WSIIs) and carbonaceous species) of PM_2.5 were determined. PM_2.5 mass concentrations did not show a distinct difference among the three seasons. The carbonaceous species organic carbon (OC) and elemental carbon (EC) constituted up to 19.2%-30.4% of the PM_2.5 mass during sampling periods, while WSIIs made up 25.3%-52.5% of the PM_2.5 mass. The major ions in PM_2.5 were SO₄^2-, NO₃^- and NH₄⁺, while the major elements were Si, K, Pb, Zn, Ca and Al. The experimental results (from data based on three haze periods with a 10-day sampling length for each period) showed that the crustal element species was the most abundant component of PM_2.5 in spring, and the secondary ions species (SO₄^2-, NO₃^-, NH₄⁺, etc.) was the most abundant component in PM_2.5 in autumn and winter. This indicated that dust was the primary pollution source for PM_2.5 in spring and combustion and traffic emissions could be the main pollution sources for PM_2.5 in autumn and winter. Generally, coal combustion and traffic emissions were considered to be the most prominent pollution sources for this city on haze days.     

Size and elemental composition of dry-deposited particles during a severe dust storm at a coastal site of Eastern China

Dry-deposited particles were collected during the passage of an extremely strong dust storm in March, 2010 at a coastal site in Qingdao(36.15°N, 120.49°E), a city located in Eastern China. The size, morphology, and elemental composition of the particles were quantified with a scanning electron microscope equipped with an energy dispersive X-ray instrument(SEM–EDX). The particles appeared in various shapes, and their size mainly varied from 0.4to 10 μm, with the mean diameters of 0.5, 1.5, and 1.0 μm before, during, and after the dust storm, respectively. The critical size of the mineral particles settling on the surface in the current case was about 0.3–0.4 μm before the dust storm and about 0.5–0.7 μm during the dust storm. Particles that appeared in high concentration but were smaller than the critical size deposited onto the surface at a small number flux. The elements Al, Si and Mg were frequently detected in all samples, indicating the dominance of mineral particles. The frequency of Al in particles collected before the dust storm was significantly lower than for those collected during and after the dust storm. The frequencies of Cl and Fe did not show obvious changes, while those of S, K and Ca decreased after the dust arrival. These results indicate that the dust particles deposited onto the surface were less influenced by anthropogenic pollutants in terms of particle number.     

Size, composition, and mixing state of individual aerosol particles in a South China coastal city

Aerosol samples were collected in summer in Macao,a coastal city of the Pearl River Delta Region in China.Morphology,size,elemental composition,and mixing state of individual aerosol particles were determined by scanning electron microscopy coupled energy dispersive X-ray(SEM/EDX) and transmission electron microscopy(TEM).Based on the morphologies of 5711 aerosol particles,they consist of soot(32%),mineral(17%),secondary(22%),and unknown fine particles(29%).The sizes of these particles were mostly distributed between 0.1 and 0.4 μm.Compositions of 202 mineral particles were obtained by SEM/EDX.Mineral particles were mainly classified into three types:Si-rich,Ca-rich,and Na-rich.The compositions of typical mineral particles can indicate their sources in sampling location.For example,mineral particles,collected along the main street,were associated with trace amounts of heavy metals,such as Zn,Ti,Mn,Ba,Pb,and As.TEM observations indicate that most Na-rich particles were aged sea salt particles(e.g.,Na2SO4 and NaNO3) which formed through heterogeneous chemical reactions between sea salt and acidic gases.Additionally,aging time of soot was short in Macao due to high humidity,high temperature,and high levels of sunlight in Macao.Most of soot and fine mineral dust particles were internally mixed with secondary particles.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Surface-enhanced Raman scattering for mixing state characterization of individual fine particles during a haze episode in Beijing, China

The nondestructive characterization of the mixing state of individual fine particles using the traditional single particle analysis technique remains a challenge. In this study, fine particles were collected during haze events under different pollution levels from September 5 to 11 2017 in Beijing, China. A nondestructive surface-enhanced Raman scattering (SERS) technique was employed to investigate the morphology, chemical composition, and mixing state of the multiple components in the individual fine particles. Optical image and SERS spectral analysis results show that soot existing in the form of opaque material was predominant during clear periods (PM_2.5 ≤ 75 µg/m³). During polluted periods (PM_2.5 > 75 µg/m³), opaque particles mixed with transparent particles (nitrates and sulfates) were generally observed. Direct classical least squares analysis further identified the relative abundances of the three major components of the single particles: soot (69.18%), nitrates (28.71%), and sulfates (2.11%). A negative correlation was observed between the abundance of soot and the mass concentration of PM_2.5. Furthermore, mapping analysis revealed that on hazy days, PM_2.5 existed as a core-shell structure with soot surrounded by nitrates and sulfates. This mixing state analysis method for individual PM_2.5 particles provides information regarding chemical composition and haze formation mechanisms, and has the potential to facilitate the formulation of haze prevention and control policies.     

Pollution levels, composition characteristics and sources of atmospheric PM2.5 in a rural area of the North China Plain during winter

The pollution levels, composition characteristics and sources of atmospheric PM_2.5 were investigated based on field measurement at a rural site in the North China Plain (NCP) from pre-heating period to heating period in winter of 2017. The hourly average concentrations of PM_2.5 frequently exceeded 150 µg/m³ and even achieved 400 µg/m³, indicating that the PM_2.5 pollution was still very serious despite the implementation of stricter control measures in the rural area. Compared with the pre-heating period, the mean concentrations of organic carbon (OC), element carbon (EC) and chlorine ion (Cl^?) during the heating period increased by 20.8%, 36.6% and 38.8%, accompanying with increments of their proportions in PM_2.5 from 37.5%, 9.8% and 5.5% to 42.9%, 12.7% and 7.2%, respectively. The significant increase of both their concentrations and proportions during the heating period was mainly ascribed to the residential coal combustion. The proportions of sulfate, nitrate and ammonium respectively increased from 9.9%, 10.9% and 9.0% in nighttime to 13.8%, 16.2% and 11.1% in daytime, implying that the daytime photochemical reactions made remarkable contributions to the secondary inorganic aerosols. The simulation results from WRF-Chem revealed that the emission of residential coal combustion in the rural area was underestimated by the current emission inventory. Six sources identified by positive matrix factorization (PMF) based on the measurement were residential coal combustion, secondary formation of inorganic aerosols, biomass burning, vehicle emission and raising dust, contributing to atmospheric PM_2.5 of 40.5%, 21.2%, 16.4%, 10.8%, 8.6% and 2.5%, respectively.     

Investigation of PM2.5 pollution during COVID-19 pandemic in Guangzhou, China

The COVID-19 pandemic has raised awareness about various environmental issues, including PM_2.5 pollution. Here, PM_2.5 pollution during the COVID-19 lockdown was traced and analyzed to clarify the sources and factors influencing PM_2.5 in Guangzhou, with an emphasis on heavy pollution. The lockdown led to large reductions in industrial and traffic emissions, which significantly reduced PM_2.5 concentrations in Guangzhou. Interestingly, the trend of PM_2.5 concentrations was not consistent with traffic and industrial emissions, as minimum concentrations were observed in the fourth period (3/01-3/31, 22.45 μg/m³) of the lockdown. However, the concentrations of other gaseous pollutants, e.g., SO₂, NO₂ and CO, were correlated with industrial and traffic emissions, and the lowest values were noticed in the second period (1/24-2/03) of the lockdown. Meteorological correlation analysis revealed that the decreased PM_2.5 concentrations during COVID-19 can be mainly attributed to decreased industrial and traffic emissions rather than meteorological conditions. When meteorological factors were included in the PM_2.5 composition and backward trajectory analyses, we found that long-distance transportation and secondary pollution offset the reduction of primary emissions in the second and third stages of the pandemic. Notably, industrial PM_2.5 emissions from western, southern and southeastern Guangzhou play an important role in the formation of heavy pollution events. Our results not only verify the importance of controlling traffic and industrial emissions, but also provide targets for further improvements in PM_2.5 pollution.     

Distribution and ecological effect of mercury in Laogang landfill, Shanghai, China

Laogang landfill near Shanghai is the largest landfill in China, and receives about 10000 t of daily garbage per day, Samples of topsoil and plants were analyzed to evaluate mercury pollution from the landfill. For topsoil samples, there were significant correlations among total mercury （HgT）, combinative mercury （Hgc） and gaseous mercury （HgG）, and content of total organic carbon （TOC）, but, no significantly relationship was found between Hg content and filling time. Hg content changes in vertical profiles with time showed that the average Hgv of profiles 1992, 1996, and 2000 was similar, but their average HgG was quite different. HgT was significantly correlated with Hgc in profile 1992 and 2000, and Hgv was significantly correlated with Hg6 in profile 1996. HgG/Hgv ratio in profile samples decreased in the order of （HgG,/HgT）1992〉（HgG/HgT）1996〉〉（HgG/HgT）2000. A simple outline of Hg release in landfill could be drawn： with increasing of filling time, degradation undergoes different biodegradation, accordingly, gaseous mercury goes through small, more, and small proportion to total mercury. Distribution of Hg in plants was inhomogeneous, following the order of leaf〉root〉stem. The highest value of leaf may be associated with higher atmospheric Hg from landfill. Ligneous plants （e.g. Phyllostachys glanca, Prunus salicina and Ligustrum lucidum） are capable of enriching more Hg than herbaceous plants.     

EDTA-enhanced phytoremediation of lead contaminated soil by Bidens maximowicziana

Phytoremediation is a potential cleanup technology for the removal of heavy metals from contaminated soils.Bidens maximowicziana is a new Pb hyperaccumulator,which not only has remarkable tolerance to Pb but also extraordinary accumulation capacity for Pb.The maximum Pb concentration was 1509.3 mg/kg in roots and 2164.7 mg/kg in overground tissues.The Pb distribution order in the B. maximowicziana was:leaf>stem>root.The effect of amendments on phytoremediation was also studied.The mobility of soil Pb and the Pb concentrations in plants were both increased by EDTA application.Compared with CK(control check),EDTA application promoted translocation of Pb to overground parts of the plant.The Pb concentrations in overground parts of plants was increased from 24.23-680.56 mg/kg to 29.07-1905.57 mg/kg.This research demonstrated that B.maximowicziana appeared to be suitable for phytoremediation of Pb contaminated soil,especially,combination with EDTA.     

Decomposition of alachlor by ozonation and its mechanism

Decomposition and corresponding mechanism of alachlor, an endocrine disruptor in water by ozonation were investigated. Results showed that alachlor could not be completely mineralized by ozone alone. Many intermediates and final products were formed during the process, including aromatic compounds, aliphatic carboxylic acids, and inorganic ions. In evoluting these products, some of them with weak polarity were qualitatively identified by GC-MS. The information of inorganic ions suggested that the dechlorination was the first and the fastest step in the ozonation of alachlor.     

Enzymatic oxidation of aqueous pentachlorophenol

The influence of the nonionic surfactant Tween 80 on pentachlorophenol （PCP） oxidation catalyzed by horseradish peroxidase was studied. The surfactant was tested at concentrations below and above its critical micelle concentration （CMC）. Enhancement of PCP removal was observed at sub-CMCs. The presence of Tween 80 in the reaction mixture reduced enzyme inactivation which occurred through a combination of free radical attack and sorption by precipitated products. A simple first-order model was able to simulate time profiles for enzyme inactivation in the presence or absence of Tween 80. At supra-CMCs, the surfactant caused noticeable reductions in PCP removal, presumably through micelle partitioning of PCP which precluded the hydrophobic PCP molecule from interacting with the enzyme.     

基于综合水质标识指数和对应分析法的校园河道水质评价

以三峡大学的校园河道求索溪为研究对象,利用综合水质标识指数法确定求索溪水质类别,分析其水质时空变化规律,并利用对应分析法得出求索溪中不同监测点的主要污染因子.研究结果表明:求索溪整体的综合水质标识指数为7.423,整体水质为劣V类(地表水环境质量标准GB 3838-2002)且黑臭.从时间变化来看,求索溪4月份的水质最差,5月份次之,4、5月份所有监测点的水质都劣于V类且黑臭;8月份水质最好,水质为Ⅳ类;从空间分布来看,8个监测点综合水质标识指数均超过6.0,水质为劣V类,其中6号监测点的水质相对最好,监测点3号的水质相对最差;对应分析法得出求索溪的整体水体污染程度受总氮因子的影响最大,其次为总磷.该研究拟为求索溪及类似校园河道的水环境治理研究提供基础依据和参考.     

Effects of chitosan on growth of an aquatic plant (Hydrilla verticillata) in polluted waters with different chemical oxygen demands

Effects of chitosan on a submersed plant, Hydrilla verticillata, were investigated. Results indicated that H. venicillata could prevent ultrastructure phytotoxicities and oxidativereaction from polluted water with high chemical oxygen demand (COD). Superoxide dismutase (SOD) activity and malondialdehyde (MDA) contents in H. verticillata treated with 0.1% chitosan in wastewater increased with high COD (980 mg/L) and decreased with low COD (63 mg/L), respectively. Ultrastructural analysis showed that the stroma and grana of chloroplast basically remained normal. However, plant cells from the control experiment (untreated with chitosan) were vacuolated and the cell interval increased. The relict of protoplast moved to the center, with cells tending to disjoint. Our findings indicate that wastewater with high COD concentration can cause a substantial damage to submersed plant, nevertheless, chitosan probably could alleviate the membrane lipid peroxidization and ultrastructure phytotoxicities, and protect plant cells from stress of high COD concentration polluted water.     

Removal of cadmium using MnO2 loaded D301 resin

MnO2 loaded weak basic anion exchange resin D301 （Anion exchange resin, macroreticular weak basic styrene） as adsorbent has been prepared and applied to the removal of cadmium. The adsorption characteristics have been investigated with respect to effect of pH, equilibrium isotherms, removal kinetic data, and interference of the coexisting ions. The results indicated that the Cd^2＋ could be efficiently removed using MnO2 loaded D301 resin in the pH range of 3-8 from aqueous solutions with the co-existence of high concentration of alkali and alkaline-earth metals ions. The saturate adsorption capacity of the Cd^2＋ was 77.88 mg/g. The adsorption process followed the pseudo first-order kinetics. The equilibrium data obtained in this study accorded excellently with the Langmuir adsorption isotherm.     

Effect of coagulation pretreatment on the fouling of ultrafiltration membrane

The purpose of this study is to understand the effect and mechanism of preventing membrane fouling, by coagulation pretreatment, in terms of fractional component and molecular weight of natural organic matter （NOM）. A relatively higher molecular weight （MW） of hydrophobic compounds was responsible for a rapid decline in the ultrafiltration flux. Coagulation could effectively remove the hydrophobic organics, resulting in the increase of flux. It was found that a lower MW of neutral hydrophilic compounds, which could remove inadequately by coagulation, was responsible for the slow declining flux. The fluxes in the filtration of coagulated water and supernatant water were compared and the results showed that a lower MW of neutral hydrophilic compounds remained in the supernatant water after coagulation could be rejected by a membrane, resulting in fouling. It was also found that the coagulated flocs could absorb neutral hydrophilic compounds effectively. Therefore, with the coagulated flocs formed on the membrane surface, the flux decline could be improved.     

Penetration analysis of elements and bioleaching treatment of spent refractory for recycling

Acidithiobacillus ferrooxidans ATCC23270 and Acidithiobacillus thiooxidans TM-32 were used for bioleaching of spent refractories of aluminium and copper melting furnaces for their recycling.Firstly,penetration of elements into aluminium melting furnace refractory was investigated and it was found that up to 7 cm from surface was contaminated.Comparison on leaching efficiency by the strains ATCC23270 and TM-32 found that the strain ATCC23270 could treat larger amount of the refractories than the strain TM-32 could do.In the experiment of bioleaching of spent refractory aluminium melting furnace by the strain ATCC23270,high leaching efficiency were obtained on Al,Si,and Ca,and extremely low leaching performance was,however,shown on the rest of elements i.e.,Na,Mn,and Zn.Under the strain TM-32 use,relatively high leaching performance was recognized on Al,Si,Ca,Na,Mn,and Zn.In the experiment of bioleaching for spent refractory copper melting furnace,almost the same leaching trends were shown on Cu,Zn,Al,and Si under the strains ACTT23270 and TM-32 uses.     

Evaluation of phytoextracting cadmium and lead by sunflower, ricinus, alfalfa and mustard in hydroponic culture

Soil contaminated with heavy metals cadmium(Cd)and lead(Pb)is hard to be remediated.Phytoremediation may be a feasible method to remove toxic metals from soil,but there are few suitable plants which can hyperaccumulate metals.In this study,Cd and Pb accumulation by four plants including sunflower(Helianthus annuus L.),mustard(Brassica juncea L.),alfalfa(Medicago sativa L.), ricinus(Ricinus communis L.)in hydroponic cultures was compared.Results showed that these plants could phytocxtract heavy metals, the ability of accumulation differed with species,concentrations and categories of heavy metals.Values of BCF(bioconcentration factor)and TF(translocation factor)indicated that four species had dissimilar abilities of phytoextraction and transportation of heavy metals.Changes on the biomass of plants,pH and Eh at different treatments revealed that these four plants had distinct responses to Cd and Pb in cultures.Measurements should be taken to improve the phytoremediation of sites contaminated with heavy metals,such as pH and Eh regulations,and so forth.