城市生活垃圾处理技术现状与管理对策

近年来,我国城市生活垃圾产生量每年以约10%的速度迅猛增长,而城市生活垃圾处理能力发展相对滞后。客观评述城市生活垃圾常用的填埋、焚烧、堆肥3种处理技术的优缺点和在国内的应用现状,并针对城市生活垃圾在收运、处理以及管理等环节中存在的突出问题,提出了明确的建议与措施：首先,完善相关法规政策,实施分类收集,加强源头控制;其次,创新管理体制,推行市场化运作机制,政府加强政策引导和监督;再次,按照＂谁污染,谁付费＂的原则,建立健全垃圾收费体系;最后,充分利用各种媒介,加大宣传力度,提高公众环保意识。同时,还探讨了城市生活垃圾处理技术发展的趋势。焚烧处理将是今后一段时期我国最有发展潜力的技术,气化熔融焚烧技术是一种高效资源化、污染物接近零排放的新型焚烧技术;生物反应器填埋技术可减少渗滤液处理量、降低垃圾处理成本,具有广阔的发展前景;堆肥技术可作为焚烧或填埋之前的预处理手段;城市生活垃圾综合处理集多种处理技术的优点于一体,在节约处理成本,提高经济效益的同时,实现了垃圾的减量化、资源化、无害化,是未来我国生活垃圾处理的优先发展方向。     

城市生活垃圾治理过程的能源化技术

论述了垃圾多种治理技术以及这些技术中的能源化的关键。这些技术涉及垃圾卫生填埋、垃圾梦烧、垃圾衍生燃料技术、垃圾厌氧发酵和垃圾的热解气化等。针对中国垃圾的具体特点，对中国垃圾能源化提出一些初步方案和建议。     

Levels and patterns of polychlorinated biphenyls in residues from incineration of established source-classified MSW in China

Municipal solid waste (MSW) source-classified collection represents an advancement in resource cycling and secondary pollution control in China. Comparative experiments were performed to assess the levels and patterns of polychlorinated biphenyls in bottom ash, fly ash from boiler, and fly ash from bag filter from an MSW incineration plant with source-classified collection of MSW. Polychlorinated biphenyls were concentrated in the bag filter fly ash and in the bottom ash. The total amount of polychlorinated biphenyls was much lower than in fly ashes and bottom ash from traditional mixed waste incineration. Total concentration of coplanar polychlorinated biphenyls and toxic equivalent quantities were also reduced. Due to variations of feed waste, complete combustion, including continuously high incineration temperature, low CO concentrations and high air excess ratio were observed. Incineration temperature showed a negative correlation, while CO concentration showed a positive correlation with total and coplanar polychlorinated biphenyls, indicating that the latter can be reduced by controlling combustion conditions related to properties of feed waste.     

Recycling combustibles from aged municipal solid wastes (MSW) to improve fresh MSW incineration in Shanghai: Investigation of necessity and feasibility

Aged municipal solid wastes (MSW) excavated from landfills and dumpsites were characterized to analyze their fraction composition, moisture content, and lower heat value (LHV). The necessity and feasibility of recycling combustibles from aged MSW to improve the incineration of fresh MSW were investigated. The results showed that combustibles in aged MSW were easily separated from other components and than LHV of the separated combustibles are higher than 11000 kJ/kg. The fresh MSW are of high moisture contents with average LHV below 6500 kJ/kg, making their stable combustion difficult to maintain in MSW incinerators. For both fresh MSW and aged MSW, plastics are the main contributor to their LHV. To improve incineration of fresh MSW that are characterized with low LHV, combustibles separated from aged MSW were made into refuse derived fuel (RDF) pellets and were then added to fresh MSW by 2% wt.–5% wt. LHV variation and air supply resistance change of the MSW layer on the incinerator grate caused by the addition of RDF was checked, and no significant changes were found. No obvious difference was observed for the ‘burn-out time’ between RDF pellets and fresh MSW either. RDF made from aged MSW combustibles is found to be a promising auxiliary fuel to improve the incineration of fresh MSW, and aged MSW from old landfill cells and dumpsites can be finally disposed of jointly with fresh MSW by recycling combustible from the former to be coincinerated with the latter in the incineration plants.     

Assessment of key parameters in municipal solid waste management: a prerequisite for sustainability

Municipal solid waste management was studied for 1 year in a representative urban area of Lahore city for environmental sustainability. The effects of financial status of the household and the seasonal variations on generation rate and compositions of municipal solid waste (MSW) were determined. MSW generation rate and the economic status of the households were positively correlated (p < 0.05). Seasonal variations observed were significant only for organics (p = 0.001), plastics (p = 0.008) and food waste fractions (p = 0.009) in MSW. Response surface regression model developed and analysed by Minitab-15® showed that the interaction of season and different economic zones of the town on the MSW generation rate was non-significant (p = 0.334). Elemental and heating value analyses of the mixed organic fractions in kitchen waste had carbon 47.93%, hydrogen 6.20%, nitrogen 2.24%, sulphur 0.23%, oxygen 39.01%, and C and N ratio 27.78. Findings concluded that food waste was 56% of total MSW with 71.03% moisture content and a modest heating value of 5566 J/g. Existing temporary storage capacity of MSW is 51% of the total MSW generated considering the weighted MSW generation rate of 0.57 kg/person/day calculated in this study. Composting could be a possible final disposal option due to high moisture and organic content and can be studied in future research. Development of a transfer station, introduction of home composting programmes and awareness towards proper segregation and reduction of waste at the household level is suggested to attain sustainability in the MSW management system.     

Development and prospects of municipal solid waste (MSW) incineration in China

With the lack of space for new landfills, municipal solid waste (MSW) incineration is playing an increasingly important role in municipal solid waste management in China. The literatures on certain aspects of incineration plants in China are reviewed in this paper, including the development and status of the application of MSW incineration technologies, the treatment of leachate from stored MSW, air pollution control technologies, and the status of the fly-ash control method. Energy policy and its promotion of MSW-to-energy conversion are also elucidated.     

Economics analysis of food waste treatment in China and its influencing factors

• Economics of food waste treatment projects at 29 pilot cities in China was examined. • Roles of location, population size, processing technique, and income were studied. • Economic benefits were limited with a profit to cost ratio of 0.08±0.37. • Service population size affects construction economics significantly (P = 0.016). • Choice of food waste processing technique affects operating economics notably. This study examines the economic benefits of food waste treatment projects in China and factors affecting them. National-level pilot projects for food waste treatment located in 29 cities were selected as samples. The economics of food waste recycling from the investors’ perspective, in terms of investment during the construction phase and cost and benefit during the operation phase, was assessed. Results indicate that the average tonnage investment of food waste treatment projects was RMB 700.0±188.9 thousand yuan, with a profit to cost ratio of 0.08±0.37. This ratio increased to 0.95±0.57 following the application of government subsidies. It highlights the limited economic benefits of food waste treatment facilities, which rely on government subsidies to maintain their operations in China. Further analysis using a multi-factor analysis model revealed that regional location, service population size, processing techniques, and urban income exerted varying impacts on the economy of food waste treatment. Population size exerted the highest impact (P = 0.016) during the construction stage, and processing techniques notably influenced the project economy during the operation stage. The study highlights the need to prioritize service population size and processing techniques during economic decision-making and management of food waste recycling projects. The results of this study can serve as a valuable practical reference for guiding future policies regarding food waste treatment and related planning.     

Repercussions of COVID-19 pandemic on solid waste generation and management strategies

• Implication of COVID-19 on medical waste and MSW generation is studied. • Challenges and effective strategy of solid waste generation is reviewed. • 2.9 million tons of COVID-19 related medical waste has been generated until Sep. 22. • The pandemic has postponed policies related to the reduction of plastic use. • Blockade resulted in a significant drop in waste generation in some regions. It has been over ten months since the beginning of the 2019 coronavirus disease (COVID-2019), and its impact on solid waste management, especially medical waste, is becoming clearer. This study systematically reviews the potential influences of the COVID-19 pandemic on medical waste, personal protection equipment waste and municipal solid waste (MSW), and discusses the corresponding measures and policies of solid waste management in typical countries. The results show that the generation of medical waste from the pandemic increased significantly, with 18%‒425% growth. It is estimated that the daily output of COVID-19 medical waste increased from 200 t/d on Feb. 22 to over 29000 t/d at the end of September 2020 throughout the world. The use of personal protective equipment will continue to grow in the long-term, while the blockade and isolation measures greatly reduced the volume of commercial waste, especially for tourist cities, and part of this waste was transferred to household waste. Residents’ attitudes and behavior toward food waste have changed due to the COVID-19 pandemic. In response to the pandemic, international organizations and several countries have issued new policies and guidelines and adjusted their management strategies for medical waste and MSW treatment. The pandemic has brought specific challenges to the disposal capacity of medical waste worldwide. It has also brought about the stagnation of policies related to the reduction of plastic products and waste recycling. This study will provide some useful information for managers and governmental officials on effective solid waste management during and after the COVID-19 pandemic.     

Development of machine learning multi-city model for municipal solid waste generation prediction

● A database of municipal solid waste (MSW) generation in China was established. ● An accurate MSW generation prediction model (WGMod) was constructed. ● Key factors affecting MSW generation were identified. ● MSW trends generation in Beijing and Shenzhen in the near future are projected. Integrated management of municipal solid waste (MSW) is a major environmental challenge encountered by many countries. To support waste treatment/management and national macroeconomic policy development, it is essential to develop a prediction model. With this motivation, a database of MSW generation and feature variables covering 130 cities across China is constructed. Based on the database, advanced machine learning (gradient boost regression tree) algorithm is adopted to build the waste generation prediction model, i.e., WGMod. In the model development process, the main influencing factors on MSW generation are identified by weight analysis. The selected key influencing factors are annual precipitation, population density and annual mean temperature with the weights of 13%, 11% and 10%, respectively. The WGMod shows good performance with R² = 0.939. Model prediction on MSW generation in Beijing and Shenzhen indicates that waste generation in Beijing would increase gradually in the next 3–5 years, while that in Shenzhen would grow rapidly in the next 3 years. The difference between the two is predominately driven by the different trends of population growth.     

21世纪城市生活垃圾生态化处理展望

我国目前由于管理，经济，技术以及公众环境意识的薄弱，城市生活垃圾已成为污染环境的一大公富，大致使大量有用资源浪费，就生态城市建设中垃圾生态化处理的重要性和对策进行了探讨，以期推动我国城市生活垃圾生态化处理和生态城市建设工作的开展。     

Carbon discharge through municipal solid waste in Haikou,China

With rapid urban development, municipal solid waste (MSW) has become a pressing issue. Estimation of carbon discharge through municipal solid waste provides a way to assess environmental load of solid waste from the viewpoint of the carbon cycle. With few studies on carbon research and provides insights into human impacts on the carbon cycle. Based on a comprehensive fieldwork investigation of a typical Chinese tourist city – Haikou City, Hainan Island – the characteristics of MSW carbon discharge and human activities that influenced it were analysed. The results indicated that, in 2001, the total carbon discharge from 261.9 Gg of MSW was 105.1 GgC per year, and 174.6 kgC per capita per annum. Carbon is discharged in the form of food scraps (24%), plastics (20%), wood (17%), fabrics (14%), paper (13%), and dust and stone (12%). If landfill received all the waste, 4.7% of MSW carbon would be transformed into methane, with a value of 4.9 GgC. Between 1991 and 1999, Haikou's per capita MSW carbon discharge increased by 59.9%, and total MSW carbon discharge increased by 124.9%. MSW carbon discharge in Haikou is significantly affected by the growth of residential expenditure and urbanisation. Local characteristics of tourism also influence Haikou's MSW carbon discharge, not only in terms of its yearly variation, but also its monthly variation. Integrating data on carbon discharge with carbon consumption will provide a systematic view of the carbon metabolism in urban ecosystems, and further insights into the generation of urban environmental pollution.     

城市固体废弃物的预处理系统研究

对城市生活垃圾处置前进行有效的预处理，不仅可以减少处理量，提高处理的效果，而且可以回收部分资源性物质。由于垃圾的特性多变及处理方式的不同，统一的处理系统不仅难以达到处理垃圾的要求，而且可能造成不必要的浪费。文章针对垃圾焚的需求以及垃圾的特点，分析了垃圾焚烧炉预处理系统的设计和设计设备参数的确定，并介绍了与循环流化床垃圾焚烧炉配套的预处理系统。     

Modeling and simulation of landfill gas production from pretreated MSW landfill simulator

The cumulative landfill gas (LFG) production and its rate were simulated for pretreated municipal solid waste (MSW) landfill using four models namely first order exponential model, modified Gompertz model, single component combined growth and decay model and Gaussian function. Considering the behavior of the pretreated MSW landfill, a new multi component model was based on biochemical processes that occurring in landfilled pretreated MSW. The model was developed on the basis of single component combined growth and decay model using an anaerobic landfill simulator reactor which treats the pretreated MSW. It includes three components of the degradation i.e. quickly degradable, moderately degradable and slowly degradable. Moreover, the developed model was statistically analyzed for its goodness of fit. The results show that the multi components LFG production model is more suitable in comparison to the simulated models and can efficiently be used as a modeling tool for pretreated MSW landfills. The proposed model is likely to give assistance in sizing of LFG collection system, generates speedy results at lower cost, improves cost-benefit analysis and decreases LFG project risk. It also indicates the stabilization of the landfill and helps the managers in the reuse of the landfill space. The proposed model is limited to aerobically pretreated MSW landfill and also requires the values of delay times in LFG productions from moderately and slowly degradable fractions of pretreated MSW.     

北京市雨水资源综合利用与污染防治——迎绿色奥运,建生态北京

介绍了国内外雨水收集利用的情况,并针对北京水资源短缺和雨水资源大量浪费的现状,分析了北京市雨水资源收集和综合利用的前景,提出削减污染以及雨水综合利用的相关措施。北京天然雨水较清洁,然而经过在各种下垫面的冲刷后径流水质变差,初期径流污染物的含量相当大,甚至超过地表水环境质量标准的Ⅴ级。建议将初期降雨径流和后期雨水分开对待,将初期径流处理后再利用。     

沼气发酵在复合农业生态系统中的作用

沼气发酵系统是复合农业生态系统中物质循环和能量转化的枢纽。它以农业有机废弃物为原料，经厌氧消化，生产出高效、洁净、多用途的燃料、饲料和肥料。本文论说了开展沼气发酵对保护农村生态环境。促进生态农业发展所具有的重要意义，提出了目前我国沼气发展过程中存在的一些问题和今后应采取的措施。     

Assessment of popular techniques for co-processing municipal solid waste in Chinese cement kilns

• Municipal solid waste (MSW) was fermented, screened, gasified, then co-processed. • Co-processing MSW in cement kilns could cause excessive pollutant emissions. • Bypass flue gas can be disposed of through the main flue system. • Popular MSW co-processing methods do not affect cement quality. Cement kiln co-processing techniques have been developed in the past 20 years in China, and more than 60 factories now use fermentation, screening, and gasification pre-treatment techniques to co-process municipal solid waste (MSW). There three complete MSW pre-treatment techniques, co-processing procedures, and environmental risk assessments have been described in few publications. In this study, we assessed the effectiveness of each technique. The results suggested that the pollutant content released by each pre-treatment technology was lower than the emission standard. To reveal the mechanisms of pollutant migration and enrichment, the substances in the kiln and kiln products are investigated. The input of co-processing materials (Co-M) produced by fermentation caused formation of polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/Fs) in the bypass flue gas (By-gas) in excess of the regulatory standard. The Co-M input produced by the screening and gasifier technologies caused the total organic carbon (TOC) concentration to exceed the standard. In addition, the NO_x, TOC, and PCDD/Fs in the By-gas exceeded the regulatory standard. Raw meal was the primary chlorine and heavy metals input stream, and clinker (CK) and cement kiln dust (CKD) accounted for>90% of the total chlorine output stream. Flue gas and CKD were the primary volatile heavy metal (Hg) output streams. Greater than 70% of the semi-volatile heavy metals (Cd, Pb, Tl and Se) distributed in hot raw meal and bypass cement kiln dust. The low-volatility heavy metals were concentrated in the CK. These results indicated that co-processing techniques used in China still require improvement.     

电子废物现状评述与资源化初探

电子垃圾是目前增长速度最快的固体废物之一,对其不合理处置和利用已引起了日趋严峻的环境污染。文章从电子废物的危害及回收利用的角度,概述了当前国内外数量巨大的电子废物的污染现状及其回收利用处理技术,并结合国内实际,从电子废物的回收系统和资源化处理利用技术方面提出了具有可行性的建议和设想。     

End-of-life batteries management and material flow analysis in South Korea

Analysis of collection and recycling system of end-of-life batteries was examined. Relatively limited fractions of portable batteries were collected by EPR system. More effective and diverse collection pathways should be developed. Consumers increasingly have worn-out batteries as electrical and electronic equipment with new technical developments are introduced into the market and quickly replace older models. As a result, large amounts of end-of-life (EOL) or waste batteries are generated. Such batteries may contain a variety of materials that includes valuable resources as well as toxic elements. Thus, the proper recycling and management of batteries is very important from the perspective of resource conservation and environmental effect. The collection and recycling of EOL batteries is relatively low in South Korea compared to other countries, although an extended producer responsibility (EPR) policy was adopted for battery recycling in 2003. In this study, the management and material flow of EOL batteries is presented to determine potential problems and quantitative flow, based on literature review, site visits to battery recycling facilities, and interviews with experts in the Korea Battery Recycling Association (KBRA), manufacturers, and regulators in government. The results show that approximately 558 tons of manganese-alkaline batteries, the largest fraction among recycling target items, was disposed in landfills or incinerators in 2015, while approximately 2,000 tons of batteries were recovered at a recycling facility by simple sorting and crushing processes. By raising environmental awareness, more diverse and effective collection systems could be established for consumers to easily dispose of EOL batteries in many places. Producers, retailers and distributors in South Korea should also play an important role in the collection of EOL batteries from consumers. Lithium-ion batteries from many electronic devices must be included in the EPR system for resource recovery.     

中国废电池管理对策分析

针对废电池管理体系中存在的管理法规不完善，回收体系不健全，适宜的管理运行机制等问题，探讨了如何加强废电池环境无割化管理的方法，提出加强管理法规建设、完善废电池自愿、强制回收体系、     

Anaerobic digestion and recycling of kitchen waste: a review

About 1.6 billion tons of food are wasted worldwide annually, calling for advanced methods to recycle food waste into energy and materials. Anaerobic digestion of kitchen waste allows the efficient recovery of energy, and induces low-carbon emissions. Nonetheless, digestion stability and biogas production are variables, due to dietary habits and seasonal diet variations that modify the components of kitchen waste. Another challenge is the recycling of the digestate, which could be partly solved by more efficient reactors of anaerobic digestion. Here, we review the bottlenecks of anaerobic digestion treatment of kitchen waste, with focus on components inhibition, and energy recovery from biogas slurry and residue. We provide rules for the optimal treatment of the organic fraction of kitchen waste, and guidelines to upgrade the anaerobic digestion processes. We propose a strategy using an anaerobic dynamic membrane bioreactor to improve anaerobic digestion of kitchen waste, and a model for the complete transformation and recycling of kitchen waste, based on component properties.