A simple and cheap method for preparation of coupled ZrO2/ZnO with high photocatalytic activities

The objective of this study was to prepare a new photocatalyst with high activities for degradation of organic pollutants. Coupled ZrO₂/ZnO photocatalyst was prepared with a simple precipitation method with cheap raw materials zinc acetate and zirconium oxychloride, and was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Reactive brilliant red X-3B was used as a model compound to investigate the photocatalytic activity of synthesized catalysts in water under 254 nm UV irradiation. Results show that the optimal calcination temperature and coupling molar ratio of Zr were 350°C And 2.5%, respectively. At the calcination temperature of 350°C, ZrO₂ was dispersed on the surface of hexagonal ZnO in the form of amorphous clusters. The particle size of ZrO₂/ZnO decreased with the decrease of calcination temperature and the increase of Zr coupling amount. ZrO₂/ZnO has better photocatalytic activity for degradation of reactive brilliant red (RBR) X-3B than pure ZnO and P25-TiO₂.     

ZnO纳米丛的制备及其光催化性能研究

以沉淀法制备了高活性ZnO纳米丛(nanobushes,ZNB),以水热反应制备得到普通ZnO纳米颗粒(nanoparticles,ZNP).利用X射线衍射仪(XRD)、透射电镜(TEM)、扫描电镜(SEM)、比表面积测定仪(BET)和光致发光光谱(PL)等手段对ZNB和ZNP进行了表征,并比较了其光催化活性的差异.在紫外光(λ≤387 nm)照射40 min后ZNB使有机染料罗丹明B(Rhodamine B,RhB)完全褪色,而相同条件下ZNP仅能使RhB褪色53%.通过总有机碳(TOC)的测定,研究了ZnO对RhB深度氧化矿化程度,光照6 h后ZNB对RhB矿化率高达92%,而ZNP对RhB的矿化率只有77%.跟踪测定了光催化降解过程中活性氧化物种相对含量的变化,表明紫外光激发条件下,ZnO光催化反应机理主要涉及羟基自由基(.OH)历程,且ZNB产生活性氧化物种的量高于ZNP.     

Solar photocatalytic degradation of the herbicide isoproturon on a Bi–TiO2/zeolite photocatalyst

The photocatalytic degradation of the herbicide isoproturon under solar light was investigated in aqueous solution containing a Bi–TiO₂/zeolite photocatalyst. The catalysts were characterized using X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, Fourier transform-infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The effect of Bi–TiO₂ loading onto the zeolite support and influence of the parameters such as catalyst amount, pH, and initial concentration of isoproturon on the degradation rate were evaluated. The recycling ability of the catalyst was found to be sustainable for elongated periods. The high activity of the Bi–TiO₂/zeolite was attributed to its absorptivity of visible light and its high adsorption capacity for the pollutant molecules.     

Photocatalytic degradation of the diuron pesticide

The occurrence of chlorinated pesticides in wellwaters is a major problem of public health in Ivory Coast and other African countries. Here, we studied the photocatalytic degradation of the pesticide diuron in aqueous solution in presence of two commercial TiO₂ catalysts, P25 and PC500. The capacity of diuron adsorption at the TiO₂ surface is lower for both photocatalysts. The efficiency of photocatalytic degradation of diuron, it is higher using P25 Degussa than PC500 Millenium TiO₂ catalyst.     

Solar photocatalytic decomposition of two azo dyes on multi-walled carbon nanotubes (MWCNTs)/TiO<Subscript>2</Subscript> composites

Multi-walled carbon nanotubes (MWCNTs)/TiO₂ composite photocatalysts with high photoactivity were prepared by sol-gel process and further characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and UV-vis absorption spectra. Compared to pure TiO₂, the combination of MWCNTs with titania could cause a significant absorption shift toward the visible region. The photocatalytic performances of the MWCNTs/TiO₂ composite catalysts were evaluated for the decomposition of Reactive light yellow K-6G (K-6G) and Mordant black 7 (MB 7) azo dyes solution under solar light irradiation. The results showed that the addition of MWCNTs enhanced the adsorption and photocatalytic activity of TiO₂ for the degradation of azo dyes K-6G and MB 7. The effect of MWCNTs content, catalyst dosage, pH, and initial dye concentration were examined as operational parameters. The kinetics of photocatalytic degradation of two dyes was found to follow a pseudo-first-order rate law. The photocatalyst was used for seven cycles with photocatalytic degradation efficiency still higher than 98%. A plausible mechanism is also proposed and discussed on the basis of experimental results.     

TiO2 photocatalyzed degradation of diazinon in an aqueous medium

The photocatalytic degradation of diazinon was studied over TiO₂ catalysts. The kinetics obtained demonstrated that powder titania (t_1/2 = 9.7 min) was more efficient compared to pure titania thin film catalysts (t_1/2 = 29.4 min). Mineralization of organic carbon to CO₂ after 360 min of irradiation was found to be 75% while heteroatoms (P, S, N) were mineralized into phosphate, sulfate and nitrate ions, respectively. A microtox test was performed to evaluate the toxicity of solutions treated by catalysts. Illumination of diazinon in the presence of TiO₂ gave rise to several intermediates that have been identified by means of solid phase extraction and gas chromatography-mass spectrometry, while a simple degradation pathway is proposed.     

Efficient photocatalytic degradation of Rhodamine B dye using ZnO/graphitic C<Subscript>3</Subscript>N<Subscript>4</Subscript> nanocomposites synthesized by microwave

Semiconductor photocatalysis is a solution to issues of environmental pollution and energy shortage because photocatalysis can use solar energy to degrade pollutants. The photocatalytic activity can be improved by using composites of ZnO and other semiconductors. Here, composites of ZnO and polymeric graphite-like C₃N₄ (g-C₃N₄) with high photocatalytic activities were prepared by microwave synthesis. Products were characterized by X-ray diffraction, transmission electron microscopy, ultraviolet–visible and Fourier transform infrared spectroscopy. The photocatalytic degradation of Rhodamine B was tested under irradiation from a Xe lamp. Results show that adding graphite-like C₃N₄ promotes the photocatalytic activity of ZnO. Composites with 1.0 wt% g-C₃N₄ showed the best photodegradation efficiency, and the reaction average energy was approximately 33.71 kJ mol^?1.     

Sulfamethoxazole removal from polluted water by immobilized photocatalysis

The photocatalytic activity of TiO₂ deposits (Degussa P25 and Millennium PC500) has been studied using sulfamethoxazole (SMX) as a model water pollutant and a UV fluorescent lamp as a light source (365 nm). Both catalysts have shown very similar properties in the photocatalytic degradation of SMX. Special attention has been given to the effect of the irradiation time, pH, and pollutant concentration. No mass-transfer limitations are observed. The degradation of SMX is accelerated at low concentration, and the photocatalytic degradation kinetics obey the Langmuir–Hinshelwood model, allowing the adsorption and apparent rate constants to be determined for both catalysts.     

Visible light-assisted photocatalytic oxidation of organic pollutants using nitrogen-doped titania

An experimental research into the aqueous photocatalytic oxidation (PCO) of organic groundwater pollutants, methyl-tert-butyl ether (MTBE), tert-butyl alcohol, phenol, humic substances, 2-ethoxy ethanol and ethylene glycol was undertaken using visible light-sensitive nitrogen-doped titanium dioxide photocatalysts. Nitrogen-doped titania proved to be an effective photocatalyst for MTBE with its action comparable to and even surpassing that of Degussa P25. In contrast, with the other substances the photocatalysts showed negligible activity. This difference was explained by the poor adsorption properties of N-doped catalysts. The predominance of different PCO mechanisms dependent of the surface properties of N-TiO₂ catalysts was elucidated.     

Photocatalytic degradation of methyl orange using ZnO/TiO2 composites

ZnO/TiO₂ composites were synthesized by using the solvothermal method and ultrasonic precipitation followed by heat treatment in order to investigate their photocatalytic degradation of methyl orange (MO) in aqueous suspension under UV irradiation. The composition and surface structure of the catalyst were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and transmission electron microscopy (TEM). The degradation efficiencies of MO at various pH values were obtained. The highest degradation efficiencies were obtained before 30 min and after 60 min at pH 11.0 and pH 2.0, respectively. A sample analysis was conducted using liquid chromatography coupled with electrospray ionization ion-trap mass spectrometry. Six intermediates were found during the photocatalytic degradation process of quinonoid MO. The degradation pathway of quinonoid MO was also proposed.     

Removal of toluene from air streams by cobalt-copper bimetallic catalysts supported on sepiolite

Abstract

Oxidative removal of toluene using copper and cobalt bimetallic catalysts with varying molar ratios supported on sepiolite was investigated. The catalysts prepared by a deposition precipitation method and were characterized using X-ray diffraction, nitrogen adsorption-desorption, field emission scanning electron microscopy, H₂-temperature-programmed reduction, transmission electron microscope, and inductive coupled plasma atomic emission spectroscopy. The species supported on sepiolite are Co₃O₄, CuO, and CuCo₂O₄. The activities of the tested catalysts increased in the order 0Co-4Cu/Sep <1Co-3Cu/Sep <4Co-0Cu/Sep <1Co-1Cu/Sep <3Co-1Cu/Sep. The latter exhibiting 90% toluene oxidative degradation at 288?°C within 15?h, having high selectivity towards CO₂, and being stable at 300?°C up to 15?h. In conclusion, this study showed that sepiolite has excellent properties as a support.     

Synthesis, physicochemical characterizations and catalytic performance of Pd/carbon-zeolite and Pd/carbon-CeO2 nanocatalysts used for total oxidation of xylene at low temperatures

In this work, xylene removal from waste gas streams was investigated via catalytic oxidation over Pd/carbon-zeolite and Pd/carbon-CeO₂ nanocatalysts. Activated carbon was obtained from pine cone chemically activated using ZnCl₂ and modified by H₃PO₄. Natural zeolite of clinoptilolite was modified by acid treatment with HCl, while nano-ceria was synthesized via redox method. Mixed supports of carbon-zeolite and carbonceria were prepared and palladium was dispersed over them via impregnation method. The prepared samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller surface area (BET), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric (TG) techniques. Characterization of nanocatalysts revealed a good morphology with an average particle size in a nano range, and confirmed the formation of nano-ceria with an average crystallite size below 60 nm. BET analysis indicated a considerable surface area for catalysts (～1000 m²·g^?1). FTIR patterns demonstrated that the surface groups of synthesized catalysts are in good agreement with the patterns of materials applied in catalyst synthesis. The performance of catalysts was assessed in a low-pressure catalytic oxidation pilot in the temperature range of 100° C-250°C. According to the reaction data, the synthesized catalysts have been shown to be so advantageous in the removal of volatile organic compounds (VOCs), representing high catalytic performance of 98% for the abatement of xylene at 250°C. Furthermore, a reaction network is proposed for catalytic oxidation of xylene over nanocatalysts.     

One-pot hydrothermal fabrication of BiVO4/Fe3O4/rGO composite photocatalyst for the simulated solar light-driven degradation of Rhodamine B

• BiVO₄/Fe₃O₄/rGO has excellent photocatalytic activity under solar light radiation. • It can be easily separated and collected from water in an external magnetic field. • BiVO₄/Fe₃O₄/0.5% rGO exhibited the highest RhB removal efficiency of over 99%. • Hole (h⁺) and superoxide radical (O₂^•−) dominate RhB photo-decomposition process. • The reusability of this composite was confirmed by five successive recycling runs. Fabrication of easily recyclable photocatalyst with excellent photocatalytic activity for degradation of organic pollutants in wastewater is highly desirable for practical application. In this study, a novel ternary magnetic photocatalyst BiVO₄/Fe₃O₄/reduced graphene oxide (BiVO₄/Fe₃O₄/rGO) was synthesized via a facile hydrothermal strategy. The BiVO₄/Fe₃O₄ with 0.5 wt% of rGO (BiVO₄/Fe₃O₄/0.5% rGO) exhibited superior activity, degrading greater than 99% Rhodamine B (RhB) after 120 min solar light radiation. The surface morphology and chemical composition of BiVO₄/Fe₃O₄/rGO were studied by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, UV–visible diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy. The free radicals scavenging experiments demonstrated that hole (h⁺) and superoxide radical (O₂^•−) were the dominant species for RhB degradation over BiVO₄/Fe₃O₄/rGO under solar light. The reusability of this composite catalyst was also investigated after five successive runs under an external magnetic field. The BiVO₄/Fe₃O₄/rGO composite was easily separated, and the recycled catalyst retained high photocatalytic activity. This study demonstrates that catalyst BiVO₄/Fe₃O₄/rGO possessed high dye removal efficiency in water treatment with excellent recyclability from water after use. The current study provides a possibility for more practical and sustainable photocatalytic process.     

Enhancement of photocatalytic performance in sonochemical synthesized ZnO–rGO nanocomposites owing to effective interfacial interaction

Nanocomposites composed of two or more components with desirable performance have attracted tremendous attention, mainly due to the synergic effect between the components. The effective combination of ZnO and reduced graphene oxide would lead to ameliorate the photocatalytic performance. To enhance applicability of semiconductor photocatalytic, the composites used should be good interfacial contact governed by suitable particle size distribution. Herein we aim to fabricate the different crystallize size of ZnO nanoparticles (NPs) in ZnO–reduced graphene oxide (ZnO–rGO) nanocomposites by sonochemical synthesis and subsequent facile drying treatment method. The Zn precursor, Zn(Ac)₂, with a plenty of functional groups, was used as a starting source for both reduction of graphene oxide and formation of ZnO on rGO sheets through chemical bonds without the addition of hazardous reducing agents. LiOH was chosen as an assistive reagent to enhance the complete reaction between Zn(Ac)₂ and GO in the formation of ZnO–rGO nanocomposites. More remarkably, drying condition has the great influence on the crystallize size of ZnO NPs in as-prepared ZnO–rGO nanocomposites. It is found that ZnO–rGO nanocomposites dried at ?50 °C (freeze drying) show the highest photocatalytic efficiency in the degradation of rhodamine B (RhB) as compared to ZnO–rGO nanocomposites by other drying conditions under visible-light irradiation. Correlating the crystallize size obtained by different drying temperatures with the photocatalytic activity, it is probed that the smaller crystallize size in ZnO–rGO nanocomposites enhances the interfacial contact and a chemical bonding between rGO and ZnO NPs leading to the effective separation of electrons and holes. In addition, the O ₂ ^·? anion was determined to be the main active oxidant by free radicals trapping experiment and a photodegradation mechanism of ZnO–rGO nanocomposites over rhodamine B (RhB) was proposed based on our observations.     

Photocatalytic formation of hydrogen peroxide over highly porous illuminated ZnO and TiO2thin film

The photocatalytic formation of hydrogen peroxide over ZnO and TiO₂thin films has been investigated in aqueous phase in the presence of molecular oxygen as an electron acceptor. These films are highly porous and showed enhanced catalytic activity in the photochemical formation of hydrogen peroxide. The amount of H₂O₂formed during 2 hour light illumination is 4–6 μM and the rates of formation of hydrogen peroxide of both the films are almost comparable. The yield of hydrogen peroxide increases with the increase in irradiation time and a trend of steady state concentration of H₂O₂is observed in the case of TiO₂thin film. Photodissolution of ZnO particles is observed in some extent during the process of prolonged UV light illumination.     

Construction of carbon nanotube-based microcapsules by self-assembly

Carbon nanotubes possess unique structures and outstanding properties. However, dispersion and manipulation of carbon nanotubes in solvents severely limit their application. A solution is building carbon nanotube-based microcapsules that combine both the properties of carbon nanotubes and capsules. Carbon nanotube-based microcapsules have indeed great potential applications including catalysts, adsorbents, and controlled-release materials. Here, we built carbon nanotube-based microcapsules by electrostatic self-assembly to develop novel composite materials. The construction and morphology of microcapsules were characterized by Raman spectroscopy, infrared spectroscopy, scanning electron microscopy and transmission electron microscopy. Pre-films composed of poly(sodium 4-styrenesulfonate) and poly(diallyldimethylammoinum chloride) were assembled onto calcium carbonate (CaCO₃) microparticles to construct positive solid templates. The carboxylated carbon nanotubes were then successfully assembled on the CaCO₃ template using a self-assembly technique. Ethylene diamine tetraacetic acid (EDTA) was used as a powerful chelating agent to remove the CaCO₃ cores by chelation between EDTA and calcium, thus completing the construction of carbon nanotube-based hollow microcapsules. The spherical shapes of the microcapsules were well retained, and the carbon nanotubes were anchored evenly in the polyelectrolyte layers.     

EDS analysis of Portland ash cement degradation in an aggressive environment

The behaviour of Portland cement with and without 30% fly ash addition in aggressive solutions was studied. This paper considers the sulphate corrosion of the hardened cement paste. The cement paste test samples were prepared, cured in water for 21 day and then exposed to the influence of aggressive environment (10% (NH₄SO₄ solution). The measurements of several properties were carried out and the results were analyzed.

The image of the surface composition and morphology of the cement paste test samples was made by scanning electron microscopy (SEM). Concentration gradient of sulphate ions in cement paste depth was obtained by energy‐dispersive analysis (EDS).     

Preparation and characterization of a new TiO2/SiO2 composite catalyst for photocatalytic degradation of indigo carmin

The TiO₂/SiO₂ composite was prepared by means of the SiO₂-particle-entrapment method. The FTIR data showed the presence of Si–O–Ti stretching vibration band at 970 cm⁻¹ in the TiO₂/SiO₂ composite, suggesting a reaction between TiO₂ and silica on the TiO₂ particle surface during the silicagel formation around the TiO₂ particles. The photocatalytic efficiency of TiO₂ immobilized in silicagel was compared with that of the conventional TiO₂ Degussa P25 catalyst. For this purpose, the degradation of indigo carmin (IC) dye was used as model molecule in the tests. The effect of operational parameters such as catalyst loading and dye concentration on the photocatalytic degradation of the model dye was investigated. The rate of degradation increased with increasing catalyst loading, and when the concentration of the dye decreases.     

Photodegradation of an azo dye by silver-doped nano-particulate titanium dioxide

The synthesis of silver doped nano-particulate titanium dioxide (Ag/TiO₂) using a microemulsion method and an investigation of its photocatalytic activity for the degradation of Acid Red 27 in distilled water under UV-irradiation is reported. The prepared Ag/TiO₂ is characterized using transmission electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy. The size of the Ag nanoparticles is around 5–15?nm, with almost uniform distribution on the TiO₂ particles. The efficiency of the photocatalytic process is evaluated to establish the optimum conditions, found to be at 2?wt% of Ag loading on TiO₂, catalyst dosage of 400?mg?L^?1, and calcination temperature of 300°C. Complete decolorization of the dye solution on Ag/TiO₂ was observed in 20?min of UV irradiation in the optimum conditions.     

Novel synthetic approaches and TWC catalytic performance of flower-like Pt/CeO2

A novel Ultrasonic Assisted Membrane Reduction （UAMR）-hydrothermal method was used to prepare flower-like Pt/CeO2 catalysts. The texture, physical/chemical properties, and reducibility of the flower-like Pt/CeO2 catalysts were characterized by X-Ray Diffraction （XRD）, Scanning Electron Microscope （SEM）, Transmission Electron Microscope （TEM）, N2 adsorption, and hydrogen temperature programmed reduction （HE-TPR） techniques. The catalytic performance of the catalysts for treating automobile emission was studied relative to samples prepared by the conventional wetness impregnation method. The Pt/CeO2 catalysts fabricated by this novel method showed high specific surface area and metal dispersion, excellent three-way catalytic activity, and good thermal stability. The strong interaction between the Pt nanoparticles and CeO2 improved the thermal stability. The Ce4＋ ions were incorporated into the surfactant chains and the Pt nanoparticles were stabilized through an exchange reaction of the surface hydroxyl groups. The SEM results demonstrated that the Pt/CeO2 catalysts had a typical three-dimensional （3D） hierarchical porous struc- ture, which was favorable for surface reaction and enhanced the exposure degree of the Pt nanoparticles. In brief, the flower-like Pt/CeO2 catalysts prepared by UAMR-hydrothermal method exhibited a higher Pt metal dispersion, smaller particle size, better three-way catalytic activity, and improved thermal stability versus conven- tional materials.