Adsorptive removal of As(III) and As(V) from water and wastewaters using an anion exchanger derived from polymer-grafted banana stem

In this study, the adsorption characteristics of As(III) and As(V) from water and wastewater using polyacrylamide-grafted banana stem with quaternary ammonium functionality (PGBS-AE) were investigated. Infrared spectroscopic, and thermogravimetric analyses were performed to affirm the polymer grafting, functionality, morphology, and thermal stability. Batch experiments were carried out to understand the effect of contact time, concentration, pH, adsorbent dose, and temperature of the solution for the adsorption of As(III) and As(V) onto PGBS-AE. Equilibrium was achieved within 1 h and the optimum pH was found to be 9.0 and 3.0 for As(III) and As(V), respectively. Isotherm studies showed that the Langmuir equation fits best. Maximum adsorption capacities of 50 and 5.5?g?kg^?1 were obtained for As(III) and As(V) at 30°C. The endothermic nature of adsorption was evident as the adsorption efficiency increased with temperature. The thermodynamic parameters were evaluated to explain the feasibility of adsorption and to predict the nature of adsorption. The competence of the adsorbent for practical purposes was also analyzed by treating with a fertilizer industry effluent sample. Studies pertaining to adsorbent regeneration and readsorption of As(III) and As(V) were carried out for four consecutive cycles.     

Adsorption of vanadate(V) on Fe(III)/Cr(III) hydroxide waste

Adsorption of vanadate(V) from aqueous solution onto industrial solid ‘waste’ Fe(III)/Cr(III) hydroxide was investigated. HCl treated Fe(III)/Cr(III) hydroxide was found to be more efficient for the removal of vanadate(V) compared to untreated adsorbent. The adsorption follows second-order kinetics. Langmuir and Freundlich isotherms have been studied. The Langmuir adsorption capacity (Q ₀) of the treated and untreated adsorbents was found to be 11.43 and 4.67 mg g⁻¹, respectively. Thermodynamic parameters showed that the adsorption process was spontaneous and endothermic in the temperature range 32–60°C. Maximum adsorption was found at system pH 4.0. The adsorption mechanism was predominantly ion exchange. Effect of other anions such as phosphate, selenite, molybdate, nitrate, chloride, and sulfate on adsorption of vanadium has been examined.     

Adsorption of arsenic (V) by iron (III)-modified natural zeolitic tuff

Adsorption of arsenic (V) by natural zeolitic tuff, modified with iron (III), was investigated. Also, the iron (III) adsorption characteristics by natural zeolitic tuff was evaluated. It was determined that iron (III) adsorption by starting zeolitic tuff was best represented by the Freundlich type of isotherm, having correlation coefficient (r ²) of 0.990. Arsenic (V) adsorption by iron (III)-modified zeolitic tuff followed a nonlinear type of isotherm. The best fit of the experimental data was obtained using the Langmuir–Freundlich model (r ² = 0.99), with the estimated maximum of arsenic (V) adsorption to iron (III)-modified zeolitic tuff of 1.55 mg/g.     

Dual-functional sites for synergistic adsorption of Cr(VI) and Sb(V) by polyaniline-TiO2 hydrate: Adsorption behaviors,sites and mechanisms

• PANI/Ti(OH)_n^(4–n)+ exhibited excellent adsorption capacity and reusability. • Adsorption sites of Cr(VI) were hydroxyl, amino/imino group and benzene rings. • Sb(V) was adsorbed mainly through hydrogen bonds and Ti-O-Sb. • The formation of Cr-O-Sb in dual system demonstrated the synergistic adsorption. • PANI/TiO₂ was a potential widely-applied adsorbent and worth further exploring. Removal of chromium (Cr) and antimony (Sb) from aquatic environments is crucial due to their bioaccumulation, high mobility and strong toxicity. In this work, a composite adsorbent consisting of Ti(OH)_n^(4–n)+ and polyaniline (PANI) was designed and successfully synthesized by a simple and eco-friendly method for the uptake of Cr(VI) and Sb(V). The synthetic PANI/TiO₂ composites exhibited excellent adsorption capacities for Cr(VI) and Sb(V) (394.43 mg/g for Cr(VI) and 48.54 mg/g for Sb(V)), wide pH applicability and remarkable reusability. The adsorption of Cr(VI) oxyanions mainly involved electrostatic attraction, hydrogen bonding and anion-π interactions. Based on X-ray photoelectron spectroscopy and FT-IR analysis, the adsorption sites were shown to be hydroxyl groups, amino/imino groups and benzene rings. Sb(V) was adsorbed mainly through hydrogen bonds and surface complexation to form Ti-O-Sb complexes. The formation of Cr-O-Sb in the dual system demonstrated the synergistic adsorption of Cr(VI) and Sb(V). More importantly, because of the different adsorption sites, the adsorption of Cr(VI) and Sb(V) occurred independently and was enhanced to some extent in the dual system. The results suggested that PANI/TiO₂ is a promising prospect for practical wastewater treatment in the removal of Cr(VI) and Sb(V) from wastewater owing to its availability, wide applicability and great reusability.     

碳纳米管影响无机砷(As(III)和As(V))对大型蚤毒性的研究：特定砷形态的作用

作为一种新兴的纳米材料,羟基多壁碳纳米管(OH-MWCNTs)可能与其他污染物在水环境中共存,并进一步影响它们的毒性、输移和归趋。因此,评价碳纳米管存在下砷的毒性变化需要得到更多的关注。该试验探索了在不同pH值条件下,OH-MWCNTs诱导砷(As(III)和As(V))对水生生物大型蚤的毒性变化的潜在机制。发现了H₂AsO₃^-和H₂AsO₄^-是对大型蚤毒性最大的As(III)和As(V)。比较As(III)和As(V)的结果,发现pH值是影响砷毒性最重要的因素。此外,OH-MWCNTs影响砷对大型蚤毒性的结果表明,OH-MWCNTs的存在可以提高砷的毒性。通过吸附实验进一步研究了砷与OH-MWCNTs的相互作用。OH-MWCNTs 对As(V)吸附容量高于As(III)。总而言之, OH-MWCNTs对某些形态砷的吸附是解释砷毒性增强的可靠证据。
精选自Xinghao Wang, Ruijuan Qu, Ahmed A. Allam, Jamaan Ajarem, Zhongbo Wei, Zuoyao Wang. Impact of carbon nanotubes on the toxicity of inorganic arsenic [As(III) and As(V)] to Daphnia magna: the role of the certain arsenic species. Environmental Toxicology and Chemistry: Volume 35, Issue 7, pages 1852–1859, July 2016. DOI: 10.1002/etc.3340
详情请见http://onlinelibrary.wiley.com/doi/10.1002/etc.3340/full
     

Removal of arsenic (V) from aqueous medium using manganese oxide coated lignocellulose/silica adsorbents

Arsenic (V) adsorption on manganese oxide coated rice wastes was investigated in this study. The modified adsorbents were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and pH measurements to determine the point of zero charge. Batch adsorption equilibrium experiments were conducted to study the effects of pH, contact time, and initial concentration on arsenic removal efficiency. The adsorption capacity of rice waste was significantly improved after modification with permanganate. The Langmuir isotherm model fitted the equilibrium data better than the Freundlich model which confirms surface homogeneity of the adsorbent. Maxima adsorption capacities are determined as 10 and 12 mg/g at pH 3 for manganese oxide coated rice husk and straw, respectively. The adsorption energy indicates that the adsorption process may be dominated by chemisorption. Pseudo-second-order rate equation described the kinetics sorption of arsenic with good correlation coefficients, better than a pseudo-first-order equation. Manganese oxide coated rice husk and straw appear to be promising low cost adsorbents for removing arsenic from water.     

Adsorptive separation of phosphate oxyanion from aqueous solution using an inorganic adsorbent

Phosphate removal from aqueous solution was explored using granular ferric hydroxide (GFH) as an inorganic adsorbent. Adsorption, desorption and kinetic studies were conducted on laboratory scale to evaluate the performance of GFH as an adsorbent for low concentrations of phosphate solution. The effect of pH on adsorption was investigated, and phosphate uptake was shown to decrease with an increase in solution pH, with maximum removal seen to occur at pH 3. The experimental data best fit the Temkin isotherm at both pH 3 and 4. Uptake of phosphate by GFH follows second-order kinetics, with the small particle range (76–200 μm) removing phosphate from the solution more rapidly than the larger particle range (710–850 μm). The kinetic results suggest that intra-particle diffusion is an important factor in phosphate adsorption onto GFH. Thermodynamic parameters (ΔG°, ΔH°, ΔS°) were evaluated, and the results indicated that the adsorption process was endothermic and spontaneous. This study demonstrates that GFH has potential to be used as a cost-effective adsorbent for phosphate removal from aqueous solution.     

Enhancement of As(V) adsorption onto activated sludge by methylation treatment

Biosorption properties of arsenate [As(V)] onto activated sludge were investigated in batch systems. The adsorption of As(V) onto sludge increased from 23 to 266 μg/g dry weight through the methylation of the activated sludge. This increase resulted from neutralization of carboxylic groups via the methylation process. The pH effect of As(V) uptake was also investigated and As(V) adsorption by methylated sludge decreased significantly at high pH (pH > 11) due to competition between As(V) and OH⁻ ions for binding sites distributed on sludge surfaces. In contrast, low pH favored As(V) adsorption by methylated sludge because of the elevated quantities of positively charged functional groups. The results suggest that methylated activated sludge may provide promising applications for the simultaneous removal and separation of As(V) from aqueous effluents.     

Adsorptive features of banana (Musa paradisiaca) stalk-based activated carbon for malachite green dye removal

Chemically prepared activated carbon derived from banana stalk (BSAC) was used as an adsorbent to remove malachite green (MG) dye from aqueous solution. BSAC was characterised using thermogravimetric analyser, Brunauer Emmett Teller, Fourier transform infrared spectrometry, scanning electron microscopy, pH_pzc, elemental analysis and Boehm titration. The effectiveness of BSAC in adsorbing MG dye was studied as a function of pH, contact time, temperature, initial dye concentration and repeated desorption–adsorption processes. pH_pzc of BSAC was 4.5 and maximum dye adsorption occurred at pH 8.0. The rate of dye adsorption by BSAC was very fast initially, attaining equilibrium within 120 min following a pseudo-second-order kinetic model. Experimental data were analysed by Langmuir, Freundlich and Dubinin–Raduschevich isotherms. Equilibrium data fitted best into the Langmuir model, with a maximum adsorption capacity of 141.76 mg·g^?1. Δ G ⁰ values were negative, indicating that the process of MG dye adsorption onto BSAC was spontaneous. The positive values of Δ H ⁰ and Δ S ⁰ suggests that the process of dye adsorption was endothermic. The regeneration efficiency of spent BSAC was studied using 0.5 M HCl, and was found to be in the range of 90.22–95.16% after four cycles. This adsorbent was found to be both effective and viable for the removal of MG dye from aqueous solution.     

Removal of arsenate from water by adsorbents: a comparative case study

Laboratory and field filtration experiments were conducted to study the effectiveness of As(V) removal for five types of adsorbent media. The media included activated alumina (AA), modified activated alumina (MAA), granular ferric hydroxide (GFH), granular ferric oxide (GFO), and granular titanium dioxide (TiO₂). In laboratory batch and column experiments, the synthetic challenge water was used to evaluate the effectiveness for five adsorbents. The results of the batch experiments showed that the As(V) adsorption decreased as follows at pH 6.5: TiO₂ > GFO > GFH > MAA > AA. At pH 8.5, however, As(V) removal decreased in the following order: GFO = TiO₂ > GFH > MAA > AA. In column experiments, at pH 6.5, the adsorbed As(V) for adsorbents followed the order: TiO₂ > GFO > GFH, whereas at pH 8.5 the order became: GFO = TiO₂ > GFH when the challenge water containing 50 μg/L of As(V) was used. Field filtration experiments were carried out in parallel at a wellhead in New Jersey. Before the effluent arsenic concentration increased to 10 μg/L, approximately 58,000 and 41,500 bed volumes of groundwater containing an average of 47 μg/L of As(V) were treated by the filter system packed with GFO and TiO₂, respectively. The As(V) adsorption decreased in the following sequence: GFO > TiO₂ > GFH > MAA > AA. Filtration results demonstrated that GFO and TiO₂ adsorbents could be used as media in small community filtration systems for As(V) removal.     

Physicochemical properties of non-living water hyacinth (Eichhornia crassipes) and lesser duckweed (Lemna minor) and their influence on the As(V) adsorption processes

Eichhornia crassipes (Ec) and Lemna minor (Lm) are aquatic plants. They are considered as weeds of the water and approach being a scourge in many parts of the world, choking waterways and hindering transport upon them. At the same time they are known to readily remove heavy metal ions from water. This paper considers the use of non-living plants as novel and inexpensive biosorbent for the removal of As(V) from watersheds. In the first place they were conditioned and characterised to determine their physicochemical and surface properties and in the second place their adsorption properties for As(V) from aqueous solution were evaluated considering the toxicity of this metalloid in the environment. It describes the methodology to prepare the non-living biomasses; the physicochemical characterisation by SEM, XRD, FTIR, TGA analyses and surface characterisation of Ec and Lm by specific surface, hydration kinetic, point of zero charge determination by mass titration, active site density and XPS analysis are described. Both studied biomasses were found to be potential bio-sorbents for arsenic ions from aqueous solution. According to their efficiency to remove arsenic, they can be used in a very low cost metalloid ions removal system.     

焙烧态镁铝铁类水滑石对磷酸根离子的吸附

用共沉淀法制备了镁铝铁三元类水滑石(LDH),在不同温度下对其焙烧4 h,得到焙烧态类水滑石(CLDH).采用XRD、FT-IR对材料进行分析,研究其对水中磷酸根的吸附性能和机制.结果表明,铁的掺杂量过大会破坏类水滑石的层状结构,且随着铁含量的增大,类水滑石对磷酸根的吸附量逐渐减小.当Mg/Al/Fe物质的量之比为2∶0.9∶0.1,在300℃下焙烧时,CLDH吸附磷酸根能力最好,吸附容量约27.03 mg.g-1,为焙烧前的1.32倍.在pH 4—11范围内,在竞争离子存在的条件下,CLDH-0.1-300都能表现出较好的吸附性能,对实际废水中的磷也有较强的吸附能力.CLDH-0.1-300对磷酸根的吸附符合二级反应动力学模型,吸附等温线符合Langmuir等温式.用浓度为0.5 mol.L-1的NaOH溶液可以对吸附磷酸根后的类水滑石CLDH-0.1-300实现解吸再生,"吸附-再生-再吸附"循环3次后吸附容量仍接近初始值的60%.     

Constitutional tolerance and chlorophyll fluorescence of Boehmeria nivea L in response to the antimony (Sb) and arsenic (As) co-contamination

The metal tolerance and metabolic changes in Boehmeria nivea colonized in mining areas are not well known. A hydroponic experiment was conducted to evaluate the impact of antimony (Sb)+arsenic (As) in following combinations (control (no metal), 20+0, 10+10, 40+0, 20+20, and 40+40 mg/L) on phytotoxicity, metal tolerance index (MTI), and chlorophyll fluorescence in B. nivea. This constitutes an initial investigation of metal tolerance and chlorophyll fluorescence in Sb and Sb+As contaminated B. nivea. The high Sb+As 40+40 mg/L produced significant phytotoxicity and MTI in the plant. Progressive higher Sb and Sb+As levels resulted in decreased chlorophyll fluorescence of B. nivea. Exposure to intermediate and high Sb+As levels induced damage in the photosynthesis apparatus of the plant.     

Removal of cadmium(II), lead(II), and chromium(VI) ions from aqueous solution using clay

Removal of cadmium(II), lead(II), and chromium(VI) from aqueous solution using clay, a naturally occurring low-cost adsorbent, under various conditions, such as contact time, initial concentration, temperature, and pH has been investigated. The sorption of these metals follows both Langmuir and Freundlich adsorption isotherms. The magnitude of Langmuir and Freundlich constants at 30°C for cadmium, lead, and chromium indicate good adsorption capacity. The kinetic rate constants (K _ad) indicate that the adsorption follows first order. The thermodynamic parameters: free energy change (ΔG ^o), enthalpy change (ΔH ^o), and entropy change (ΔS ^o) show that adsorption is an endothermic process and that adsorption is favored at high temperature. The results reveal that clay is a good adsorbent for the removal of these metals from wastewater.     

As(V)-reduction to As(III) by arsenic-resistant Bacillus spp. bacterial strains isolated from low-contaminated sediments of the Oliveri-Tindari Lagoon,Italy

Five arsenic-resistant bacterial strains designated MT1, MT2, MT3, V1 and V2 were isolated from sediments of the Oliveri-Tindari Lagoon (Italy), which comprises six small lakes whose sediments contain low arsenic concentrations. Phylogenetic analysis of the 16S rRNA gene sequences assigned them to the genus Bacillus. Bacillus sp. strain MT3 showed higher tolerance to As(III) and As(V), as indicated by minimum inhibitory concentrations of 14 and 135 mmol^?1, respectively. Bacillus sp. strain V1 showed growth inhibition at 14 mmol^?1 in the presence of As(III) and at 68 mmol^?1 in the presence of As(V), whereas the arsenic resistance of Bacillus sp. strain MT1 was 10 and 27 mmol^?1 for As(III) and As(V), respectively. The strains Bacillus spp. MT2 and V2 showed low levels of As(III) and As(V) resistance, as it was unable to grow at concentrations>7 and 14 mmol^?1, respectively. The isolated arsenic-resistant Bacillus spp. strains were able to reduce As(V) to As(III), especially Bacillus spp. strain MT3. This study suggests that the isolated bacterial strains play a role in the arsenic biogeochemical cycle of arsenic-poor sediments in the Oliveri-Tindari Lagoon.     

Adsorption of cationic and anionic surfactants onto organic polymer resin Lewatit VPOC 1064 MD PH

The adsorption of a cationic (CTAB, cetyl trimethylammonium bromide) and an anionic surfactant (SLES, sodium dodecylethersulfate) from aqueous solution onto organic polymer resin (Lewatit VPOC 1064 MD PH) was studied. A series of batch experiments were performed to determine the sorption isotherms of surfactants to organic polymer resin. The experimental studies were analyzed by Langmuir and Freundlich isotherms. Furthermore, the isotherm parameters, average percentage errors (ε) of model data, and separation factor (R _L) were calculated. Other factors influencing the adsorption capacity (contact time, adsorbent amount, and initial surfactant concentration) were also discussed. The experimental data fitted very well to the Langmuir equilibrium model in the studied concentration range. The calculated R _L values showed that the adsorption of both surfactants were favorable. Among the surfactants, CTAB showed higher adsorption capacity onto organic polymer resin compared to SLES (Q ⁰ = 250 and 34.36 mg g⁻¹, respectively).     

Groundwater quality in the major industrial area of Thessaloniki,Greece part 1: Chemical composition‐geochemical processes

Adsorption rates of Sb(V) ions on an activated alumina (AA) were analyzed by batchwise experiments, while the continuous adsorption, desorption, regeneration of AA, and multiple reuse cycles were studied by flow column tests. The adsorption rates increased quickly with the increases of shaking speed and operation temperature. The adsorbed Sb(V) ions were desorbed easily by a 50 mM NaOH solution, and a 41–90 times concentrated Sb(V) solution was yielded correspondingly. AA was effectively regenerated by desorption operation and ca. 93% of the initial adsorption capacity was retained after six times adsorption/desorption cycles.     

Removal of chromium(VI) by ZnCl2 activated coir pith carbon

The adsorption of chromium(VI) onto ZnCl₂ activated carbon developed from coir pith was investigated to assess the possible use of this adsorbent. The influence of contact time, adsorbent dose, Cr(VI) concentration, pH and temperature were investigated. The two theoretical adsorption isotherms, namely, Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Q ₀) was found to be 120.5?mg Cr(VI) per g of the adsorbent. The adsorption followed the second-order kinetics and was found to be maximum at pH 2.0. The pH effect and the desorption studies showed that ion exchange mechanism might be involved in the adsorption process. The effects of foreign ions such as chloride, sulphate, phosphate, selenite, molybdate, nitrate and perchlorate on the removal of Cr(VI) have been investigated. The removal of Cr(VI) from synthetic ground water was also tested. The results show that ZnCl₂ activated coir pith carbon is effective for the removal of Cr(VI) from water.     

N-acyl homoserine lactone production by bacteria within the sponge Suberites domuncula (Olivi, 1792) (Porifera, Demospongiae)

Many bacteria live in close association with sponges. Within these consortia, molecules of communication such as quorum-sensing and hormone-like molecules may occur in order to regulate the partnership. Of particular interest, bacterial N-acyl-l-homoserine lactones (AHLs) were screened in supernatants from Suberites domuncula-associated bacteria using an E. coli bioluminescent reporter system. These sponge-associated bacteria were beforehand isolated on several media supplemented or not with a sponge extract to attempt to isolate sponge-specific bacteria. Out of 81 AHL-producing bacteria, three strains requiring sponge extract to grow were selected for AHL characterization. The in vitro produced AHLs, that is, in bacterial culture supernatants, were identified as N-(3-butanoyl)-l-homoserine lactone and N-(3-oxododecanoyl)-l-homoserine lactone and quantified using LC–ESI–MS/MS. The in vivo production of AHLs by sponge-associated bacteria has also been demonstrated in a healthy host for the first time: N-(3-oxododecanoyl)-l-homoserine lactone, N-(3-hexanoyl)-l-homoserine lactone, and N-(3-heptanoyl)-l-homoserine lactone. This AHL production in sponges may suggest a potential role of these molecules between sponge-associated bacteria and/or between sponge-associated bacteria and the sponge.     

砷浓度、形态及碳酸氢盐对蜈蚣草吸收砷的影响

为了探讨超富集植物蜈蚣草在处理高砷地下水方面的可行性,研究了水培条件下砷的浓度、形态和碳酸氢盐(HCO-3)对超富集植物蜈蚣草吸收砷的影响。实验中使用了浓度为0.1～100mg·L-1的As(III)和As(V)溶液。HCO-3处理中,HCO-3浓度范围为0.5～20mmol·L-1,As(III)或As(V)的浓度为5mg·L-1。结果表明,在水培条件下,蜈蚣草具有明显的耐高砷特征。当介质砷含量高达100mg·L-1时,砷的去除率可达到80%,且对As(III)的吸收效率高于As(V)。植物体内砷形态研究表明,蜈蚣草体内2种形态砷的含量与外源砷形态有一定的关系,As(V)处理条件下,植物体中的As(V)比例较As(III)处理高。高浓度的HCO-3(20mmol·L-1)处理对蜈蚣草地上部分生物量没有明显影响,但是抑制了地下部分的生长,并且对砷的吸收表现出明显的抑制作用。