镁盐改性石英砂的制备及其吸附Zn^2＋影响因素

通过改变石英砂表面的物理化学性质,提高滤料的吸附效率,并考察其对废水中Zn2＋的去除效果。以石英砂为载体,用碱性沉积法制备了镁盐改性砂,测定了镁盐改性砂的比表面积,考察了镁盐改性砂对锌的吸附性能及其影响因素。结果表明,镁盐改性砂的比表面积为1.475 m2/g,比石英原砂比表面积提高了6.12倍;在pH值为中性的条件下...     

氮改性对生物炭理化性质的影响及其对废水中铜离子的吸附特性

原状生物炭对废水中污染物的去除效果有限,改性是提高其吸附能力的重要途径.本文以水稻秸秆为对象,尿素为改性剂,在700℃无氧热解条件下分别制备了原状秸秆生物炭（RSBC）和氮改性秸秆生物炭（N-RSBC）,采用扫描电子显微镜（SEM）、比表面积分析仪（BET）、元素分析仪（EA）、Zeta电位、X射线衍射（XRD）、傅里叶红外光谱（FTIR）以及X射线光电子能谱（XPS）对RSBC和N-RSBC的形貌、比表面积、元素组成、矿物类型和官能团进行表征,考察溶液初始pH值、离子类型和离子强度对生物炭吸附Cu²⁺的影响,并结合吸附等温线和吸附动力学实验、吸附后表征结果探究生物炭对废水中Cu²⁺的吸附性能和机理.结果表明,氮改性导致了生物炭的比表面积和孔体积的降低,而生物炭的官能团类型却更加丰富,特别是含氮官能团.当溶液初始pH值从2.0增加到6.0,生物炭对于Cu²⁺的去除率逐渐增加.对RSBC而言,Na⁺、K⁺、Ca²⁺、Mg2+的存在能略微增加其对Cu^...     

两种盐复合改性活性氧化铝对水中氟的吸附特性

采用Fe2(SO4)3和Al2(SO4)3两种盐对活性氧化铝进行改性,通过静态吸附实验,研究了改性活性氧化铝对水中氟离子的吸附特性及影响因素.改性后的活性氧化铝吸附容量显著提高,25℃下吸附容量达到6.25 mg·g-1.改性活性氧化铝对氟的吸附动力学符合拟二级动力学模型,吸附等温线更符合Langmuir等温吸附规律.吸附过程ΔG0<0、ΔH0>0、ΔS0>0,表明改性吸附剂对氟的吸附是自发的,是吸热、熵增加的反应.吸附最佳p H值为6,吸附过程中,共存PO3-4对吸附效果影响最大.     

PDMDAAC-膨润土对对硝基苯酚吸附特性的研究

以聚二甲基二烯丙基氯化铵(PDMDAAC)为改性剂,对天然钙基膨润土进行有机改性,比较PDMDAAC-膨润土与膨润土对对硝基苯酚废水的处理性能,研究了改性剂用量以及对硝基苯酚浓度、pH值、反应时间等因素对膨润土吸附去除率的影响．结果表明：PDMDAAC改性膨润土对对硝基苯酚的吸附效果比膨润土有较大提高,吸附去除率达84％;吸附后的PDMDAAC-膨润土可用酸进行再生,再生后对对硝基苯酚的吸附去除率没有明显下降;PDMDAAC-膨润土对对硝基苯酚的吸附行为可用Freundlieh型吸附等温线较好地进行拟合．     

聚二甲基二烯丙基氯化铵改性高炉渣的制备及其应用

用聚二甲基二烯丙基氯化铵(PDMDAAC)改性高炉渣以提高其对印染废水的处理能力.研究了改性过程中改性剂浓度、温度和制备时间对改性效果的影响,对模拟印染废水和实际印染废水进行了处理,表明PDMDAAC改性大大提高了高炉渣对染料的吸附能力.     

改性硅藻土的制备、表征及其在富营养化水体除磷中的应用

利用吉林原土和FeCl3作为主要原料,制备应用于抑制湖泊富营养化的除磷材料—改性硅藻土,并利用物理吸附仪、扫描电镜、射线粉末衍射仪（XRD）等对改性硅藻土进行表征,此外,探讨了吸附时间、pH以及温度等对改性硅藻土除磷性能的影响。结果显示：（1）经改性后,硅藻土中Fe元素的含量有所增加,杂质含量则有所降低;微孔明显增多,孔径增大,表面负载一定量的颗粒物,粗糙度增大,比表面积较原硅藻土增大6倍。（2）在水体除磷应用中,当吸附时间达到20min时,吸附趋向平衡;在酸性条件下改性硅藻土的除磷效果好于碱性条件下的除磷效果;在25℃下改性硅藻土对磷的吸附能力较其他温度下强;（3）Langmuir和Freundlich等温吸附方程都能较好地描述硅藻土对磷的等温吸附特征,用Freundlich吸附等温方程来描述改性硅藻土对水中磷的吸附更为准确。     

壳聚糖改性膨润土处理焦化废水的实验研究

焦化废水是煤制焦炭、煤气净化及焦化产品回收过程中产生的废水,其成分复杂多变,属于难处理的工业废水。利用壳聚糖对膨润土进行改性,制备了壳聚糖改性膨润土,并应用于焦化废水的处理,并对影响处理效果的工艺参数进行了优化,结果表明：在pH=8.6,投加量为10g·mL-1,搅拌时间为30min,离心时间为12min条件下,改性膨润土对焦化废水CODcr的去除率达到82.5%以上,处理效果明显优于原土和壳聚糖。此外,通过对原土和壳聚糖改性膨润土进行的比表面积和扫描电镜等表征测定分析可知,壳聚糖的加入并没有改变膨润土的基本框架,只是增大了膨润土的比表面积,从而提高吸附性能。     

高锰酸钾改性活性炭的制备、表征及其吸附Pb2＋的特性

为提高活性炭对废水中Pb2＋的去除效率,采用不同浓度的KMnO4溶液对颗粒活性炭进行静置氧化/冷凝回流改性;利用BET测定了改性活性炭比表面积,并采用BET、SEM、FTIR和XRD等方法对其进行了表征;考察了吸附时间、投加量、pH值、温度对吸附Pb2＋的影响。结果表明,Pb2＋浓度为40 mg/L,在3 g/L的投加量下,0.01KMnO4-GAC和0.03KMnO4-GAC对Pb2＋的吸附去除率分别达到了92%和94%,是GAC对Pb2＋吸附去除率的1.84和1.88倍;在吸附剂3 g/L的投加量下,180 min基本达到吸附平衡;3种吸附剂对Pb2＋的吸附,随着pH值的降低而减少;而温度对吸附Pb2＋的影响相对较小。     

改性污泥活性炭对苯乙烯的吸附

以城市污泥为原料制备活性炭,对其进行改性,研究了改性前后的比表面积、表面酸碱基团、对苯乙烯的静态吸附容量、吸附穿透曲线、脱附活化能等吸附性能.结果表明,硫酸铜溶液浸渍改性后可使污泥活性炭比表面积明显提高,其中0.1 mol.L-1硫酸铜溶液浸渍改性的污泥活性炭较改性前的比表面积提高了32%(达704.7 m.2g-1).硫酸铝溶液和硫酸铜溶液浸渍改性可以使污泥活性炭表面酸性基团含量提高、表面碱性基团含量减少;对苯乙烯的静态吸附容量提高到改性前的两倍以上(分别达211.4 mg.g-1和178.8 mg.g-1)、对苯乙烯的动态吸附穿透时间由2 min提高到10 min以上、脱附活化能由2.94 kJ.mol-1提高到6 kJ.mol-1以上.改性后活性污泥炭的吸附性能得到明显提高.     

FeCl3改性火山石的磷吸附特征及其生物膜对底泥的氮磷控制作用

低碳背景下,既具备高效磷吸附能力、又能固定化脱氮微生物菌群的环保材料在缓流水体富营养化治理中具有良好的应用前景.以火山石为原料,筛选预处理方法,比较分析氯化铁改性、煅烧改性、复合改性后的磷吸附效果;采用SEM、BET、XRD、FTIR表征技术,结合等温吸附曲线和吸附动力学曲线,探索FeCl₃改性火山石的磷吸附机制;通过底泥培养试验,评价FeCl₃改性火山石生物膜对底泥氮磷释放的控制效果.结果表明5%HCl预处理可提高火山石的总磷(TP)吸附率30%左右,FeCl₃改性和FeCl₃联合焙烧改性可使火山石的TP吸附效率达到95%以上.FeCl₃改性后,火山石比表面积增加,微孔体积减小,平均吸附孔径增大.Fe2O3颗粒负载于火山石表面,—OH活性增加,生成的多羟基产物促进磷絮凝沉降,提高吸附效率. Langmuir和Freundlich方程拟合系数(R²)均大于0.9,最大吸附量为7.30 mg/g,表明FeCl₃改性火山石的磷吸附过程既存...     

活性污泥吸附预处理重油裂化制气废水

利用剩余活性污泥对含有高浓度芳香族化合物的重油裂化制气废水进行预处理的研究并提出了合适的吸附条件。结果表明，活性污泥吸附预处理对COD和悬浮物有明显的去除效果，而且可以提高废水BOD5／COD的比值，另外还有降解芳香族化合物的作用，使进入生物处理系统的废水的可生物降解性有明显的改善。这一方法为利用普通废水生物处理系统中产生的剩余活性污泥来预处理难降解的工业废水提供了一条有效的途径。     

固定化菌藻系统及对污水中氮磷营养盐的净化效果

利用海藻酸钙分别包埋固定小球藻、活性污泥及其两者混合物.研究固定态小球藻与悬浮态小球藻对污水中氮磷营养盐的处理效果,实验结果表明固定态藻对氮磷的去除效果明显优于悬浮态藻,其原因主要由于海藻酸钙凝胶对氮磷的吸附,系统pH值提高引起氨的气提及磷酸盐的沉淀作用.研究固定化藻、同定化活性污泥及共固定化菌藻分别对污水中氮磷营养盐的处理效果,在同等条件下,固定化菌藻对氮磷的去除效果优于固定化活性污泥和固定化藻类.这项研究显示菌藻共生在污水处理中具有较大的潜力.     

杭锦2~#土复合吸附剂对磷的吸附动力学

通过静态试验考察杭锦2#土/聚合硫酸铝复合吸附剂对生活污水中磷酸根的吸附特性,研究吸附过程的动力学模型,并从动力学角度探讨其吸附机理。结果表明,在杭锦2#土/聚合硫酸铝复合吸附剂用量5 g.L-1、吸附时间60 min、废水pH值6.0、温度25℃、磷初始质量浓度小于16.72 mg.L-1条件下,磷酸根的去除率在96%以上;复合吸附剂对磷酸根的吸附动力学特征符合假二级方程,吸附速率在前10 min为内扩散控制,后期由膜扩散和内扩散共同控制,且膜扩散占主导地位;磷酸根的初始浓度越高,吸附质粒子的表观内扩散系数和表观传质系数越小;使用不同再生次数的再生吸附剂（添加量为5 g.L-1）处理16.72 mg.L-1含磷生活污水,随着再生次数的增加,吸附能力有所下降,但磷酸根的去除率均大于89%。     

Highly efficient and selective removal of phosphate from wastewater of sea cucumber aquaculture for microalgae culture using a new adsorption-membrane separation-coordinated strategy

● A new adsorption-membrane separation strategy is used for phosphate removal. ● PVC/Zr-BT shows a selective adsorption ability to low-concentration phosphate. ● Low concentration of P below 0.05 mg/L was achieved in actual wastewater treatment. ● Algal biomass production served as a demonstration of phosphorus recycling. Enhanced phosphorus treatment and recovery has been continuously pursued due to the stringent wastewater discharge regulations and a phosphate supply shortage. Here, a new adsorption-membrane separation strategy was developed for rational reutilization of phosphate from sea cucumber aquaculture wastewater using a Zr-modified-bentonite filled polyvinyl chloride membrane. The as-obtained polyvinyl chloride/Zr-modified-bentonite membrane was highly permeability (940 L/(m²·h)), 1–2 times higher than those reported in other studies, and its adsorption capacity was high (20.6 mg/g) when the phosphate concentration in water was low (5 mg/L). It remained stable under various conditions, such as different pH, initial phosphate concentrations, and the presence of different ions after 24 h of adsorption in a cross-flow filtration system. The total phosphorus and phosphate removal rate reached 91.5% and 95.9%, respectively, after the membrane was used to treat sea cucumber aquaculture wastewater for 24 h and no other water quality parameters had been changed. After the purification process, the utilization of the membrane as a new source of phosphorus in the phosphorus-free f/2 medium experiments indicated the high cultivability of economic microalgae Phaeodactylum tricornutum FACHB-863 and 1.2 times more chlorophyll a was present than in f/2 medium. The biomass and lipid content of the microalgae in the two different media were similar. The innovative polyvinyl chloride/Zr-modified-bentonite membrane used for phosphorus removal and recovery is an important instrument to establish the groundwork for both the treatment of low concentration phosphate from wastewater as well as the reuse of enriched phosphorus in required fields.     

Removal of basic fuchsin dye from aqueous solutions using graphite oxide modified aromatic polyurethane foam material

Graphite oxide modified polyurethane foam (GO/PUF) was used for adsorption of basic fuchsin from aqueous solution and adsorption conditions were optimized to attain an efficiency of 99.5%. The adsorption isotherm was in agreement with the Langmuir model. Kinetic study followed pseudo-second order. Determination of Gibbs free energy and enthalpy change of adsorption indicated spontaneous and endothermic adsorption behavior, suggesting that the adsorbent had a potential for the removal of dyes from industrial wastewater.     

The adsorption of lead and copper from aqueous solution on modified peat-resin particles

Raw peat was modified with sulfuric acid, then mixed modified with resin to prepare the modified peat-resin particles. Using the batch experimental systems, the removal of heavy metals (copper and lead) on the modified peat-resin particles was investigated. The data of the adsorption isotherm could be fitted by the Langmuir equation well. The adsorption rate of heavy metals on modified peat-resin particles was very swift. The removal processes of heavy metals on modified peat-resin particles could be well described by pseudo-second order model. The adsorption rate of lead was affected by the initial heavy metal concentration, initial pH, particle size, agitation speed and particle mass. In the adsorption of heavy metals (lead and copper) on the modified peat-resin particles, ion exchange was the major reaction mechanism. Desorption data showed that the lead adsorbed by modified peat-resin particle could be desorbed by 0.5 N or 1.0 N HNO3. The desorption rate was swift. The experiments indicated that the modified peat-resin particles have great potential for the removal of heavy metals from wastewater.     

Sulfonated cross-linked polyethylenimine for selective removal of mercury from aqueous solutions

Polymeric materials are among the most promising, effective, and increasingly important adsorbents for the removal of toxic metals from wastewater. This study was dedicated to the development of an insoluble, modified chelating polymer for use as an adsorbent for abstraction of Hg from aqueous solutions. Cross-linked polyethylenimine (CPEI) was sulfonated by 3-chloropropanesulfonyl chloride for selective removal of Hg. The binding affinity of the sulfonated CPEI (SCPEI) to Hg was assessed as well as its ability to be regenerated for reuse. It exhibited high removal percentage for Hg up to 87% in synthetic solutions, with high selectivity even in the presence of competing ions: “Mn, Ni, Fe, Pb, Zn, and Cr.” The removal mechanism followed was observed to be adsorption and precipitation at pH 3 and 8, respectively. High adsorption capacities were also observed for wastewater to which the polymer was applied. The Freundlich isotherm was found to be the best fit describing the adsorption process of Hg onto the SCPEI. The pseudo second-order equation was found to better explain the adsorption kinetics, implying chemisorption. The thermodynamic study of the adsorption revealed high activation energies which confirmed the chemisorption as the mechanism of adsorption. The polymer exhibited up to 72% removal efficiency after regeneration, thus showing potential for re-use.     

Treatment of methylene blue-containing wastewater using microorganisms supported on granular activated carbon under packed column operation

We studied the feasibility of using biological granular activated carbon-packed column in treating methylene blue-containing wastewater. The granular activated carbon with immobilized microbes was packed into a column and fed with 3 liter methylene blue-containing wastewater daily. With initial 1350 mg/l of methylene blue and 1550 mg/l of chemical oxygen demand, it was observed that the colour and chemical oxygen demand removal efficiencies were 99 and 78%, respectively. The high treatment performance of the system could be due to the simultaneous adsorption and biodegradation processes and advantages of immobilized microbes compare to suspended cell system.     

Ammonia and phosphorus removal from agricultural runoff using cash crop waste-derived biochars

• Orange tree residuals biochar had a better ability to adsorb ammonia. • Modified tea tree residuals biochar had a stronger ability to remove phosphorus. • Partially-modified biochar could remove ammonia and phosphorus at the same time. • The real runoff experiment showed an ammonia nitrogen removal rate of about 80%. • The removal rate of total phosphorus in real runoff experiment was about 95%. Adsorption of biochars (BC) produced from cash crop residuals is an economical and practical technology for removing nutrients from agricultural runoff. In this study, BC made of orange tree trunks and tea tree twigs from the Laoguanhe Basin were produced and modified by aluminum chloride (Al-modified) and ferric sulfate solutions (Fe-modified) under various pyrolysis temperatures (200°C–600°C) and residence times (2–5 h). All produced and modified BC were further analyzed for their abilities to adsorb ammonia and phosphorus with initial concentrations of 10–40 mg/L and 4–12 mg/L, respectively. Fe-modified Tea Tree BC 2h/400°C showed the highest phosphorus adsorption capacity of 0.56 mg/g. Al-modified Orange Tree BC 3h/500°C showed the best performance for ammonia removal with an adsorption capacity of 1.72 mg/g. FTIR characterization showed that P = O bonds were formed after the adsorption of phosphorus by modified BC, N-H bonds were formed after ammonia adsorption. XPS analysis revealed that the key process of ammonia adsorption was the ion exchange between K⁺ and NH₄⁺. Phosphorus adsorption was related to oxidation and interaction between PO₄^3– and Fe³⁺. According to XRD results, ammonia was found in the form of potassium amide, while phosphorus was found in the form of iron hydrogen phosphates. The sorption isotherms showed that the Freundlich equation fits better for phosphorus adsorption, while the Langmuir equation fits better for ammonia adsorption. The simulated runoff infiltration experiment showed that 97.3% of ammonia was removed by Al-modified Orange tree BC 3h/500°C, and 92.9% of phosphorus was removed by Fe-modified Tea tree BC 2h/400°C.