Kinetics of microwave-enhanced oxidation of phenol by hydrogen peroxide

Aqueous solutions of phenol were oxidized by hydrogen peroxide assisted by microwave (MW) irradiation. A simple kinetic model for the overall degradation of phenol in the presence of excess H₂O₂ is proposed in which the degradation rate of phenol is expressed as a linear function of the concentrations of phenol and H₂O₂. A detailed parametric study showed that the degradation rate of phenol increased with increasing [H₂O₂] until saturation was observed. Phenol degradation followed apparent zero-order kinetics under MW radiation or H₂O₂ oxidation. However, after 90 min of irradiation, the observed kinetics shifted to pseudo first order. The overall reaction rates were significantly enhanced in the combined MW/H₂O₂ system, mainly because microwave could accelerate H₂O₂ to generate hydroxyl radical (??OH) and other reactive oxygen intermediates. The observed synergetic effects of the MW/H₂O₂ process resulted in an increased in the net reaction rate by a factor of 5.75. When hydrogen peroxide is present in a large stoichiometric excess, the time required to achieve complete mineralization is reduced significantly.     

Removal of organophosphorus pesticides from water by electrogenerated Fenton's reagent

Aqueous solutions of organophosphorus pesticides were completely mineralized via in-situ generated hydroxyl radicals (HO^·) by the Electro-Fenton process. Formation of Fenton's reagent (H₂O₂, Fe²⁺) was carried out by simultaneous reduction of O₂ and Fe³⁺ on carbon cathode in acidic medium. The electrochemistry combined with Fenton's reagent provides an excellent way to continuously produce the hydroxyl radical, a powerful oxidant. We demonstrate the efficiency of the Electro-Fenton process to degrade three organophosphorus insecticides: malathion, parathion ethyl and tetra-ethyl-pyrophosphate (TEPP). Degradation kinetics and removals of chemical oxygen demand (COD) have been investigated. Here we show that the mineralization efficiency was over 80% for three organophosphorus pesticides.     

Photocatalytic degradation of chlorophenols using Ru(bpy) 3 2+ /S2O 8 2−

Advanced oxidation processes, such as photocatalysed oxidation, provide an important route for degradation of wastes. In this study, the lowest excited state (³MLCT) of Ru(bpy)₃²⁺ is used to break down chlorophenol pollutant molecules to harmless products. This has the advantage of using visible light and a short-lived catalytically active species. Photolysis of deaerated aqueous solutions of a variety of mono- and poly-substituted chlorophenols has been followed in the presence of Ru(bpy)₃²⁺/S₂O₈²⁻ with near visible light (λ > 350 nm) by UV/visible absorption spectroscopy, luminescence, potentiometry, NMR and HPLC techniques. Upon irradiation, a decrease is observed in the chlorophenol concentration, accompanied by the formation of Cl⁻, H⁺ and SO₄²⁻ ions as the main inorganic products. Benzoquinone, phenol, dihydroxybenzenes and chlorinated compounds were the dominant organic products. As the ruthenium(II) complex is regenerated in the reaction, the scheme corresponds to an overall catalytic process. The kinetics of the rapid chlorophenol photodechlorination has been studied, and are described quite well by pseudo-first order behaviour. Further studies on this were made by following Cl⁻ release with respect to the initial Ru(bpy)₃²⁺ and S₂O₈²⁻ concentrations. A comparison is presented of the photodechlorination reactivity of the mono and polychlorophenols studied at acidic and alkaline pH.     

Iron-doped copper 1,4-benzenedicarboxylate as photo-Fenton catalyst for degradation of methylene blue

Abstract

A metal-organic framework of iron-doped copper 1,4-benzenedicarboxylate was synthesized and, for the first time, utilized as a heterogeneous photo-Fenton catalyst for degradation of methylene blue dye in aqueous solution under visible light irradiation. The synthesized materials were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and energy-dispersive X-ray spectroscopy. The influence factors, kinetics, and stability of the synthesized catalysts were investigated in detail. Iron-doped copper 1,4-benzenedicarboxylate showed higher degradation efficiency than pure copper 1,4-benzenedicarboxylate. An almost complete degradation was achieved within 70?min under visible light irradiation at a solution pH of 6, a catalyst loading of 1?g?L^?1, a H₂O₂ dosage of 0.05?mol L^?1 and methylene blue concentration of 50?mg?L^?1. Recycling studies demonstrated that the iron-doped copper 1,4-benzenedicarboxylate is a promising heterogeneous photo-Fenton catalyst for long-term removal of methylene blue dye from industrial wastewater.     

Decomposition of perfluorooctanoic acid by microwaveactivated persulfate: Effects of temperature, pH, and chloride ions

Microwave-hydrothermal treatment of persistent and bioaccumulative perfluorooctanoic acid (PFOA) in water with persulfate (S₂O ₈ ^2? ) has been found effective. However, applications of this process to effectively remediate PFOA pollution require a better understanding on free-radical scavenging reactions that also take place. The objectives of this study were to investigate the effects of pH (pH = 2.5, 6.6, 8.8, and 10.5), chloride concentrations (0.01?C0.15 mol·L^?1), and temperature (60°C, 90°C, and 130°C) on persulfate oxidation of PFOA under microwave irradiation. Maximum PFOA degradation occurred at pH 2.5, while little or no degradation at pH 10.5. Lowering system pH resulted in an increase in PFOA degradation rate. Both high pH and chloride concentrations would result in more scavenging of sulfate free radicals and slow down PFOA degradation. When chloride concentrations were less than 0.04 mol·L^?1 at 90°C and 0.06 mol·L^?1 at 60°C, presence of chloride ions had insignificant impacts on PFOA degradation. However, beyond these concentration levels, PFOA degradation rates reduced significantly with an increase in chloride concentrations, especially under the higher temperature.     

A convenient and eco-friendly way to synthesize Pt(II) and Pd(II) porphyrins in ionic liquids by microwave activation

Due to the slow rate of incorporation of inert-metal ions into free-base porphyrins compared to other transition metals, several methods have been proposed to accelerate the rate of metalation. However, these methods have disadvantages such as low yields, difficulties of purification of final products, and environmental effects. To avoid those disadvantages, we reacted Pt(II) and Pd(II) salts with H₂(TPP), H₂(TMPyP)⁴⁺, and their β-pyrrole derivatives, H₂(Br₈TPP) and H₂(Br₈TMPyP)⁴⁺, in 1-butyl-3-methylimidazolium bromide ([bmim]⁺Br⁻) under microwave irradiation. The combination of microwave heating and ionic liquids provides efficient thermal energy transfer among the porphyrins and metal salts. In addition, ionic liquids stabilize charged species as well as their intermediates, due to their high dipole moment and high boiling point. This not only shortens the reaction time but also gives high yields of products at relatively low temperatures, of about 100°C compared to conventional synthesis methods: 150°C for DMF, 190°C for DMSO. Here, we demonstrate that Pt(II)/Pt(II) metalloporphyrins are synthesized at high rates, e.g. 6–30 min for 100% metalation, with high yields of 79–93% in [bmim]⁺Br⁻ by microwave activation.     

Sonocatalytic degradation of tetracycline antibiotic in aqueous solution by sonocatalysis

Tetracycline (TC), one of the most common antibiotics, is often poorly bio-degraded in conventional wastewater treatment plants. In this study, the sonocatalytic degradation of TC was investigated using TiO₂ nano-particles as catalyst. The effect of pH, initial TC concentrations, reaction times, and H₂O₂ concentrations were evaluated. The efficacy of ultrasonic irradiation alone in the removal of this pollutant was negligible but removal efficiency increased upon addition of TiO₂ up to 250 mg L^?1; increase of pH and initial TC concentration attenuated TC degradation. Addition of H₂O₂ raised the removal efficiency so that complete removal of TC was achieved within 75 min.     

Degradation of azo dyes in water by Electro-Fenton process

The degradation of the azo dyes azobenzene, p-methyl red and methyl orange in aqueous solution at room temperature has been studied by an advanced electrochemical oxidation process (AEOPs) under potential-controlled electrolysis conditions, using a Pt anode and a carbon felt cathode. The electrochemical production of Fenton's reagent (H₂O₂, Fe²⁺) allows a controlled in situ generation of hydroxyl radicals (^·OH) by simultaneous reduction of dioxygen and ferrous ions on the carbon felt electrode. In turn, hydroxyl radicals react with azo dyes, thus leading to their mineralization into CO₂ and H₂O. The chemical composition of the azo dyes and their degradation products during electrolysis were monitored by high performance liquid chromatography (HPLC). The following degradation products were identified: hydroquinone, 1,4-benzoquinone, pyrocatechol, 4-nitrocatechol, 1,3,5-trihydroxynitrobenzene and p-nitrophenol. Degradation of the initial azo dyes was assessed by the measurement of the chemical oxygen demand (COD). Kinetic analysis of these data showed a pseudo-first order degradation reaction for all azo dyes. A pathway of degradation of azo dyes is proposed. Specifically, the degradation of dyes and intermediates proceeds by oxidation of azo bonds and aromatic ring by hydroxyl radicals. The results display the efficiency of the Electro-Fenton process to degrade organic matter. Electronic Publication     

Coupled electrocoagulation–electro-Fenton for efficient domestic wastewater treatment

This article reports the first use of coupled electrocoagulation and electro-Fenton (EF-EC) to clean domestic wastewater. Domestic wastewater contains high amounts of organic, inorganic and microbial pollutants that cannot be usually treated in a single step. Here, to produce an effluent suitable for discharge in a single process step, a hybrid process combining electrocoagulation and electro-Fenton was simultaneously used to decrease chemical oxygen demand (COD), turbidity and total suspended solids (TSS) from domestic wastewater. The electrocoagulation–electro-Fenton process was firstly tested for the production of H₂O₂ using Ti–IrO₂ and vitreous carbon- or graphite electrodes arranged at the anode and the cathode, respectively. The concentration of H₂O₂ recorded at 1.5 A of current intensity during 60 min of electrolysis using vitreous carbon- and graphite electrodes at the cathode was 4.18 and 1.62 mg L^?1, respectively. By comparison, when the iron electrode was used at the anode, 2.05 and 1.06 mg L^?1 of H₂O₂ were recorded using vitreous carbon and graphite, respectively. The H₂O₂ concentration decrease was attributed to hydroxyl radical formation generated by the Fenton reaction. Electro-Fenton using iron electrode at the anode and vitreous carbon at the cathode with a current density imposed of 0.34 A dm^?2 ensures the removal efficiency of 50.1 % COD_T, 70.8 % TSS and 90.4 % turbidity. The electrocoagulation–electro-Fenton technique is therefore a promising secondary treatment to simultaneously remove organic, inorganic and microbial pollutants from domestic, municipal and industrial wastewaters.     

Removal of carbamazepine from urban wastewater by sulfate radical oxidation

The occurrence of bioactive trace pollutants such as pharmaceuticals in natural waters is an emerging issue. Numerous pharmaceuticals are not completely removed in conventional wastewater treatment plants. Advanced oxidation processes may represent an interesting alternative to completely mineralize organic trace pollutants. In this article, we show that sulfate radicals generated from peroxymonosulfate/Co^II are more efficient than hydroxyl radicals generated from the Fenton’s reagent (H₂O₂/Fe^II) for the degradation of the pharmaceutical compound, carbamazepine. The second-order rate constant for the reaction of SO₄ ^·− with carbamazepine is 1.92·10⁹ M⁻¹ s⁻¹. In laboratory grade water and in real urban wastewater, SO₄ ^·− yielded a faster degradation of carbamazepine compared to HO^· . Under strongly oxidizing conditions, a nearly complete mineralization of carbamazepine was achieved, while under mildly oxidizing conditions, several intermediates were identified by LC–MS. These results show for the first time in real urban wastewater that sulfate radicals are more selective than hydroxyl radicals for the oxidation of an organic pollutant and may represent an interesting alternative in advanced oxidation processes.