Directions for hazardous waste storage and final disposal of treated hazardous waste (THW) in Austria

Austria produces about 700,000 tons of hazardous waste a year. Approximately 8% are sent to the incinerating facility EBS near Vienna. Approximately 60% THW (treated hazardous wastes) are finally disposed of. An unknown amount is sent to foreign countries for storage and landfilling.

By order of the Ministry of Agriculture and the Ministry of Public Health our institute elaborates guidelines for designing and operating final disposal hazardous waste facilities.

This paper deals with the fundamental aspects and the present state of these guidelines.     

国外关于稳定化/固化的有毒有害污染物的渗漏实验方法的研究进展

以水泥为基质的稳定化 /固化 (Stabilization/solidification)的方法在国外广泛用于无机、有机、有毒有害污染物的最终处置 ,已经有数十年的历史。论文较全面地介绍了拟合被这种稳定化 /固化过程处理过的污染物在自然界条件下短期和长期的污染物泄漏过程 ,即所谓短期、长期的渗漏行为的实验方法和数学模型 ,并总结了现有几种用来模拟短期或长期渗漏行为的渗漏实验方法和适用于这些实验方法的数学预测模型的应用条件。     

危险废物安全填埋场的环境经济分析

遵循国家颁布的《中华人民共和国固体废物污染环境防治》、对工业固体废物中危险废物处理处置技术和方法进行系统研究,推荐采用安全填埋法处置工业危险废物。从环境经济角度论证安全填埋法方案可行性,采用效益费用分析法对实例进行分析,最终得出安全填埋法方案的实用性,可行性结论。     

Thermogravimetric coupled with Fourier transform infrared analysis study on thermal treatment of monopotassium phosphate residue

In China, safe disposal of hazardous waste is more and more a necessity, urged by rapid economic development. The pyrolysis and combustion characteristics of a residue from producing monopotassium phosphate (monopotassium phosphate residue), considered as a hazardous waste, were studied using a thermogravimetric, coupled with Fourier transform infrared analyzer (TG-FTIR). Both pyrolysis and combustion runs can be subdivided into three stages: drying, thermal decomposition, and final devolatilization. The average weight loss rate during fast thermal decomposition stage in pyrolysis is higher than combustion. Acetic acid, methane, pentane, (acetyl) cyclopropane, 2,4,6-trichlorophenol, CO, and CO₂ were distinguished in the pyrolysis process, while CO₂ was the dominant combustion product.     

医疗废物非焚烧处理技术述评

文章从提出医疗废物的危害性入手,介绍了我国当前的医疗废物管理和处理处置现状。通过分析和比较蒸汽灭菌法、热裂解法、微波处理法、等离子体法等几种处理方法,寻求适宜我国国情的医疗废物处理方法。     

加强城市固体废物污染防治促进循环经济的发展

为加强城市固体废物污染防治，促进循环经济的发展，文章论述了国内外城市固体废物污染防治现状，天津市固体废弃污染防治对策，“十五”期间天津市固体废物污染防治的十大工程项目。     

Evaluation of recycling waste materials and by-products in highway construction

SUMMARY

The generation, handling, and safe disposal of waste materials has become a major concern in North America. Approval of facilities for waste processing and proper disposal is becoming more difficult to obtain. Furthermore, there is a growing public awareness of the importance of conserving and preserving our valuable natural resources. This expanding awareness has given rise to the trend towards recycling or reuse of awide variety of solid wastes. Experiences with using waste materials in highway construction can vary considerably, depending on material characteristics, construction processes, and climatic differences. A number of waste materials may be suitable for use in highway construction, but others may not. The objective of this paper is introduced in two tasks. The first is to include a survey of the waste materials and by-products that have been used successfully, or may be used, as materials for highway construction or maintenance work. This also includes determination of the state of practice concerning economic and technical factors for these wastes. The second is to rank these materials based on three criteria: number of uses by State agencies, economic uses and performance aspects.     

Hospital waste generation and management in some provinces of Iran

The purpose of this investigation was to determine the rate of generation of different kinds of hospital waste and its management in 11 provinces of Iran in 2012. Waste samples were separated into two categories (domestic type and infectious waste) and weighed daily for 4 weeks, distributed over four seasons to determine quantities and composition. Data on waste management were collected through a questionnaire and interviews of hospital personnel. The total generation of hospital waste ranged from 2.3 to 4.6 kg bed-day^?1 for Razavi Khorasan and Sistan &; Baluchistan provinces. Generation of infectious waste varied from 1.0 to 1.7 kg bed-day^?1 for Sistan &; Baluchistan and Markazi provinces. The lowest and highest percentages of infectious waste generation were found in Golistan (3.8%) and Fars (15.3%). It was also revealed that management of sharps, infectious, and other hazardous wastes was not properly done. A segregation program must be implemented and each fraction of hospital waste must be collected and disposed of separately.     

废旧线路板中贵金属湿法浸出技术研究进展

废旧线路板(WPCB)的数量逐年增长,妥善处理废旧线路板不仅体现其回收利用价值,并且具有可观的环境效益.湿法处理废旧线路板工艺成熟,具有流程短、效率高的优点.本文综述了废旧线路板中贵金属(主要以金为例)浸出方法的研究状况,并从效率、环境影响、成本等方面对不同方法进行了比较.分析表明,硫脲法和碘化法浸出效率高、环境影响小、成本可控,是较优的浸出方法.合理、有效地处置废旧线路板,减少处置过程中的环境污染并高效回收贵金属,需要考虑不同方面的因素,多种浸出与富集回收方法共同使用,以达到最佳贵金属回收效果.     

北京市非正规垃圾填埋场垃圾成分特性

通过北京市3处典型非正规垃圾填埋场与1处正规垃圾卫生填埋场对比研究,结果表明,非正规垃圾填埋场与正规垃圾填埋场陈腐垃圾物理组成相近,但非正规垃圾填埋场有机物含量更低,同时垃圾分布不均匀;以建筑渣土为主的区域有机质含量一般低于5%;以生活垃圾为主的区域有机质含量与正规垃圾场相近,一般高于10%,内部最高温度可达42℃左右。     

Kinetics and thermodynamics studies of cobalt,strontium and caesium sorption on marble from aqueous solution

Adsorption onto solid phases plays an important role in the transport of radionuclides and contaminants in the environment. Radionuclides in radioactive waste have been considered to be hazardous pollutants, and their migration with groundwater is strongly affected by sorption on the geologic media. Therefore, the knowledge of radionuclide sorption is of great importance in the management of radioactive wastes. A series of batch sorption experiments were conducted separately to investigate sorption and transport behaviour of cobalt, strontium and caesium on and through marble. Batch-mode kinetic and equilibrium studies have been carried out at different temperatures. Sorption experimental data were analysed by kinetic and isotherm models. Based on the results obtained, it can be concluded that the marble is an economic and efficient retaining material for environmental hazardous migration and/or leakage of some radionuclides. Therefore, this study could be used as a starting point to establish and consider that rock as a reactive barrier around the disposal facilities at the nuclear activity centres.     

Industrial solid waste flow analysis of eco-industrial parks: implications for sustainable waste management in China

Sustainable waste management in the industrial ecology perspective brings enormous challenges to the existing methodology of waste analysis at the industrial park (IP) scale. In this study, a four-step method was proposed for industrial solid waste (ISW) flow analysis of eco-industrial parks (EIPs) and applied to two IPs in eastern China. According to a park-wide census of 619 industrial enterprises and 105 questionnaires by a survey from 2006 to 2008, the results indicated that: 1) at the enterprise scale, more than 60% of enterprises were small-ISW-generation enterprises which encountered great difficulties on effective waste management; 2) at the IP scale, though the two IPs have set up their own environmental management systems and passed the ISO 14001 certification, the efficiencies of the ISW management systems have yet to be improved in the industrial ecology perspective; and 3) at the regional scale, more than 97% of ISW flowed within the provincial region, indicating that the provincial governments prevented the wastes from flowing into their own “back yard”. Effective waste management should be placed in a broader perspective. Approaches to sustainable waste management may include wastes exchange, efficient waste and information flow, virtual EIP, waste minimization clubs and regionalization of waste management.     

我国城市垃圾及其处理的现状、问题与对策

分析了我国城市垃圾产生和处理的现状，探讨了城市垃圾处理的主要方法及其特点，指出了当前城市垃圾处理中存在的体制、资金和技术等问题，并提出了相应的管理对策。     

Ecofriendly approach of urban solid waste management: a case study of Jalgaon city, Maharashtra

In India, the traditional methods are used for urban solid waste management. These practices are associated with degradation of the urban environment Hence, an environmentally sound garbage management system is required for the urban waste management. The concept of waste minimization needs to be adopted in such systems. It is possible to implement certain corrective measures at collection, storage, transport and disposal of urban solid waste to minimize the adverse impacts on the environment The present investigations are emphasized on generation, characterzation and ecofriendly disposal of solid waste generated in Jalgaon city, Maharashtra. In the present study the waste generation at source was studied in the various income groups of the city. The per capita waste generation was studied by sampling the waste directly from the source of generation. The study reveals that the waste generation is large in the high-income group followed by middle and low-income group public. Further the physicochemical characterization of the waste was also studied. The data generated will help to develop environmentally sound and economically feasible solid waste management system for Ihe city.     

Assessment of key parameters in municipal solid waste management: a prerequisite for sustainability

Municipal solid waste management was studied for 1 year in a representative urban area of Lahore city for environmental sustainability. The effects of financial status of the household and the seasonal variations on generation rate and compositions of municipal solid waste (MSW) were determined. MSW generation rate and the economic status of the households were positively correlated (p < 0.05). Seasonal variations observed were significant only for organics (p = 0.001), plastics (p = 0.008) and food waste fractions (p = 0.009) in MSW. Response surface regression model developed and analysed by Minitab-15® showed that the interaction of season and different economic zones of the town on the MSW generation rate was non-significant (p = 0.334). Elemental and heating value analyses of the mixed organic fractions in kitchen waste had carbon 47.93%, hydrogen 6.20%, nitrogen 2.24%, sulphur 0.23%, oxygen 39.01%, and C and N ratio 27.78. Findings concluded that food waste was 56% of total MSW with 71.03% moisture content and a modest heating value of 5566 J/g. Existing temporary storage capacity of MSW is 51% of the total MSW generated considering the weighted MSW generation rate of 0.57 kg/person/day calculated in this study. Composting could be a possible final disposal option due to high moisture and organic content and can be studied in future research. Development of a transfer station, introduction of home composting programmes and awareness towards proper segregation and reduction of waste at the household level is suggested to attain sustainability in the MSW management system.     

Effectiveness of aerobic pretreatment of municipal solid waste for accelerating biogas generation during simulated landfilling

Effect of aerobic pretreatment of MSW on landfill gas generation was investigated. Volatile solid (VS) loss of MSW is an effective and comparable indicator. Chinese MSW requires at least a reduction of VS about 27% (w/w) prior to disposal. Aerobic pretreatment of MSW reduced lag phase more than 90% before methanogenesis. Aerobic pretreatment degree influences quantity of gas generation. This study evaluates the effectiveness of aerobic pretreatment of municipal solid waste (MSW) on reducing lag phase and accelerating biogas generation. Aerobic pretreatment degree (APD) was determined on the basis of reduction in volatile solids (VS) on a wet weight basis. In this study, intermittent aeration (IA) was applied to three reactors as a main aeration mode; since a single reactor was operated under continuous aeration mode. However, the purpose of the experiment was to reduce VS content of waste, irrespective of the comparison between aeration modes. Fresh MSW was first pretreated aerobically with different aeration rates (10, 40, 60 and 85 L/min/m³) for the period of 30–50 days, resulting in VS-loss equivalent to 20%, 27%, 38% and 53% on w/w basis for the wastes A1, A2, A3 and A4, respectively. The cumulative biogas production, calculated based on the modified Gompertz model were 384, 195, 353, 215, and 114 L/kg VS for the wastes A0, A1, A2, A3 and A4, respectively. Untreated waste (A0) showed a long lag phase; whereas the lag phases of pretreated MSW were reduced by more than 90%. Aerobically pretreated wastes reached stable methanogenic phase within 41 days compared to 418 days for untreated waste. The waste mass decreased by about 8% to 27% compared to untreated MSW, indicative that even more MSW could be placed in the same landfill. The study confirmed the effectiveness of aerobic pretreatment of MSW prior to landfilling on reducing lag phase and accelerating biogas generation.     

Untersuchung von Abfällen mit biologischen Testverfahren zur Bewertung der Wassergefährdung

Wastes from three different types of waste treatment facilities were examined with bioassays to determine their hazard potential to waters (→Part I). All examined wastes showed toxic effects and have to be classified as hazardous to waters according to section 19g of the German Federal Water Management Act. The toxicity is probably caused by heavy metals in the leachates, especially copper. An evaluation pattern to classify wastes in the German system of Water Hazard Classes is presented. According to this proposal, a classification of the examined wastes into Water Hazard Class 1 seems to be appropriate. This classification does not describe the hazards resulting from the regular disposal on a landfill or from the utilisation of the treated wastes.     

Physico-chemical characteristics of fine fraction materials from an old crystal glass dumpsite in Sweden

Physico-chemical characteristics of waste, particularly fine fraction (FF), from an old crystal glass waste dump in Sweden were studied to assess recycling or disposal alternatives. Hand-sorting of the waste indicated glass content of 44.1% while sieving established the FF as a more soil-like mix of glass and other materials constituting 33.3% of all excavated waste. The FF was around neutral pH with 24.4% moisture content, low values of Total Dissolved Solids, Dissolved Organic Carbon and fluorides, but hazardous concentrations of As, Cd, Pb and Zn according to the Swedish Environmental Protection Agency guidelines. While the FF leached metals in low concentrations at neutral pH, it leached considerably during digestion with nitric acid, implying leaching risks at low pH. Thus, the waste requires safe storage in hazardous waste class ‘bank account’ storage cells to avoid environmental contamination as metal recovery and other recycling strategies for the glass waste are being developed. The study could fill the information gap regarding preservation of potential resources in the on-going, fast-paced excavation and re-landfilling of heavy metal contaminated materials in the region.     

焚烧源二噁英的排放对周边土壤和植被污染的研究进展

经济的飞速发展和城市化进程的加快,带来了严重的生活垃圾负荷问题。垃圾焚烧技术因其具有减容化、无害化和资源化的优点,成为当今国际社会生活垃圾处理的主要技术之一。然而由于人们对于垃圾焚烧源可能产生的二噁英污染问题缺乏一个全面的认识,使得垃圾焚烧厂的建立遭到了民众的强烈反对,成为影响社会和谐稳定的因素;因此,需要对垃圾焚烧源二噁英的排放对周边土壤和植被的污染状况进行综述,对于解决老百姓对于垃圾焚烧二噁英污染的争议有巨大的现实意义。对近年来国内外学者在相关方面的研究进行了详细地综述,结果发现：国内已开展的研究仅限于二噁英对焚烧厂周边土壤的污染调查,而对于焚烧源二噁英对植被及农作物的污染的研究数据非常匮乏;而国外学者已开展的垃圾焚烧厂周边土壤和植被中二噁英污染的调查研究只是停留在二噁英在土壤和植被中总浓度的研究基础上,而对于不同二噁英同族物在焚烧厂附近土壤和植被中的分布特征和蓄积规律方面的研究比较缺乏,尤其是在其他污染源如废弃物的露天燃烧、交通等协同作用下,垃圾焚烧对二噁英污染贡献率的研究比较少,对于垃圾焚烧厂二噁英污染的控制没有起到直观的指导作用。本文指出今后的研究应加强对二噁英在焚烧厂周边土壤和植被中分布特征和蓄积规律研究,这对于焚烧源二噁英的污染防治以及对已被二噁英污染的土壤和植被的生态修复具有重要的意义。