Mercury volatilization by the most mercury-resistant bacteria from the seawater of Minamata Bay in various physiological conditions

The volatilization of mercuric chloride (HgCl₂) and methyl mercuric chloride (CH₃HgCl) by the 45 strains (35 Pseudoalteromonas sp., 2 Vibrio sp., 1 Aeromonas sp., and 7 unclassified) of the most mercury-resistant bacteria from Minamata Bay seawater was examined in various physiological conditions. The bacteria could grow and volatilize HgCl₂ in the liquid medium containing 1-10% NaCl. Two Pseudoalteromonas strains could grow and volatilize HgCl₂ at pH levels ranging from 5.0 to 10.0. The resting cells of 43 strains could volatilize HgCl₂ at concentrations ranging from 30 to 68% after 1-h incubation at 30vv°C. The resting cells of 41 strains could volatilize CH₃HgCl at concentrations ranging from 13 to 88% after 1-h incubation at 30vv°C. Ninety-two percent of mercury was removed from the phosphate buffer containing 0.1 7g/ml by a resting cell of Pseudoalteromonas strain H-4 after 30-min incubation at 30vv°C. We were able to screen the special bacteria, which could volatilize mercury compounds at a high rate in various physiological conditions, for the purpose of developing mercury removal methods using bacteria.     

Preparation of polymeric biosurfactant containing sugar and fatty acid esters

Vinyl sugar ester, 6-O-vinyladipoyl-d-glucose (VAG), was polymerized with vinyl fatty acid esters in dimethylformamide (DMF) with azobisisobutyronitrile (AIBN) to produce new amphiphilic polymers having branches of sugar and fatty acid esters. The influence of structural variations by changing the length of the alkyl chain of fatty acid moiety was examined by measurements of the surface tension and biodegradability.     

Differential leaching of nutrients from soluble vs. controlled-release fertilizers

Extremely sandy soils and poorly distributed high annual rainfall in the state of Florida contribute to significant leaching losses of nutrients from routine fertilization practices. A leaching column experiment was conducted to evaluate the leaching losses of nutrients when using currently available N, P, K blend fertilizers for young citrus tree fertilization. Fertilizer blends included NH₄NO₃, Ca(NO₃)₂, IBDU, IBDU plus Escote, Nutralene, Osmocote, and Meister. Following leaching of 1000 ml of water through soil columns, which simulates leaching conditions with 26 cm of rainfall, the amount of NO₃ and NH₄ recovered in the leachate from soil columns amended with an NH₄NO₃ blend accounted for 37% and 88% of the respective nutrients contained in the quantity of blend per column. The corresponding values for soil columns amended with a Ca(NO₃)₂ blend were 48% and 100%. Leraching losses of both NO₃ (<3%) and NH₄ (<4%) were drastically decreased when using controlled-release fertilizers. The recoveries of P and K in 1000 ml of leachate were 1.3% and 8%, respectively, of the nutrients added as Osmocote, which contained coated P and K sources. In the case of the rest of fertilizer blends, the recoveries of P and K in 1000 ml of leachate were as high as 52%–100% and 28%–100%, respectively. Therefore, controlled-release technology offers an important capability for minimizing leaching losses of nutrients.     

Photocatalytic degradation of para-hydroxybenzoic acid: Relationship between substrate adsorption and photocatalytic degradation

Dark adsorption and photocatalytic degradation of para-hydroxybenzoic acid (PHBA) was studied in the presence of Degussa P-25 titanium dioxide photocatalyst under concentrated solar radiation. This work includes the study of the effect of pH, and of the presence of different anions and cations on dark adsorption and photocatalytic degradation (PCD) of PHBA on titanium dioxide. The results obtained clearly indicate that there is a link between the extent of adsorption of PHBA and its PCD. Conditions that favor greater adsorption of PHBA also favor a greater PCD. This points to the possibility that the mechanism of PCD involves a surface reaction between adsorbed PHBA and OH ° radical. Anions were generally found to have a detrimental effect on the photocatalytic degradation of PHBA. Cl^- caused the greatest decrease in the PCD followed by NO₃^-, HCO₃^- and SO₄^2-. Cations Cu²⁺ and Fe²⁺ were not found to assist the degradation of PHBA, possibly due to the anions associated with them.     

Nitrate leaching beneath a containerized nursery crop receiving trickle or overhead irrigation

Container production of nursery crops is intensive and a potential source of nitrogen release to the environment. This study was conducted to determine if trickle irrigation could be used by container nursery producers as an alternative to standard overhead irrigation to reduce nitrogen release into the environment. The effect of overhead irrigation and trickle irrigation on leachate nitrate N concentration, flow-weighted nitrate N concentration, leachate volume, and plant growth was investigated using containerized rhododendron (Rhododendron catawbiense Michx. 'Album') supplied with a controlled-release fertilizer and grown outdoors on top of soil-monolith lysimeters. Leachate was collected over two growing seasons and overwinter periods, and natural precipitation was allowed as a component of the system. Precipitation accounted for 69% of the water entering the overhead-irrigated system and 80% of the water entering the trickle-irrigated system. Leachate from fertilized plants exceeded the USEPA limit of 10 mg L(-1) at several times and reached a maximum of 26 mg L(-1) with trickle irrigation. Average annual loss of nitrate N in leachate for fertilized treatments was 51.8 and 60.5 kg ha(-1) for the overhead and trickle treatments, respectively. Average annual flow-weighted concentration of nitrate N in leachate of fertilized plants was 7.2 mg L(-1) for overhead irrigation and 12.7 mg L(-1) for trickle irrigation. Trickle irrigation did not reduce the amount of nitrate N leached from nursery containers when compared with overhead irrigation because precipitation nullified the potential benefits of reduced leaching fractions and irrigation inputs provided under trickle irrigation.     

Verdant vehicles via viscoelasticity

The combustion of hydrocarbon (HC) fuels in internal combustion (IC) engines is modified by the presence of a few parts per million of megadalton molecular weight elastomers. The viscoelasticity imparted provides: reduced fuel vaporization, lesser back pressure, larger average droplet sizes, and lower combustion chamber temperatures. These effects result in: a reduction of emissions of HC, CO and NO_x of more than 70%, a substantial decrease in the number of particulates from diesel engines, a drop in combustion temperatures of more than 30vv°C, increases in engine power of more than 10%, an improved fuel octane rating, and economies of fuel consumption of more than 20%. The results are magnified during transitions, especially in the lower gears, used more often in urban traffic, where normal fuels emit more pollutants. These effects have a positive public health impact due to reductions in ozone, acid rain, particulates and partially oxidized HC.     

Optimizing Li2O-2B2O3 coating layer on LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode material for high-performance lithium-ion batteries

ABSTRACT

In this paper, a wet chemical method is used to coat LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) cathode material by Li₂O-2B₂O₃ (LBO) layer for Lithium-ion batteries (LIBs). For performance optimization, the effects of different contents (thicknesses) of LBO coating layers on NCM811 particle surface on the morphologies, structures, compositions, and electrochemical properties of the corresponding LIBs are studied using XRD, SEM, TEM, and electrochemical measurements. Coin LIBs are assembled with such coated NCM811 cathode materials for performance validation. Results show that LBO coating layer does not change the original lattice structure of the bulk material, it can only adhere to the surface of the bulk material. After coating, NCM811 shows a good crystallinity and the ordered layered structure. TEM images show that the thickness of LBO coating is increased with increasing LBO content, and that the appropriate LBO coating thickness and uniform coating state are conducive to the improvement of the electrochemical properties of NCM811 cathode materials. Particularly, NCM811 with LBO coating content of 1000 ppm shows the best performance compared to other coating contents. In this case, the coating thickness is relatively uniform, which is about 40～100 nm, giving a good first charge-discharge capacity of 214.1mAh/g, and a high Coulomb efficiency of 90.06%. After 50 cycles, the capacity retention rate of LIBs still keeps as high as 99.64%. Therefore, LBO coating can improve the performance of NCM811 and then the lithium-ion batteries.     

Nanosponges for water purification

We synthesized a new class of organic nanoporous polymers using cyclodextrins as basic building blocks. These processible nanoporous polymers were named 'nanosponges' because they have nanometer-size pores (distribution 0.7-1.2 nm) and exhibit superior ability to absorb organic molecules in water. Cyclodextrin cavities provide a hydrophobic environment and hence generate a strong affinity to organic molecules at water-solid interfaces. Indeed, the formation constant (K) of polymeric cyclodextrins and organic guest molecules is more than eight orders of magnitude larger than molecular cyclodextrin systems in water, and yet the process is completely reversible in organic solvents such as ethanol. The significant potential of these results is that hazardous organic contaminants may be reduced to parts-per-trillion levels in water by these polymers, as measured by ion-trap mass spectroscopy and UV-visible spectroscopy.     

城市蓝天保卫战行动协同控制局地大气污染物和温室气体效果评估——以唐山市为例

为满足在城市层面开展蓝天保卫战行动、协同控制局地大气污染物和温室气体效果评估的管理需求,本文构建了评估方法体系,明确了评估流程,并梳理了评估参数获取途径。本文所推荐的协同减排量核算方法和协同控制效果评估方法包括:采用排放因子法计算各措施的单项大气污染物和单项温室气体减排量,计算各措施的局地大气污染物当量(LAPeq)和二氧化碳当量(CO_2-eq)减排效果,进而采用协同控制效应坐标系分析和协同控制交叉弹性分析开展协同控制效果评估。本文以唐山市2018年蓝天保卫战行动为案例,选择12项子措施开展试点评估,结果显示:这12项子措施在减排LAPeq 13 840.89 t/a的同时,可协同减排温室气体1 009.43万t CO_2-eq/a;所评估的措施均位于协同控制效应坐标系第一象限;协同控制交叉弹性Els CO2-eq/LAPeq为6.66,即每减排1个百分点的LAPeq,可协同减排6.66个百分点的温室气体。研究表明,本文所提出的评估方法体系具有较好的适用性,可推广应用于城市蓝天保卫战行动协同控制局地大气污染物和温室气体评估工作中。     

The Effectiveness of Management Interventions Used to Control Ragwort Species

Ragwort (Senecio jacobaea and S. aquaticus) causes major losses to agricultural revenue and induces livestock morbidity throughout parts of Europe, North America, and Australasia. The introduction of legislation in the U.K. and Australia has meant that landowners can be prosecuted if the plant spreads to adjacent land, which has led to an increase in activities attempting to control these species. Commonly used interventions include natural enemies, herbicide applications, manual and mechanical removal. Through the use of explicit systematic methodology involving comprehensive searches and detailed inclusion criteria, data from primary research are collated for each type of intervention. Meta-analyses show that 2,4-D, Asulam, Clopyralid, and MCPA are effective at reducing ragwort densities. However, when the datasets were analysed for their effectiveness against individual species, 2,4-D and MCPA were only effective against S. jacobaea, while Asulam was only effective against S. aquaticus. Natural enemies Longitarsus jacobaeae and a combination of L. jacobaeae and Tyria jacobaeae appear to have the potential to reduce S. jacobaea densities. Only applying T. jacobaeae does not appear to significantly reduce S. jacobaea densities, but does reduce the number of capitula per plant, seeds per capitula, viability of seeds, and dry weight of the plants. There is insufficient experimental evidence available to assess other interventions such as manual or mechanical removal. Further research into these types of interventions is recommended, as well as more detailed reporting of site characteristics and experimental design to allow full investigation of each intervention to explain possible reasons for variations in their effectiveness.     

Copper release from chemical root-control baskets in hardwood tree production

The City of Montreal, Canada, evaluated the environmental impact and usefulness of in-ground copper (Cu)-treated baskets in controlling root growth of hardwood trees in nursery culture. Using baskets planted with 5-yr-old Norway maple (Acer platanoides L.) trees, the amount and temporal pattern of Cu release from the basket surface into soil was determined for two copper formulations: Cu metal powder and Cu(OH)2. Release of both Cu formulations from the basket surface decreased exponentially over time, with Cu concentration at the basket surface dropping to 2% of the initial Cu applied by the end of the second field season. Total Cu content increased significantly in the soil around the baskets (from 7 to 28 mg Cu kg(-1) soil) and in the baskets (from 7 to 50-70 mg Cu kg(-1) soil) over the two years of the study. Three levels of phosphorus application (33, 66, and 100% of the regular nursery rate of 465 kg ha(-1) yr(-1)) did not affect release of Cu from the basket surface. The release of Cu metal at 28 and 105 d in the field was significantly increased by inoculation with the symbiotic arbuscular mycorrhizal fungus (AMF) Glomus intraradices Schenck & Smith; however, AMF inoculation had no affect on Cu(OH)2 release. Trees grown in Cu-treated baskets and inoculated with G. intraradices had similar colonization to non-inoculated trees, suggesting that inoculation was not very effective and that AMF inoculum was already present in the root ball of the trees at planting. After two years, copper basket-grown trees had significantly less root colonization than isolated control trees growing in the open field. This strongly suggests that conditions inside the baskets were not favorable to AMF.     

Applicability of a Septic Tank/Engineered Wetland Coupled System in the Treatment and Recycling of Wastewater from a Small Community

A septic tank (ST)/engineered wetland coupled system used to treat and recycle wastewater from a small community in Dar es Salaam, Tanzania was monitored to assess its performance. The engineered wetland system (EWS) had two parallel units each with two serial beds packed with different sizes of media and vegetated differently. The larger-sized medium bed was upstream and was planted with Phragmites (reeds) and the smaller-sized medium bed was downstream and was planted with Typha (cattails). The ST/EWS coupled system was able to remove ammonia by an average of 60%, nitrate by 71%, sulfate by 55%, chemical oxygen demand by 91%, and fecal coliform as well as total coliform by almost 100%. The effluent from the ST/EWS coupled system is used for irrigation. Notably, users of the recycled irrigation water do not harbor any negative feelings about it. This study demonstrates that it is possible to treat and recycle domestic wastewater using ST/EWS coupled systems. The study also brings attention to the fact that an ST/EWS coupled system has operation and maintenance (O&M) needs that must be fulfilled for its effectiveness and acceptability. These include removal of unwanted weeds, harvesting of wetland plants when the EWS becomes unappealingly bushy, and routine repair.     

Assessment of the Effectiveness of Environmental Dredging in South Lake,China

Environmental dredging is a primary remedial option for removal of the contaminated material from aquatic environment. Of primary concern in environmental dredging is the effectiveness of the intended sediment removal. A 5-year field monitoring study was conducted to assess the effectiveness of the environmental dredging in South Lake, China. The concentrations of total nitrogen (TN), total phosphors, and heavy metals (Zn, Pb, Cd, Cu, Cr, Ni, Hg, and As) before and after dredging in sediment were determined and compared. Multiple ecological risk indices were employed to assess the contamination of heavy metals before and after dredging. Our results showed that the total phosphorus levels reduced 42% after dredging. Similar changes for Hg, Zn, As Pb, Cd, Cu, Cr, and Ni were observed, with reduction percentages of 97.0, 93.1, 82.6, 63.9, 52.7, 50.1, 32.0, and 23.6, respectively, and the quality of sediment improved based on the criterion of Sediment Quality Guidelines by USEPA and contamination degree values (C_d) decreased significantly (paired t-test, p < 0.05). Unexpectedly, the TN increased 49% after dredging compared to before dredging. Findings from the study demonstrated that the environmental dredging was an effective mechanism for removal of total phosphorus and heavy metals from South Lake. Nevertheless, the dredging was ineffective to remove total nitrogen from sediment. We conclude that the reason for the observed increase in TN after dredging was likely ammonia release from the sediment impairing the dredging effectiveness.     

控释尿素不同施用条件下冬小麦产量和氮素利用效应

采用田间试验方法研究了控释尿素不同施用条件对冬小麦产量、氮素利用和经济效益的影响。试验共设7个处理,即CK （空白处理,不施氮肥）、100%PU10/0（普通尿素全量基施,N 240 kg＆#183;hm-2）、100%PU6/4（60%的普通尿素基施、40%的普通尿素于拔节期追施,N 240 kg＆#183;hm-2）、80%PU6/4（60%的普通尿素基施、40%的普通尿素于拔节期追施,N 192 kg＆#183;hm-2）、100%CRU（全量树脂包膜控释尿素基施,N 240 kg＆#183;hm-2）、80%CRU（80%树脂包膜控释尿素基施,N 192 kg＆#183;hm-2）和40%CRU＋40%PU（40%树脂包膜控释尿素＋40%的普通尿素基施,N 192 kg＆#183;hm-2）。结果表明,无论是产量效应还是氮素利用效应,树脂包膜控释尿素（CRU）处理总体优于普通尿素（PU）处理,尤其树脂包膜控释尿素和普通尿素配施（40%CRU＋40%PU）效果最佳,以7709 kg＆#183;hm-2的产量、36.44%的氮肥吸收利用率、15946元＆#183;hm-2的相对净收入达到处理间最高水平。该处理在减少氮素投入量的情况下,不仅促进了冬小麦增产,而且显著提高了肥料的利用率,拥有较高的产投比。因此,树脂包膜控释尿素和普通尿素的配施处理（40%CRU＋40%PU）是本试验条件下最优的氮肥处理。     

Monitoring effects of a controlled subsurface carbon dioxide release on vegetation using a hyperspectral imager

A hyperspectral imaging system was used to monitor vegetation during a subsurface controlled release of carbon dioxide (CO₂). From August 3 to 10, 2007, 0.3 tons CO₂/day were released through a 70 m horizontal pipe located at a nominal depth of 1.8 m below the surface. Hyperspectral images of alfalfa plants were collected during the controlled release and used along with classification tree analysis to study changes in the reflectance spectra as a function of perpendicular distance from the horizontal pipe. Changes in the reflectance spectra near the red edge (650–750 nm) were observed over the course of the controlled release experiment for plants within a perpendicular distance of 1 m of the release pipe. These results indicate monitoring vegetation over a carbon sequestration site has the potential to allow monitoring of the integrity of the CO₂ storage.     

Accurate power-sharing,voltage regulation,and SOC regulation for LVDC microgrid with hybrid energy storage system using artificial neural network

ABSTRACT

In this paper, an artificial neural network-based control strategy is proposed for low voltage DC microgrid (LVDC microgrid) with a hybrid energy storage system (HESS) to improve power-sharing between battery and supercapacitor (SC) to suit the demand-generation imbalance, maintain state-of-charge (SOC) within boundaries and thereby to regulate the dc bus voltage. The conventional controller cannot track the SCs current rapidly with the high-frequency component that will place dynamic stress on the battery, further resulting in shorter battery life. The significant advantage is that in the proposed control strategy, redirections of unwaged battery currents to SCs for fast compensations enhance battery life span. The proposed control strategy effectiveness was investigated by simulations, including a comparison of overshoot/undershoot and settling time in dc bus voltage with a conventional control strategy. The results have been experimentally verified by hardware-in-loop (HIL) on a field-programmable gate array (FPGA)-based real-time simulator.     

The Impact of Dynamic Environmental Flow Releases on Hydropower Production in the Zambezi River Basin

Incorporation of environmental flow releases from reservoirs has proven to be challenging due to fear of losses to existing water uses. Moreover environmental flow requirements (EFR) have not often been operationalized. This study compares the possibility of implementing dynamic EFR based on natural flows lagged against an upstream unregulated gauging point with static EFR. It simulates different scenarios with a high flow release in the wet season and analyses its impacts on hydropower production. This method accounts fully for the natural variability of environmental flows, implying less pressure on existing water uses during relatively dry years. Joint operation of two cascading dams vs. individual operation for EFR was also explored. These approaches were tested for the Zambezi River basin in Southern Africa using a water resources model, WAFLEX. Historic data on reservoir water levels, releases and power generation of the hydropower schemes were synthesized. Combining these yielded a validated series of monthly flow data for a 28 year period (1982‐2010). The results show that Kariba and Cahora Bassa reservoirs face a reduction in power produced when they would annually release an environmental flow. However, the dynamic EFR method entails smaller hydropower losses. Joint environmental flow operations will reduce overall basin power production more than if Cahora Bassa alone would release an environmental flow. However, such joint operation would be more beneficial to the ecosystem.     

Experimental Investigation on the Removal of Toner Particles from Laser-Printed Office Waste Papers

Abstract

In this work the deinking process was simulated in a small high speed blender of about 2 L capacity. The effects of polyethylene (PE) and wax-coated PE on the removal of toner particles in the pulper slurry has been experimentally investigated. The effect of one commercial surfactant (30% anionic, 5% nonionic) on the toner release efficiency was also studied. The average area of toner particles retained on filter papers were determined using an image analysis system that consists of a high-resolution video camera mounted on an optical polarizing microscope, an image software processor, a Pentium PC, and a high-resolution image monitor. The effect of low density PE on toner detachment from laser-printed standard paper was investigated over a concentration range of 0 –200% PE (relative to paper mass). It is found that PE has a certain capabilty of removing (adsorbing) toner particles. In the second phase of this research work, the effect of wax-coated PE was investigated. It was found that wax-coated PE enhances the removal of toner particles beyond that obtained using only PE. Finally, the effect of a commercial surfactant on the release of toner particles have been investigated over a range of surfactant mass percentage (relative to the paper mass).     

Effects of thermal barrier coating on the performance and combustion characteristics of a diesel engine fueled with biodiesel produced from waste frying cottonseed oil and ultra-low sulfur diesel

In this study, the top surfaces of piston and valves of a four-strokes and direct-injection diesel engine have been coated—with no change in the compression ratio—with a 100 μm of NiCrAl lining layer via plasma spray method and this layer has later been coated with main coating material with a mixture of 88% of ZrO₂, 4% of MgO and 8% of Al₂O₃ (400 μm). Then, after the engine-coating process, ultra-low sulfur diesel (ULSD) as base fuels and its blend with used frying cottonseed oil derived biodiesel in proportion of 20%, volumetrically, have been tested in the coated engine and data of combustion and performance characteristics on full load and at different speeds have been noted. The results, which were compared with those obtained by uncoated-engine operation, showed that thermal efficiency increased, and engine noise reduced. Cylinder gas pressure values obtained from the diesel engine which has been coated with thermal barriers have been found to be somewhat higher than those of the uncoated-engine. Also, maximum pressure values measured in both engines and under the same experimental conditions through the use of test fuel have been obtained after TDC. Moreover, heat release rate and heat release have occurred earlier in the coated-engine. NOx emissions were increased while CO and HC emissions were remained almost the same with a little bit decrease.     

Enhanced nutrient removal by oxidation-reduction potential (ORP) control in laboratory-scale extended aeration reactors

A study was conducted to examine N and P removal by a laboratory-scale extended aeration treatment system employing oxidation-reduction potential (ORP) controlled aeration. The system was provided with a 90-L aeration tank. When ORP controlled aeration was applied, the aeration tank was divided into three zones, namely the ORP zone (45 L), the anaerobic zone (27 L) and the aerobic zone (18 L). An external anoxic selector of 3.8 L in volume was also added. An ORP set point of 70 mV was used for the ORP zone. The extended aeration treatment system operating without the ORP controlled aeration was used as the control.COD removal (97%) was not affected, but both N and P removal were enhanced significantly in the ORP reactor. Total N removal efficiency was increased from 49.1% (control) to 83.5%. Almost all P was captured (99%), leaving an average of 0.09 mg L⁻¹ P in the effluent. The ORP reactor yielded a sludge P content of 3.1%, compared to only 1.8% for the control. This indicated luxury P uptake in ORP reactor. Very significant P release and denitrification were found in the anoxic selector. Fairly good simultaneous nitrification and denitrification had occurred in the ORP zone. However, P release was very limited in the anoxic zone. However, anoxic P uptake and nitrification were found in this zone.Low F/M bulking was observed in both the control and ORP operation before the installation of a selector. Bacterial Type 0041 was identified as the predominant bulking organism. For the Control, an aerobic selector cured the bulking problem in one sludge age while an anoxic selector fixed up the problem during the ORP operation.